Concentrations Of Beclomethasone Dipropionate Research Articles

Fabrication, characterization and optimization of nanostructured lipid carrier formulations using Beclomethasone dipropionate for pulmonary drug delivery via medical nebulizers

Aerosolization is a non-invasive approach in drug delivery for localized and systemic effect. Nanostructured lipid carriers (NLCs) are new generation versatile carriers, which offer protection from degradation and enhance bioavailability of poorly water soluble drugs. The aim of this study was to develop and optimize NLC formulations in combination with optimized airflow rates (i.e. 60 and 15 L/min) and choice of medical nebulizers including Air jet, Vibrating mesh and Ultrasonic nebulizer for superior aerosolization performance, assessed via a next generation impactor (NGI). Novel composition and combination of NLC formulations (F1 – F15) were prepared via ultrasonication method, employing five solid lipids (glycerol trimyristate (GTM), glycerol trilaurate (GTL), cetyl palmitate (CP), glycerol monostearate (GMS) and stearic acid (SA)); and three liquid lipids (glyceryl tributyrate (GTB), propylene glycol dicaprylate/dicaprate (PGD) and isopropyl palmitate (IPP)) in 1:3 w/w ratios (i.e. combination of one solid and one liquid lipid), with Beclomethasone dipropionate (BDP) incorporated as the model drug. Out of fifteen BDP-NLC formulations, the physicochemical properties of formulations F7, F8 and F10 exhibited desirable stability (one week at 25 °C), with associated particle size of ~241 nm, and >91% of drug entrapment. Post aerosolization, F10 was observed to deposit notably smaller sized particles (from 198 to 136 nm, 283 to 135 nm and 239 to 157 nm for Air jet, Vibrating mesh and Ultrasonic nebulizers, respectively) in all stages (i.e. from stage 1 to 8) of the NGI, when compared to F7 and F8 formulations. Six week stability studies conducted at 4, 25 and 45 °C, demonstrated F10 formulation stability in terms of particle size, irrespective of temperature conditions. Nebulizer performance study using the NGI for F10 identified the Air jet to be the most efficient nebulizer, depositing lower concentrations of BDP in the earlier stages (1–3) and higher (circa 82 and 85%) in the lateral stages (4–8) using 60 and 15 L/min airflow rates, when compared to the Vibrating mesh and Ultrasonic nebulizers. Moreover, at both airflow rates, the Air jet nebulizer elicited a longer nebulization time of ~42 min, facilitating aerosol inhalation for prophylaxis of asthma with normal tidal breathing. Based on characterization and nebulizer performance employing both 60 and 15 L/min airflow rates, the Air jet nebulizer offered enhanced performance, exhibiting a higher fine particle dose (FPD) (90 and 69 µg), fine particle fraction (FPF) (70 and 54%), respirable fraction (RF) (92 and 69%), and lower mass median aerodynamic diameter (MMAD) (1.15 and 1.62 µm); in addition to demonstrating higher drug deposition in the lateral parts of the NGI, when compared to its counterpart nebulizers. The F10 formulation used with the Air jet nebulizer was identified as being the most suitable combination for delivery of BDP-NLC formulations.

Semi-mechanistic PK/PD model to assess pulmonary targeting of beclomethasone dipropionate and its active metabolite

PurposeThe objective of this study was to describe the pulmonary targeting of beclomethasone dipropionate (BDP) and its active metabolite beclomethasone 17-monopropionate (BMP) in rats using a semi-mechanistic PK/PD model. MethodsRat plasma and tissue concentrations of BDP and BMP, and tissue receptor occupancies of BMP after systemic and pulmonary delivery of BDP and BMP were integrated in a newly developed semi-mechanistic PK/PD model. ResultsAfter IV administration of BDP, 95.4% of BDP was converted to BMP, while after pulmonary delivery of BDP, 46.6% of deposited BDP was absorbed as BMP. The developed semi-mechanistic PK model described plasma and tissue concentrations of BDP and BMP as well as receptor occupancies sufficiently well. The model incorporated dissolution, metabolic activation, and drug absorption processes to describe the local fate of BDP and BMP after systemic and pulmonary delivery. Dissolution rate constants of BDP and BMP were estimated to be 0.47/h and 2.01/h, respectively, and the permeabilities in central lung were estimated to be 15.0 and 2.9 × 106 cm/s for BDP and BMP, respectively. The EC50 of the binding of BMP to to the receptor was estimated to be 0.0017 ng/ml. Overall, receptor occupancies in the lung were more pronounced than those in the systemic circulation after pulmonary delivery of BDP or BMP. Simulations using the developed semi-mechanistic PK/PD model demonstrated that a slow dissolution rate and low permeability can improve pulmonary targeting. ConclusionsA semi-mechanistic model was developed to describe the fate of an inhaled glucocorticoid pro-drug and its active metabolite in lung and the systemic circulation, both after pulmonary and systemic administration , thereby facilitating the understanding of the complex interplay between drug, prodrug and pharmacodynamic properties for quantifying the degree pulmonary targeting.

Limitations of high dose carrier based formulations

PurposeThis study was performed to investigate how increasing the active pharmaceutical ingredient (API) content within a formulation affects the dispersion of particles and the aerosol performance efficiency of a carrier based dry powder inhalable (DPI) formulation, using a custom dry powder inhaler (DPI) development rig. MethodsFive formulations with varying concentrations of API beclomethasone dipropionate (BDP) between 1% and 30% (w/w) were formulated as a multi-component carrier system containing coarse lactose and fine lactose with magnesium stearate. The morphology of the formulation and each component were investigated using scanning electron micrographs while the particle size was measured by laser diffraction. The aerosol performance, in terms of aerodynamic diameter, was assessed using the British pharmacopeia Apparatus E cascade impactor (Next generation impactor). Chemical analysis of the API was observed by high performance liquid chromatography (HPLC). ResultsIncreasing the concentration of BDP in the blend resulted in increasing numbers and size of individual agglomerates and densely packed BDP multi-layers on the surface of the lactose carrier. BDP present within the multi-layer did not disperse as individual primary particles but as dense agglomerates, which led to a decrease in aerosol performance and increased percentage of BDP deposition within the Apparatus E induction port and pre-separator. ConclusionAs the BDP concentration in the blends increases, aerosol performance of the formulation decreases, in an inversely proportional manner. Concurrently, the percentage of API deposition in the induction port and pre-separator could also be linked to the amount of micronized particles (BDP and Micronized composite carrier) present in the formulation. The effect of such dose increase on the behaviour of aerosol dispersion was investigated to gain greater insight in the development and optimisation of higher dosed carrier-based formulations.

Waterborne beclomethasone dipropionate affects the physiology of fish while its metabolite beclomethasone is not taken up

Asthma is commonly treated with inhalable glucocorticosteroids, including beclomethasone dipropionate (BDP). This is a synthetic prodrug which is metabolized to the more active monopropionate (BMP) and free beclomethasone in humans. To evaluate potential effects of residual drugs on fish, we conducted a 14day flow-through exposure experiment with BDP and beclomethasone using rainbow trout, and analyzed effects on plasma glucose, hepatic glutathione and catalase activity together with water and body concentrations of the BDP, BMP and beclomethasone. We also analyzed hepatic gene expression in BDP-exposed fish by microarray and quantitative PCR. Beclomethasone (up to 0.65μg/L) was not taken up in the fish while BDP (0.65 and 0.07μg/L) resulted in accumulation of both beclomethasone, BMP and BDP in plasma, reaching levels up to those found in humans during therapy. Accordingly, exposure to 0.65μg/L of BDP significantly increased blood glucose as well as oxidized glutathione levels and catalase activity in the liver. Exposure to beclomethasone or the low concentration of BDP had no effect on these endpoints. Both exposure concentrations of BDP resulted in significantly higher transcript abundance of phosphoenolpyruvate carboxykinase involved in gluconeogenesis, and of genes involved in immune responses. As only the rapidly metabolized prodrug was potent in fish, the environmental risks associated with the use of BDP are probably small. However, the observed physiological effects in fish of BDP at plasma concentrations known to affect human physiology provides valuable input to the development of read-across approaches in the identification of pharmaceuticals of environmental concern.

Synthetic Glucocorticoids in the Environment: First Results on Their Potential Impacts on Fish

Human pharmaceuticals have been shown to be entering the aquatic environment in quantities that may produce adverse effects to aquatic organisms. This paper investigates the impacts of synthetic glucocorticoids (GCs), which are used in large amounts as anti-inflammatory drugs, on fish. Mammalian cell lines were transiently transfected with trout corticosteroid receptors (GR1, GR2, and MR) and the transactivation abilities of ten of the most prescribed GCs in the UK were measured in vitro. They showed significantly higher activity with GR2 than with GR1. In order to assess any impacts in vivo, adult fathead minnows were exposed to either 1 μg prednisolone/L or 1 μg beclomethasone dipropionate/L for 21 days. Plasma glucose concentrations were increased and leucocytes were reduced significantly in GC-exposed groups compared to the control group. In another experiment, fish were exposed to three different concentrations of Beclomethasone dipropionate and a dose-dependent increase of plasma glucose was found. The results suggest that low concentrations of synthetic GCs present in water could cause adverse effects on fish. Therefore, quantification of GCs in the aquatic environment and the effects of GCs at environmentally relevant concentrations are required in order to determine if GCs pose a threat to wild fish populations.

Transient drug supersaturation kinetics of beclomethasone dipropionate in rapidly drying films

Supersaturation is an effective method to enhance the delivery of active compounds into the skin, however the long-term instability of the drug in these formulations that exceed thermodynamic unity prevents clinical use. The creation of supersaturation in situ by volatile solvent evaporation after application may overcome this. The aim of this study was to determine how altering the kinetics of transient supersaturation and recrystallisation would effect the rate of beclomethasone dipropionate (BDP) release from metered dose aerosols (MDA) that also consisted of hydrofluoroalkane 134a, ethanol (EtOH), and poly(vinyl pyrrolidone) (PVP) K90. An MDA containing 10% EtOH generated a sub-saturated concentration of BDP immediately after dose actuation and did not become supersaturated until 30 min post-actuation. Increasing the EtOH to 20% (w/w) and thus the BDP to 1.76% created supersaturation upon dose actuation but the drug recyrstallised within minutes of application. It was shown that the formulations with higher DS had accelerated rates of release despite rapid recrystallisation (444.9 ± 79.3 μg/(cm 2 h) for the fastest compared to 206.5 ± 23.0 μg/(cm 2 h) for the slowest). In highly volatile sprays maintaining BDP supersaturation for extended periods of time was less important than generating instantaneous, high levels of supersaturation to enhance drug release.

Preparation of Ultrafine Beclomethasone Dipropionate Drug Powder by Antisolvent Precipitation

The purpose of this study was to prepare ultrafine beclomethasone dipropionate (BDP) powder via antisolvent precipitation without any surfactants. Various solvents were screened to determine the suitable system for optimum processing while deionized water was kept as the antisolvent. Methanol was selected as the solvent, because a higher degree of supersaturation could be achieved. Several experimental parameters, such as the volume ratio of solution to antisolvent, the concentration of BDP−methanol solution, the temperature, and the stirring speed and time, were investigated in the methanol−deionized water system. The results showed that the yielded powder had a mean particle length of 850 nm and 85% of the particles were distributed in the range of 0.2−1.2 μm, whereas the raw particle size was 2.13 μm, ranging in size from 0.2 μm to 12 μm. Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) analysis indicated no change in chemical group structure and crystal structure during the ...

Monitoring the initial pulmonary absorption of two different beclomethasone dipropionate aerosols employing a human lung reperfusion model

BackgroundThe pulmonary residence time of inhaled glucocorticoids as well as their rate and extend of absorption into systemic circulation are important facets of their efficacy-safety profile. We evaluated a novel approach to elucidate the pulmonary absorption of an inhaled glucocorticoid. Our objective was to monitor and compare the combined process of drug particle dissolution, pro-drug activation and time course of initial distribution from human lung tissue into plasma for two different glucocorticoid formulations.MethodsWe chose beclomethasone dipropionate (BDP) delivered by two different commercially available HFA-propelled metered dose inhalers (Sanasthmax®/Becloforte™ and Ventolair®/Qvar™). Initially we developed a simple dialysis model to assess the transfer of BDP and its active metabolite from human lung homogenate into human plasma. In a novel experimental setting we then administered the aerosols into the bronchus of an extracorporally ventilated and reperfused human lung lobe and monitored the concentrations of BDP and its metabolites in the reperfusion fluid.ResultsUnexpectedly, we observed differences between the two aerosol formulations Sanasthmax®/Becloforte™ and Ventolair®/Qvar™ in both the dialysis as well as in the human reperfusion model. The HFA-BDP formulated as Ventolair®/Qvar™ displayed a more rapid release from lung tissue compared to Sanasthmax®/Becloforte™. We succeeded to explain and illustrate the observed differences between the two aerosols with their unique particle topology and divergent dissolution behaviour in human bronchial fluid.ConclusionWe conclude that though the ultrafine particles of Ventolair®/Qvar™ are beneficial for high lung deposition, they also yield a less desired more rapid systemic drug delivery. While the differences between Sanasthmax®/Becloforte™ and Ventolair®/Qvar™ were obvious in both the dialysis and lung perfusion experiments, the latter allowed to record time courses of pro-drug activation and distribution that were more consistent with results of comparable clinical trials. Thus, the extracorporally reperfused and ventilated human lung is a highly valuable physiological model to explore the lung pharmacokinetics of inhaled drugs.

A comparison of two methods to determine the solubility of compounds in aerosol propellants

A new on-line reverse phase HPLC method for determining the solubility of compounds in propellant based metered dose inhaler (MDI) formulations was compared with a conventional method. The new method employs a direct injection from a MDI vial into the needle injector port of a manual injector. To evaluate the two methods, beclomethasone dipropionate (BDP), 5,5-diphenyl hydantoin and 3,3′-diindolylmethane, were used as model compounds in propellant HFA-134a. Comparison was performed by analyzing known and unknown concentrations of BDP in various combinations of HFA-134a and ethanol. In addition, the solubility of 5,5-diphenyl hydantoin and 3,3′-diindolylmethane were determined in HFA-134a using both the new and the conventional methods. The two methods were found to be in good agreement with each other, with the new direct injection technique offering enhanced precision and accuracy along with considerable reduction in analysis time.

Application of USP Inlet Extensions to the TSI Impactor System 3306/3320 Using HFA 227 Based Solution Metered Dose Inhalers

ABSTRACTThe objective of this study was to further evaluate the need for a vertical inlet extension when testing solution metered dose inhalers using the TSI Model 3306 Impactor Inlet in conjunction with the TSI Model 3320 Aerodynamic Particle Sizer (APS). The configurations tested using the TSI system were compared to baseline measurements that were performed using the Andersen Mark II 8-stage cascade impactor (ACI). Seven pressurized solution metered dose inhalers were tested using varied concentrations of beclomethasone dipropionate (BDP), ethanol, and HFA 227 propellant. The inhalers were tested with the cascade impactor, and with the TSI system. The TSI system had three different configurations as the manufacturer provided (0 cm) or with inlet extensions of 20 and 40 cm. The extensions were located between the USP inlet and the Model 3306 Impactor Inlet. There were no practical differences between each system for the stem, actuator, or USP inlet. The fine particle mass (aerodynamic mass < 4.7 µm) was affected by extension length and correlated well with the ACI when an extension was present. APS particle size measurements were unaffected by the extension lengths and correlated well to particle size determined from the ACI analysis. It has been confirmed that an inlet extension may be necessary for the TSI system in order to give mass results that correlate to the ACI, especially for formulations having significant concentrations of low volatility excipients. Additionally, the results generated from this study were used to evaluate the product performance of HFA 227 based solution formulations that contain varying concentrations of ethanol as a cosolvent.

Sensitive liquid chromatographic/tandem mass spectrometric method for the determination of beclomethasone dipropionate and its metabolites in equine plasma and urine.

Beclomethasone dipropionate (BDP) is a potent pro-drug to beclomethasone (BOH) and is used in the treatment of chronic and acute respiratory disorders in the horse. The therapeutic dose of BDP (325 microg per horse) by inhalation results in very low plasma and urinary concentrations of BDP and its metabolites that pose a challenge to detection and confirmation by equine forensic laboratories. To solve this problem, a method involving the use of a liquid chromatography coupled with tandem mass spectrometry (LC/MS/MS) was developed for the detection, confirmation and quantification of the analytes in equine samples. Ammonium formate or acetate buffer added to LC mobile phase favored the formation of [M + H](+) ions from BDP and its metabolites, whereas formic acid led to the formation of sodium and potassium adduct ions ([M + Na](+), [M + K](+)) together with [M + H](+) ions. Acetonitrile, on the other hand, favored the formation of abundant solvent adduct ions [M + H + CH(3)CN](+) with the analytes under electrospray ionization (ESI) and atmospheric pressure chemical ionization conditions. In contrast, methanol formed much less solvent adduct ions than acetonitrile. The solvent adduct ions were thermally stable and could not be completely desolvated under the experimental conditions, but they were very fragile to collision-induced dissociation (CID). Interestingly, these solvent adduct ions were observed on a triple-quadrupole mass spectrometry but not on an ion trap instrument where helium used as a damping gas in the ion trap might cause the solvent adduct ions desolvated by collision. By CID studies on the [M + H](+) ions of BDP and its metabolites, their fragmentation paths were proposed. In equine plasma at ambient temperature over 2 h, BDP and B21P were hydrolyzed in part to B17P and BOH, respectively, but B17P was not hydrolyzed. Sodium fluoride added to equine plasma inhibited the hydrolysis of BDP and B21P. The matrix effect in ESI was evaluated in equine plasma and urine samples. The method involved the extraction of BDP and its metabolites from equine plasma and urine samples by methyl tert-butyl ether, resolution on a C(8) column with a mobile phase gradient consisting of methanol and ammonium formate (2 mmol l(-1), pH 3.4) and multiple reaction monitoring for the analytes on a triple-quadrupole mass spectrometer. The detection limit was 13 pg ml(-1) for BDP and B17P, 25 pg ml(-1) for BOH and 50 pg ml(-1) for B21P in plasma and 25 pg ml(-1) for BOH in urine. The method was successfully applied to the analysis of equine plasma and urine samples for the analytes following administration of BDP to horses by inhalation. B17P, the major and active metabolite of BDP, was detected and quantified in equine plasma up to 4 h post-administration by inhalation of a very low therapeutic dose (325 microg per horse) of BDP.

Comparative Kinetics of Metabolism of Beclomethasone Propionate Esters in Human Lung Homogenates and Plasma

The systemic availability of inhaled beclomethasone dipropionate (BDP) is the net result of the absorption of the glucocorticoid from the lower respiratory and gastrointestinal tracts, and metabolism in the lung, plasma, and other sites. The metabolism kinetics of BDP and its active metabolite, beclomethasone 17‐monopropionate (17‐BMP), in human lung 1000 × g supernatant (HLu) and human plasma (HP) at 37 °C were compared. The effect of MgCl2 and/or an NADPH‐generating system on the decomposition of BDP and 17‐BMP in HLu was also investigated. The concentrations of BDP and its metabolites were determined by HPLC with UV detection at 242 nm. Kinetics of decomposition of BDP and 17‐BMP in HLu and HP were qualitatively and quantitatively different. The decomposition of BDP in HLu involved only hydrolysis. In comparison, three reactions are involved following incubation of BDP in HP; namely, hydrolysis, transesterification, and loss of hydrogen chloride. The hydrolysis of BDP and 17‐BMP in HLu seem to be inhibited appreciably by MgCl2 with the NADPH‐generating system. Effective activation of BDP in HLu, in combination with transesterification of 17‐BMP in HP, might favor a high ratio of local antiinflammatory activity to systemic side effects following inhalation of BDP. © 2000 Wiley‐Liss, Inc. and the American Pharmaceutical Association J Pharm Sci 89: 1143–1150, 2000

Metabolism kinetics of beclomethasone propionate esters in human lung homogenates.

The purposes of this study were to characterize the kinetics of beclomethasone dipropionate (BDP) and its 17-monopropionate ester (17-BMP) in human lung 1000g supernatant (HLu) at 37 degrees C, and to analyze the interindividual variability in the metabolism of BDP in HLu. The concentrations of BDP and its metabolites were determined by HPLC with UV detection at 242 nm. Kinetics of BDP and 17-BMP decomposition were characterized by least-squares fitting of rate equations. The active metabolite 17-BMP was rapidly formed following the incubation of BDP in HLu. Kinetics of BDP and 17-BMP in HLu were nonlinear owing to product inhibition and enzyme saturation. A model taking into account the product inhibition provides a kinetic basis for understanding the in vivo behavior of BDP and its metabolites in human lung. There was approximately a 3.5-fold difference in the initial half-life of BDP in HLu observed in seven subjects. An effective activation of BDP was demonstrated in HLu through the rapid formation of 17-BMP. Kinetics of BDP and 17-BMP in HLu were well characterized by the nonlinear kinetic model. Interindividual difference in the initial half-life of BDP was due mainly to esterase metabolizing activity rather than binding affinity.

Effects of mouth wash on the removing beclomethasone dipropionate delivered by pressurized aerosol metered-dose inhaler in the mouth

Effects of mouth wash (mouth rinsing and gargling) on the removal of drug residues in both mouth and pharynx after the use of pressurized aerosol metered-dose inhaler (MDI) were studied. The concentration of beclomethasone dipropionate (BM) in mouth wash after a splay of Becotide inhaler was measured by the method using HPLC. The total amount of the removed BM was measured by a sum of the concentrations of BM in 4 or 5 times of mouth washes in the following 4 kinds of methods. In method 1, mouth wash was done with 5 times of water change after a splay of MDI on wetted mouth. In method 2, mouth wash was done with 5 times of change water on dried mouth. In method 3, mouth wash was done with 4 times of change saliva on wetted mouth. In these methods, the actual inhalation of BM was not done. In method 4, mouth wash was done with 5 times of change water after a splay and a inhalation on wetted mouth. The mouth wash procedures removed totally 47.9%, 51.1%, 31.3%, and 33.3% of a splayed amount of BM in each method, respectively. It was required for the removal of 90% of the totally recovered BM to do one time of mouth wash in method 1, two times in method 2, three times in method 3, and two times in method 4, respectively. These data suggest that the mouth wash procedure is shown to have prophylactic benefit for candidiasis induced by steroid delivered by MDI.

ジプロピオン酸ベクロメタゾン注腸液の薬剤学的検討と潰よう性大腸炎患者への適用

An enema containing beclomethasone dipropionate (BDP), with a strong anti-inflammatory action and few systemic side effects, was prepared and a pharmaceutical study of this enema was performed regarding its clinical application for the treatment of ulcerative colitis patients.The enemas were prepared by adding BDP ethanol to an aqueous solution consisting of 1% methylcellose, and this was divided into 50 ml (containing 1 mg of BDP) doses in plastic syringes. The pH, osmolarity and specific gravity of these enemas were approximately 5, 100 mOsm/kg·H20 and 1.0, respectively. The mean residual concentration of BDP in these enemas (n=6), preserved in dark under refrigeration at 4°C, declined to 93.4% after one week and 85.6% after four weeks, when compared, to the concentration determined immediately after preparation. Although the residual concentration of BDP enemas, preserved in light at 40°C, declined to 93.9% after one week and remained almost constant thereafter, the crystallization of BDP was observed the first day after preparation. Furthermore, the stability of BDP in the enemas was reduced by adjusting the pH of the enemas to 3 and 7, but it was improved by adding methyl p-hydroxybenzoate to these solutions.These BDP enemas were administered to three patients with ulcerative colitis. An improvement was seen in all three subjects regarding both the clinical symptoms and blood data (values related to inflammatory: white blood cells and C-reactive protein). In addition, the disappearance of side effects was also confirmed after administration of BDP enemas to two of the subjects who had developed such side effects as moon face and edema with prednisolone enemas.Based on these results, BDP enemas were thus suggested to be effective for of ulcerative colitis.

ベクロメタゾン噴霧の鼻こう内分布

Distribution of beclomethasone dipropionate (BD) aerosol particles in tnhe masal cavity was studied. A simulated nasal cavity made of acryl resin (Kohken Co. Ltd.) and modified by QSS (Kohken) was used for the experiment. Seven superficial hollows were made at the anterior portion of the lateral wall, the anterior, middle and posterior portions of the middle and inferior turbinates, respectively. These hollows were filled with round shaped filter paper, 5mm in diameter and 0.7mm in thickness, for the measurement of the BD concentration. The filter paper was abstracted in 5ml methanol and the solution was then measured by an automatic spectro-photometer. The concentration of BD was exgressed in absorbance since the concentration of a solution was directly proportional to its absorbance.BD was delivered by means of gas, liquid and powder. No significant difference was found among these three preparations. The highest concentration was usually found at the anterior portion of the middle turbinate in accordance with the long axis of the aerosol adaptor. In general, continuous stream of the air at 0.5, 1.0, 1.5 and 2.0l/sec from the posterior outlet of the nose little affected the amount of the deposited particles at each portion.The particles once deposited at the interior part of the nasal cavity might be again conveyed posteriorly by the inhaled air, ciliary movement and diffusion in the mucous layer. This mechanism probably supplements uneven distribution of the particles sprayed into the nasal cavity.