Organic Solvent Content Research Articles

Organic Solvent Nanofiltration Membrane with In Situ Constructed Covalent Organic Frameworks as Separation Layer

Organic solvent nanofiltration (OSN) technology is advantageous for separating mixtures of organic solutions owing to its low energy consumption and environmental friendliness. Covalent organic frameworks (COFs) are good candidates for enhancing the efficiency of solvent transport and ensuring precise molecular sieving of OSN membranes. In this study, p-phenylenediamine (Pa) and 1,3,5-trimethoxybenzene (Tp) are used to construct, in situ, a TpPa COF skin layer via interfacial polymerization (IP) on a polyimide substrate surface. After subsequent crosslinking and activation steps, a kind of TpPa/polyimide (PI) OSN membrane is obtained. Under optimized fabrications, this OSN membrane exhibits an ethanol permeance of 58.0 LMH/MPa, a fast green FCF (FGF) rejection of 96.2%, as well as a pure n-hexane permeance of 102.0 LMH/MPa. Furthermore, the TpPa/PI OSN membrane exhibits good solvent resistance, which makes it suitable for the separation, purification, and concentration of organic solvents.

Paclitaxel loaded Capmul MCM and tristearin based nanostructured lipid carriers (NLCs) for glioblastoma treatment: screening of formulation components by quality by design (QbD) approach.

Paclitaxel (PTX), a naturally occurring diterpenoid isolated from Taxus brevifolia, is a first-line drug for the treatment of glioblastoma; however, it suffers from the disadvantages of poor water solubility and nonspecific biodistribution, which cause serious side effects in the human body. The marketed formulation suffers from serious side effects, such as allergic reactions, neutropenia, and neuropathy, which require safe and effective formulations of PTX. In the present study, PTX was entrapped in a solid-liquid lipid mixture with the aid of a surfactant using a modified solvent evaporation technique. Higher entrapment of the impressive stability of the formulation was achieved by employing quality design-based strategies. Optimized levels by employing a numerical optimization technique for each factor, that is, surfactant concentration (X1), lipid concentration (X2), and amount of organic solvent (X3) were 0.3%, 0.76% & 8.3 ml respectively. The resultant formulation exhibited a particle size of 121.44 nm, entrapment efficiency of 94.27%, and zeta potential of -20.21 mV with unimodal size distribution. A reduction in the % crystalline index from 48 to 3.4% ensured the amorphous form of the entrapped drug inside the formulation, which precludes the fear of leakage and instability of the formulation. Cell line studies conducted on U87MG Cell lines also suggested that the NLC of paclitaxel are more effective than those of pure PTX. In summary, PTXNLC seem to be a superior alternative carrier system for the formulation industry to obtain higher entrapment with excellent stability.

Enhanced Organics Removal Using 3D/GAC/O3 for N-Containing Organic Pharmaceutical Wastewater: Accounting for Improved Biodegradability and Optimization of Operating Parameters by Response Surface Methodology

Pharmaceutical industry effluents often contain high concentrations of refractory organic solvents, chemical oxygen demand (COD), and total dissolved solids (TDSs). These wastewaters, including N-containing organic solvents known for their persistence and toxicity, pose significant environmental challenges. The study evaluated the efficacy of 3D/Granular Activated Carbon (GAC)/O3 treatment compared to linear process additions when treating real pharmaceutical wastewater, and revealed a 2.73-fold enhancement in COD mineralization. The process primarily involves the direct oxidation of monoprotic organic acids found in real pharmaceutical effluents, such as acetic and formic acid, crucially influencing mineralization rates. Optimal conditions determined via the response surface methodology were 125 g/L GAC, 30 mA/cm2, and 75 mg/L O3, achieving high total organic carbon (TOC) and COD removal efficiencies of 87.19 ± 0.19% and 89.67 ± 0.32%, respectively (R2 > 0.9), during verification runs. Current density emerged as the key parameter for organic abatement, aligning with the emphasis on direct oxidation at the anode surface. This integrated approach enhances biodegradability (BOD5/COD) and reduces acute toxicity associated with persistent N-containing solvents, demonstrating promising applications in pharmaceutical wastewater treatment.

Accelerated removal of solvent residuals from PLGA microparticles by alcohol vapor-assisted fluidized bed drying

The removal of residual solvents from biodegradable poly(D,L-lactide-co-glycolide) (PLGA) microparticles by fluidized bed drying was investigated. Microparticles were prepared by the O/W solvent extraction/evaporation method and the influence of various process and formulation parameters on the secondary drying was studied. PLGA microparticles and films were characterized for residual organic solvent and water content, recrystallisation, surface morphology, drug loading and in-vitro release of the drugs dexamethasone and risperidone. While alcohol-free fluidized bed drying decreased the residual dichloromethane content only from about 7 % (w/w) to 6.4 % (w/w) (18 °C) or 3.2 % (w/w) (35 °C) within 24 h, 140 mg/L methanol vapor in purge gas facilitated almost complete removal of dichloromethane or ethyl acetate from microparticles (0–0.11 % (w/w) after 6 h). By controlling the alcohol concentration and temperature of the purge gas, the alcohol absorption and complete removal was controlled. Risperidone increased the methanol absorption enhancing the plasticization. A high initial residual water content was identified to promote aggregation and was eliminated by starting fluidized bed drying without alcohol. Alcohol vapor-assisted fluidized bed drying accelerated microparticle manufacturing without affecting the redispersibility, the drug loading and the in-vitro release of risperidone and dexamethasone.

Sulfur Fluoride Exchange Enabled Polysufate Adsorbents: Flexible Group Embedded in Polymer Backbone Regulation Strategy for Organic Solvent Removal from Water.

Removal of organic solvents (such as chloroform, toluene, etc.) in trace amounts using adsorbents from water is a challenge due to their low removal efficiencies and poor selectivities. Herein, four polysulfates (P1-P4) with different flexible group embedded backbones were synthesized via a sulfur fluoride exchange (SuFEx) reaction, and their swelling behaviors in organic solvents were investigated. P1 with a flexible ethyl group on its backbone can selectively swell in aprotic organic solvents with medium and high polarities about 30-fold its original weight, which is much higher than that of P4 with rigid benzene on its backbone. Moreover, molecular dynamic (MD) simulation results showed that the swelling mechanism could be put down to the electrostatic and van der Waals forces between the polysulfates and organic solvents. Surprisingly, the polysulfates can be used to remove chloroform and toluene from water with removal efficiencies of up to 99.26 and 99.42%, respectively. Furthermore, the polysulfates also exhibited high selectivities and anti-interference performances toward chloroform in the presence of other pollutants and different acid/base environments. Our work provides a strategy to construct adsorbents with high efficiencies for removal of low concentrations of organic solvents from water.

Raman Microscopic Investigation of Organic Solvent Concentration Profiles in Proton Exchange Membranes and Their Permeability

Direct alcohol fuel cells (DAFCs) suffer from severe problems related to the employed polymer electrolyte membranes, such as fuel crossover, resulting in low faradaic efficiency and performance of the fuel cell.1,2,3 We introduce a 3D-printed diffusion cell setup, which is capable of determining the interaction of membranes and organic solvents via confocal Raman microscopy.4 Thus, the suitability of proton exchange membranes (PEMs) for usage in DAFCs can be evaluated. In this setup, the membrane is clamped between two flow channels, similar to the flow field plates of a fuel cell. The donor channel is filled with an organic solvent-water mixture, and the receptor channel is filled with water. Depth scans through the membrane and the two flow channels provide concentration profiles of the organic solvent within the membrane, which are used to calculate membrane properties such as permeability and sorption coefficient (see Fig. 1).In this study, the membrane-solvent interactions between standard unreinforced and composite PEMs and various organic solvent solutions, such as 2-propanol, acetone, and ethanol, are investigated. All membranes analyzed show a preference for organic solvent absorption from 1 M solutions, with sorption coefficients ranging from 2.5 to 3.0. In addition to the absorption, the organic solvents permeate through the membrane. The corresponding permeabilities range from 10-5 to 10-4 cm² s-1. However, the permeabilities of the membranes for different solvents do not scale with their sorption coefficients, in contrast to the membrane swelling.This diffusion cell setup is an accessible and fast pre-screening method, which can enhance the development and evaluation of new ion exchange membranes for use in DAFCs and related applications.

The series of L-lysine-derived gelators-modified multifunctional chromatography stationary phase for separation of chiral and achiral compounds

In this study, using chiral L-lysine as the molecular skeleton, three kinds of L-lysine-derived gelators (GBLB, GBLF and GFLF) were synthesized and then bonded to the surface of silica matrix (5 μm) by amide condensation to prepare a series of multifunctional chromatography stationary phases (GBLB-SiO2, GBLF-SiO2, and GFLF-SiO2) were prepared. The L-lysine-derived gelators not only possess chiral recognition ability, but also can spontaneously form oriented and ordered network structures in liquid medium through the interaction of non-covalent bonding forces such as hydrogen bonding, π-π stacking, and van der Waals forces. The comprehensive effect of multiple weak interaction sites enhances the molecular recognition ability and further improves the separation diversity of different types of compounds on stationary phases. The separation and evaluation of chiral compounds showed that benzoin, 1-phenyl-ethanol, 1-phenyl-propanol and 6-hydroxyflavanone could be separated in normal phase mode (NPLC). The separation of different types of non-chiral compounds, such as sulfonamides, nucleosides, nucleobases, polycyclic aromatic hydrocarbons (PAHs), anilines, and aromatic acids, were achieved in hydrophilic interaction/reversed-phase/ion-exchange mode (HILIC/RPLC/IEC), and the separation of polarized compounds could be performed under the condition of ultrapure water as the mobile phase, which has the typical retention characteristics of per aqueous liquid chromatography (PALC). The effects of organic solvent content, temperature, pH value, and buffer salt concentration on the retention and separation performance of the column were investigated. Comparison of the three prepared columns showed that the separation performance (such as aromatic selectivity) could be improved by increasing the types of functional groups on the surface of the stationary phase and the number of aromatic groups. In a word, the prepared stationary phase have multiple retention properties, can simultaneously separate chiral compounds and various types of achiral compounds. This work provides an idea for developing multifunctional liquid chromatography stationary phase materials, and further expands the application of gelators in separation science.

Push-Pull Fluorescent Dyes with Trifluoroacetyl Acceptor for High-Fidelity Sensing of Polarity and Heterogeneity of Lipid Droplets.

Imaging and sensing of lipid droplets (LDs) attracted significant attention due to growing evidence for their important role in cell life. Solvatochromic dyes are promising tools to probe LDs' local polarity, but this analysis is biased by their non-negligible emission from intracellular membranes and capacity to emit from both the apolar core and polar interface of LDs. Here, we developed two push-pull solvatochromic dyes based on naphthalene and fluorene cores bearing an exceptionally strong electron acceptor, the trifluoroacetyl group. The latter was found to boost the optical properties of the dyes by shifting their absorption and emission to red and increasing their extinction coefficient, photostability, and sensitivity to solvent polarity (solvatochromism). In contrast to classical solvatochromic dyes, such as parent aldehydes and reference Nile Red, the new dyes exhibited strong fluorescence quenching by millimolar water concentrations in organic solvents. In live cells, the trifluoroacetyl dyes exhibited high specificity to LDs, whereas the parent aldehydes and Nile Red showed a detectable backgrounds from intracellular membranes. Experiments in model lipid membranes and nanoemulsion droplets confirmed the high selectivity of new probes to LDs in contrast to classical solvatochromic dyes. Moreover, the new probes were found to be selective to the LDs oil core, where they can sense lipid unsaturation and chain length. Their ratiometric imaging in cells revealed strong heterogeneity in polarity within LDs, which covered the range of polarities of unsaturated triglyceride oils, whereas Nile Red failed to properly estimate the local polarity of LDs. Finally, the probes revealed that LDs core polarity can be altered by fatty acid diets, which correlates with their chain length and unsaturation.

Investigation on itraconazole solubility in aqueous solutions based on models, solvent effect, thermodynamic analysis and quantum chemical calculations

The mole-fraction solubility of itraconazole in four aqueous blends of ethanol/isopropanol/DMSO/methanol within the temperature range of 283.15 to 323.15 K was experimentally obtained using the isothermal shake-flask method. Under the identical temperature and ethanol/isopropanol/DMSO/methanol composition, itraconazole solubility in DMSO+water is much higher than that in ethanol/isopropanol/methanol + water. At the same temperature, the solubility increases monotonically with organic solvent concentration. X-ray power diffraction analysis demonstrated that over the course of the investigations, there was no crystal transition or solvate formation. The modified van’t Hoff-Jouyban-Acree and Jouyban-Acree models adequately related the solubility to solvent composition and temperature, with relative average deviations (RADs) not exceeding 7.65 %. Furthermore, the extended Hildebrand solubility approach was utilized to quantitatively characterize the solubility behavior at 298.15 K for the mixtures of ethanol/isopropanol/DMSO/methanol plus water. In both instances, the RADs were maintained below 4.12 %. The solubility parameter and dipolarity-polarizability of solutions have a major impact on the solubility fluctuation, as indicated by the analysis of the linear solvation energy relationship. The preferential solvation of itraconazole at 298.15 K was examined using the efficient approach of inverse Kirkwood-Buff integrals. The preferred solvation parameters showed positive values in blends within rich and moderate ethanol/isopropanol/DMSO/methanol composition regions. This suggests that the organic solvents preferentially solvated itraconazole. When itraconazole dissolved in the blends, thermodynamic analysis of the entropy-enthalpy compensation and dissolution parameters revealed both an endothermic and an enthalpy-driven mechanism. Furthermore, the microscopic electrostatic characteristics of basicity and acidity were effectively demonstrated by means of the electrostatic potential of molecular surface. The −C=O and −N=groups of the itraconazole molecule, which link the five-membered ring, are the primary targets of the electrophilic attack. An independent gradient model based on Hirshfeld partition analysis was used to demonstrate the weak interactions between itraconazole and solvents.

Selection of organic solvents as reaction media for laccase from Trametes versicolor

The ability of laccases to work effectively in properly selected aqueous-organic solutions significantly expands the scope of their application, making them commercially attractive and more competitive. However, it must be considered that molecules of organic solvent are very aggressive towards enzymes and destroy weak non-covalent interactions that maintain the spatial structure of the protein. In this work, we quantitatively described the influence of the nature of water-miscible organic solvents and their concentration on the activity and stability of Trametes versicolor laccase during the oxidation of ABTS (2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid)) through the maximum rates and the Michaelis constants KM. The obtained kinetic parameters make it possible to compare the effect of various organic solvents on laccase and select the most optimal one, which minimizes the decrease in enzyme activity, maintains its stability and allows repeated use. Among the solvents studied, polyhydroxy compounds have the least negative effect on laccase activity; however, in all cases, a high concentration of organic solvent (≥30% (v/v)) leads to suppression of enzymatic activity. It has been shown that the longer the alkyl chain (hydrophobic fragment of the structure), the stronger the negative effect of alcohols on enzymes. The most toxic solvent for Trametes versicolor laccase is isopropanol. In addition, numerous examples of various uses of Trametes versicolor in aquatic-organic environments are discussed here.

Role of heads and tails on tetrahydrofuran- and dimethyl sulfoxide-water separation by glycerol and sucrose esters

Tetrahydrofuran (THF) and dimethylsulfoxide (DMSO) are miscible in water due to hydrogen (H) bonding. Amphiphilic glycerol and sucrose esters with a different number of tails and heads separate them, depending on the organic solvent concentration. Separation is worse in solutions where amphiphiles are most soluble. Separation occurs due to interactions between the amphiphiles and either organic solvents or water, as shown by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Separation is best with glycerol esters with more heads and tails. Multiple tails hamper interactions between glycerol ester heads, thereby facilitating interactions with organic solvents or water to promote solvent–water separation. THF interacts with the glycerol ester tails, while water H bonds with the glycerol ester heads, as indicated by activity coefficients estimated with conductor-like screening model for real solvents. In THF, amphiphiles self-assemble into micelles, as shown by small angle x ray scattering (SAXS). Without water, THF is likely both inside and outside the micelles. SAXS shows that micelles shrink with 4% water in THF because water molecules partition inside them and are smaller than THF. With additional water, micelles swell into emulsions. Dissimilar to THF, DMSO preferentially interacts with the glycerol ester heads rather than their tails. ATR-FTIR shows that the proportion of free vs bonded S=O groups of DMSO decreases upon mixing with glycerol esters. DMSO and glycerol esters primarily accept H bonds, as indicated by their sigma profile. This leads to competition for interactions with water, displacing DMSO.

Investigation of Antibody Tolerance in Methanol for Analytical Purposes: Methanol Effect Patterns and Molecular Mechanisms.

The extraction of targets from biological samples for immunoassays using organic solvents, such as methanol, is often necessary. However, high concentrations of organic solvents in extracts invariably lead to instability of the employed antibody, resulting in poor performance of the immunoassay. Evaluating the tolerance ability and exploring the molecular mechanisms of antibody tolerance in organic solvents are essential for the development of robust immunoassays. In this work, 25 monoclonal antibodies and methanol are utilized as models to address these questions. A novel protocol is initially established to precisely and rapidly determine antibody tolerance in methanol, identifying two distinct methanol effect patterns. Through a detailed investigation of the structural basis, a novel hypothesis regarding methanol effect patterns is proposed, termed "folding-aggregation," which is subsequently validated through molecular dynamics simulations. Furthermore, the investigation of sequence basis reveals significant differences in residue types within the complementarity-determining regions and ligand-binding residues, distinguishing the two antibody methanol effect patterns. Moreover, the methanol effect patterns of the antibodies are defined by germline antibodies. This work represents the first exploration of antibody methanol effect patterns and associated molecular mechanisms, with potential implications for the discovery and engineering of tolerant antibodies for the development of robust immunoassays.

A lipase from Lacticaseibacillus rhamnosus IDCC 3201 with thermostability and pH resistance for use as a detergent additive

Lipases are important biocatalysts and ubiquitous in plants, animals, and microorganisms. The high growth rates of microorganisms with low production costs have enabled the wide application of microbial lipases in detergent, food, and cosmetic industries. Herein, a novel lipase from Lacticaseibacillus rhamnosus IDCC 3201 (Lac-Rh) was isolated and its activity analyzed under a range of reaction conditions to evaluate its potential industrial application. The isolated Lac-Rh showed a molecular weight of 24 kDa and a maximum activity of 3438.5 ± 1.8 U/mg protein at 60 °C and pH 8. Additionally, Lac-Rh retained activity in alkaline conditions and in 10% v/v concentrations of organic solvents, including glycerol and acetone. Interestingly, after pre-incubation in the presence of multiple commercial detergents, Lac-Rh maintained over 80% of its activity and the stains from cotton were successfully removed under a simulated laundry setting. Overall, the purified lipase from L. rhamnosus IDCC 3201 has potential for use as a detergent in industrial applications.Key points• A novel lipase (Lac-Rh) was isolated from Lacticaseibacillus rhamnosus IDCC 3201• Purified Lac-Rh exhibited its highest activity at a temperature of 60 °C and a pH of 8, respectively• Lac-Rh remains stable in commercial laundry detergent and enhances washing performance

The Utilization of Chicken Egg White Waste-Modified Nanofiber Membrane for Anionic Dye Removal in Batch and Flow Systems: Comprehensive Investigations into Equilibrium, Kinetics, and Breakthrough Curve.

This study investigated the use of chicken egg white (CEW) waste immobilized on weak acidic nanofiber membranes for removing the anionic acid orange 7 (AO7) dye in batch and continuous flow modes. Different experiments were conducted to evaluate the effectiveness of CEW-modified nanofiber membranes for AO7 removal, focusing on CEW immobilization conditions, adsorption kinetics, and thermodynamics. The CEW-modified nanofiber membrane (namely NM-COOH-CEW) exhibited a maximum AO7 adsorption capacity of 589.11 mg/g within approximately 30 min. The Freundlich isotherm model best represented the equilibrium adsorption data, while the adsorption kinetics followed a pseudo-second-order rate model. Breakthrough curve analysis using the Thomas model and the bed depth service time (BDST) model showed that the BDST model accurately described the curve, with an error percentage under 5%. To investigate AO7 elution efficiency, different concentrations of organic solvents or salts were tested as eluents. The NM-COOH-CEW nanofiber membrane exhibited promising performance as an effective adsorbent for removing AO7 dye from contaminated water.

Multiple stimulus responsive of a novel naphthalenediimide-based 2D alkaline-earth metal MOF material: Hydrochromism, amine-/acid-induced chromism and ionochromism as well as visual artificial film application

Metal–organic frameworks (MOFs) with naphthalene-1,4,5,8-tetracarboxylic dianhydride (H4NDISA) chromophoric unit provide an intriguing platform for the design of multiple stimulus responsive materials. Herein, the first NDISA-based 2D MOF [Ca(H2NDISA)(DMF)3]∙H2O (Ca-NDISA) constructed from alkaline-earth metal ion was successfully synthesized. The structural analysis shown that a binuclear secondary building unit (SBU) [Ca2(COO)2(DMF)6] is extended to generate a 2D planar network structure with abundant open-activity sites, endowing Ca-NDISA with multiple stimulus responsive chromic behaviors. Ca-NDISA could undergo a color change from yellow to red in hydrochromism, rendering it with the applications in detecting the water content of organic solvents, as a humidity sensor when fabricating a PMMA@Ca-NDISA film, and a potential hydrochromic imaging material. In amine-/acid-induced chromism, Ca-NDISA respectively changed its color to red and brown when exposed to strong acid and some small size ammonia/organic amines vapors environment, which makes the PMMA@Ca-NDISA film as a visual and portable recognition detector for acids and amines. In ionochromism, Ca-NDISA is suitable for the naked-eye discrimination and detection of I− with obvious color change to black brown. Our work not only provide a facile way to obtain NDISA-based 2D MOF with multi-stimulus responsive chromic properties, but also present some convenient chromism devices, which will enrich the family of multifunctional chromic materials for practical applications.

Electrochemical Detection of Single Aqueous Droplets in Organic Solvents via Pitting Collisions.

We report a novel detection method for single aqueous droplets in organic solvents by the collisional contact of the droplet, inducing the partial deformation of the ultramicroelectrode (UME) surface. For various chemical reactions in organic solvents, water impurities affect the catalytic activity, leading to a loss of productivity and selectivity. Therefore, it is necessary to monitor the water content of organic solvents in real time between many chemical production processes, from the laboratory to the industrial scale. Our method enables the detection of water contamination by real-time monitoring of the electrochemical signals or observing morphological changes in the microelectrode. When an aqueous droplet collides with the UME, the contact area of the electrode is electrolyzed, forming pits on the surface where the droplet falls. Current transient analysis shows a unique current spike corresponding to the reaction inside the adsorbed single aqueous droplet, which differs from those detected by the faradaic/nonfaradaic reaction of collision of other particles. Moreover, this analytical method can record the history of collision events from pits on the UME surface, implying that inspecting the UME surface could be a quick screening method for solvent contamination. Based on a comparison of the electrochemical signals and morphological changes of the electrode after each event, the sizes of the pits and droplets are related. A COMSOL simulation is performed to explain the shape of the peak current and pit formation during collision events. This experimental concept elucidates the dynamic behavior of aqueous droplets on a positively biased metal electrode.

Silver nanoparticle-functionalized melamine-formaldehyde aerogel for online in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons followed by HPLC-DAD analysis

Based on the π-metal interaction between silver nanoparticles (AgNPs) and aromatic compounds, AgNPs were in-situ grown to melamine-formaldehyde (MF) aerogel for improving the extraction performance to polycyclic aromatic hydrocarbons (PAHs). The AgNPs/MF aerogel was regulated through varing the concentration of reactants, and characterized by scanning electron microscopy, X-ray photoelectron spectroscopy and X-ray powder diffraction. As a new extraction coating, the AgNPs/MF aerogel was coated to stainless-steel wires for in-tube solid-phase microextraction (IT-SPME). The extraction effects of MF aerogels before and after the modification of AgNPs were compared, and the AgNPs greatly improved the extraction ability for PAHs reaching to 166.4 %. Combining IT-SPME with high performance liquid chromatographic detection, an online analytical system was constructed. Furthermore, the sampling volume and rate, concentration of organic solvent, and desorption time were optimized factor by factor. The online analytical method with low detection limits (0.003–0.010 μg L−1) and efficient enrichment factors (1998–3237) for PAHs was established, which fastly detected trace level of PAHs in drinking and environmental water samples. Compared with other methods, the method was comparable or better in the detection limit and linear range, indicating prospective application of the AgNPs/MF aerogel for sample preparation.

Experimental study of mechanistic factors influencing solvent-driven fractional crystallization of calcium sulfate

To advance dimethyl ether-driven fractional crystallization (DME-FC), a more sustainable method of water treatment and mineral recovery, a range of chemical equilibria were measured. These include varying concentrations of miscible organic solvents (MOS) used to experimentally measure the solvent-induced solid-liquid equilibrium (SLE) of calcium sulfate (CaSO4) in water. Seven MOS, including dimethyl ether (DME), acetonitrile (MeCN), 1,4-dioxane, tetrahydrofuran (THF), acetone, ethanol, and diethylamine, were screened to establish trends associated with molecular volume, functional groups, and physical properties. The effect of MOS on CaSO4 removal differed at concentrations <0.15 mol fraction MOS; MOS with greater molecular volume (THF, 1,4-dioxane, and diethylamine) induced greater CaSO4 precipitation on a per mole basis. The solvent-induced SLE for all MOS converged between 0.15 and 0.2 mol fraction MOS, reaching a CaSO4 concentration consistent with a water to MOS hydration ratio of 5:1 to 6:1, which may correspond to the solvent generating a solution-based pseudo-clathrate structure with continuity within the solution. Solution pseudo-clathrate structures provide a mechanistic basis for DME-FC.

High concentration of organic solvents in aluminum MAO: A study of structural and tribological property

Ceramic coatings were prepared on the surface of 6061 aluminum alloy using micro arc oxidation (MAO) with high concentration of polyethylene glycol (PEG200) as electrolyte. In this paper, the real-time discharge process of MAO in different volume ratios of PEG200 electrolyte was recorded and the coatings were characterized as well as tested for abrasion and corrosion resistance. The results show that the coatings prepared in 50% PEG200 electrolyte produce more hard alumina crystalline phases with better surface lubrication and wear resistance, but higher porosity reduces their corrosion resistance. This is thought to be related to adsorption of molecular chains as well as soft spark discharge. By preparing high quality coatings in high concentrations of organic solvents, a feasible solution is provided to improve the structure and properties of the coatings.

A novel, robust peptidyl-lys metalloendopeptidase from Trametes coccinea recombinantly expressed in Komagataella phaffii

A novel peptidyl-lys metalloendopeptidase (Tc-LysN) from Tramates coccinea was recombinantly expressed in Komagataella phaffii using the native pro-protein sequence. The peptidase was secreted into the culture broth as zymogen (~38 kDa) and mature enzyme (~19.8 kDa) simultaneously. The mature Tc-LysN was purified to homogeneity with a single step anion-exchange chromatography at pH 7.2. N-terminal sequencing using TMTpro Zero and mass spectrometry of the mature Tc-LysN indicated that the pro-peptide was cleaved between the amino acid positions 184 and 185 at the Kex2 cleavage site present in the native pro-protein sequence. The pH optimum of Tc-LysN was determined to be 5.0 while it maintained ≥60% activity between pH values 4.5—7.5 and ≥30% activity between pH values 8.5—10.0, indicating its broad applicability. The temperature maximum of Tc-LysN was determined to be 60 °C. After 18 h of incubation at 80 °C, Tc-LysN still retained ~20% activity. Organic solvents such as methanol and acetonitrile, at concentrations as high as 40% (v/v), were found to enhance Tc-LysN’s activity up to ~100% and ~50%, respectively. Tc-LysN’s thermostability, ability to withstand up to 8 M urea, tolerance to high concentrations of organic solvents, and an acidic pH optimum make it a viable candidate to be employed in proteomics workflows in which alkaline conditions might pose a challenge. The nano-LC-MS/MS analysis revealed bovine serum albumin (BSA)’s sequence coverage of 84% using Tc-LysN which was comparable to the sequence coverage of 90% by trypsin peptides.Key points•A novel LysN from Trametes coccinea (Tc-LysN) was expressed in Komagataella phaffii and purified to homogeneity•Tc-LysN is thermostable, applicable over a broad pH range, and tolerates high concentrations of denaturants•Tc-LysN was successfully applied for protein digestion and mass spectrometry fingerprinting