Array Concept Research Articles

FarView: An in-situ manufactured lunar far side radio array concept for 21-cm Dark Ages cosmology

FarView is an early-stage concept for a large, low-frequency radio observatory, manufactured in-situ on the lunar far side using metals extracted from the lunar regolith. It consists of 100,000 dipole antennas in compact subarrays distributed over a large area but with empty space between subarrays in a core-halo structure. FarView covers a total area of ∼200 km2, has a dense core within the inner ∼36 km2, and a ∼power-law falloff of antenna density out to ∼14 km from the center. With this design, it is relatively easy to identify multiple viable build sites on the lunar far side. The science case for FarView emphasizes the unique capabilities to probe the unexplored Cosmic Dark Ages – identified by the 2020 Astrophysics Decadal Survey as the discovery area for cosmology. FarView will deliver power spectra and tomographic maps tracing the evolution of the Universe from before the birth of the first stars to the beginning of Cosmic Dawn, and potentially provide unique insights into dark matter, early dark energy, neutrino masses, and the physics of inflation. What makes FarView feasible and affordable in the timeframe of the 2030s is that it is manufactured in-situ, utilizing space industrial technologies. This in-situ manufacturing architecture utilizes Earth-built equipment that is transported to the lunar surface to extract metals from the regolith and will use those metals to manufacture most of the array components: dipole antennas, power lines, and silicon solar cell power systems. This approach also enables a long functional lifetime, by permitting servicing and repair of the observatory. The full 100,000 dipole FarView observatory will take 4–8 years to build, depending on the realized performance of the manufacturing elements and the lunar delivery scenario.

Introduction to the Concept and Practice of Using Arrays in Programming Languages ​​at Senior High School 2 Gunung Talang, Solok Regency

Introduction to the Concept and Practice of Using Arrays in Programming Languages ​​is an effort to provide education and guidance to teachers at Senior High School 2 Gunung Talang, Solok who are interested in computer programming. Knowledge of the use of arrays in programming languages ​​is an important basis in the increasingly developing world of information technology. This community service activity aims to provide a broader understanding of the concepts and practices of using arrays in programming languages, especially for those who do not have a technical background in programming. In this activity, participants will be invited to understand the basic concepts of arrays, how to declare, initialize and access array elements in programming languages. This activity will provide an introduction to various types of arrays, such as one-dimensional arrays, two-dimensional arrays, and multidimensional arrays, as well as provide examples of practical use in everyday programming. Participants will also be taught about the benefits of using arrays, including how they can simplify code, increase efficiency, and optimize data management. It is hoped that the results of this service will provide benefits to the community by increasing their understanding of the use of arrays in programming languages. With this knowledge, participants become better prepared to overcome programming challenges and apply them in various fields, such as software development, data analysis, and information technology in general

Large-scale array for radio astronomy on the farside (LARAF).

At the Royal Society meeting in 2023, we have mainly presented our lunar orbit array concept called DSL, and also briefly introduced a concept of a lunar surface array, LARAF. As the DSL concept had been presented before, in this article, we introduce the LARAF. We propose to build an array in the far side of the Moon, with a master station which handles the data collection and processing, and 20 stations with maximum baseline of 10 km. Each station consistsof 12 membrane antenna units, and the stations are connected to the master station by power line and optical fibre. The array will make interferometric observation in the 0.1-50 MHz band during the lunar night, powered by regenerated fuel cells. The whole array can be carried to the lunar surface with a heavy rocket mission, and deployed with a rover in eight months. Such an array would be an important step in the long-term development of lunar-based ultralong wavelength radio astronomy. It has a sufficiently high sensitivity to observe many radio sources in the sky, though still short of the dark age fluctuations. We discuss the possible options in the power supply, data communication, deployment etc. This article is part of a discussion meeting issue 'Astronomy from the Moon: the next decades (part 2)'.

NOMA-based retrodirective frequency diverse array for multi-user communication

Frequency Diverse Array (FDA) and retrodirective array have found applications in wireless communication networks, offering cost-effective and efficient beamforming capabilities. In this paper, a novel concept of the retrodirective frequency diverse array (RFDA) is introduced, which empowers each array element to handle multiple communication channels, thereby enabling support for multiple users. This is made possible by utilizing the non-orthogonal multiple access (NOMA) scheme. The antenna elements are organized in a uniform circular array configuration. The system supports the multitude of users by assigning them into distinct clusters based on the serving antenna and then allocating transmit power to each user based on their respective channel conditions and distances from the base station. Consequently, efficient schemes for user clustering and power allocation tailored to the NOMA-RFDA system are developed. As a result, multi-user connectivity is achieved while maintaining low design costs. The simulation outcomes affirm that the proposed system attains superior performance in terms of both data rate and energy efficiency when compared to similar reference schemes.

Antenna Deembedding in Directional Channel Measurements With Virtual Array Concept and Experimental Validation

Antenna Deembedding in Directional Channel Measurements With Virtual Array Concept and Experimental Validation

A compact SiGe D-band power amplifier for scalable photonic-enabled phased antenna arrays

To address the rising demand for high-speed wireless data links, communication systems operating at frequencies beyond {100},hbox {GHz} are being targeted. A key enabling technology in the development of these wireless systems is the phased antenna array. Yet, the design and implementation of such steerable antenna arrays at frequencies over {100},hbox {GHz} comes with a multitude of challenges. In particular, the cointegration of active electronics at each antenna element poses a major hurdle due to the inherent space constraints in the array. This article proposes a novel scalable concept for opto-electronic phased antenna arrays operating at 140 GHz. It details the system architecture of a transmitter that enables the implementation of large scale, wideband, 2D steerable phased antenna arrays and presents the design and measurement of a compact SiGe power amplifier (PA) chip to be used as one of its key building blocks. The amplifier achieves a gain of 20 dB at 135 GHz, features a P_{1dB} of 14.6 dBm and can support data rates up to 45 Gbps in a limited footprint of only 540μm × 550μm. This makes it one of the fastest, most powerful D-band power amplifiers in literature with a footprint compatible with frac{lambda }{2}-spaced phased array integration.

On-Chip Comparison of the Performance of First- and Second-Generation Micropillar Array Columns.

Because of its dimensions, the recently introduced micropillar array columns are most suited for high-efficiency liquid chromatography separations in proteomics. Unlike the packed bed columns and capillary-based column formats, the micropillar array concept still has significant room to progress in terms of the reduction of its characteristic size (i.e., pillar diameter and interpillar distance) to open the road to even higher-efficiency separations and their applications. We report here on the on-chip comparison between first-generation (Gen 1) and second-generation (Gen 2) micropillar array columns wherein the pillar and interpillar size have been halved. Because of the on-chip measurements, the observed plate heights H represent the fundamental band broadening, devoid of any extra-column band-broadening effects. The observed reduction of H with a factor of 2 around the uopt-velocity and with a factor of 4 in the C-term dominated regime of the van Deemter-curve is in full agreement with the theoretically expected gain. This shows the pillar and interpillar size reduction could be effectuated without affecting the theoretical separation potential of the micropillar arrays. Compared to Gen 1, Gen 2 offers a 4-fold reduction of the required analysis time around the optimal velocity and about a 16-fold reduction in the C-term-dominated range.

An Object Tuple Model for Understanding Pointer and Array in C Language

<italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Contribution:</i> In this study, an object tuple model has been proposed, and a quasi-experimental study on its usage in an introductory programming language course has been reported. This work can be adopted by all C language teachers and students in learning pointer and array-related concepts. <p xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <i>Background:</i> C language has been extensively employed in numerous universities as an introductory programming practice. However, the pointer and array have long been recognized as some of the most difficult concepts for novice students learning C language. To help students become familiar with the concept of pointer and array and also their related operations, a comprehensive understanding from memory management’s perspective might be helpful. <p xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <i>Research Questions:</i> 1) How does the object tuple model help students understand all kinds of object types from a generalized perspective? 2) Why is it important to let the students consider multiple arrays from a 1-D perspective? and 3) How do the memory-oriented operations from the object’s perspective help students comprehensively understand the pointer and array? <p xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <i>Methodology:</i> The students were divided into experimental and control groups, and the object tuple model was presented in the experimental group. An examination was conducted at end of the semester, and test data were gathered for further analysis. <p xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <i>Findings:</i> The proposed object tuple model is effective in giving students clear guidance and helping them further understand the pointer and array in C language.

A Paper-Based Biomimetic Sensing Device for the Discrimination of Original and Fraudulent Cigarette Brands Using Mixtures of MoS2 Quantum Dots and Organic Dyes.

In this study, we investigated the combined effects of MoS2 QDs' catalytic properties and the colorimetric responses of organic reagents to create a sniffing device based on the sensor array concept of the mammalian olfactory system. The aim was to differentiate the volatile organic compounds (VOCs) present in cigarette smoke. The designed optical nose device was utilized for the classification of various cigarette VOCs. Unsupervised Principal Component Analysis (PCA) and supervised Linear Discriminant Analysis (LDA) methods were employed for data analysis. The LDA analysis showed promising results, with 100% accuracy in both training and cross-validation. To validate the sensor's performance, we assessed its ability to discriminate between five cigarette brands, achieving 100% accuracy in the training set and 82% in the cross-validation set. Additionally, we focused on studying four popular Iranian cigarette brands (Bahman Kootah, Omega, Montana Gold, and Williams), including fraudulent samples. Impressively, the developed sensor array achieved a perfect 100% accuracy in distinguishing these brands and detecting fraud. We further analyzed a total of 126 cigarette samples, including both original and fraudulent ones, using LDA with a matrix size of (126 × 27). The resulting LDA model demonstrated an accuracy of 98%. Our proposed analytical procedure is characterized by its efficiency, affordability, user-friendliness, and reliability. The selectivity exhibited by the developed sensor array positions it as a valuable tool for differentiating between original and counterfeit cigarettes, thus aiding in border control efforts worldwide.

An Extremely Wideband Tightly Coupled Dipole Array With Shared-Aperture Configuration

The intent of this letter is to expand the tightly coupled dipole array (TCDA) concept in a shared-aperture configuration for high radiation efficiency and extremely wide bandwidth. Specifically, a high-band TCDA is deployed beneath the aperture of a low-band TCDA. With this configuration, the profile height keeps the same as that of a stand-alone low-band TCDA. It offers a thin λ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">L</sub> /13.7 (or 1.7λ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">H</sub> ) array with 23.2:1 bandwidth for active VSWR < 3, where λ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">L</sub> and λ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">H</sub> are the wavelengths at the lowest and highest frequencies of the operating frequency band. Although the shared-aperture configuration is profit for low profile and bandwidth extension, it causes cross-band coupling and deteriorates radiation performance. To solve this issue, the low-band TCDA is designed to be electromagnetic transparent to the high-band electromagnetic waves. The two TCDAs become immune to the cross-band interference and operate properly as in their stand-alone cases. An array prototype consisting of a 16 × 16 high-band array and an 8 × 8 low-band array is fabricated and measured. The measured radiation efficiency is demonstrated to be 77% on average across a 23.2:1 bandwidth.

Polymeric Microneedles: An Emerging Paradigm for Advanced Biomedical Applications

Microneedles are gaining popularity as a new paradigm in the area of transdermal drug delivery for biomedical and healthcare applications. Efficient drug delivery with minimal invasion is the prime advantage of microneedles. The concept of the microneedle array provides an extensive surface area for efficient drug delivery. Various types of inorganics (silicon, ceramic, metal, etc.) and polymeric materials are used for the fabrication of microneedles. The polymeric microneedles have various advantages over other microneedles fabricated using inorganic material, such as biocompatibility, biodegradation, and non-toxicity. The wide variety of polymers used in microneedle fabrication can provide a broad scope for drug delivery and other biomedical applications. Multiple metallic and polymeric microneedles can be functionalized by polymer coatings for various biomedical applications. The fabrication of polymeric microneedles is shifting from conventional to advanced 3D and 4D printing technology. The multifaceted biomedical applications of polymeric microneedles include drug delivery, vaccine delivery, biosensing, and diagnostic applications. Here, we provide the overview of the current and advanced information on polymers used for fabrication, the selection criteria for polymers, biomedical applications, and the regulatory perspective of polymer-based and polymer-coated microneedles, along with a patent scenario.

RNGA based Centralized PI Controller for Multivariable Non Square Systems using Direct Synthesis Method

Design of centralized PI controllers for multivariable non square systems is proposed in the present work. The centralized controller is designed based on the direct synthesis method. The method includes approximating the inverse of the process transfer matrix with the effective transfer function matrix. The effective transfer function for each element in the process transfer function matrix is derived by using the relative normalized gain array (RNGA), and relative average residence time array (RARTA) concepts proposed by Cai et al [1]. The transfer function models used in the present work include first order processes with time delay (FOPDT). Maclaurin series is applied to reduce the resulting controllers in to standard PI forms. The design method requires a single tuning parameter (filter time constant) to adjust the performance of the controller. Simulation study is carried out for various case studies and the results show the advantage of proposed method over the literature reported methods. The control algorithms are comparatively analyzed using standard robust stability measure. The designed controllers give a good performance with lesser interaction compared to the literature methods, Davison Method [2] and Tanttu and Lieslehto’s method [3].

Low-cost thin film patch antennas and antenna arrays with various background wall materials for indoor wireless communications

The present study introduces an inkjet-printed flexible coplanar waveguide patch antenna array concept. Single antenna and four-element antenna arrays were characterized, which were attached to a subminiature version A connector via an innovative solderless, 3D-printed ‘plug-and-play-type’ tightener. Furthermore, indoor wireless communication and Internet of Things scenarios with commonly used wall materials including gypsum and plywood boards, on which patch antennas and antenna arrays can be attached, were also presented. In order to validate the concept, design and fabrication iterations in parallel with numerical and experimental investigations were executed. To elaborate, single antenna and antenna array configurations without and with wall materials were characterized to see their functionality at 2.4 GHz resonance frequency and beyond 300 MHz bandwidth, respectively. The results demonstrate that the investigated configurations fulfill short-range radio transmission and can be utilized, e.g., for indoor backscattering-type communications and wireless sensing applications, as an affordable and versatile alternative to their conventional counterparts. Being attached to their corresponding background materials, single-antenna specimens were measured to have return losses beyond 18 dB and peak gains around 1 dBi, while higher peak gains above 6 dBi were detected for antenna arrays. Moreover, the antenna arrays can enable multiple-input and multiple-output communication. The proposed arrays had diversity performance in terms of return losses higher than 15 dB, isolation of more than 20 dB, envelope correlation coefficient , diversity gain dB, mean effective gain dB, power ratio factor dB, and channel capacity loss bits/s/Hz.

RECURSIVE TERNARY-BASED ALGORITHM FOR COMPUTING PRIME IMPLICANTS OF MULTI-OUTPUT BOOLEAN FUNCTIONS

The problem of computing the set of prime implicants to represent a Boolean function is a classical problem that is still considered a running problem for research because all known approaches have limitations. The article reviews existing methods for computing prime implicants and highlights their limitations, particularly for multi-output functions and limited scalability due to the growth in memory required to complete the computation. Then it proposes a recursive ternary-based minimization algorithm to compute the prime implicants of multi-output Boolean functions. The algorithm is based on the concept of Programmable Logic Array (PLA) tables, which provide a structured and efficient representation of Boolean functions. The algorithm takes advantage of the ternary logic system to efficiently compute the prime implicants while maintaining scalability for large and complex functions, which has significant implications for digital circuit design and optimization.

Managing the Hyflex Scheduling Activity Using Excel Dynamic Arrays

The COVID-19 pandemic has forced the rapid adoption of remote teaching modalities including “hyflex” where students attend some class sessions in person and some online. Managing the hyflex course requires faculty to quickly generate several reports and to update these reports rapidly when the authorities adjust the rules, students add/drop, or the number of course sessions is changed. The creation of these reports is tedious and error-prone, so they need to be automated. However, the nature of the task precludes traditional Excel programming approaches. We use Excel’s new “dynamic array” capabilities (which are available only in Excel 365) to automate the creation and updating of the reports needed to manage the hyflex course. We show how to program the reports, and we discuss the importance of taking an iterative approach to creating effective, error-free cell formulas. To help the reader acquire genuine access to the dynamic array functions, we provide a practical tutorial on the principles and new concepts of dynamic arrays, explain how they relate to legacy array functions, and present selected dynamic array functions including SEQUENCE, FILTER, and XLOOKUP.

Film-Shaped Self-Powered Electro-Osmotic Micropump Array.

This paper reports a new concept of a film-shaped micropump array for biomedical perfusion. The detailed concept, design, fabrication process, and performance evaluation using prototypes are described. In this micropump array, an open circuit potential (OCP) is generated by a planar biofuel cell (BFC), which in turn generates electro-osmotic flows (EOFs) in multiple through-holes arranged perpendicular to the micropump plane. The micropump array is thin and wireless, so it can be cut like postage stamps, easily installed in any small location, and can act as a planar micropump in solutions containing the biofuels glucose and oxygen. Perfusion at local sites are difficult with conventional techniques using multiple separate components such as micropumps and energy sources. This micropump array is expected to be applied to the perfusion of biological fluids in small locations near or inside cultured cells, cultured tissues, living organisms, and so on.

Dual Functional Full-Color Carbon Dot-Based Organelle Biosensor Array for Visualization of Lipid Droplet Subgroups with Varying Lipid Composition in Living Cells.

In situ visualization of lipid composition diversity in lipid droplets (LDs) is essential for decoding lipid metabolism and function. However, effective probes for simultaneously localizing and reflecting the lipid composition of LDs are currently lacking. Here, we synthesized full-color bifunctional carbon dots (CDs) that can target LDs as well as respond to the nuance in internal lipid compositions with highly sensitive fluorescence signals, due to lipophilicity and surface state luminescence. Combined with microscopic imaging, uniform manifold approximation and projection, and sensor array concept, the capacity of cells to produce and maintain LD subgroups with varying lipid composition was clarified. Moreover, in oxidative stress cells, LDs with characteristic lipid compositions were deployed around mitochondria, and the proportion of LD subgroups changed, which gradually disappeared when treated with oxidative stress therapeutics. The CDs demonstrate great potential for in situ investigation of the LD subgroups and metabolic regulations.

Programmable Metasurface Hybrid MIMO Beamforming: Channel Estimation, Data Transmission, and System Implementations at 28 GHz

With the development of wireless communication generations, multiple-input and multiple-output (MIMO) architectures have proven to be a solution to the higher required data rates for the increasing number of mobile users. As a matter of fact, better earnings can be gathered from a low-cost system with effective functions, which results in the hybrid beamforming architecture combining digital chains with large-scale antenna arrays. The programmable metasurface (PM) is a promising antenna array concept that realizes reconfigurable beamforming. It is raised to be an attractive antenna array architecture due to its low price and power consumption. However, experimental investigations combining PMs with modern wireless communication systems have not been intensively studied. Its challenges and difficulties of signal processing and system implementation remain uncertainties to be discovered. In this article, a PM hybrid MIMO beamforming system including the aforementioned important topics is presented as follows. First of all, the hybrid beamforming channel estimation algorithm adapted for PM is created by merging analog beam training and digital interleaved orthogonal frequency division multiplexing. Afterward, data transmissions based on the estimated channel state information utilizes variant signal recovery methods to examine the channel estimation accuracy and system feasibilities. To practically analyze the proposed system, the aforementioned aspects are implemented into system-level experiments using three PMs operating at 28 GHz for downlink wireless communication in both single-user and multiuser scenarios. Proper results are delivered, which successfully prove the PM hybrid MIMO beamforming system functionalities.

Uniform Linear Antenna Array Beamsteering Based on Phase-Locked Loops

Phased arrays are extensively used in many modern beam-scanning applications such as radar and satellite communications. Electronic beam scanning makes phased arrays an important aspect of modern antenna array systems. This Tutorial aims to promote the basic understanding of the principle and operation of a phased array to general undergraduate students. This paper starts with a discussion on the theory of operation and some basic definitions of antenna parameters followed by derivations of two-element and N-element array patterns and, finally, a five-element array design. The essential hardware based on Phase-Locked Loops (PLLs) as phase controllable RF sources required to build an array and the basic tools required for software and measurement set-up to demonstrate the beam-scanning phased array operation are presented. This enables students to quickly understand and set-up an experiment to verify the phased array operation with commercial off-the-shelf components. In addition, the hardware and software necessary for autonomous control are discussed. By combining basic concepts of phase arrays with a series of simple coding and intuitive laboratory experiments, students can easily understand the Uniform Linear Array (ULA) scanning operation.

Scalable Antenna Arrays Featuring Stable Radiation Pattern in Multioctave Bandwidth

This article proposes a novel concept of antenna arrays operating in the multiple-octave frequency range. The antenna arrays ensure steady half-power beamwidth (HPBW) in <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$2^{N}$ </tex-math></inline-formula> :1 bandwidth (BW) due to the proper placement of radiating elements and appropriate signal switching between them. The proposed arrays consist of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$N+1$ </tex-math></inline-formula> centered subarrays that are electrically similar at successive frequencies. The antenna arrays are fed by networks composed of power dividers and directional filters responsible for gradual RF power shift from the elements operating at the lowest frequency to the elements operating at the highest frequency. The directional filters utilize the same properly scaled switching function for every frequency octave in the operational frequency range. The presented concept has been verified by the design of antenna arrays operating over 1.2–4.8 (4:1 BW) and 1.2–9.6 GHz (8:1 BW) frequency ranges.