Concentration Of Species Research Articles

Development of oxidative stress- and ferroptosis-related prognostic signature in gastric cancer and identification of CDH19 as a novel biomarker

BackgroundFerroptosis is a unique mode of cell death that is iron-dependent and associated with oxidative stress and lipid peroxidation. Oxidative stress and ferroptosis are essential mechanisms leading to metabolic abnormalities in cells and have been popular areas in cancer research.MethodsInitially, 76 oxidative stress and ferroptosis-related genes (OFRGs) were acquired by intersecting the gene sets from oxidative stress and ferroptosis. Afterwards, optimal OFRGs were screened using PPI networks, and individuals were separated into two OFRG subtypes (K = 2). Subsequently, we successfully constructed and verified a prognostic signature comprising SLC7A2, Cadherin 19 (CDH19), and CCN1. To further uncover potential biomarkers of gastric cancer (GC), we examined the expression level of CDH19, investigated the effects of knocking down CDH19 on the biological behavior of GC cells, and explored whether CDH19 is involved in ferroptosis and oxidative stress processes.ResultsAccording to the findings, individuals in the low-risk scoring group have less infiltration of immune suppressive cells, fewer occurrences of immune escape and dysfunction, greater efficacy in chemotherapy and immunotherapy, and better survival outcomes. The qRT-PCR assay indicated that CDH19 expression was significantly higher in GC cells. Through experiments, we demonstrated that knocking down CDH19 can affect the transcription levels of ACSL4 and GPX4, increase intracellular iron ion concentration and accumulation of reactive oxygen species (ROS), and inhibit the proliferation and migration of GC cells.ConclusionWe developed an OFRG-related signature to predict the prognosis and treatment responsiveness of individuals with GC and identified CDH19 as a possible therapeutic target for GC.

Multiyear high-temporal-resolution measurements of submicron aerosols at 13 French urban sites: data processing and chemical composition

Abstract. This paper presents a first comprehensive analysis of long-term measurements of atmospheric aerosol components from aerosol chemical speciation monitor (ACSM) and multiwavelength Aethalometer (AE33) instruments collected between 2015 and 2021 at 13 (sub)urban sites as part of the French CARA (Chemical Characterization of Particles) program. The datasets contain the mass concentrations of major chemical species within submicron aerosols (PM1), namely organic aerosols (OAs), nitrate (NO3-), ammonium (NH4+), sulfate (SO42-), non-sea-salt chloride (Cl−), and equivalent black carbon (eBC). Rigorous quality control, technical validation, and environmental evaluation processes were applied, adhering to both guidance from the French Reference Laboratory for Air Quality Monitoring (LCSQA) and the Aerosol, Clouds, and Trace Gases Research Infrastructure (ACTRIS) standard operating procedures. Key findings include geographical differences in the aerosol chemical composition, seasonal variations, and diel patterns, which are influenced by meteorological conditions, anthropogenic activities, and proximity to emission sources. Overall, OA dominates PM1 at each site (43 %–60 % of total mass), showing distinct seasonality with higher concentrations (i) in winter, due to enhanced residential heating emissions, and (ii) in summer, due to increased photochemistry favoring secondary aerosol formation. NO3 is the second most important contributor to PM1 (15 %–30 %), peaking in late winter and early spring, especially in northern France, and playing a significant role during pollution episodes. SO4 (8 %–14 %) and eBC (5 %–11 %) complement the major fine-aerosol species, with their relative contributions strongly influenced by the origin of air masses and the stability of meteorological conditions, respectively. A comparison with the 3D chemical transport model (CTM) CHIMERE shows high correlations between simulations and measurements, albeit with an OA concentration underestimation of 46 %–76 %. Regional discrepancies in NO3 concentration levels emphasize the importance of these datasets with respect to validating air quality models and tailoring air pollution mitigation strategies. The datasets can be found at https://doi.org/10.5281/zenodo.13318298 (Chebaicheb et al., 2024).

Investigating environmental and geographical factors affecting iodine concentrations in Australian wheat (Triticum aestivum L.) grain

Iodine is an essential micronutrient for human nutrition, though it is found in relatively low concentrations in many important crop species. Wheat (Triticum aestivum L.) is a common staple crop worldwide, and as such could be an important source of dietary iodine due to its widespread consumption. However, little is known about iodine concentrations in wheat grain grown under rainfed field conditions, nor the impact of growing region or environment on these concentrations. Therefore, this paper had three objectives; (1) quantify the iodine concentration in a popular variety of wheat cultivated across the wheat belt of three Australian States (Western Australia, South Australia and Victoria) over two winter seasons (2) determine the influence of distance from the coast, rainfall, elevation, soil type and pH and grain yield on wheat grain iodine concentrations and (3) identify geographical areas where iodine concentrations of wheat grains are low enough that biofortification with iodine would be advantageous for human health outcomes. We sampled iodine concentrations of a single cv. Scepter at 125 sites from the winter season 2020 (65 sites) and 2021(60 sites), to investigate environmental and geographical effects on wheat grain iodine concentrations. Iodine concentrations were measured using triple quadrupole inductively coupled plasma mass spectrometer (ICP MS/MS). We found that the elevation and the region (State) of growing sites were the most significant predictors of iodine concentration, along with the interaction between rainfall and topsoil texture. However, very low concentrations of iodine (5–24 μg/kg) were detected in all samples tested, indicating that even wheat grown under advantageous environmental and geographic conditions in southern Australia would be unlikely to represent an important source of dietary iodine. This emphasises the need to consider biofortification strategies to improve iodine concentrations in Australian grown wheat to improve the dietary uptake of this essential micronutrient by human consumers.

Mathematical and Buongiorno nanofluid modelling to predict the thermal and solutal performance of magneto-bioconvective Casson nanofluid flowing in a rotatory disk

Abstract This study aims to improve how heat and mass move in systems that use viscoelastic nanofluids under magnetic fields. These systems are commonly used in industries like biotechnology, energy, and medical devices. The significance of this work lies in exploring the steady flow of magnetohydrodynamic (MHD) Casson nanofluids, incorporating the Buongiorno nanofluid model and swimming microorganisms. This research seeks to deepen the understanding of complex fluid behaviors by examining the effects of thermal radiation and chemical diffusion under thermal and solutal convective boundary conditions. The governing equations, which are inherently nonlinear due to the presence of multiple physical effects, are converted from two-dimensional partial differential equations (PDEs) to ordinary differential equations (ODEs) using a similarity transformation. A semi-analytical solution is derived using the collocation pseudo-spectral method within the MAPLE computational software. The study investigates how factors like Casson and magnetic parameters, Eckert number, Brownian motion, and thermophoresis affect the flow rate, temperature distribution, species concentration, and microorganism motility. These results are validated by comparing them with established benchmarks. The key findings reveal a pronounced oscillatory behavior in the temperature profile at higher Eckert number values, while increased Brownian motion and thermophoresis lead to greater nanoparticle dispersion near the disk surface. Higher Lewis and Peclet numbers lead to increased microorganism concentration, demonstrating stronger convective and advective effects. These insights are vital for optimizing drag force, thermal gradients, and mass transfer in engineering applications that involve rotating disks and magnetic fields.

Physicochemical properties and antimicrobial efficacy of argon cold atmospheric pressure plasma jet activated liquids – a comparative study

Cold atmospheric pressure plasma jet activated liquids (CAPJALs) have attracted considerable scientific attention due to their peculiar antimicrobial characteristics. In the current context, there is a need to compare the bactericidal activity of CAPJALs and demonstrate the specific parameters necessary to obtain greater effectiveness. This in-vitro research examines the antimicrobial activity of liquids, such as deionized water (DI-W), drinking water (DW), tap water (TW), and normal saline (NS) activated by Ar cold atmospheric pressure plasma jet (CAPJ) against multidrug-resistant (MDR) E. coli and S. aureus. The computed D- value showed that CAPJALs' bacterial inactivation efficacy followed the trend – DI-W ≈ NS > DW > TW for both the isolates. To obtain greater bactericidal effectiveness, an optimum combination of liquid activation time by CAPJ and CAPJAL – bacteria interaction time was noticed. In addition, the rate at which the physicochemical parameters (pH, electrical conductivity (EC), total dissolved solids (TDS), and concentration of reactive species (H2O2, NO3-, and NO2-)) changed within the liquid varied in different ways. It was observed that the identified gas-phase species (Ar I, Ar+, N2, N2+, O I, OH•, OH+, NO+, O2+, N2O3-, NO3-, N2O2-, etc.) would contribute to modification of liquid physicochemical property by generating liquid phase reactive species (NO3-, NO2-, H+, H2O2, ONOOH, Cl2, HOCl, etc.) via reaction cascades. These reactive species in the liquid phase, together with other physicochemical characteristics, were found to play a part in the process of bacterial inactivation. This study into the underlying mechanism of CAPJ – liquid and CAPJAL – bacteria interaction would help to determine its potential use as a disinfectant in healthcare settings. List of microorganismsE. coli: Escherichia coli; S. aureus: Staphylococcus aureus

Enhancing Electrochemical Cells Performance with Modified Ionic Liquids and Deep Eutectic Solvents using Titanium Dioxide Nanoelectrodes- Graphite

Ionic liquids (ILs) and deep eutectic solvents (DESs) have been found to be highly effective as electrolytes in TiO2 NTAs-graphite cells when combined with additives that enhance conductivity by reducing the viscosity of these liquids. The presence of CaCl2.6H2O: Acetamide DES with DI water as an additive resulted in a cell voltage of 1.31V and an internal resistance of 19 ohm. This can be attributed to the concentration and quality of the ionic species. The cells exhibited an interesting response to the AlCl3-chloroacetamide IL with dichloromethane DCM as an additive, with a cell voltage of 1.81V and an internal resistance of 5.0 ohm. Once again, this is influenced by the quality and concentration of the ionic species. Furthermore, the cells demonstrated thermal stability during the charging and discharging processes. Additionally, the surfaces of the TiO2 NTAs electrodes were examined, along with the impact of the IL and DES on these electrodes, using SEM and EDXA equipment.

Experimental Determination of the Temperature‐Dependent Broadening Effect of Water Vapour on the S‐Branch Raman Linewidths of Nitrogen

ABSTRACTThis work reports the S‐branch Raman linewidths of N2 broadened by H2O vapour at temperatures 870–1900 K determined using the picosecond time‐resolved pure rotational coherent anti‐Stokes Raman scattering (RCARS) approach. The coherent dephasing time constant of nitrogen in a binary mixture was determined from the time trace fitting of the RCARS signal. Raman linewidths of N2 for four different binary mixture compositions up to 20% H2O were obtained for each temperature and the N2‐H2O broadening coefficient was determined. The decay of nitrogen broadened by water vapour is faster than that of self‐broadened nitrogen for all temperatures leading to a higher Raman linewidth. Respectively, the S‐branch Raman linewidths of N2‐H2O deviate significantly in magnitude and slope from the Q‐branch Raman linewidth calculated by the modified energy gap (MEG) law. Therefore, taking into account the broadening effect of water molecules in nitrogen has the potential to significantly improve thermometry and species concentration determination. The determined S‐branch Raman linewidths and broadening coefficient will therefore find application in combustion and reactive flow diagnostics.

Clam Size Explains Some Variability in Paralytic Shellfish Toxin Concentrations in Butter Clams (Saxidomus gigantea) in Southeast Alaska

Harmful algal blooms (HABs) are a reoccurring threat to subsistence and recreational shellfish harvest in Southeast Alaska. Recent Tribally led monitoring programs have enhanced understanding of the environmental drivers and toxicokinetics of shellfish toxins in the region; however, there is considerable variability in shellfish toxins in some species, which cannot be easily explained by seasonal bloom dynamics. Persistent concentrations of paralytic shellfish toxins (PSTs) in homogenized butter clam samples (n > 6, Saxidomus gigantea) have been observed in several communities, and relatively large spikes in concentrations are sometimes seen without Alexandrium observations or increased toxin concentrations in other species. In order to investigate potential sources of variability in PST concentrations from this subsistence species, we assessed individual concentrations of PSTs across a size gradient of butter clams during a period of relatively stable PST concentrations. We found that increasing concentrations of PSTs were significantly associated with larger clams using a log-linear model. We then simulated six clams randomly sampled from three size distributions, and we determined large clams had an outsized probability of contributing a significant proportion of the total toxicity in a six-clam homogenized sample. While our results were obtained during a period of low HAB activity and cannot be extrapolated to periods of intoxication or rapid detoxification, they have significant ramifications for both monitoring programs as well as subsistence and recreational harvesters.

Investigating uncertainties in air quality models used in GMAP/SIJAQ 2021 field campaign: General performance of different models and ensemble results

The international field campaign, GMAP/SIJAQ 2021, was conducted in Korea from October 18th to November 25th to enhance the performance and validation of the Geostationary Environment Monitoring Spectrometer (GEMS) products algorithm and obtain a better understanding of the current air pollution status of the Korean Peninsula. Five chemical transport models (CTMs), including CMAQ, CMAQ-GIST, CAMx, WRF-Chem, and WRF GEOS-Chem, were utilized during the campaign to assist in organizing the observation plan and identifying changes in pollutant concentrations and their spatiotemporal distribution in Korea following the Korea–United States Air Quality (KORUS-AQ) 2016. In this study, we evaluated the forecasting performance, strengths, and limitations of these five CTMs and their ensemble in simulating air quality. Intensive measurement data and intercomparisons were employed to explain discrepancies between observed and simulated results. A comparison of the CTM ensemble results for PM2.5 and various gaseous pollutants between the current GMAP/SIJAQ 2021 and previous KORUS-AQ 2016 campaigns showed the R-value for the total mass PM2.5 concentration increased from 0.88 to 0.94. This improvement is related to CTM updates, including the emission inventory and better reproductions of the concentrations of gaseous species. However, the models consistently underestimated carbon monoxide (CO) concentrations, similar to the results from KORUS-AQ. This finding still suggests a further challenge that requires consideration of missing anthropogenic sources. The results of the ensemble model agreed well with the chemical composition of PM2.5 observed at the intensive monitoring station. However, for NO3− and NH4+, discrepancies were primarily due to inaccuracies in the meteorological inputs, such as precipitation, relative humidity (RH), and nighttime planetary boundary layer height (PBLH) in the CTMs. Hence, all models overestimated the concentration of elemental carbon (EC), therefore, it is necessary to revise EC emissions in the SIJAQv2 inventory, as these apply to unusual levels recorded in Seoul during the reference year of 2018.

Catalytic ammonia synthesis by supported molybdenum nitride: insight into the support effect

The influence of the support on the performance of Mo nitrides has been investigated in ammonia synthesis and decomposition. A series of Mo‐N catalysts supported on different materials, namely SiO2 (commercial, SBA‐15), Al2O3 and CeO2, were prepared. The results showed that, despite high dispersion of Mo species in all catalysts, large disparities in activity for ammonia synthesis exist. Initial rates of ~ 1208, ~ 481 and ~ 372 µmol gactive phase‐1 h‐1 are obtained over 10‐Mo‐N/SBA‐15, 10‐Mo‐N/SiO2 and 10‐Mo‐N/Al2O3 respectively. However, no catalytic activity was registered when Mo species were supported on CeO2. Furthermore, 10‐Mo‐N/Al2O3 deactivated after few hours of reaction. The surface composition was studied by means of XPS to probe the origin of the catalytic activity differences, and the results showed that a range of various oxidation states of Mo was detected depending on the support. The difference in catalytic behavior could not be solely explained by the differences in Mo‐N species concentrations. In situ EPR analysis showed that the mechanism of MoO3 nitridation could differ depending on the support, leading to the formation of different Mo‐N species. The effect of support was however not as severe in ammonia decomposition as it was the case of ammonia synthesis.

Electrical Double Layer Spillover Drives Coupled Electron- and Phase-Transfer Reactions at Electrode/Toluene/Water Three-Phase Interfaces.

A mechanism for the concerted pathway of coupled electron- and phase-transfer reactions (CEPhT) is proposed. CEPhT at three-phase interfaces formed by a solid electrode, an insulating organic solvent, and an aqueous electrolyte is driven by electric double layer (EDL) spillover, with significant electrostatic potential gradients extending a few nanometers into the insulating phase. This EDL spillover phenomenon is studied using scanning electrochemical cell microscopy to interrogate the oxidation of ferrocene in toluene to ferrocenium in water, (Fc)tol → (Fc+)aq + e-. Finite element method simulations of the electrostatic potential distribution and species concentration profiles enable the calculation of complete i-E curves that incorporate mass transport, electron transfer, phase transfer, and the EDL structure. Simulated and experimental i-E traces show good agreement in the current magnitude and the effect of the supporting electrolyte, identifying an unexpected dependence of overall reaction kinetics on the concentration of the supporting electrolyte in the aqueous phase due to EDL spillover. An interfacial toluene/water mixing region generates a unique electrochemical microenvironment where concerted electron transfer and solvent shell replacement facilitate CEPhT. Kinetic expressions for concerted and sequential CEPhT mechanisms highlight the role of this interfacial environment in controlling the rate of CEPhT. These combined experimental and simulated results are the first to support a concerted mechanism for CEPhT where (Fc)tol is transported to the interfacial mixing region at the three-phase interface, where it undergoes oxidation and phase transfer. EDL spillover can be leveraged for engineering sample geometries and electrostatic microenvironments to drive electrochemical reactivity in classically forbidden regions, e.g., insulating solvents and gases.

Robustness for biochemical networks: Step-by-step approach

We propose two step-by-step approaches to the analysis of robustness in biochemical networks. Our aim is to measure the ability of the network to exhibit step-by-step limited variations on the concentration of a species of interest at varying of the initial concentration of other species. The first approach we propose is reaction-by-reaction, i.e. we compare the states reached by nominal and perturbed networks after they have performed the same number of reactions. We provide a statistical technique allowing for estimating robustness, we implement it in a tool called spebnr (a Simple Python Environment for statistical estimation of Biochemical Network Robustness) and showcase it on three case studies: the EnvZ/OmpR osmoregulatory signaling system of Escherichia Coli, the mechanism of bacterial chemotaxis of Escherichia Coli, and enzyme activity at saturation. Then, we consider a time-by-time approach, in which networks are compared on the basis of the states they reached at the same time point, regardless of how many reactions occurred. This approach is implemented in Stark, and we apply it to the study the robustness of the EnvZ/OmpR osmoregulatory signaling system and the Lotka-Volterra equations.

Vitamin D Supplementation: Shedding Light on the Role of the Sunshine Vitamin in the Prevention and Management of Type 2 Diabetes and Its Complications

As the incidence of type 2 diabetes mellitus (T2DM) continues to increase globally, researchers are keen to investigate various interventions to mitigate its impact. Among these, vitamin D supplementation has attracted significant attention due to its influence on insulin secretion from the pancreas and insulin receptors in body cells. A substantial body of evidence indicates that vitamin D supplementation can reduce low-grade inflammation, a critical factor in developing insulin resistance. In addition, vitamin D aids in sustaining low resting concentrations of reactive oxygen species and free radicals, normalizes Ca2+ signaling, diminishes the expression of cytokines that are pro-inflammatory, and enhances the production of cytokines that are anti-inflammatory. This review discusses the effects of vitamin D on the glycemic control of individuals with T2DM and evaluates the impact of vitamin D supplementation on glycemic markers in this population. The investigation employs a comprehensive analysis of the existing literature with a special focus on recent studies published in the past decade. Based on the findings in the literature, it can be concluded that vitamin D supplementation alongside anti-diabetic medications may enhance glycemic control and potentially reduce the risk of diabetic complications. The evidence supports the notion that vitamin D supplementation can be a valuable addition to pharmacological agents for the management of T2DM, potentially enhancing glycemic control and overall health outcomes in affected individuals.

Chromium speciation from tannery wastewater using spectroscopic techniques

The toxicity and reactivity of chromium (Cr) depend on its chemical form or oxidation state which directs the significance of chromium speciation. Cr(VI) is a ‘Class A’ carcinogen whereas Cr(III)) is considered as essential for metabolism. In this work, concentrations of Cr species in different sampling sites of a tannery effluent have been spectroscopically determined. Cr(VI) was determined by UV-visible spectrophotometer through azo dye formation. Total Cr was determined by FAAS while Cr(III) was through subtraction. The Cr(IV) concentration before and after treatment was found in close proximity since the wastewater treatment process was evidently not effective at reducing the level of Cr(IV) in the waste stream (i.e., 3.34 mg/ L versus 3.15 mg/L). The Cr(VI) concentration after treatment (3.15 mg/L) is more than 31 times higher than the permissible limit of WHO (0.1 mg/L). Furthermore, the concentration of Cr(VI) in the downstream of the receiving river (0.59 mg/L) is more than 12 times higher than the upstream (0.046 mg/L) while Cr(III) in the downstream (25.73 mg/L) is more than 50 times higher than the upstream concentration (0.51 mg/L), confirming that the pollution of the river is from the tannery effluent.

Extreme electromagnetic rotation, chemical reaction, Hall and ion slip effects on weakly ionized fluid in a Riga channel

The utilization of external magnetic or electric fields, particularly through a Riga setup, markedly enhances flow dynamics by mitigating frictional forces and turbulent fluctuations, thereby facilitating superior flow management. Such improvements are especially beneficial in optimizing the operational efficiency of machinery and turbines. Our research focuses on the behaviour of a weakly ionized fluid within a porous, infinitely extended Riga channel (or electromagnetic channel) set in a rotational frame work affected by Hall and ion-slip electric fields. This model integrates the cumulative repulsions of an abruptly apply pressure gradients, electro-magnetic force, electromagnetic radiation, as well as chemical reactions. The physical configuration of the model features a stationary RHS wall as well as the LHS wall subjected to transversal vibration, establishing a complex flow environment. This circumstance is analytically modeled utilizing time dependent PDE, with the Laplace transform method applied to achieve a closed-format resolution for the course controlling equations. Through detailed graphical and tabular data, the investigations explored the impacts of assorted pivotal parameters on the model's flow traits and quantities. Our results indicate that an upswing in the modified Hartmann number significantly enhances fluids flow in the conduit, with the most important resultant flow showing marked improvement as Hall and ion-slip parameters amplify, and secondly the resultant flow diminishing chemical reaction parameter. Additionally, species concentration lowers with higher Schmidt numbers and chemical reaction rates, while an expanded modified Hartmann number correlate with enhanced shear stress near the conduit wall. Moreover, an elevation in the radiating parameter reduces the rate of temperature transport at the vibrating wall, whereas this at the stationary wall improves. This study has profound implications across several fields, notably in fusion energy research, spacecraft propulsion systems, satellite operations, aerospace engineering, and advanced manufacturing technologies.

ACEIC: a comprehensive anthropogenic chlorine emission inventory for China

Abstract. Chlorine species play a crucial role as precursors to Cl radicals, which can significantly impact the atmospheric oxidation capacity and influence the levels of trace gases related to climate and air quality. Several studies have established a chlorine emission inventory in China in recent years, but the emission remains uncertain and requires further investigation. The Anthropogenic Chlorine Emission Inventory for China (ACEIC) was the first chlorine emission inventory for China based on local data developed in our previous study, which only includes the emissions from coal combustion and waste incineration. In this study, we updated this inventory to include data for a more recent year (2019) and expanded the range of species considered (HCl, fine particulate Cl−, Cl2, and hypochlorous acid (HOCl)) and the number of anthropogenic sources (41 specific sources). Compared with previous studies, this updated inventory considered more anthropogenic sources, used more localized emission factors, and adopted more refined estimation methods. The total emissions of HCl, fine particulate Cl−, Cl2, and HOCl in mainland China for the year 2019 were estimated to be 361 (−18 % to 27 %), 174 (−27 % to 59 %), 18 (−10 % to 15 %), and 79 (−12 % to 18 %) Gg, respectively. To facilitate analysis, we aggregated the chlorine emissions from various sources into five economic sectors: power, industry, residential, agriculture, and biomass burning. HCl emissions were primarily derived from the industry (43 %), biomass burning (38 %), and residential (13 %) sectors. The biomass burning and industry sectors accounted for 74 % and 19 % of the fine particulate Cl− emissions, respectively. Residential and industry sectors contributed 61 % and 29 % of the total Cl2 emissions. HOCl emissions were predominantly from the residential sector, constituting 90 % of the total emissions. Notably, the usage of chlorine-containing disinfectants was identified as the most significant source of Cl2 and HOCl emissions in the residential sector. Geographically, regions with high HCl and fine particulate Cl− emissions were found in the North China Plain, northeastern China, central China, and the Yangtze River Delta, whereas the Pearl River Delta, Yangtze River Delta, and Beijing–Tianjin–Hebei regions exhibited elevated levels of Cl2 and HOCl emissions. Regarding monthly variation, emissions of HCl and fine particulate Cl− were higher during early spring (February to April) and winter (December to January) due to intensified agricultural activities, while Cl2 and HOCl emissions were higher in the summer months due to increased demand for water disinfection. We incorporated this emission inventory into the chemical transport model and found the simulated concentrations of chlorine species agreed reasonably well with the observations, which suggested the relatively faithful estimations of their emissions. This updated inventory contributes to a better understanding of anthropogenic sources of chlorine species and can aid in the formulation of emission control strategies to mitigate secondary pollution in China.

Maternal total sleep deprivation causes oxidative stress and mitochondrial dysfunction in oocytes associated with fertility decline in mice.

Previous studies have shown sleep deprivation is increasingly reported as one of the causes of female infertility. However, how and by what relevant mechanisms it affects female fertility remains unclear. In this study, female mice underwent 72 hours of total sleep deprivation (TSD) caused by rotating wheel or 2 different controls: a stationary wheel, or forced movement at night. Even though, there was no significant difference in the number of eggs ovulated by the TSD mice compared to the control groups. Overall levels of estrogen and FSH were lower throughout the estrus cycle. A total of 42 genes showed significant differential expression in GV oocytes after TSD by RNA sequencing (RNA-Seq). These included genes were enriched in gene ontology terms of mitochondrial protein complex, oxidoreductase activity, cell division, cell cycle G1/S phase transition, as well as others. The increased concentrations of reactive oxygen species (ROS) in germinal vesicle (GV) and metaphase II (MII) oocytes from TSD mice were observed, which might be induced by impaired mitochondrial function caused by TSD. The GV oocytes displayed increased mitochondrial DNA (mtDNA) copy number and a significant transient increase in inner mitochondrial membrane potential (Δψm) from the TSD mice probably due to compensatory effect. In contrast, MII oocytes in the TSD group showed a decrease in the mtDNA copy number and a lower Δψm compared with the controls. Furthermore, abnormal distribution of mitochondria in the GV and MII oocytes was also observed in TSD mice, suggesting mitochondrial dysfunction. In addition, abnormal spindle and abnormal arrangement of chromosomes in MII oocytes were markedly increased in the TSD mice compared with the control mice. In conclusion, our results suggest that TSD significantly alters the oocyte transcriptome, contributing to oxidative stress and disrupted mitochondrial function, which then resulted in oocyte defects and impaired early embryo development in female mice.

Effects of pulse rise time and pulse width on discharge mode transition of SDBD plasma under repetitive pulses

Abstract Affected by environmental states and power supply parameters, the discharge mode of surface dielectric barrier discharge plasma may gradually transfer from O3 mode to NOx mode, resulting in various gas-phase species for different applications. Despite the intensive study of attempts to control this discharge mode transition by changing discharge conditions and power excitations in recent years, the effects of the pulse rise time and the pulse width on the discharge mode transition have not been discussed. In the present study, a surface dielectric barrier discharge was excited by repetitive pulses with different pulse rise times or pulse widths, and the time-varying concentrations of key long-lived species (O3 and NO2) were quantified. The results demonstrated that it was possible to modulate the discharge mode by adjusting pulse rise time/pulse width. The quenching of O3 was observed to occur at a faster rate and the mode transition was noted to occur at an earlier point in time as the pulse rise time decreased from 225 ns to 125 ns and the pulse width increased from 0.5 μs to 4 μs. The employment of a zero-dimensional model for the analysis of plasma chemical kinetics revealed that the reduction in pulse rise time and the prolongation of pulse width resulted in an increase in the mean vibrational energy of N2(v) and a more rapid electrode temperature rise caused by plasma heating. The former enhanced the generation of NO, while the latter accelerated the thermal decomposition of O3, thereby promoting the speed of mode transition.

Assessment of heavy metal concentration in pelagic fish species and associated health risks along the Kanyakumari coast, India – a baseline study

ABSTRACT This research examines heavy metal concentration in fish from the Kanyakumari coast of India, emphasising its ecological consequences and possible health hazards for consumers. The study investigates the levels of several heavy metals such as zinc, manganese, iron, cadmium, copper, chromium, cobalt, lead, and nickel in different organs of multiple pelagic fish species obtained from the Kanyakumari fish landing site. Concentrations of heavy metals exhibit considerable variation among different fish organs and species, with distinct patterns identified for each metal. Muscle tissue often demonstrates reduced amounts of heavy metals in comparison to other organs. Except Zn and Fe, other heavy metals in fish muscle were above the acceptable limits set by health organisations. Cadmium was found to be 36-fold higher than the permissible limit, followed by nickel (30.4) and lead (7.6). Copper, nickel, and cadmium provide possible health hazards according to the Target Hazard Quotient (THQ). Lead and cadmium exhibit Excessive Lifetime Cancer Risk (ELCR) markedly above tolerable thresholds. Large predatory fish, such as Thunnus thynnus, exhibit elevated levels of contaminants such as cadmium. Environmental conditions, aquatic habitat, and dietary intake affect metal build-up in fish. The research employs multiple analytical methods and statistical methods, such as Atomic Absorption Spectrophotometry, correlation and Principal Component Analysis, to evaluate heavy metal concentrations and their interrelations. The study underscores the critical necessity for monitoring and mitigation techniques to combat heavy metal pollution in coastal waters and its possible effects on human health through fish intake.

Efficacy of neutral electrolyzed water vs. common topical antiseptics in the healing of full‑thickness burn: Preclinical trial in a mouse model.

Burn injuries impose challenges such as infection risk, pain management, fluid loss, electrolyte imbalance and psychological and emotional impact, on healthcare professionals, requiring effective treatments to enhance wound healing. The present study evaluated the efficacy superoxidized electrolyzed solution (SES), with low (SES-low) or high (SES-high) concentrations of active species, alone or in combination with a formulation in gel (G), in comparison with commonly prescribed treatments for burn injury, including nitrofurazone (NF) and silver sulfadiazine (S); normal saline was used as placebo (PI). A scald burn model was established in BALB/c mice. Measurements of the burned area and histological parameters such as inflammatory infiltration state, epithelial regeneration and collagen fibers were evaluated on days 3, 6, 9, 18 and 32 to assess healing score and status. All treatments achieved wound closure at day 32; histopathological parameters indicated that SES-low and SES-low + G performed better than the Pl and S groups (P<0.05). All treatments showed a lower count of inflammatory cells compared with S (P<0.05); for collagen deposition and orientation, SES-low + G showed a more uniform horizontal orientation compared with Pl, SES-high + G, NF and S groups (P<0.05). SES-Low was the most effective substance to induce favorable and organized healing, while S was the worst, inducing disorganized closure of the wound due to a pro-inflammatory effect.