Concentration Gradient Research Articles

A Cautionary Perspective on Hydrogel-Induced Concentration Gradient Generation for Studying Chemotaxis.

The achievement of consistent and static chemical gradients is critically important in the study of diffusion and chemotaxis at the micro- and nanoscales. In this context, a number of groups have reported on hydrogel-based systems for generating concentration gradients. Here, we analyze the behavior of agarose and gelatin-based hydrogels in hybridization chambers of different heights. Our focus is on the issues that are caused by the presence of robust bulk fluid flows in such systems due to the solutes present in the hydrogel and/or the surrounding fluid. We describe the key insights derived from these experiments, offering practical guidelines for establishing gradients using hydrogel-based systems and make the community aware of different variables that can make the experiments nonreproducible and prone to misinterpretations.

Facile Synthesis of Hemin Derivatives with Modulated Aggregation Behaviour and Enhanced Nitric‐Oxide Scavenging Properties as New Therapeutics for Breast Cancer

Nitric oxide (•NO) plays various pathophysiological roles in breast cancer, significantly influencing the migration of tumour cells through concentration gradients. Therefore, modulating •NO levels via selective scavenging presents a promising approach to treating aggressive •NO‐dependent cancers, such as triple‐negative breast cancer (TNBC). Hemin emerges as a potential scavenger of •NO; however, its metalloporphyrin molecules tend to aggregate in physiological solutions, which limits its biomedical applications. To address this, a modification strategy is employed to minimize aggregation and protect against physiological oxidative degradation while preserving •NO‐scavenging properties. This is achieved through a simple chemical transformation that involves hemin conjugation to aromatic residues, tyrosine, and tyramine via carbodiimide reactions. These derivatives exhibit altered electronic properties and oxidation potential compared to hemin, alongside reduced aggregation tendencies and retained •NO‐binding affinity in aqueous solutions. Furthermore, depending on the type of hemin derivative, there is an associated inhibition of TNBC cell migration. These model hemin compounds demonstrate varying •NO‐binding affinities and resistance levels to oxidative degradation and aggregation, offering insights into the design of •NO‐scavenging molecules with enhanced properties for cancer treatment.

The effect of sulfuration reaction rates with sulphur concentration gradient dependence on the growth pattern and morphological evolution of MoS2 in laminar flow.

Sulfuration reactions dominate the synthesis of transition-metal dichalcogenides via chemical vapor deposition. A neglected critical issue is the evolution of crystal domain morphology and growth models caused by boundary layer development. In this study, we propose two growth models within a laminar flow field to investigate the kinetic mechanism of uniformly grown MoS2. We used supercritical fluid pre-deposition to obtain a well-distributed and low-crystallinity Mo precursor on the surface of a substrate to avoid non-stoichiometric supply in sulfuration. The development of the boundary layer was suppressed through mainstream force by adjusting the substrate slope angle. For growth within the underdeveloped laminar boundary layer, monolayer MoS2 with a size of 50 μm uniformly distributed on the full substrate with R = 85% (relative change in boundary layer thickness). Moreover, the growth constrained by surface chemical reactions tended to promote spatially uniform growth. However, within the fully developed laminar flow, the crystal domains preferentially grew vertically, which was attributed to the excessive crystal growth rate (g). Our results provide new insights into the controllable preparation of two-dimensional materials.

Microfluidic biosensors: exploring various applications through diverse bonding methods

Abstract Biological sensors are widely applied in agriculture, biomedicine, food, healthcare, environmental monitoring, water quality, forensics, drug development, etc.. Particularly the utilization of microfluidic technology has become prevalent in the development and manufacturing of biosensors for miniaturization, automation, and integration. Microfluidic biosensors have distinct advantages, including enhanced diffusive timescales, controlled concentration gradients, high throughput, high precision fluid manipulation, stable reaction environments and high sensitivity. From the perspective of sensor fabrication, bonding remains the crucial pathway in the pursuit of integrating microfluidic technology with biosensor chips, while various bonding methods are employed across different application domains. This paper delves into the classification, progress, and challenges associated with these bonding methods corresponding with various microfluidic biosensors in diverse applications. The review presented herein highlights the latest advancements in microfluidic biosensors based on diverse bonding methods, underscoring their significant application prospects and developmental potential within these fields.

Holey Sheets Enhance the Packing and Osmotic Energy Harvesting of Graphene Oxide Membranes.

Layered membranes assembled from two-dimensional (2D) building blocks such as graphene oxide (GO) are of significant interest in desalination and osmotic power generation because of their ability to selectively transport ions through interconnected 2D nanochannels between stacked layers. However, architectural defects in the final assembled membranes (e.g., wrinkles, voids, and folded layers), which are hard to avoid due to mechanical compliant issues of the sheets during the membrane assembly, disrupt the ionic channel pathways and degrade the stacking geometry of the sheets. This leads to degraded ionic transport performance and the overall structural integrity. In this study, we demonstrate that introducing in-plane nanopores on GO sheets is an effective way to suppress the formation of such architectural imperfections, leading to a more homogeneous membrane. Stacking of porous GO sheets becomes significantly more compact, as the presence of nanopores makes the sheets mechanically softer and more compliant. The resulting membranes exhibit ideal lamellar microstructures with well-aligned and uniform nanochannel pathways. The well-defined nanochannels afford excellent ionic conductivity with an effective transport pathway, resulting in fast, selective ion transport. When applied as a nanofluidic membrane in an osmotic power generation system, the holey GO membrane exhibits higher osmotic power density (13.15 W m-2) and conversion efficiency (46.6%) than the pristine GO membrane under a KCl concentration gradient of 1000-fold.

Blocking Aδ- and C-fiber neural transmission by sub-kilohertz peripheral nerve stimulation

IntroductionWe recently showed that sub-kilohertz electrical stimulation of the afferent somata in the dorsal root ganglia (DRG) reversibly blocks afferent transmission. Here, we further investigated whether similar conduction block can be achieved by stimulating the nerve trunk with electrical peripheral nerve stimulation (ePNS).MethodsWe explored the mechanisms and parameters of conduction block by ePNS via ex vivo single-fiber recordings from two somatic (sciatic and saphenous) and one autonomic (vagal) nerves harvested from mice. Action potentials were evoked on one end of the nerve and recorded on the other end from teased nerve filaments, i.e., single-fiber recordings. ePNS was delivered in the middle of the nerve trunk using a glass suction electrode at frequencies of 5, 10, 50, 100, 500, and 1000 Hz.ResultsSuprathreshold ePNS reversibly blocks axonal neural transmission of both thinly myelinated Aδ-fiber axons and unmyelinated C-fiber axons. ePNS leads to a progressive decrease in conduction velocity (CV) until transmission blockage, suggesting activity-dependent conduction slowing. The blocking efficiency is dependent on the axonal conduction velocity, with Aδ-fibers efficiently blocked by 50–1000 Hz stimulation and C-fibers blocked by 10–50 Hz. The corresponding NEURON simulation of action potential transmission indicates that the disrupted transmembrane sodium and potassium concentration gradients underly the transmission block by the ePNS.DiscussionThe current study provides direct evidence of reversible Aδ- and C-fiber transmission blockage by low-frequency (<100 Hz) electrical stimulation of the nerve trunk, a previously overlooked mechanism that can be harnessed to enhance the therapeutic effect of ePNS in treating neurological disorders.

Median effective dosage of midazolam oral solution for preschool children in preoperative sedation

AbstractThis study aimed to detect median effective dosage (ED50) of midazolam oral solution (MOS) for preschool children in preoperative sedation. Thirty children (3–6 years old, with a body mass index (BMI) of 18–28 kg/m2, American Society of Anesthesiologists status (ASA) I‐II) scheduled for the hidden penis correction surgery under general anesthesia were selected. The effective dosage of MOS for preschool children in preoperative sedation was measured by sequential method. The initial dose was set at 0.5 mg/kg, with a concentration gradient of 0.1 mg/kg. Sedation was deemed successful if the patients’ Ramsay sedation scores were ≥4 and Frankl treatment compliance rating scale was ≥3, without any grade III or higher adverse events during anesthesia. If these criteria were met, the dosage for the next patient was reduced by one gradient based on the last patient's dosage, otherwise, the dosage for the next patient was increased by one gradient. This process was repeated until the 7th inflection point from unsuccessful to successful sedation was reached, at which point the trial was terminated. Probit regression analysis was used to calculate the ED50, 95% effective doses (ED95) and 95% confidence interval (CI) of MOS. Adverse reactions such as bradycardia, nausea, vomiting, and blurred vision were recorded during sedation. This study revealed that the ED50 and ED95 of MOS for preschool children preoperative sedation are 0.627 mg/kg (95% CI 0.582–0.669 mg/kg) and 0.795 mg/kg (95% CI 0.712–1.211 mg/kg), respectively, providing a reference for the administration of MOS in this population.

Variability of the surface boundary layer of reef-building coral species

AbstractThe coral-seawater interface is an important, highly dynamic microenvironment for reef-building corals. Also known as the concentration boundary layer (CBL), it is a thin layer of seawater bordering the coral surface that dictates the biochemical exchange between the coral colony and bulk seawater. The CBL is thus a key feature that modulates coral metabolism. However, CBL variation among small-polyped coral species remains largely unknown. Therefore, we recorded over 100 profiles of dissolved O2 concentration using microsensors to characterize CBL traits (thickness, surface O2 concentration, and flux) of three small-polyped branching coral species, Acropora cytherea, Pocillopora verrucosa, and Porites cylindrica. Measurements were conducted during light and darkness combined with low or moderate water flow (2 and 6 cm s−1). We found that CBL traits differed among species. CBL thickness was lowest in A. cytherea, while P. verrucosa showed the largest depletion of surface O2 in dark and highest dark flux. In addition, we found that O2 concentration gradients in the CBL occurred with three main profile shapes: diffusive, S-shaped, and complex. While diffusive profiles were the most common profile type, S-shaped and complex profiles were more frequent in P. verrucosa and P. cylindrica, respectively, and prevailed under low flow. Furthermore, profile types differed in CBL thickness and flux. Finally, low flow thickened CBLs, enhanced changes in surface O2 concentration, and reduced flux, compared to moderate flow. Overall, our findings reveal CBL variability among small-polyped branching corals and help understand CBL dynamics in response to changes in light and water flow conditions.

Areca nut-induced AREG promote oral epithelial cell proliferation, migration, and EMT.

To analyze the biological effect and mechanism of areca nut extract (ANE) on human oral keratinocyte (HOK) cells. The effect of gradient concentration of ANE on the proliferation activity of HOK cells was analyzed by cell counting kit-8 (CCK-8) assays. The differentially expressed genes between the ANE group and control group HOK cells were analyzed by second-generation transcriptome sequencing. Real-time PCR and western blot were, respectively, used to analyze the expression of AREG gene and protein in HOK cells. After AREG gene overexpression or knockdown, the proliferation, migration, and expression of proteins related to epithelial-mesenchymal transformation (EMT), MAPK signal pathway in HOK cells were, respectively, detected by CCK-8, wound healing, transwell, and western blot assays. ANE (500 μg/mL) promoted the proliferation and migration of HOK cells, ANE (2 mg/mL) promoted the EMT of HOK cells, and ANE (50 mg/mL) inhibited the proliferation of HOK cells. AREG knockdown inhibited ANE-induced proliferation and migration of HOK cells, while AREG overexpression promoted the proliferation and migration of HOK cells. Western blot assay showed that ANE activated MAPK signal pathway by upregulating AREG protein in HOK cells. ANE promoted HOK cell proliferation, migration, and EMT by mediating AREG-MAPK signaling pathway.

Inhibit ammonia volatilization from agriculture and livestock by air plasma-activated water

Ammonia volatilization in agriculture and livestock is a considerable cause of air pollution and a significant way of N loss. In this study, we propose a method of using air plasma-activated water (PAW) to inhibit ammonia volatilization from agriculture and livestock and report the inhibitory effect under different discharge times and concentration gradients. PAW was generated through needle–water discharge, while ammonia waters with different concentrations served as simplified models for ammonia release. The compositions of the gas/liquid products of the PAW and those after mixing with ammonia water were detected and analyzed. It was found that the PAW could effectively inhibit the NH3 volatilization from ammonia water over a large range of conditions, however, NH3 volatilization promotion could also happen in some cases. The inhibition rate (IR) generally increased with the longer discharge time of the PAW and decreased with the higher ammonia water concentration. As the discharge time increased, the PAW became more acidic and had more active N components, converting more volatile NH3 to NH4 + when mixed with ammonia water. Finally, a relationship model was developed between the IR and pH of the mixture. The IR basically decreased with the increase of the mixture pH, and reached ∼100% when a PAW with a discharge time of 7.5 min or 10 min was mixed with ammonia water with a mass fraction of 0.15%, or PAW of 10 min mixed with 0.25% ammonia water in this study, with the mixture pH lower than 8. The basic chemical process and possible reaction mechanisms were discussed. The proposed method not only effectively reduces ammonia volatilization but also adds more N elements in the form of NO3 − and NH4 +, which further improves fertility.

Harnessing elastic instabilities for enhanced mixing and reaction kinetics in porous media

Turbulent flows have been used for millennia to mix solutes; a familiar example is stirring cream into coffee. However, many energy, environmental, and industrial processes rely on the mixing of solutes in porous media where confinement suppresses inertial turbulence. As a result, mixing is drastically hindered, requiring fluid to permeate long distances for appreciable mixing and introducing additional steps to drive mixing that can be expensive and environmentally harmful. Here, we demonstrate that this limitation can be overcome just by adding dilute amounts of flexible polymers to the fluid. Flow-driven stretching of the polymers generates an elastic instability, driving turbulent-like chaotic flow fluctuations, despite the pore-scale confinement that prohibits typical inertial turbulence. Using in situ imaging, we show that these fluctuations stretch and fold the fluid within the pores along thin layers ("lamellae") characterized by sharp solute concentration gradients, driving mixing by diffusion in the pores. This process results in a [Formula: see text] reduction in the required mixing length, a [Formula: see text] increase in solute transverse dispersivity, and can be harnessed to increase the rate at which chemical compounds react by [Formula: see text]-enhancements that we rationalize using turbulence-inspired modeling of the underlying transport processes. Our work thereby establishes a simple, robust, versatile, and predictive way to mix solutes in porous media, with potential applications ranging from large-scale chemical production to environmental remediation.

Screening, Synthesis, and Characterization of a More Rapidly Dissolving Celecoxib Crystal Form.

The prevalence of poor solubility in active pharmaceutical ingredients (APIs) such as celecoxib (CEL) is a major bottleneck in the pharmaceutical industry, leading to a low concentration gradient, poor passive diffusion, and in vivo failure. This study presents the synthesis and characterization of a new cocrystal of the API CEL. CEL is a nonsteroidal anti-inflammatory drug used for the treatment of osteoarthritis and rheumatoid arthritis. Computational screening was completed for CEL against a large library of generally recognized as safe (GRAS) coformers, based on molecular complementarity and hydrogen bond propensity (HBP). The generated list of 17 coformers with a likelihood for cocrystallization with CEL were experimentally screened using four techniques: liquid-assisted grinding (LAG), solvent evaporation (SE), gas antisolvent crystallization (GAS), and supercritical enhanced atomization (SEA). One new crystalline form was isolated, employing the liquid coformer N-ethylacetamide (NEA). This novel form, celecoxib-di-N-ethylacetamide (CEL·2NEA), was characterized by a variety of different techniques. The crystal structure was determined through single-crystal X-ray diffraction. Both NEA molecules are evolved from the crystal structure at a desolvation temperature of approximately 65 °C. The CEL·2NEA cocrystal exhibited a dissolution rate, with more than a twofold improvement in comparison to as-received CEL after only 15 min.

On The Determination Of Conditional Statistics Along Gradient Trajectories At The Turbulent/Non-Turbulent Interface Of Jet Flows.

Conditional sampling and averaging are valuable techniques for discerning and quantifying notable regions within turbulent flows. These methods have been particularly prevalent in experimental and numerical investigations of turbulent shear flows. Conditional statistics effectively analyze the dynamics and characteristics of turbulent flows, offering insights into transitional behaviors and distinct features within these regimes. This approach is instrumental in studying turbulent shear flows, such as jets or mixing layers, where a well-defined zone separates the turbulent core from the non-turbulent surrounding fluid. This zone, known as the Turbulent/Non-Turbulent Interface (TNTI), plays a crucial role in various phenomenological changes, including the transfer of mass, momentum, and scalar fluxes. While statistics in jet flows are often reported along the radial direction for a given downstream position, this method can obscure the underlying physical processes. Scalar dissipation rate, transport, or turbulent kinetic energy involve velocity or concentration gradients at the flow interface. To date, the impact of sampling direction on conditional statistics within jet flows has not yet been thoroughly discussed. This study focuses on determining gradient trajectories at the interface of turbulent flows. Gradient trajectories have been used to explore structures in turbulent flows, proving effective in analyzing homogeneous shear turbulence. This study introduces a methodology for sampling conditional data by computing gradient trajectories intersecting the TNTI. The primary objective is to verify whether sampling statistics along the gradient of scalar concentration provide a more detailed understanding of the processes occurring near the TNTI. The methodology involves computing a field of gradient trajectories from concentration fields obtained through Planar Laser-Induced Fluorescence (PLIF) in a N2/N2 jet with Re = 2900. Conditional statistics at the TNTI of a jet flow along the gradient trajectory for a given downstream position are calculated and reported. The paper aims to compare conditional statistics along gradient trajectories with those obtained along radial and normal directions at the TNTI. It is expected that gradient trajectory statistics align more closely with normal direction statistics near the interface and diverge as it gets into the jet or coflow fluid.

Study on Chalcopyrite Dissolution Mechanism and Bioleaching Community Behavior Based on Pulp Concentration Gradient at 6 °C

Low-temperature bioleaching is relevant to the recovery of metals in alpine mines, but its development has been constrained by low bioleaching rates at high pulp concentrations. To this end, the bioleaching effect of the microbial community after the domestication of pulp concentration at 6 °C was studied. Domestication improved the bioleaching rate of copper. Environmental scanning electron microscopy (ESEM), X-ray diffraction (XRD), and electrochemical measurements revealed that the domestication process aggravated the corrosion of the chalcopyrite surface by accelerating its dissolution reaction. High-throughput sequencing technology indicated that Acidithiobacillus spp., Leptospirillum spp., and Acidiphilium spp. were the major lineages of the domesticated microbial community. The analysis of the microbial community revealed that domestication changed the microbial structure, enhancing the adaptability of the microbial community to pulp concentrations and acidic conditions. This study uncovered the mechanism by which domestication enhanced the bioleaching efficiency of the microbial community at low temperatures.

Se‐Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells with High Open‐Circuit Voltages

Antimony selenosulfide (Sb2(S,Se)3), featuring large absorption coefficient, excellent crystal structure stability, benign non‐toxic characteristic, outstanding humidity and ultraviolet tolerability, has recently attracted enormous attention and research interest regarding its photoelectric conversion properties. However, the open‐circuit voltage (Voc) for Sb2(S,Se)3‐based photovoltaic devices is relatively low, especially for the device with a high power conversion efficiency (η). Herein, an innovative Se‐elemental concentration gradient regulation strategy has been exploited to produce high‐quality Sb2(S,Se)3 films on TiO2/CdS substrates through a thioacetamide(TA)‐synergistic dual‐sulfur source hydrothermal‐processed method. The Se‐elemental gradient distribution produces a favorable energy band structure, which suppresses the energy level barriers for hole transport and enhances the driving force for electron transport in Sb2(S,Se)3 film. This facilitates efficient charge transport/separation of photogenerated carriers and boosts significantly the Voc of Sb2(S,Se)3 photovoltaic devices. The champion TA‐Sb2(S,Se)3 planar heterojunction (PHJ) solar cell displays an considerable η of 9.28% accompanied by an exciting Voc rising to 0.70 V that is currently the highest among Sb2(S,Se)3‐based solar cells with efficiencies exceeding 9.0%. This research is anticipated to contribute to the preparation of high‐quality Sb2(S,Se)3 thin film and the achievement of efficient inorganic Sb2(S,Se)3 PHJ photovoltaic device.

Study on Chalcopyrite Dissolution Mechanism and Bioleaching Community Behavior Based on Pulp Concentration Gradient at 6 °C

Low-temperature bioleaching is relevant to the recovery of metals in alpine mines, but its development has been constrained by low bioleaching rates at high pulp concentrations. To this end, the bioleaching effect of the microbial community after the domestication of pulp concentration at 6 °C was studied. Domestication improved the bioleaching rate of copper. Environmental scanning electron microscopy (ESEM), X-ray diffraction (XRD), and electrochemical measurements revealed that the domestication process aggravated the corrosion of the chalcopyrite surface by accelerating its dissolution reaction. High-throughput sequencing technology indicated that Acidithiobacillus spp., Leptospirillum spp., and Acidiphilium spp. were the major lineages of the domesticated microbial community. The analysis of the microbial community revealed that domestication changed the microbial structure, enhancing the adaptability of the microbial community to pulp concentrations and acidic conditions. This study uncovered the mechanism by which domestication enhanced the bioleaching efficiency of the microbial community at low temperatures.

Se‐Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells with High Open‐Circuit Voltages

Antimony selenosulfide (Sb2(S,Se)3), featuring large absorption coefficient, excellent crystal structure stability, benign non‐toxic characteristic, outstanding humidity and ultraviolet tolerability, has recently attracted enormous attention and research interest regarding its photoelectric conversion properties. However, the open‐circuit voltage (Voc) for Sb2(S,Se)3‐based photovoltaic devices is relatively low, especially for the device with a high power conversion efficiency (η). Herein, an innovative Se‐elemental concentration gradient regulation strategy has been exploited to produce high‐quality Sb2(S,Se)3 films on TiO2/CdS substrates through a thioacetamide(TA)‐synergistic dual‐sulfur source hydrothermal‐processed method. The Se‐elemental gradient distribution produces a favorable energy band structure, which suppresses the energy level barriers for hole transport and enhances the driving force for electron transport in Sb2(S,Se)3 film. This facilitates efficient charge transport/separation of photogenerated carriers and boosts significantly the Voc of Sb2(S,Se)3 photovoltaic devices. The champion TA‐Sb2(S,Se)3 planar heterojunction (PHJ) solar cell displays an considerable η of 9.28% accompanied by an exciting Voc rising to 0.70 V that is currently the highest among Sb2(S,Se)3‐based solar cells with efficiencies exceeding 9.0%. This research is anticipated to contribute to the preparation of high‐quality Sb2(S,Se)3 thin film and the achievement of efficient inorganic Sb2(S,Se)3 PHJ photovoltaic device.

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells with High Open-Circuit Voltages.

Antimony selenosulfide (Sb2(S,Se)3), featuring large absorption coefficient, excellent crystal structure stability, benign non-toxic characteristic, outstanding humidity and ultraviolet tolerability, has recently attracted enormous attention and research interest regarding its photoelectric conversion properties. However, the open-circuit voltage (Voc) for Sb2(S,Se)3-based photovoltaic devices is relatively low, especially for the device with a high power conversion efficiency (η). Herein, an innovative Se-elemental concentration gradient regulation strategy has been exploited to produce high-quality Sb2(S,Se)3 films on TiO2/CdS substrates through a thioacetamide(TA)-synergistic dual-sulfur source hydrothermal-processed method. The Se-elemental gradient distribution produces a favorable energy band structure, which suppresses the energy level barriers for hole transport and enhances the driving force for electron transport in Sb2(S,Se)3 film. This facilitates efficient charge transport/separation of photogenerated carriers and boosts significantly the Voc of Sb2(S,Se)3 photovoltaic devices. The champion TA-Sb2(S,Se)3 planar heterojunction (PHJ) solar cell displays an considerable η of 9.28% accompanied by an excitingVoc rising to 0.70 V that is currently the highest among Sb2(S,Se)3-based solar cells with efficiencies exceeding 9.0%. This research is anticipated to contribute to the preparation of high-quality Sb2(S,Se)3 thin film and the achievement of efficient inorganic Sb2(S,Se)3 PHJ photovoltaic device.

Optimising miniaturised hydrocyclones for enhanced separation of microplastics

Microplastics, particularly those in the 5–20µm range, pose substantial risks in aquatic environments, yet effective removal techniques are limited. This study assesses two critical geometric parameters of a 10 mm mini-hydrocyclone: inlet radius and insertion angle. Along with the inlet velocity, they are optimised collectively to enhance the MPs’ removal. Computational Fluid Dynamics (CFD) simulations using the Mixture model and Reynolds stress model were employed to track the particle–water–air interactions, revealing the flow dynamics and absence of an air core. The Response Surface Methodology (RSM) using a Box-Behnken design of experiments was adopted to assess the impact of the geometric and operational parameters and determine the optimal design. Recovery efficiency, concentration efficiency, and split rate were recorded during experiments and compared with CFD results, showing a good agreement between experiments and CFD simulations. The resulting novel design achieved an 88.53% MPs recovery and a concentration efficiency of 1.83, which represents an obvious improvement over the commercial design’s MPs recovery efficiency of 79.97% and concentration efficiency of 1.68. Simulations reveal that the novel design shortens the path for MPs through the forced turbulence region and modifies the velocity and turbulence fields, enhancing the concentration gradient of MPs within the mini-hydrocyclone’s chamber. Moreover, the novel design exhibits a more robust response to inlet velocity variations, a crucial advantage for its application in arrays. Experiments further confirm that a matrix composed of 10 novel mini-hydrocyclones achieves 10 percentage points higher recovery efficiency than the matrix with 10 commercial mini-hydrocyclones. These findings mark a significant step towards effective MP removal, addressing a critical environmental issue.

The Properties of the Physical Parameters in the Triple Diffusive Fluid Flow Model

The existence of more than one diffusive component in fluid mixtures is observed in these situations: underground water flow, the mechanism of acid rain, the existence of contaminant in some certain mixture, etc. These diffusive components are occurred with the single temperature gradient (since all of the elements are dissolved into the same mixture) and 2 types of concentration gradients (since the dual diffusive components are dissolved in the same mixture). Besides, many industrial and engineering processes are utilizing the concept of convective fluid flow especially over a shrinking sheet. Therefore, a mathematical model for triple-diffusive flow over a nonlinear compressing sheet has been developed in this paper, and subjected to the Soret-Dufour effects. The model comprises of five initial equations namely continuity, momentum, energy, concentration of component 1 and concentration of component 2 equations, together with boundary conditions. These initial equations are expressed as partial differential equations. However, the finalized equations are in the form of ordinary differential equations. Later, the bvp4c programme provided by the Matlab Software is used to solve the ordinary differential equations and the boundary conditions. Three distinct values of each governing parameter are fixed into the bvp4c function, to observe the behaviour of the physical parameters, namely as local Nusselt number and local Sherwood number. The main finding of the dual numerical solutions varies for increasing governing parameters until they intersect at the critical points. In conclusion, the governing parameters affects the heat and mass transfer of the fluid flow model model.