KCl Concentration Research Articles

Cooperative aggregation of gold nanoparticles on phospholipid vesicles is electrostatically driven.

Gold nanoparticles (AuNP) are known to aggregate on the surface of lipid vesicles, yet the molecular mechanism behind this phenomenom remains unclear. In this work, we have investigated the binding behaviour of AuNPs, synthesized with pulsed laser ablation, to phospholipid vesicles under varying conditions of ionic strength (KCl concentration) and NP to vesicle ratios. Our observations reveal a strong influence of electrolyte concentration on AuNP aggregation mediated by vesicles. Notably, cluster formation is observed even at less than one AuNP per vesicle ratio at low enough ionic strengths. These results evidence a binding mechanism governed by electrostatic attraction with a distinct cooperative behaviour at very low salt concentrations, resulting in a significant increase in nanoparticle clustering. This behaviour is quantitatively analysed through a model that incorporates the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, considering the electrical double layer attraction between dissimilar, non-oppositely charged objects. This study not only provides insight into the fundamental understanding of nanoparticle-vesicle interactions but also suggests potential strategies for controlling nanoparticle assembly in biological and synthetic systems by tuning the ionic strength.

CO2 solubility in aqueous solution of salts: Experimental study and thermodynamic modelling

AbstractThere are many economic obstacles and complex engineering problems associated with CO2 capture and storage in saline aquifers that need to be addressed. Overcoming such challenges requires precise knowledge on the fluid phase equilibria of CO2‐brine systems. Having accurate CO2 solubility data over a wide range of temperature and pressure can greatly assist in resolving these obstacles by improving the performance and accuracy of the thermodynamic modeling and subsequent CCS engineering success.CO2 solubility in pure water and NaCl solutions has been widely studied in the literature, however, there is a lack of data on CO2 solubility at lower temperatures (below 298 K). Furthermore, limited phase equilibria data are available for CO2 solubility in CaCl2, MgCl2, and KCl solutions at elevated temperatures (i.e., T > 323.15 K).In this work, the phase equilibria of CO2 and brine systems are investigated experimentally and theoretically. In this study, solubilities of CO2 in pure water and various concentrations of NaCl (10, 15, 20, and 22 wt%), KCl (10, 15, and 22 wt%), CaCl2 (7.5, 10, 15.7, and 23.4 wt%), and MgCl2 (6.7, 11, 18, and 29 wt%) aqueous solutions are reported. All CO2 solubilities were measures at 323.15, 373.15, and 423.15 K and over various pressure ranges, while solubilities in 10 and 20 wt% NaCl aqueous solutions were also measured over the temperature range of 263 to 298 K and pressures up to the hydrate dissociation pressure of each system. Equation of state modelling using the PC‐SAFT and the Cubic Plus Association equations of state, is performed in the theoretical part of the study to validate the measured solubility data. © 2024 The Author(s). Greenhouse Gases: Science and Technology published by Society of Chemical Industry and John Wiley & Sons Ltd.

The activity of glutathione reductase under impaired liver function and regulation by the Krebs cycle intermediates of the catalytic action of the enzyme isolated by chromatographic methods

The aim of the study was to determine the activity of glutathione reductase (GR, EC 1.6.4.2) in the blood serum of patients with alcoholic hepatitis (AH) and in the blood serum and livers of rats with experimental toxic hepatitis (ETH), as well as to develop a scheme for the purification of the enzyme from the liver of experimental animals using chromatographic methods. In the experiment, we used the blood serum of apparently healthy individuals with normal indices of general and biochemical blood tests (control group of patients), people diagnosed with alcoholic hepatitis (AH), as well as the serum and livers of rats in the control group and rats with ETG. The pathological state in experimental animals was modelled by oral administration of carbon tetrachloride, an organ-specific toxin with hepatotropic effect, as a 33% solution in paraffin oil at the rate of 64 µl of toxin per 100 g of animal weight. The animals were slaughtered on the 4th day after administration of the toxic agent. The control animals were injected with the corresponding aliquot of paraffin oil. The activity of GR was determined spectrophotometrically using a spectrophotometer SF-46 at a wavelength of 340 nm. The total amount of protein was determined by the Lowry method. To study the regulatory properties of the enzyme, it was purified from the livers of the control rats and those with induced toxic hepatitis using the protein separation by ammonium sulphate, as well as gel filtration through Sephadex G-25 and ion-exchange chromatography on DEAE-cellulose. As a result, we obtained 54.5 and 49.1 times purified GR enzyme preparations from the livers of the control rats and animals with ETG. We determined that in the process of ion-exchange chromatography using a column with DEAE-cellulose, the enzyme from the livers of the studied groups of animals was desorbed as a single peak at a KCl concentration of 100 mM. Using the obtained enzyme preparations, we detected differences in the regulation of GR activity under the action of Krebs cycle intermediates. They are obviously associated with conformational modifications of the enzyme molecules under oxidative stress developing during pathology.

Stability and SERS signal strength of laser-generated gold, silver, and bimetallic nanoparticles at different KCl concentrations

Noble metal nanoparticles, specifically gold and silver, are extensively utilized in sensors, catalysts, surface-enhanced Raman scattering (SERS), and optical-electronic components due to their unique localized surface plasmon resonance (LSPR) properties. The production of these nanoparticles involves various methods, but among the environmentally friendly approaches, laser ablation stands out as it eliminates the need for toxic chemicals during purification. However, nanoparticle aggregation poses a challenge in laser ablation, necessitating the addition of extra materials that contaminate the otherwise clean process. In this study, we investigate the effectiveness of a biocompatible material, potassium chloride (KCl), in preventing particle aggregation. Although salt is known to trigger aggregation, we observed that certain concentrations of KCl can slow down this process. Over an eight-week period, we examined the aggregation rate, extinction behavior, and stability of gold, silver, and hybrid nanoparticles generated in different KCl concentrations. Extinction spectra, SEM images, SERS signal strength, and zeta potential were analyzed. Our results demonstrate that laser ablation in water and salt solutions yields nanoparticles with a spherical shape and a negative zeta potential. Importantly, we identified the optimal concentration of potassium chloride salt that maintains solution stability and SERS signal strength. Adsorbed chloride ions on silver nanoparticles were evidenced by low-frequency SERS band near 242 cm−1. A better understanding of the effect of KCl concentration on the properties of noble metal nanoparticles can lead to improved generation protocols and the development of tailored nanoparticle systems with enhanced stability and SERS activity.

Interlayered double-doped N,P-MXene/ZnIn2S4 Schottky junction composite photocatalyst: Efficient removal of ciprofloxacin and methyl orange from complex wastewater

In this study, N and P were used to double doping MXene to obtain N,P-MXene with increased layer spacing and structural defects. Schottky junction N,P-MXene/ZnIn2S4 photocatalysts with tight interfacial contacts were obtained by in situ growth of flower-like ZnIn2S4 nanosheets. The N,P-MXene interlayer spatial structure facilitates the uniform dispersion of ZnIn2S4 and the exposure of the active site. The formation of the Schottky barrier enables the two closely contacted interfaces to form a carrier transport channel, which accelerates the arrival of the charge carriers on the catalyst surface for REDOX reactions. 50 N,P-MXene/ZIS degraded 86.1 % of CIP and 93.9 % of MO. In addition, after several cycling experiments, it was proved that the photocatalyst had good structure and chemical stability. The photocatalytic mechanism was demonstrated by UPS and radical quenching experiments. N,P-MXene/ZnIn2S4 is not only suitable for pH = 7–11, but also for salt solution wastewater containing higher concentrations of NaCl or KCl. Therefore, the construction of heteroatom doped N,P-MXene/ZnIn2S4 Schottky junction photocatalysts with excellent photocatalytic degradation performance is of profound significance for the treatment of pollutants.

Flanking Effect on the Structure and Stability of Human Telomeric G-Quadruplex in Varying Salt Concentrations.

The stability of the human telomere G-quadruplex (G4) is directly linked to cancer disease. The human telomere is mostly associated with the flanking nucleobases, which can affect the stability of G4. Hence, in this study, the effect of the flanking nucleobases in the context of their chemical nature, number, and position on the structure and stability of G4 has been investigated in varying concentrations of KCl mimicking the normal and cancer KCl microenvironments. The addition of flanking nucleobases does not alter the G4 topology. However, the presence of merely a single flanking nucleobase destabilizes the telomeric G4. This destabilizing effect is more prominent for thymine than adenine flanking nucleobase, probably due to the formation of the intermolecular G4 topology by thymine. Interestingly, the change in the stability of the telomeric G4 in the presence of thymine flanking nucleobase is sensitive to the concentration of KCl relevant to the normal and cancerous microenvironments, in contrast to adenine. Flanking nucleobases have a greater impact at the 5' end compared to the 3' end, particularly noticeable in KCl concentrations resembling the normal microenvironment rather than the cancerous one. These findings indicate that the effect of the flanking nucleobases on telomeric G4 is different in the KCl salt relevant to normal and cancerous microenvironments. This study may be helpful in attaining molecular-level insight into the role of G4 in telomeric length regulation under normal and cancerous KCl salt conditions.

Biomimetic kartogenin containing κ-carrageenan hydrogel for nucleus pulposus regeneration

Intervertebral disc degeneration is a clinical disease that reduces the quality of patient's life. The degeneration usually initiates in the nucleus pulposus (NP), hence the use of hydrogels represents a promising therapeutic approach. However, the viscoelastic nature of hydrogel and its ability to provide biomimetic architecture and biochemical cues influence the regeneration capability. This study focused on tuning the physical nature of a glycosaminoglycan hydrogel (κ-carrageenan) as well as the release kinetics of a chondrogenic factor (kartogenin - KGN) through physical cross-linking. For this, κ-carrageenan was cross linked with 2.5 % and 5 % potassium chloride (KCl) for 15 and 30 min and loaded with KGN molecule at 50 μM and 100 μM. The tight network structure with low water retention and degradation property was seen in hydrogel cross-linked with increased KCl concentration and time. However, optimal degradation along with NP mimicking viscoelastic nature was exhibited by 5 wt% KCl treated hydrogel (H3 hydrogel). All hydrogel groups exhibited burst KGN release at 24 h followed by a sustained release for 5 days. However, hydrogel cross-linked with 5 wt% KCl enhanced chondrogenic differentiation, mainly at lower KGN dose. In summary, this study shows the potential application of biomimetic KGN laden carrageenan hydrogel in NP regeneration.

Advanced ion-selective wood membranes: Leveraging aligned cellulose nanofibers for enhanced osmotic energy conversion

Nanofluidic reverse electrodialysis (RED) is widely recognized as an exceptionally effective method for harvesting osmotic energy. Nevertheless, its progress has been impeded by the high costs and intricate fabrication processes associated with the required ion exchange membranes. The ion-selective wood membranes (ISWM) are derived directly from natural wood through a meticulously designed two-step chemical modification and densification process. The obtained ISWM with a highly charged surface effectively preserves the alignment of nanochannels from the cellulose fibers sourced in natural wood. Moreover, the laminated structure consisting of oriented nanofibers enhances ion conductivity by a factor of 4 compared to natural wood birch under low KCl concentrations. The charged and aligned nanochannels serve as nanofluidic conduits, facilitating selective ion transport. This, in turn, engenders efficient charge separation and the generation of an electrochemical potential difference. In energy harvesting systems such as ISWM-RED, the synergistic interplay between the electrochemical potential difference and ionic flux manifests in a remarkable output power density, reaching up to 658 mW m−2 to a salinity gradient of KCl at a magnitude of 50-fold. ISWM is an outstanding nanofluidic material that provides a cost-effective and easy-to-prepare solution for producing natural nanofluidic materials. Our investigation delineates a promising trajectory for developing high-performance nanofluidic RED devices tailored for efficient osmotic energy harvesting from renewable and abundant natural resources.

Optimizing extenders for short-term storage of Sterlet (Acipenser ruthenus) sperm

Considering endangered fish, storage of sterlet (Acipenser ruthenus) gamete is crucial, and investigating the most suitable extender for short-term storage of sperm is necessary. Therefore, the present study aimed to optimize suitable extenders for short-term storage of sterlet spermatozoa and determine the effects of storage periods and different extenders on spermatozoa motility parameters. The sperm of five mature males with good spermatozoa motility (∼80 %) were diluted with 20 different extenders having various Na+ and K+ concentrations and osmolality. Spermatozoa motility performances were assessed using a CASA system within 144 h storage at 0–2 °C. Undiluted sperm was used as a control. Seminal plasma Na+, K+, Ca2+ and Cl- concentrations were 17.56±10.12, 2.48±1.14, 0.11±0.06, and 6.20±3.42 mmol/L with osmolality of 35.60±20.70 mOsm/kg. A two-way ANOVA showed significant effects of storage time, extender, and their interaction on spermatozoa motility, curvilinear velocity (VCL), and straight-line velocity (VSL) (p<0.001). The model was decomposed into one-way ANOVA to study the effects of storage time and extenders. Excluding 1 h post-storage, spermatozoa motility, VCL, and VSL were lower in the non-diluted sperm than those diluted with E18-E20 at 24 h post-storage (p<0.05). The osmolality of these extenders was respectively 46, 55, and 62 mOsmol/kg and contained 1 mM KCl. Increasing the extender KCl concentrations to >3 mM resulted in lower spermatozoa motility performance. When the effects of storage time were studied, spermatozoa motility, VCL, and VSL in non-diluted sperm and those diluted with E18-E20 were decreased at 24–48 h and 72–96 h post-storage, respectively. This study shows that extenders with higher osmolality (39–62 mOsm/kg) and lower K+ (1 mmol/L) are the most suitable for storing sterlet sperm for a short period.

Holey Sheets Enhance the Packing and Osmotic Energy Harvesting of Graphene Oxide Membranes.

Layered membranes assembled from two-dimensional (2D) building blocks such as graphene oxide (GO) are of significant interest in desalination and osmotic power generation because of their ability to selectively transport ions through interconnected 2D nanochannels between stacked layers. However, architectural defects in the final assembled membranes (e.g., wrinkles, voids, and folded layers), which are hard to avoid due to mechanical compliant issues of the sheets during the membrane assembly, disrupt the ionic channel pathways and degrade the stacking geometry of the sheets. This leads to degraded ionic transport performance and the overall structural integrity. In this study, we demonstrate that introducing in-plane nanopores on GO sheets is an effective way to suppress the formation of such architectural imperfections, leading to a more homogeneous membrane. Stacking of porous GO sheets becomes significantly more compact, as the presence of nanopores makes the sheets mechanically softer and more compliant. The resulting membranes exhibit ideal lamellar microstructures with well-aligned and uniform nanochannel pathways. The well-defined nanochannels afford excellent ionic conductivity with an effective transport pathway, resulting in fast, selective ion transport. When applied as a nanofluidic membrane in an osmotic power generation system, the holey GO membrane exhibits higher osmotic power density (13.15 W m-2) and conversion efficiency (46.6%) than the pristine GO membrane under a KCl concentration gradient of 1000-fold.

Effect of Salt Content on Solubilization of Hydrophobic Polymer by Wormlike Micelles of Ionic Surfactant

The effect of concentration of inorganic salt KCl on solubilization of hydrophobic polymer poly(4-vinylpyridine) (P4VP) in aqueous solutions of ionic surfactant potassium oleate was experimentally investigated. As was shown by rheology, in the range of concentrations from 1 to 5 wt.% of salt the polymer-free solutions of surfactant mainly contain linear wormlike micelles (WLMs). The formation of branched WLMs was observed in the solutions containing 5-9 wt.% of KCl. In the presence of higher salt content the phase separation occurred, indicating the formation of a highly branched saturated network of WLMs. Enhanced screening of the charged groups of potassium oleate by oppositely charged ions of KCl caused elongation and branching of micelles that reflected in zero-shear viscosity of the solutions passing through the maximum. In the phase diagram, the saturation concentration with P4VP of both linear and branched WLMs decreased with increasing salt content. In the case of linear WLMs, this could be explained by the constant number of embedded polymer chains per 1 WLM, while simultaneously decreasing number of WLMs in the system. As for the branched WLMs, it was caused by shortening of the linear parts of micelles due to the formation of branching points. For this reason, almost no P4VP was dissolved in the solution containing the highly branched saturated network.

Study of ISFET for KCl sensing

This work presents the fabrication and electrical characterization of the Ion Sensitive Field Effect Transistor (ISFET) exposed to potassium chloride (KCl) solutions. The focus of the study is to compare two measurements methods and verify the effects of these methods in the device threshold voltage (VTH) sensitivity to the different KCl concentrations. First, a reference electrode (a platinum needle) is placed in the sample solution over the gate area of the device, demonstrating that the threshold voltage decreases with the increase of the KCl concentration. The method shows a sensitivity of 10.44 mV/mM for the low KCl concentration range (0 to 10 mM) and 0.5 mV/mM for the higher KCl concentration range (10 to 100 mM). The second method involves inserting a second platinum electrode into the solution on the field oxide. This method proposes the KCl electrolysis to increase the selectivity for potassium ions. The result allows the next steps for potassium sensing biosensor application with selective membranes.

Use of FRET-Sensor 'Mermaid' to Detect Subtle Changes in Membrane Potential of Primary Mouse PASMCs.

Subtle changes in the membrane potential of pulmonary arterial smooth muscle cells (PASMCs) are pivotal for controlling pulmonary vascular tone, e.g., for initiating Hypoxic Pulmonary Vasoconstriction, a vital mechanism of the pulmonary circulation. In our study, we evaluated the ability of the fluorescence resonance energy transfer (FRET)-based voltage-sensor Mermaid to detect such subtle changes in membrane potential. Mouse PASMCs were isolated and transduced with Mermaid-encoding lentiviral vectors before the acceptor/donor emission ratio was assessed via live cell FRET-imaging. Mermaid's sensitivity was tested by applying specific potassium chloride (KCl) concentrations. These KCl concentrations were previously validated by patch clamp recordings to induce depolarization with predefined amplitudes that physiologically occur in PASMCs. Mermaid's emission ratio dose-dependently increased upon depolarization with KCl. However, Mermaid formed unspecific intracellular aggregates, which limited the usefulness of this voltage sensor. When analyzing the membrane rim only to circumvent these unspecific signals, Mermaid was not suitable to resolve subtle changes in the membrane potential of ≤10 mV. In summary, we found Mermaid to be a suitable alternative for reliably detecting qualitative membrane voltage changes of more than 10 mV in primary mouse PASMCs. However, one should be aware of the limitations associated with this voltage sensor.

Pattern formation by the drying of saline droplets on pillars

The application of saline solutions for surface coating is pertinent across multiple biomedical fields, various technological sectors, and industries, including agriculture. The drying of salt solution droplets is key to understanding and controlling morphological structures on surfaces. In this paper, we report the study of pattern formation from the evaporation of saline drops (NaCl, CsCl, and KCl) placed on pillars. Our findings indicate that regardless of saline concentration and type, the drying process can be categorized into three modes: stable, metastable, and unstable. In both the stable and metastable modes, the droplet fixes to the pillar during the drying process and ensuing pattern formation; however, the crucial distinction lies in the metastable mode, where the droplet additionally undergoes mass loss through fluid drainage from the walls of the pillars. Conversely, in the unstable drying mode, the droplet undergoes rapid collapse, leading to a substantial loss of mass. The distinct drying modes dictate the resulting patterns on the pillars. We employ measurements of configurational entropy and fractal dimension as quantitative metrics to assess the complexity, reproducibility, and similarity of patterns. The texture analysis reveals that, at low concentrations of both CsCl and KCl, significant differences emerge among the patterns produced by the different drying modes, especially highlighting differences in patterns of the stable drying mode. Finally, we analyze fertilizer deposition patterns to prove that all three drying modes can occur in complex fluids.

Hyper β-glucosidase producer Beauveria bassiana SAN01—optimization of fermentation conditions and evaluation of saccharification potential

AbstractThe hyper-production of β-glucosidase by a local strain of Beauveria bassiana under submerged conditions is reported in this study. The initial screening of seven agricultural residues showed that the haulm of Bambara—an underutilized African legume—supported the highest β-glucosidase production; hence, statistical optimization of enzyme production was done using this biomass as the sole carbon source. Plackett–Burman design identified the concentrations of Bambara haulm, KCl, and NaCl as well as agitation speed and incubation time as the most significant factors affecting enzyme production. Subsequently, the central composite design predicted the optimal conditions (Bambara 57 g/L, KCl 302 mg/L, NaCl 154 mg/L, agitation speed 150 rpm, and incubation 223 h) for B. bassiana β-glucosidase production, which were further validated. The generated quadratic model was deemed significant judging from its F-value (201.63), adequate precision ratio (45.74), as well as the R2 (0.9988), adjusted R2 (0.9938), and predicted R2 (0.9195) values. The optimization resulted in a ~5.36-fold increase in enzyme levels from the unoptimized production of ~133 to 711 U/mL. The enzyme was also demonstrated to efficiently hydrolyze cellobiose, converting more than 90% of the substrate to glucose. These results further establish the resourcefulness of the B. bassiana strain for the production of β-glucosidase enzyme, having immense potential, especially in the food and energy industries.

Fabrication of k-Carrageenan/Alginate/Carboxymethyl Cellulose basedScaffolds via 3D Printing for Potential Biomedical Applications.

Three-dimensional (3D) printing technology was able to generate great attention because of its unique methodology and for its major potential to manufacture detailed and customizable scaffolds in terms of size, shape and pore structure in fields like medicine, pharmaceutics and food. This study aims to fabricate an ink entirely composed of natural polymers, alginate, k-carrageenan and carboxymethyl cellulose (AkCMC). Extrusion-based 3D printing was used to obtain scaffolds based on a crosslinked interpenetrating polymer network from the alginate, k-carrageenan, carboxymethyl cellulose and glutaraldehide formulation using CaCl2, KCl and glutaraldehyde in various concentrations of acetic acid. The stabile bonding of the crosslinked scaffolds was assessed using infrared spectroscopy (FT-IR) as well as swelling, degradation and mechanical investigations. Moreover, morphology analysis (µCT and SEM) confirmed the 3D printed samples' porous structure. In the AkCMC-GA objects crosslinked with the biggest acetic acid concentration, the values of pores and walls are the highest, at 3.9 × 10-2 µm-1. Additionally, this research proves the encapsulation of vitamin B1 via FT-IR and UV-Vis spectroscopy. The highest encapsulation efficiency of vitamin B1 was registered for the AkCMC-GA samples crosslinked with the maximum acetic acid concentration. The kinetic release of the vitamin was evaluated by UV-Vis spectroscopy. Based on the results of these experiments, 3D printed constructs using AkCMC-GA ink could be used for soft tissue engineering applications and also for vitamin B1 encapsulation.

Preparation of α-calcium sulfate hemihydrate with high mechanical strength from natural fibrous gypsum in KCl-mediated glycerol-water solution

Natural fibrous gypsum is a kind of high-quality gypsum resources, whose high-value added utilization pathway is to be transformed to α-calcium sulfate hemihydrate (α-HH), a cementitious material that can react with water to form pastes with mechanical strength. In this work, α-HH was prepared from natural fibrous gypsum in KCl mediated glycerol-water solution under mild condition. KCl played a simultaneous function on regulating the phase-transition kinetics, morphology and comprehensive strength of α-HH. Addition of low concentration of KCl prominently retarded the nucleation and growth rate of α-HH and decreased its aspect ratio due to the formation of syngenite on the side faces. While further increase of KCl concentration accelerated the nucleation and growth rate and decreased the crystal sizes. In the presence of 0.04 M KCl, the prepared α-HH presented a hexagonal prism shape with a length / width of 257.69–579.71 μm / 13.13–36.61 μm, and its dry comprehensive strength had reached 38.1 MPa that was comparable to those prepared in commercial, chloride and nitrate system. Altogether, the foreign ion-free glycerol-water solution contributed to transforming natural fibrous gypsum to α-HH with high purity and high mechanical strength.

LOW FREQUENCY DIELECTRIC PROPERTIES OF AGRICULTURE SOIL CONTAMINATED BY POTASH CHEMICAL FERTILIZERS

Present paper investigates the impact of potash (KCl) contamination on the low-frequency (100 Hz - 1 MHz) dielectric properties of agricultural soil from the western Dhule district, India. Soil samples were spiked with varied KCl concentrations (0, 5, 10, and 20 mg) and analyzed using an LCR meter to measure dielectric constant, impedance, dielectric loss, and admittance. Results demonstrate a proportional increase in dielectric constant with increasing KCl concentration, indicating enhanced polarization within the soil matrix. Conversely, impedance and admittance displayed opposite trends, with impedance decreasing and admittance increasing as KCl concentration rose. Dielectric loss also exhibited a positive correlation with KCl content. This comprehensive investigation sheds light on the dynamic interplay between soil composition and dielectric properties under varying potash concentrations, contributing valuable insights to agricultural and environmental sciences.

Implications of high homocysteine levels in migraine pain: An experimental study of the excitability of peripheral meningeal afferents in rats with hyperhomocysteinemia.

Investigation of chronic homocysteine action on the excitability and N-methyl-D-aspartate (NMDA) sensitivity of the peripheral trigeminovascular system of rats. Migraine is a neurological disease that affects 15%-20% of the general population. Epidemiological observations show that an increase of the sulfur-containing amino acid homocysteine in plasma-called hyperhomocysteinemia-is associated with a high risk of migraine, especially migraine with aura. In animal studies, rats with hyperhomocysteinemia demonstrated mechanical allodynia, photophobia, and anxiety, and higher sensitivity to cortical spreading depression. In addition, rats with hyperhomocysteinemia were more sensitive in a model of chronic migraine induced by nitroglycerin which indicated the involvement of peripheral nociceptive mechanisms. The present work aimed to analyze the excitability of meningeal afferents and neurons isolated from the trigeminal ganglion of rats with prenatal hyperhomocysteinemia. Experiments were performed on male rats born from females fed with a methionine-rich diet before and during pregnancy. The activity of meningeal afferents was recorded extracellularly in hemiskull preparations exvivo and action potentials were characterized using cluster analysis. The excitability of trigeminal ganglion neurons was assessed using whole-cell patch clamp recording techniques and calcium imaging studies. Meningeal mast cells were stained using toluidine blue. The baseline extracellular recorded electrical activity of the trigeminal nerve was higher in the hyperhomocysteinemia group with larger amplitude action potentials. Lower concentrations of KCl caused an increase in the frequency of action potentials of trigeminal afferents recorded in rat hemiskull exvivo preparations. In trigeminal ganglion neurons of rats with hyperhomocysteinemia, the current required to elicit at least one action potential (rheobase) was lower, and more action potentials were induced in response to stimulus of 2 × rheobase. In controls, short-term application of homocysteine and its derivatives increased the frequency of action potentials of the trigeminal nerve and induced Ca2+ transients in neurons, which are associated with the activation of NMDA receptors. At the same time, in rats with hyperhomocysteinemia, we did not observe an increased response of the trigeminal nerve to NMDA. Similarly, the parameters of Ca2+ transients induced by NMDA, homocysteine, and its derivatives were not changed in rats with hyperhomocysteinemia. Acute incubation of the meninges in homocysteine and homocysteinic acid did not change the state of the mast cells, whereas in the model of hyperhomocysteinemia, an increased degranulation of mast cells in the meninges was observed. Our results demonstrated higher excitability of the trigeminal system of rats with hyperhomocysteinemia. Together with our previous finding about the lower threshold of generation of cortical spreading depression in rats with hyperhomocysteinemia, the present data provide evidence of homocysteine as a factor that increases the sensitivity of the peripheral migraine mechanisms, and the control of homocysteine level may be an important strategy for reducing the risk and/or severity of migraine headache attacks.

Experimental solubility of FeCO3 in aqueous 3–20 wt% KCl at 25–80 °C

FeCO3 is a mineral, present in both industrial and natural systems. While the solubility of FeCO3 is determining for CO2 storage, and driving for corrosion, it is not well understood. For the development of rigorous modelling, there is a lack of adequate experimental data under relevant conditions to model carbonated systems containing iron.In this work, the solid-liquid equilibrium (SLE) of the ternary system FeCO3-KCl-H2O was measured at atmospheric pressure at temperatures from 25 to 80 °C. The FeCO3 solubility was studied in aqueous KCl solutions from 3 to 20 wt%. 73 new solubility data points for the systems FeCO3–KCl–H2O are presented together with 73 oxidation data points. Results showed that less than 5% of FeCO3 is oxidized in the electrolyte system. The equilibrium concentration of FeCO3 was obtained after 5–10 days with the fastest equilibrium kinetics obtained at the highest temperature, 80 °C. Temperature had a minor impact on the FeCO3 solubility in aqueous KCl solutions. However, the FeCO3 solubility seemed to slightly decrease with temperature. The solubility data was fitted to a first-order rate equation with molality as driving, to obtain kinetic insights. The dissolution rate decreases as a function of KCl concentrations. In some cases, it was 75 % lower than in NaCl. A rate constant of approximately 0.2 1/day was obtained for most experiments. The FeCO3 solubility and kinetic data obtained in this work will allow for a deeper understanding and better prediction of CO2 corrosion and mineralization, suitable for CO2 storage.