NaBH4 Concentration Research Articles

Niobium Metal–Organic Framework Is an Efficient Catalytic Support for the Green Hydrogen Evolution Process from Metal Hydride

Herein, the development of a niobium-based metal–organic framework (Nb-MOF) designed to serve as a catalytic support for the production of hydrogen (H2) from sodium borohydride (NaBH4) is reported. The Nb-MOF was synthesized via a solvothermal method using niobium ammoniacal oxalate (AmOxaNb) as the metal source and 1,4-benzenedicarboxylic acid (BDC) as the ligand. The resulting MOF was characterized by Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The characterization study confirmed the successful synthesis of Nb-MOF. The catalytic activity was optimized by examining five key factors: (i) platinum (Pt) and cobalt (Co) bimetallic compositions (ranging from 1:0 to 0:1 mmol), (ii) NaBH4 concentration (0.2, 0.3, 0.4, and 0.5 mol L−1), (iii) the Nb-MOF/Pt–Co catalyst dose (0.05, 0.10, 0.20, and 0.40 mmol), (iv) sodium hydroxide (NaOH) concentration (0.01, 0.05, 0.1, and 0.2 mol L−1), and (v) system temperature (293.15, 298.15, 303.15, 313.15, and 323.15 K). The optimal catalyst was identified as Nb-MOF supporting a Pt-Co bimetallic composition in a 0.4:0.6 mmol ratio, achieving a hydrogen generation rate (HGR) of 1473 mL min−1 gcat−1 and an activation energy of 19.2 kJ mol−1. Furthermore, this catalyst maintained its efficiency over 20 cycles, demonstrating significant potential as a sustainable solution for H2 evolution from NaBH4.

High-Efficiency and Fast Hydrogen Production from Sodium Borohydride: The Role of Adipic Acid in Hydrolysis, Methanolysis and Ethanolysis Reactions.

In this study, hydrogen production through the hydrolysis, ethanolysis, and methanolysis reactions of NaBH4 using adipic acid as a catalyst was investigated for the first time. Adipic acid solutions were prepared with methanol and ethanol at concentrations of 0.1, 0.2, 0.3, 0.4, and 0.5 M. In these reactions, NaBH4-MR (methanolysis) and NaBH4-ER (ethanolysis) reactions were carried out at 30, 40, and 50 °C with NaBH4 concentrations of 1.25%, 2.5%, and 5%. Hydrolysis reactions (NaBH4-HR) were conducted at 0.1 M under the same conditions. In the ethanolysis and methanolysis reactions at 30 °C, total hydrogen conversion was achieved at 0.3 M, 0.4 M, and 0.5 M. However, in the hydrolysis reactions, total hydrogen production was only obtained at 50 °C. It was observed that in the NaBH4-MR and NaBH4-ER reactions, total hydrogen conversion could be achieved within 4-5 s. The utilization of adipic acid as a catalyst for hydrogen production from NaBH4 through ethanolysis and methanolysis reactions is proposed as a highly efficient and fast method, characterized by impressive conversion rates.

Preparation of Effective NiCrPd-Decorated Carbon Nanofibers Derived from Polyvinylpyrrolidone as a Catalyst for H2 Generation from the Dehydrogenation of NaBH4.

The catalytic dehydrogenation of NaBH4 for the generation of H2 has a lot of potential as a reliable and achievable approach to make H2, which could be used as a safe and cost-effective energy source in the near future. This work describes the production of unique trimetallic NiCrPd-decorated carbon nanofiber (NiCrPd-decorated CNF) catalysts using electrospinning. The catalysts demonstrated exceptional catalytic activity in generating H2 through NaBH4 dehydrogenation. The catalysts were characterized using SEM, XRD, TEM, and TEM-EDX analyses. NiCrPd-decorated CNF formulations have shown higher catalytic activity in the dehydrogenation of NaBH4 compared with NiCr-decorated CNFs. It is likely that the better catalytic performance is because the three metals in the NiCrPd-decorated CNF structure interact with each other. Furthermore, the NiCrPd-decorated CNFs catalyzed the dehydrogenation of NaBH4 with an activation energy (Ea) of 26.55 KJ/mol. The kinetics studies showed that the reaction is first-order dependent on the dose of NiCrPd-decorated CNFs and zero-order dependent on the concentration of NaBH4.

Magnetically separable Bi2O2CO3/MIL-101(Fe)/CoFe2O4 nanostructured catalysts for heterogeneous reductive remediation of nitrophenols and organic dyes

A new magnetically separable nanocomposite, Bi2O2CO3/MIL-101(Fe)/CoFe2O4, was successfully synthesized through a hydrothermal method. The composite was characterized through various analytical techniques. The nanocomposite demonstrated good catalytic efficiency in reducing nitroaromatic compounds and organic dyes by using NaBH4 reducing agent in aqueous solutions at room temperature. The apparent rate constant (kapp) values for 4-nitrophenol, 2-nitrophenol, 2-nitroaniline, and 4-nitroaniline were recorded at 0.457, 0.253, 1.52, and 0.564 min⁻¹, respectively, achieving complete conversion in just 2 to 9 min. Under similar conditions, methylene blue, methyl orange, rhodamine B, congo red, and crystal violet organic dyes were reduced to 98–100 % within 4 to 20 min, with kapp values ranging from 0.157 to 0.885 min⁻¹. Furthermore, the influence of catalyst dosage, NaBH4 concentration, and substrate concentration on the reduction process was examined. Importantly, the nanocomposite can be recovered using an external magnet and reused over four consecutive cycles without a significant reduction in catalytic efficiency.

Study of the Sodium Borohydride Hydrolysis Reaction's Performance via a Kaolin-Supported Co-Cr Bimetallic Catalyst

Hydrogen is an attractive source of energy because of its properties, which include superior quality, effectiveness, pureness, dependability, and sustainability. Technologies for producing and storing hydrogen are being developed in parallel with fuel cell development. Chemical storage of hydrogen in a metal hydride containing boron eliminates the problem of hydrogen transportation and storage. Through catalytic reactions, hydrogen stored in solid form in boron hydrides can be recovered. In this study, a nowel developed Co-Cr bimetallic catalyst supported by kaolin, a natural mineral, was synthesized to be used for hydrogen production by hydrolysis of sodium boron hydride. The structural characteristics of the produced Co-Cr@Kaolin catalyst were ascertained by EDX, FTIR, and SEM analyses. Next, the ideal conditions for the hydrolysis reaction of sodium borohydride (NaBH4) catalyzed by Co-Cr@Kaolin were examined. These included the concentration of the catalyst, the amount of support material (kaolin), the amount of catalyst, and the concentration of NaBH4. The optimal hydrolysis conditions were found to be 2.5% NaOH concentration, 40 mg of catalyst, and 2% NaBH4 concentration at 303 K. The maximum rate of hydrogen production was determined as 5007 ml g-1 min-1 under optimal conditions. After conducting hydrolysis operations at different temperatures to elucidate the reaction kinetics, it was found that the catalytic hydrolysis reaction was of the 0th order and that the reaction activation energy was 19.36 kJ mol-1. The hydrogen production rate obtained as a result of the hydrolysis reaction accompanied by a Co-Cr catalyst was determined as 3166 ml g-1 min-1. It is therefore established that supporting kaolin to Co-Cr catalyst enhances its efficacy.

Eco‐Friendly Preparation of Pectin‐Stabilized Ruthenium Catalyst for Hydrogen Generation from Sodium Borohydride Hydrolysis

AbstractIn this study, we report that pectin‐supported ruthenium nanoparticles (pectin@Ru0) can be easily prepared at room temperature by a simple and effective method and that they exhibit outstanding catalytic activity in the hydrolysis of sodium borohydride (NaBH4). The structure, oxidation state, morphology, and thermal studies were analyzed using XRD, XPS, SEM, TEM and TGA analysis. The kinetic performance of pectin@Ru0 biocatalyst was evaluated depending on ruthenium loading, NaBH4 concentration, NaOH concentration, temperature, reusability and storage. The pectin@Ru0 biocatalyst containing 2 wt.% Ru0 metal catalyzed the hydrolysis of 50 mM NaBH4+1 wt.% NaOH with 100 % yield. The activation energy (Ea) and the TOF values of the reaction was estimated as 54.7 kJ mol−1 and 53.1 mol H2 (mol Ru0 min) −1 at 30 °C and this is consistent with other previously reported catalysts, making it a remarkable result in comparison. Reusability and catalytic life studies reported that pectin@Ru0 biocatalyst is also highly active and relatively long‐lived catalyst in the hydrolysis of NaBH4 in a slightly basic solution.

Optimising Sodium Borohydride Reduction of Platinum onto Nafion-117 in the Electroless Plating of Ionic Polymer–Metal Composites

The effects of process parameters on the electroless plating of ionic polymer–metal composites (IPMCs) were studied in this work. Specifically, the NaBH4 reduction of platinum onto Nafion-117 was characterised. The effects of the concurrent variation of NaBH4 concentration, stir time and temperature on surface resistance were studied through a full factorial design. The three-factor three-level factorial design resulted in 27 runs. Surface resistance was measured using a four-point probe. A regression model with an R2 value of 97.45% was obtained. Surface resistance was found to decrease with increasing stir time (20 to 60 min) and temperature (20 to 60 °C). These responses were attributed to increased platinisation rates, resulting in more uniform electrode deposition, confirmed by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDAX) analysis. Surface resistance decreased, going from 1% to 5% NaBH4 concentration, but increased from 5% to 10% concentration. This behaviour was attributed to surface morphology: increased grain size inducing porous electrodes, in line with findings in the literature. The maximum tip displacement, measured through a computer vision system, as well as the maximum blocking force, measured through an analytical balance setup, were obtained for all 27 samples. The varying results were discussed with regards to surface and cross-sectional SEMs, alongside EDAX analysis.

Ruthenium nanoparticle immobilised on ionic liquid polymer as efficient catalyst for the hydrolysis of NaBH4

Development of heterogeneous catalyst is significant key for achieving high performance of NaBH4 hydrolysis to produce hydrogen. The stability of sodium borohydride in the presence of suitable catalyst is the efficient method to generate hydrogen. In this work, styrene-imid PIILP, polymer 1 decorated styrene, imidazolium ionic liquid, and cross-coupling is successfully synthesised by AIBN initiated radical polymerisation, then precipitation with 3,3′,3″phosphinetriyltribenzene sulfonate with ratio (1:0.3) to isolate the first styrene-imid- sulphonated PIILP, polymer 2. RuNP@styrene-imid-sulphonated PIILP, RuNPs catalyst 3 was synthesised by impregnation with RuCl3, then reduction by NaBH4. Moreover, several analytical techniques such as, 31P, 1H, 13C solid-state NMR, CHN, IR, XPS, TEM, TGA-DTA, and SEM were examined to explore the obtained catalyst 3. The hydrogen generation from NaBH4 utilizing catalyst 3 was exhibited the catalytic behaviour studying several parameters such as, temperature, catalytic loading, and NaBH4 concentrations this work was deducted the activation energy (30.32 kJmol-1), and the turnover frequency (TOF) reached up 134.9, 112.77, and 98.38 moleH2.molcat−1.min−1 at 40, 35 and 30 °C. The effectiveness of Ruthenium nanoparticle catalyst 3 for the hydrolysis reaction of NaBH4 was examined in H2O and D2O resulting kinetic isotope effect (KIE) kH/kD = 3. In addition, RuNPs demonstrated a promising efficient for reuse catalyst 3 after five cycles for the catalytic hydrolysis.

Hydrogen evolution from NaBH4 using novel Ni/Pt nanoparticles decorated on a niobium-based composite

The niobium-based nanocomposite (Nb-CP), inspired by MOF-based synthesis, was developed utilizing the ligands 4-benzenedicarboxylic acid (BDC) and 1,3,5-benzenetricarboxylic acid (BTC). This material was decorated with bimetallic nanoparticles (Ni2/Pt8 NPs-Nb-CP) and applied for the first time for hydrogen evolution from sodium borohydride (NaBH4). Characterization results indicated successful synthesis. The FT-IR analysis revealed the presence of functional groups such as -C-H, –CO, and -O-H from ligands in the composite. Thermogravimetric analysis confirmed the thermal stability of the niobium composite (Nb-CP). Through X-ray diffraction (XRD), peaks associated with sodium niobate were detected. Additionally, the material was functionalized with bimetallic Ni/Pt nanoparticles, whose presence was also identified by XRD. The cubic morphology of the material was observed, with the decoration of bimetallic nanoparticles (Ni2/Pt8 NPs-Nb-CP) with an average size of 7.80 ± 0.10 nm, uniformly distributed in Nb-CP. The catalytic performance of the material was evaluated in hydrogen evolution from NaBH4. Various reaction parameters were investigated, such as nanoparticle composition, variation in NaBH4 concentration, catalyst dose, NaOH concentration, and temperature. Remarkably, the material exhibited a hydrogen generation rate (HGR) of 1782 mL min−1 g−1cat and an activation energy of 23.1 kJ mol−1. Furthermore, it demonstrated efficiency close to 100% over 16 consecutive reaction cycles, indicating its promising stability and reusability. This study highlights the potential of Ni2/Pt8 NPs-Nb-CP as an efficient and durable catalyst for hydrogen production through borohydride hydrolysis, providing insights into the design and application of advanced heterogeneous catalytic materials.

Gold Nanoparticle Mesoporous Carbon Composite as Catalyst for Hydrogen Evolution Reaction.

Increased environmental pollution and the shortage of the current fossil fuel energy supply has increased the demand for eco-friendly energy sources. Hydrogen energy has become a potential solution due to its availability and green combustion byproduct. Hydrogen feedstock materials like sodium borohydride (NaBH4) are promising sources of hydrogen; however, the rate at which the hydrogen is released during its reaction with water is slow and requires a stable catalyst. In this study, gold nanoparticles were deposited onto mesoporous carbon to form a nano-composite catalyst (AuNP-MCM), which was then characterized via transmission electron microscopy (TEM), powder X-ray diffraction (P-XRD), and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). The composite's catalytic ability in a hydrogen evolution reaction was tested under varying conditions, including NaBH4 concentration, pH, and temperature, and it showed an activation of energy of 30.0 kJ mol-1. It was determined that the optimal reaction conditions include high NaBH4 concentrations, lower pH, and higher temperatures. This catalyst, with its stability and competitively low activation energy, makes it a promising material for hydrogen generation.

Ultrasonic assisted green synthesis of CuO nanoparticles: a real catalytic and antimicrobial agent

ABSTRACT This study reported facile biosynthesis of CuO nanoparticles employing leaf extract of Prosopis glandulosa as a stabilising agent by modest ultrasonic assisted technique. The synthesised nanoparticles were characterised via greatly refined systems comprising UV-visible, FTIR, XRD, SEM EDX, Zeta sizer, and Zeta potential. These facilities triggered the study of optical, functionality, crystallinity, surface morphology, elemental composition, and surface potential of the synthesised nanoparticles. The SEM and FT-IR analysis confirmed the semi-spherical shapes and functionalities of the synthesised NPs respectively. The zeta size and zeta potential of CuO NPs were established to be 65 nm and −1.42 mV respectively. The resultant NPs were applied as an efficient antimicrobial and catalytic candidate for the successful degradation of Eriochrome Black T (EBT) dye. Various factors were optimised such as dose, time, and NaBH4 concentration to achieve maximum catalytic efficiency of CuO nanoparticles. The NPs show excellent catalytic performance of about 92% degradation of EBT within 30 minutes. The antimicrobial performance was also tested by varying the concentration of NPs (250, 500, 1000, and 2000 g/mL via disc diffusion protocol. The results show that CuO NPs have excellent antibacterial activity alongside E. coli at MIC values of 250 g/mL as equated to S. areas and Aspergillus niger.

Application of Silver Nanoparticles Supported over Mesoporous Carbon Produced from Sustainable Sources as Catalysts for Hydrogen Production

The growing population and increasingly competitive economic climate have increased the demand for alternative fuel sources, with hydrogen being one of the more viable options. Many metal hydrides, including sodium borohydride, are capable of releasing hydrogen stored within chemical bonds when reacted with water, but the rate of generation is slow and therefore necessitates a catalyst. Silver nanoparticles, which were chosen due to their known catalytic activity, were synthesized from sodium citrate and were embedded in mesoporous carbon to form a nano-composite catalyst (Ag-MCM). This composite was characterized via Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD), and Scanning Electron Microscopy/Energy-Dispersive X-ray Spectroscopy (SEM/EDS). Catalytic testing showed that the catalytic activity for the Ag-MCM catalyst increased with increasing NaBH4 concentration, low pH, and high temperatures. The Ag-MCM catalyst resulted in the activation energy at 15.6 kJ mol−1, making it one of the lowest seen activation energies for inorganic catalysts. Lastly, the Ag-MCM catalysts showed stability, producing, on average, 20.0 mL per trial for five consecutive trials. This catalytic ability along with the cheap, carbon-based backbone that is made from readily available corn starch, makes it a promising catalyst for the hydrolysis of NaBH4.

MOF derived cobalt-phospho-boride for rapid hydrogen generation via NaBH4 hydrolysis

Developing effective transition metal catalysts that can replace precious metal-based catalysts for hydrogen generation from the hydrolysis of chemical hydride has attracted extensive interest. This study focuses on synthesizing cobalt phospho-boride (CoPB) within a metal-organic framework (MOF) framework using hydrothermal and chemical reduction methodologies. Incorporating boron and phosphorous into Co-MOF enhances the hydrogen generation rate, reaching 1.8 L/min/g and 3.6 L/min/g for CoB-MOF and CoPB-MOF, respectively, during NaBH4 hydrolysis. Along with the nanostructured morphology of MOF, the electron modulation around Co-sites due to the presence of P and B creates a synergic effect to produce this high H2 generation rate and very low activation energy of 20.7 kJ/mol. The kinetic studies on NaBH4 hydrolysis reaction revealed zero-order kinetics with respect to NaBH4 concentration for CoPB-MOF, where porous morphology renders facile movement of BH4− ions to the active sites. The heat treatment at 773 K in the N2 atmosphere did not show any significant fall in the activity of CoPB-MOF, thus showcasing its robust nature. Moreover, the present catalyst also displayed recycling behavior with no signs of deactivation.

Reoxidation dynamics of the methylene blue reduced by laser-synthesized silver nanoparticle

The catalytic reduction of methylene blue (MB) by metal nanoparticles and subsequent reoxidation is widely recognized and often referred to as a "redox reaction." The reduction mechanism of MB has been extensively studied and is well understood but its reoxidation has received little attention. Here we report an experimental study on the reoxidation dynamics of MB reduced by silver nanoparticles (Ag NPs). Ag NPs synthesized using the Pulsed Laser Ablation (PLAL) technique are used to reduce MB in the presence of the reducing agent NaBH4. The reduction/reoxidation dynamics are monitored using UV−Vis spectroscopy through the decrease/increase of characteristic MB absorbance peak and color switching between methylene blue and leucomethylene (LMB). The influence of the various volumetric concentrations of Ag NPs and NaBH4 on reoxidization dynamics of reduced MB is investigated. The reoxidation of reduced MB exhibited almost linear growth over time for different concentrations of both Ag NPs and NABH4 used in the reduction process. Higher NaBH4 concentrations appeared to decelerate the reoxidation process, while the concentration of Ag NPs had no discernible impact on the reoxidation rate. The reduction of reoxidized MB after adding additional amounts of Ag NPs and NaBH4 revealed that Ag NPs remained stable in the reaction medium but NaBH4 deteriorated. Therefore, the deterioration of the NaBH4 is identified as the major cause of the reoxidation of the reduced MB. A series of reduction-reoxidation experiments using chemically synthesized Ag NPs indicated that MB reoxidation is not limited to laser-synthesized Ag NPs.

Tandem hydrogenation/hydrogenolysis of furfural to 2-methylfuran over multifunctional metallic Cu nanoparticles supported ZIF-8 catalyst

Catalytic transfer hydrogenation (CTH), that employs protic solvents as hydrogen sources to alleviate the use of molecular hydrogen H2, has gained great attention. This work, reports multifunctional, metallic Cu nanoparticles supported ZIF-8 material for CTH of furfural to a highly valued fuel additive, 2-methylfuran (2-MF) using 2-propanol. Of all as-synthesized xCu(yM)/ZIF-8 catalysts with varied NaBH4 concentration (yM) and Cu loading (x), 11Cu(1.5 M)/ZIF-8 exhibited higher catalytic activity with > 99 % FAL conversion and 93.9 % 2-MF selectivity. This is ascribed to its high specific surface area, and existence of optimum amount of Lewis acid-base sites along with Cu0 species, which are responsible for hydrogenation of furfural to furfuryl alcohol and subsequent hydrogenolysis to produce 2-MF. The present work reports a highly efficient and stable, metal-MOF hybrid material for CTH of FAL to 2-MF, which is one among the best reports available in literature, therewith suggests a promising approach for bio-oil upgradation.

Activated carbon assisted cobalt catalyst for hydrogen production: synthesis and characterization

In this work, a cobalt catalyst supported by activated carbon was used to produce hydrogen through the hydrolysis of sodium borohydride (NaBH4). First, hydrochar was produced from MDF powder by hydrothermal pretreatment. Then, ideal parameters (activator percentage, activation time, baking time, and temperature) for activated carbon production were determined. The best conditions for the synthesis of activated carbon were found to be a 70% activator rate, 24 hours of activation time, 45 minutes of baking time, and 700 ⁰C temperature, according to iodine number measurements. The iodine number was measured as 929 mg/g under optimum conditions. Activated carbon (as a support) produced under optimum conditions was combined with the cobalt catalyst. DT/TGA, FT-IR, SEM, and EDX analyses were used to evaluate the catalyst's structure. Supporting material ratio, NaOH concentration, catalyst amount, and NaBH4 concentration are the variables studied in catalyst synthesis. The trials led to the identification of the optimal catalyst parameters as being 70% support material, 5% NaOH, 40 mg catalyst, and 2% NaBH4 concentration. The hydrogen production rate with the catalyst synthesized in these conditions was determined as 8592.8 ml/g.min. As a result of the hydrolysis reactions carried out at different temperatures, it was determined that the reaction was n. order and the reaction activation energy was 31.19 kJ/mol. Even after the sixth use, 100% efficiency was attained when the catalyst activity was tested repeatedly.

Hydrogen generation from methanolysis of sodium borohydride using boric acid as a catalyst

ABSTRACT Hydrogen plays a critical role in reducing dependence on fossil fuels and combating climate change as a clean, highly efficient, and renewable energy source. In this study, hydrogen production via methanolysis of sodium borohydride (NaBH4) has been investigated in the presence of boric acid (H3BO3) catalyst. The effect of various parameters on hydrogen generation rate has been reported and the effect of temperature, H3BO3 catalyst concentration, methanol volume and NaBH4 concentration has been studied in the range of 20–50°C, 0.539–2.695 mM, 2–20 mL, and 0.176–0.881 mM, respectively. The kinetic parameters are estimated with the power law model and the reaction order and activation energy are found as 2 and 33.25 kJ·mol−1, respectively. The highest hydrogen generation rate (HGR) is achieved as 628,117 mL·min−1·g cat−1 at 50°C with 1.078 mM H3BO3 and 0.352 M NaBH4 concentrations and 15 mL methanol volume. This study’s notable result is the emphasis on the effect of using a very small amount of boric acid. Because the use of a high amount of boric acid as a catalyst causes steric hindrance in the methanolysis reaction of trimethyl borate, which is the product of the equilibrium reaction between boric acid and excess alcohol in the solution. This situation has been avoided by using a lower amount of boric acid. Thus, it demonstrates that environmentally friendly, efficient, and cost-effective boric acid has great potential in hydrogen production via methanolysis and that its performance can be further improved with more work on the optimization of catalyst concentration.

CuMOF@Faujasite nanocomposite as a novel catalyst for hydrogen production

Energy production is one of the most crucial issues presently attracting global attention. In this work, a CuMOF@Faujasite nanocomposite was synthesized and utilized as a novel efficient catalyst for hydrogen production. The produced composite was first characterized using X‐ray diffraction (XRD), Fourier‐ transform infrared (FT‐IR), thermogravimetric analysis (TGA), and differential scanning calorimetry. Surface properties were analyzed via nitrogen adsorption–desorption isotherms. All characterization results revealed the formation of a pure and well‐defined crystalline phase, with a high specific surface area (SBET) of 286 m2/g (SBET of Faujasite is 35 m2/g). Moreover, the morphology and compositional analysis of the nanocomposite were assured through the scanning (SEM) and transmission (TEM) electron microscope and X‐ray photospectroscopy (XPS). SEM and TEM images revealed sponge‐like spheres that are related to Faujasite besides small spherical particles related to CuBDC MOF. XPS analysis revealed a low content of CuMOF in the nanocomposite. The catalytic activity of the nanocomposite was tested for the dehydrogenation of NaBH4. The impact of NaBH4 concentration, weight of the catalyst, and the reaction temperature on NaBH4 hydrolysis was investigated. A hydrogen generation rate (HGR) of 484 mLmin−1 g−1 at 30 °C was achieved using 50 mg of the catalyst and 0.05 mol/l of NaBH4 owing to the high specific area and the selective active sites for such hydrolytic reaction. The kinetic analysis of the activity data indicates the first‐order behavior at low concentrations of NaBH4. Furthermore, at concentrations ≥0.065 mol L−1, zero‐order kinetics was predominant. The time needed for completion of the hydrolysis reaction was found to be decreased (~20 min) by increasing the catalyst mass as well as NaBH4 concentration or even by elevating the reaction temperature (~4 min at 60 °C). The activation energy was estimated; it was found to be 70.5 KJ mol−1. Ultimately, our catalyst showed a reasonable rate of hydrogen production, as compared to others reported earlier.

Global and single-nucleotide resolution detection of 7-methylguanosine in RNA

ABSTRACT RNA modifications, including N-7-methylguanosine (m7G), are pivotal in governing RNA stability and gene expression regulation. The accurate detection of internal m7G modifications is of paramount significance, given recent associations between altered m7G deposition and elevated expression of the methyltransferase METTL1 in various human cancers. The development of robust m7G detection techniques has posed a significant challenge in the field of epitranscriptomics. In this study, we introduce two methodologies for the global and accurate identification of m7G modifications in human RNA. We introduce borohydride reduction sequencing (Bo-Seq), which provides base resolution mapping of m7G modifications. Bo-Seq achieves exceptional performance through the optimization of RNA depurination and scission, involving the strategic use of high concentrations of NaBH4, neutral pH and the addition of 7-methylguanosine monophosphate (m7GMP) during the reducing reaction. Notably, compared to NaBH4-based methods, Bo-Seq enhances the m7G detection performance, and simplifies the detection process, eliminating the necessity for intricate chemical steps and reducing the protocol duration. In addition, we present an antibody-based approach, which enables the assessment of m7G relative levels across RNA molecules and biological samples, however it should be used with caution due to limitations associated with variations in antibody quality between batches. In summary, our novel approaches address the pressing need for reliable and accessible methods to detect RNA m7G methylation in human cells. These advancements hold the potential to catalyse future investigations in the critical field of epitranscriptomics, shedding light on the complex regulatory roles of m7G in gene expression and its implications in cancer biology.

Hydrogen production from sodium borohydride using Co nanoparticles

In this study, hydrogen [H2(g)] production from sodium borohydride (NaBH4) using cobalt (Co) nanoparticles (NPs) was investigated with a hydrolysis process. Optimum experimental conditions were examined at different hydrolysis times (5, 10, 20, 30, 40, 50, 60, 70, 80, and 90 min), at different hydrolysis temperatures (25, 35, 45, and 65oC), and at increasing Co NPs nanocatalyst concentrations (5, 15 and 30 mg/l) at pH = 13.0, respectively. X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM) analyses were performed for characterization studies. H2(g) measurements were made in gaschromatography–mass spectrometry (GC-MS). The maximum 81% H2(g) yield was observed before the hydrolysis process after 90 min, at pH = 13.0, at 25 oC. The maximum H2(g) yields were recorded as 98% after 45 min hydrolysis times at 45 oC, at a pH of 13.0. 99% H2(g) yields were found after 14 min hydrolysis times, at pH a pH of 13.0 at 65 oC. The maximum NaBH4 concentration and using Co NPs concentrations were kept constant at 300 mg/l and 1.5 mg/l, respectively.