Concept Of Reuse Research Articles

Environmental savings from concrete reuse: examining the limitations and optimal practices for cutting thresholds of concrete building components for reuse

Abstract Concrete, a widely used construction material, presents both opportunities and challenges for promoting environmentally responsible practices. This research focuses on the concept of concrete reuse as a sustainable strategy, examining the limitations of cutting dimensions. To investigate the greenhouse gas (GHG) emissions associated with preparing concrete for reuse, a mathematical model was developed considering several factors, such as transportation emissions, energy used in cutting, and the effects of varying cutting performance and energy sources. By incorporating real-life data and connecting with industrial practices, this study establishes a screening standard to determine the minimum cutting size for concrete reuse. The results indicate that the ratio of transportation distances for the reuse case versus the new production of concrete case has an influence on the minimum cutting size for concrete reuse. Moreover, the cutting size itself significantly impacts the overall GHG emissions of the reuse strategy. We offer practical insights for industry stakeholders to optimize concrete reuse practices and effectively reduce GHG emissions. As further research explores cost-effectiveness and on-site case studies, the potential for large-scale implementation of concrete reuse has become increasingly promising. Thus, concrete reuse has emerged as a viable and effective approach to sustainable construction, provided that the minimum cutting dimensions are carefully considered.

Circular Economy Principles in the Regulatory Oversight of the Management of By- Products – Case Study: Tin Slag 2

The tin processing industry generates abundant slag, as a by-product, that contains radioactive substances from uranium and thorium decay series radionuclides. The increase in tin production will be proportional to the rise in tin slag. The Circular economy is a concept that aims to minimize the extraction of primary resources, keep resources as long as possible, increase added value, or limit the final disposal of waste. The concept of reuse, recycling, or reprocessing is part of the concept. This paper aims to identify aspects of the existing regulations in Indonesia that support circular economy principles in the management of by-products, such as tin slag 2. The methodology used in this paper is a literature study of regulations, international recommendations, and related research. Based on the measurements of tin slag 2 samples originating from Bangka Belitung Province, the main chemical constituents based on XRF analysis are SiO2, CaO, MgO, Fe2O3, and TiO2. The activity concentration of a tin slag 2 sample showed a value that exceeded the criterion of 1 Bq/gram for the radionuclides in the uranium and thorium decay series. From a material perspective, tin slag 2 can be reused or recycled for specific purposes. Various studies have proven the performance of tin slag 2 as a partial substitution of fine aggregate or cement in manufacturing mortar or concrete. The identification shows that several existing regulations in Indonesia explicitly and implicitly regulate the provisions of the circular economy concept. According to the Ministry of Environment and Forestry regulations, by-products with activity concentrations of less than 1 Bq/gram can be used as raw material, raw material substitution, energy source substitution, and other uses. Meanwhile, the by-products with activity concentrations of more than 1 Bq/gram are challenging as the provisions of by-products with a value of more than 1 Bq/gram are regulated in BAPETEN Regulation No. 16 of 2013 (currently in the revision stage). BAPETEN Regulation No. 16 of 2013 explains that by-products can be utilized for certain activities. However, the regulation must explain the terms and criteria for reusing by-products. Provisions of by-product processing, as stipulated in GR No. 52 of 2022, are limited to extracting nuclear minerals such as uranium and thorium. So, the meaning of processing in GR No. 52 of 2022 and provisions for reuse previously contained in BAPETEN Regulation No. 16 of 2013 have different meanings. Keywords: circular economy, by-product, tin, slag 2, radioactive substances, nuclear minerals

Optimized Decentralized Reward Distribution(1)

In DeFi (Decentralized Finance) applications, and in dApps (Decentralized Application) generally, it is common to periodically pay interest to users as an incentive, or periodically collect a penalty from them as a deterrent. If we view the penalty as a negative reward, both the interest and penalty problems come down to the problem of distributing rewards. Reward distribution is quite accomplishable in financial management where general computers are used, but on a blockchain, where computational resources are inherently expensive and the amount of computation per transaction is absolutely limited with a predefined, uniform quota, not only do the system administrators have to pay heavy gas fees if they handle rewards of many users one by one, but the transaction may also be terminated on the way. The computational quota makes it impossible to guarantee processing an unknown number of users. We propose novel algorithms that solve Simple Interest, Simple Burn, Compound Interest, and Compound Burn tasks, which are typical components of DeFi applications. If we put numerical errors aside, these algorithms realize accurate distribution of rewards to an unknown number of users with no approximation, while adhering to the computational quota per transaction. For those who might already be using similar algorithms, we prove the algorithms rigorously so that they can be transparently presented to users. We also introduce reusable concepts and notations in decentralized reasoning, and demonstrate how they can be efficiently used. We demonstrate, through simulated tests spanning over 128 simulated years, that the numerical errors do not grow to a dangerous level.

Willow catkins-assisted synthesis of ZnFe2O4/ZnO hetero-tubes for chemiresistive dibutylamine sensors operated at 130 °C

The chemiresistive sensors have enabled the sensing of diverse organoamines, but the low-temperature detection of highly carcinogenic and combustible dibutylamine (DBA) has not been achieved to date. Herein, based on the concept of waste reuse and sustainable development, the discarded willow catkins were served as biotemplates and soaked into zinc or iron nitrates and their mixed solution. The above precursors were calcined at 500 °C in the air to controllably synthesize two homo-tubes and two ZnFe2O4/ZnO hetero-tubes, all of which are assembled by uniform nanoparticles. Among, the 1.25 at% ZnFe2O4/ZnO hetero-tubes possess uniform mesoporous distribution, high content of adsorbed oxygen species, and catalytic sites of high-valent Fe4+ Lewis acid, thus realizing the first metal oxide-based sensor with excellent trace DBA sensing at low temperature. The 1.25 at% ZnFe2O4/ZnO sensor exhibits high response of 79–100 ppm DBA at low 133 °C, which is 1.4, 1.8 and 2.3 times higher than those of 3.2 at% ZnFe2O4/ZnO, ZnO and ZnFe2O4 tubes, respectively. Furthermore, it also behaves rapid response kinetics (11 s∼10 ppm), good humidity resistance, reliable long-term stability (60 days), and the ability to actually detect prometryn herbicide. In addition, its response mechanism for the enhanced DBA sensing was investigated.

Innovations in architectural and environmental design: From methodologies to technology and cultural sensitivity

This comprehensive paper delves into the multifaceted world of contemporary architectural and environmental design, exploring an array of methodologies that emphasize sustainability, technological innovation, and socio-cultural integration. It begins by discussing the Integrated Design Process (IDP), which fosters early-stage collaboration across various disciplines, illustrated by the example of Seattles Bullitt Center. The paper then explores the principles of Biophilic Design, highlighting its positive impacts on human health and well-being, as seen in Singapores Khoo Teck Puat Hospital. The concept of Adaptive Reuse is explored next, emphasizing its role in sustainable urban development, with the Tate Modern in London serving as a case study. Further, the paper examines Green Building Technologies, Digital Design and Simulation Tools like BIM, and Smart Building Systems, showcasing their contributions to sustainable and efficient building management. The final sections discuss the importance of Community Engagement, Cultural Sensitivity in Design, and Inclusive Design, stressing the need for architecture that resonates with community values and is accessible to all. Through these discussions, the paper provides an insightful look into the current trends and future directions in architecture and environmental design, advocating for a holistic approach that balances functionality, sustainability, and cultural relevance.

Role of Biomass Gasification in Achieving Circular Economy

Growing awareness of environmental concerns and the prioritisation of environmental stewardship necessitates the incorporation of sustainability practices that are both economical and profitable. This involves transforming existing industrial practices from the ‘take-make-waste’ approach to one that aligns with the principles of a circular economy. This includes the use and restoration of bioreserves or the cycling of products in a manner that minimizes waste generation by employing the concepts of reuse and recycling. The adoption of circular economy principles is especially critical in energy-intensive industries, and there is increased attention to implementing these principles through biomass gasification. Various methodologies exist for utilizing the potential of biomass by employing biomass gasification to achieve the desired levels of energy output. Techniques incorporating circular economy principles for biomass gasification have become increasingly sought after and achieved widespread implementation in the past few decades. In this paper, we examine the principle of a circular economy and how biomass gasification can be leveraged in processes requiring high-energy input to achieve the same.

Medication reuse programs: a narrative review of the literature.

A proportion of returned medications may potentially meet quality standards to be reused safely. In Australia, there is no regulatory guidance available to facilitate such medication reuse. This narrative review aimed to identify and review international literature describing medication reuse programs to provide insight into their implementation and potential barriers. Using the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) -based guidelines, a literature search was conducted in Medline, Scopus, and Embase using key words such as 'medication' and 'reuse' to identify relevant articles. Two reviewers ascertained eligibility for inclusion. Inclusion criteria included English language and publication after 2010. From the articles selected, identified international medication reuse programs and relevant regulatory aspects were summarized. Details, both regulatory and operational, for the specific medication reuse programs, described in the selected articles was further explored via a grey literature search. Of the 1973 identified articles, 84 were assessed for eligibility and 17 were included in this review. Of these, 14 described scenarios where medication reuse is prohibited, 2 studies described programs allowing the reuse of medication and 1 study did not discuss whether reuse was prohibited or not. From these primary articles, secondary citations were identified, with eight from gray literature. Barriers to medication reuse included exposure to environmental extremes during storage, physical appearance, evidence of tampering, safety, and efficacy concerns for the returned medication. Programs that exist globally have overcome these barriers. Several programs that provide safe and effective reuse of medications were i© The Author(s) 2024. Published by Oxford University Press on behalf of International Society for Quality in Health Care. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site-for further information please contact journals.permissions@oup.com.dentified and described. The findings described in this review should be used to inform frameworks for legislative, regulatory, and professional practice change for medication reuse. Measures implemented in the UK's pandemic response to safely reuse medications in the nursing home and hospice settings and European medication donation programs should be further investigated. The concept of medication reuse is not novel and should be considered for the Australian setting.

Mapping to IEC 61508 the hardware safety integrity of elements developed to ISO 26262

Over the years, several functional safety standards for industries that handle safety electrical, electronic and electromechanical systems have been developed from IEC 61508 (generic). These include ISO 26262 (automotive), IEC 61511 (process), EN 50129 (railway), IEC 620621 (machinery), IEC 61513 (nuclear), etc. The emergence of these standards gives to the associated industries domain-specific identities. However, in certain cases, the rate of updating the standards is greatly overtaken by the rapid evolution of new technologies with a high potential to obsolete existing designs. Besides, IEC 61508-based critical components may experience shortage in the event of a global disaster as seen during the Covid-19 pandemic, hence the need for a robust substitution means. To address these problems, the concept of cross-domain reuse of resources is being promoted between industries that have unequal pace of alignment to the state-of-the-art. However, the framework for domain-to-domain (D2D) exchange must be clearly defined to avoid confusion. The objective of this paper is to investigate whether and how safety levels defined in ISO 26262 (automotive) can be mapped to safety levels in IEC 61508. The paper builds on review of literature and standards and is delimited to hardware elements.

Rainwater Treatment and Reuse Using Membrane Technology

The concept and acceptance of water reuse has steadily increased, particularly in regions that rely on unpredictable water supplies and in industrial applications that benefit from a secondary source of recycled process water. Due to the current global water scarcity crisis, addressing the pressing need for ensuring water safety and sustainable usage has become paramount. Rainwater, as a clean energy source, presents a crucial avenue for consideration in terms of treatment and reuse methods. Membrane technology, known for its compact size, effective treatment capabilities, and affordability, has emerged as a favored approach for wastewater treatment and is increasingly gaining attention in rainwater treatment. This review aims to examine past research on rainwater treatment using membrane technology, identifying key research gaps to guide future exploration and technological advancements. It provides a comprehensive overview of various membrane technologies employed in rainwater treatment, analyzing post-treatment water quality and practical feasibility. Membrane fouling is recognized as a primary challenge, yet ongoing research is delving into surface modifications and process optimizations to mitigate this issue. Moreover, the quest for novel membrane materials and the investigation of diverse technology combinations for rainwater treatment remain active areas of study. The potential future applications of these efforts hold promise for addressing water scarcity concerns.

A Bibliometric Analysis on The Development of The Second-Hand Market Literature Over the Last 30 Years

There is a growing interest in second-hand products among both researchers and practitioners. Therefore, this study aims to explore the growth of the second-hand market in the literature to enlighten the literature development on the subject. In this respect, a bibliometric examination of research in the literature on the notion of the second-hand market from the past to the present was performed. A total of 235 documents were examined for the study. The results show that second-hand consumption has emerged as a new type of consumer behavior, and later examined as a business model in the literature, and with the increasing importance of sustainability in both academic and practical fields, it has become a considerable consumption style. Second-hand products created an important market with more emphasis on the sustainability aspect. The most frequently repeated term in studies on the second is circular economy. Studies on second-hand clothing, collaborative consumption, sharing economy, and reuse concepts have increased in the last few years. The findings are intended to benefit both the literature and second-hand retailers.

INFORMEDQX: Informed Conflict Detection for Over-Constrained Problems

Conflict detection is relevant in various application scenarios, ranging from interactive decision-making to the diagnosis of faulty knowledge bases. Conflicts can be regarded as sets of constraints that cause an inconsistency. In many scenarios (e.g., constraint-based configuration), conflicts are repeatedly determined for the same or similar sets of constraints. This misses out on the valuable opportunity for leveraging knowledge reuse and related potential performance improvements, which are extremely important, specifically interactive constraint-based applications. In this paper, we show how to integrate knowledge reuse concepts into non-instructive conflict detection. We introduce the InformedQX algorithm, which is a reuse-aware variant of QuickXPlain. The results of a related performance analysis with the Linux-2.6.3.33 configuration knowledge base show significant improvements in terms of runtime performance compared to QuickXPlain.

Meta-Interpretive LEarning with Reuse

Inductive Logic Programming (ILP) is a research field at the intersection between machine learning and logic programming, focusing on developing a formal framework for inductively learning relational descriptions in the form of logic programs from examples and background knowledge. As an emerging method of ILP, Meta-Interpretive Learning (MIL) leverages the specialization of a set of higher-order metarules to learn logic programs. In MIL, the input includes a set of examples, background knowledge, and a set of metarules, while the output is a logic program. MIL executes a depth-first traversal search, where its program search space expands polynomially with the number of predicates in the provided background knowledge and exponentially with the number of clauses in the program, sometimes even leading to search collapse. To address this challenge, this study introduces a strategy that employs the concept of reuse, specifically through the integration of auxiliary predicates, to reduce the number of clauses in programs and improve the learning efficiency. This approach focuses on the proactive identification and reuse of common program patterns. To operationalize this strategy, we introduce MILER, a novel method integrating a predicate generator, program learner, and program evaluator. MILER leverages frequent subgraph mining techniques to detect common patterns from a limited dataset of training samples, subsequently embedding these patterns as auxiliary predicates into the background knowledge. In our experiments involving two Visual Question Answering (VQA) tasks and one program synthesis task, we assessed MILER’s approach to utilizing reusable program patterns as auxiliary predicates. The results indicate that, by incorporating these patterns, MILER identifies reusable program patterns, reduces program clauses, and directly decreases the likelihood of timeouts compared to traditional MIL. This leads to improved learning success rates by optimizing computational efforts.

A BIBLIOMETRIC ANALYSIS OF THE CONCEPTS AND METHODS USED IN THE ADAPTIVE REUSE

Adaptive reuse is the transformation of a building because of its inability to meet today's needs, bringing it into society. In the process of change and transformation, the original function of the building, building materials, and social, economic, and socioeconomic situations should be considered. Since the adaptive reuse strategy is a versatile and comprehensive concept, some terms with a similar sense are also used. Additionally, there are various methods of implementing this strategy. These methods can be traditional methods used from the past to the present, or they can be innovative methods created by combining more than one method. In this study, which concepts are used in a similar sense to the concept of adaptive reuse and which innovative methods are applied in this strategy were determined as a research question. The aim of the study is to conduct concept and method research to find an answer to the research question. This study covers the examination of adaptive reuse strategies through academic studies. At this point, the bibliometric analysis method was used. By applying the bibliometric analysis method, the concepts, and innovative methods in the titles of the academic publications examined in the Web of Science database were analysed.

Ethics and aesthetics of adaptive heritage reuse in Europe: an introduction to what happens to territories when heritage is touched

PurposeThe paper introduces ethical and aesthetical implications emerging from participative forms of adaptive heritage reuse. Its aim is to depict the overall framework to contextualize the investigations explored in the Special Issue titled “Ethics and aesthetics of adaptive heritage reuse in Europe.” Therefore, the article confronts with potentialities and contradictions of “open” heritage processes, introducing key critical elements to recode heritage practices and planning in today’s conjuncture of global change.Design/methodology/approachThe paper drawn on a literature review, which combines different bodies of studies: heritage, urban studies, care studies and recent policy documents. A photographic essay, moreover, serves to “augment” the presented argumentations through a visual apparatus resulting from one of Gaia Ginevra Giorgi’s artwork, which develops in the intersection between performative art, participation and territorial reuse.FindingsThe author argues that for adaptive heritage reuse to be really sustainable, ethical and aesthetical heritage codes need to be reassessed and reoriented toward the present socio-ecological priorities, multiplicating the ways cultural heritage is conceived, valued and reused. The paper suggests proceeding along the creative paths of uncertainty, providing the first elements to develop political projects of abundance and enjoyment for current urban settlements.Practical implicationsThe presented argumentations can be used as a baseline by heritage managers and policymakers to experiment with participative processes of adaptive heritage reuse and to identify more environmentally and socially just trajectories of urban development.Originality/valueThe paper expands the concept of adaptive heritage reuse, considering the active participation of both human and non-human agents. Treating heritage in a laic way, namely free from absolute and preordered judgments of value, it deals with uncomfortable heritage materiality and contexts, illuminating the quality of unpleasant or odd forms of beauty.

Data reusability for migration research: a use case from SoDaNet data repository

This study highlights the role of Research Data Repositories (RDRs) in the concept of data reuse by examining a use case on migration research, a domain that requires up-to-date and accurate data for research and policy purposes. The survey from which the data for the use case was derived aimed to investigate the alignment of humanitarian assistance and social protection in Greece during the post-2015 refugee crisis. Through our analysis, we try to formulate a new corpus of variables and information that can create a value chain for research and policy purposes related to migration research, as well as to draw useful conclusions from this use case study in relation to the concept of data reuse. We address several issues related to data reuse, such as its definition, the role of research data repositories and research infrastructures in data reuse, as well as the limitations and advantages of reuse. We also present some specific features of the SoDaNet RDR, which hosts the primary data. We argue that comprehensive documentation of data adds value to the data and, through reuse, this value can be recycled to the RDR and, therefore, to potential new reusers.

Evaluation of the Mechanical Performance of Concrete Reinforced with PET Fibers: A Sustainable Approach

Most of the bottles manufactured with PET polymer (polyethylene terephthalate) are used in beverage packaging and, after use, are turned into garbage, causing environmental problems. The concept of recycling and reuse of these materials for use in civil construction can become an interesting solution for the reduction of urban solid waste that would be destined to the formation of large volumes in sanitary landfills. Seeking to minimize this problem, this work used discarded PET bottles, ground into fibers, to prepare a concrete-based composite. The behavior of concrete composites with the addition of PET fibers in different compositions 7.5 kg/m³, 10 kg/m³ and 12.5 kg/m³ was evaluated. The choice of these concentrations aimed to study the addition of a reasonable amount of PET, characterizing greater reuse of a recycled material, seeking to provide a reinforcement effect in the cementitious matrix. The samples were subjected to mechanical tests of axial compression and diametral compression in a duly calibrated hydraulic press. For the axial compression test, the composite with 10 kg/m³ showed better mechanical performance. Probably at this content, the fibers were better distributed in the concrete for axial compression, resisting more to the fracture point, surpassing the composite of 12.5 kg/m³ by 24% in resistance to compression. For the axial compression test, the composite with 10 kg/m³ showed better mechanical performance, because in this composition there was an ideal amount for the homogenization of the PET fibers in the concrete, achieving a greater reinforcement effect. For the permeability test, the composites prepared with higher percentages of PET showed a lower percentage of permeability (44% lower than the content of 7.5 kg/m³), absorbing less water in this composition, in an axial position. This can be attributed to the fact that the distributed PET fibers act as an impermeable barrier, offering greater resistance to water absorption in the material.

A Comparative Study of ε-constraint, LP-metric, and Weighted Sum Multi-objective Optimization Methods in a Circular Economy

Approximately 74.7 Mt (Million Metric Tonnes) of e-waste is expected to be produced in 2030, and laptop e-waste is one of the major constituents of this. The goal of this paper is to develop and optimize a mixed-integer linear programming (MILP) mathematical model for a laptop manufacturer in India, based on a framework that integrates secondary reuse concept associated with traditional circular economy waste avoidance strategies. The multi-objective solution techniques of ε-constraint, LP-metric, and weighted sum methods are used to optimize the circular economy model. The proposed model aids as a policy tool to decide the optimum number of inspection/collection centers, sales/distribution centers, disassembly centers, refurbishing centers, recycling centers, and their optimum locations and allocations. This study results suggest that reuse, secondary customer centers, refurbishing, and recycling of the laptops is not only economically beneficial to the organization but also environment friendly and helps to create more jobs in the rural economy.

Physical modeling and simulation of electro-mechanical actuator-based TVC systems for reusable launch vehicles

This paper presents the high-fidelity physical modeling of a Thrust Vector Control (TVC) system operated by Electro-Mechanical Actuators (EMAs) for Reusable Launch Vehicles (RLVs). In contrast to simplified, often linear, models, high-fidelity physical models enable a better assessment of the actual system performance and a deeper verification of the on-board software robustness against disturbances, unmodeled dynamics or degradation. This aspect is essential to enable the reusability concept as driven by long-term reliability requirements. Moreover, critical systems like Fault Detection, Isolation and Recovery (FDIR) logic, whose robustness and efficacy are often difficult to prove, can be thoroughly tested without requiring hardware experiments with eventual invasive modifications for fault injections. This work captures the whole dynamics of the EMA and TVC components, including the power drive electronics, the electrical motor, and the mechanical transmission for the EMA, as well as the mechanical properties of the engine nozzle acting as a load. The resulting differential algebraic equation system is modeled in the Modelica acausal object-oriented modeling language. An ad-hoc framework is implemented to guarantee flexibility and modularity, which allows models with different fidelity levels to be easily exchanged to achieve the simulation objectives and needed accuracy level. The impact of the different models on the closed-loop TVC dynamics is analyzed in both the frequency and time domain, and then benchmarked with a realistic RLV mission. The results show that the high-fidelity physical models provide a better understanding of the more complex effects governing the TVC dynamics and can, in turn, effectively improve its requirement definition process.

Pendekatan Highest and Best Use dalam Pelestarian Bangunan Bersejarah

<p>The concept of "Highest and Best Use" (HBU) refers to the optimal utilization of a property that would result in the highest value or benefit. In the context of a heritage building, which conceives historical or cultural significance, adaptive reuse concept becomes particularly relevant. Adaptive reuse involves repurposing a heritage building, such as a former factory building, for a new function that aligns with its historical and architectural characteristics. This approach allows for the preservation of the building's heritage value while also meeting contemporary needs and promoting sustainable development. This study examined the incorporation of HBU features in the three conversions of historical former factory buildings into tourist attractions, namely De Tjolomadoe, Rumah Atsiri, and The Heritage Palace. This study utilized four dimensions of HBU—the legal, physical, financial, and the maximum production dimension—to evaluate the three previous cases that employed adaptive reuse strategies. Results indicated that De Tjolomadoe serves as a noteworthy illustration of the effective implementation of HBU in renovating historical buildings, as evidenced by its achievements.</p>

Circular economy meets building automation

This paper demonstrates the concept of reusing discarded smartphones to connect the end-of-life of e-wastes with the start-of-life of smart buildings. Two control-related and one communication-related case studies have been conducted experimentally to evaluate the applicability. Diverse controlled systems, control tasks, and algorithms have been considered. In addition, the sufficiency of communication with external agents has been quantified. The proof-of-concept experiments indicate the technical feasibility and applicability to typical tasks with satisfactory performance. As the capabilities of smartphones improve over time, higher computing performance and lower communication latency can be expected, which enhances the prospect of the proposed reuse concept.