Motion Compression Research Articles

Finite element analysis on the human and guinea pig cochlear vibration patterns under bone conduction stimulations

To compare the vibrational patterns of human and guinea pig cochleae accurately, we developed and validated a novel finite element model of the guinea pig, leveraging it to analyze vibrational patterns in the cochlea. This approach is mirrored in our examination of the human cochlear model, providing granular insights into the nuances of human bone conduction hearing. The comparative analysis reveals that the guinea pig cochlea mirrors human cochlear vibrational patterns, thus serving as an efficient proxy for exploring human cochlear function. The human mastoid and the upper region of the guinea pig’s skull are recommended as the convenient and comparable sites for bone conduction stimulation. The cochlear vibration pattern encompasses a mix of rigid, rotational, and compressive motion. Significantly, the guinea pig model demonstrates robust agreement with existing experimental data and other studies, these findings are confirming the validity of the model. Our study delineates the distinct roles of the three vibration types across various frequency spectrums. At lower frequencies, rigid motion is the dominant mechanism, supplemented by rotational motion. However, at higher frequencies, the influence of rigid motion wanes, ceding prominence to rotational and compressive motions. This trend is consistently observed in both human and guinea pig models.

Development of integrated noise analysis systems for ship propellers considering hull wake

Recently, the requirements for underwater radiated noise (URN) reductions in ships have become significant issues, driven by concerns over the impact of naval vessel performance and noise on marine ecosystems. The majority of URN generated from ships is attributed to the propeller. This study developed the integrated noise analysis systems that predict and analyze all the significant noises generated from the propellers, considering the hull wake. Since each type of noise has different sources and mechanisms, it is essential to analyze all types of noise to evaluate the propeller noise performances comprehensively. The model was developed for cavitation noise by compression and expansion motion of bubbles to evaluate the radiated noise. For non-cavitation noise, a noise model on the frequency domain was derived to cover the noise generated by changes in the wake. The unsteady pressure on the rotating blade was obtained using flow fields and wall pressure spectrum, extending to high frequencies. The developed system provides a valuable tool for propeller optimization designs by minimizing URN while considering the shape of the hull and appendages.

Observations and Model of Subauroral Sporadic E Layer Irregularities Driven by Turning Shears and Dynamic Instability

AbstractObservations of coherent scatter from patchy sporadic E layers in the subauroral zone made with a 30‐MHz coherent scatter radar imager are presented. The quasiperiodic (QP) echoes are similar to what has been observed at middle latitudes but with some differences. The echoes arise from bands of scatterers aligned mainly northwest to southeast and propagating to the southwest. A notable difference from observations at middle latitudes is the appearance of secondary irregularities or braids oriented obliquely to the primary bands and propagating mainly northward along them. We present a spectral simulation of the patchy layers that describes neutral atmospheric dynamics with the incompressible Navier Stokes equations and plasma dynamics with an extended MHD model. The simulation is initialized with turning shears in the form of an Ekman spiral. Ekman‐type instability deforms the sporadic E layer through compressible and incompressible motion. The layer ultimately exhibits both the QP bands and the braids, consequences mainly of primary and secondary neutral dynamic instability. Vorticity due to dynamic instability is an important source of structuring in the sporadic E layer.

Acrylic acid incorporated nanocellulose/acrylamide ion-conductive hydrogels for wearable sensors

In this paper, CNC/PAM/PAA interpenetrating network composite hydrogels were prepared from acrylamide (AM), cellulose nanocrystals (CNC), and acrylic acid (AA) by in situ free radical polymerization. CNC/PAM/PAA-Ca2+ hydrogels were successfully prepared by adding CaCl2 to the mixed solution to introduce ions. The composite hydrogels were characterized using scanning electron microscopy and Fourier transform infrared spectroscopy and tested for their mechanical, electrical, and sensing properties. The experimental results showed that the copolymerization reaction of AM and AA resulted in hydrogels with excellent mechanical properties, with a maximum tensile strength of 98.7 kPa and an elongation at break of 643.6%. In addition, the introduction of Ca2+ ions significantly improved the conductivity and sensitivity of the hydrogel. The developed multifunctional poly (AM-AA) hydrogels were able to stably detect the relative changes in electrical resistance during cyclic tensile, compressive, and bending motions of a human finger, which is expected to be widely used in flexible sensor devices.

Dynamic coupling effects of injection on spray and mixture formation in an asymmetrically vibrating combustion engine

Enhanced methods of energy conversion present a viable solution for addressing energy load challenges. This study introduces a vibrating combustion engine designed to enhance energy conversion efficiency by harnessing flexible dynamics and variable asymmetric motion. However, the consideration of its unique dynamic effects has emerged as a pivotal challenge in fuel-air mixing and combustion research. This study introduces a fuel spray and mixing simulation method that facilitates the reciprocal exchange of coupling parameters between the combustion and dynamics models. It iterates the simulation outcomes of motion and combustion to predict mixture formation. Subsequently, the method is employed to explore the impact of injection position on fuel spray and mixture formation. Results show that there is an optimum injection position for the operation frequency, and retarding or advancing leads to slow compression and weak gas motion for fuel spray and mixing, although retarded injection provides high in-cylinder gas pressure and temperature. The early injection generally causes long penetration, small droplet diameter, slight impingement, and fast evaporation, unless it is too early. The results further indicate that when IAP = 6 mm, a more uniform mixture can be attained at the beginning of combustion, leading to a thermal efficiency of up to 42.9% for the engine.

Artificial saliva induced structural breakdown of surimi gels with starch under continuous compressive motions

Food texture perception is dynamic, influenced by food properties and oral processing. Using the Repeatable Dual Extrusion Cell (RDEC), the oral processing dynamics of surimi gel with different corn starch concentrations (0–15%) in the presence of 1 ml artificial saliva or water were studied. The force-time curve showed increased peak forces with higher corn starch concentrations, peaking significantly at 10%, then decreasing at 15%. Salivary amylase played a crucial role in gel sample degradation, especially in samples with 5% starch, with a work value depletion ratio of 0.535 for sample with 1 ml water (SGW-5) and 0.406 for sample with 1 ml saliva (SGS-5). SEM analysis confirmed the formation of a continuous starch network with reduced intermolecular spaces in SGS-5. The starch-iodine complex showed decreasing order with increasing starch concentration, and SGS-5 exhibited the highest degradation rate (61.61 ± 0.92%). Mathematical modeling revealed that initial decay rates (k1) in gel sample decreased with increasing starch concentration, and samples with starch and artificial saliva had higher initial degradation rates. These findings highlight the intricate interplay between saliva and starch in the surimi gel matrix under continuous compressive motions by RDEC apparatus, providing insights for formulating food products with tailored textures properties.

Depowdering of an additively manufactured heat exchanger with narrow and turning channels

The evolution of heat exchangers (HXs) manufactured by additive manufacturing techniques is significantly needed. The depowdering solution is a necessity, especially if flow channels are incorporated into the design. In this study, a one-piece HX with multiple layers of internal channels (printed by binder jetting additive manufacturing) was completely depowdered through a developed approach. Each HX channel has a semi-elliptical geometry, four perpendicular turnings along the approximately 200-mm length, and an approximately 80-mm center segment that is inaccessible due to the turnings. To depowder this component, two approaches including the compressed air and the vortex motion were tested first. It was found that the compressed air or vortex motion alone could partially depowder the internal unbound powder of the printed heat exchanger. Consequently, for complete depowdering, a combined approach of the vortex motion and compressed air blowing with multiple cycles was developed and tested. A study of the effect of the vortex duration in each depowdering cycle was conducted, and results showed that an increase from five minutes to ten minutes resulted in a reduced number of stages for a complete depowdering.

Dynamic Spatial Focus for Efficient Compressed Video Action Recognition

Recent years have witnessed a growing interest in compressed video action recognition due to the rapid growth of online videos. It remarkably reduces the storage by replacing raw videos with sparsely sampled RGB frames and other compressed motion cues (motion vectors and residuals). However, existing compressed video action recognition methods face two main issues: First, the inefficiency caused by the usage of coarse-level information under full resolution, and second, the disturbing due to the noisy dynamics in motion vectors. To address the two issues, this paper proposes a dynamic spatial focus method for efficient compressed video action recognition (CoViFocus). Specifically, we first use a light-weighted two-stream architecture to localize the task-relevant patches for both the RGB frames and motion vectors. Then the selected patch pair will be processed by a high-capacity two-stream deep model for the final prediction. Such a patch selection strategy crops out the irrelevant motion noise in motion vectors, as well as reduces the spatial redundancy of the inputs, leading to the high efficiency of our method in the compressed domain. Moreover, we found that the motion vectors can help our method to address the possibly happened <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">static-issue</i> , which means that the focus patches get stuck at some regions related to static objects rather than target actions, which further improves our method. Extensive results on both the HMDB-51 and UCF-101 datasets demonstrate the effectiveness and efficiency of our method in compressed video action recognition tasks.

Role of magnetic pressure forces in fluctuation dynamo saturation

ABSTRACT Using magnetohydrodynamic simulations of fluctuation dynamos in turbulent flows with rms Mach numbers $\mathcal {M}_{\rm rms}= 0.2, 1.1$, and 3, we show that magnetic pressure forces play a crucial role in dynamo saturation in supersonic flows. First, as expected when pressure forces oppose compression, an increase in anticorrelation between density and magnetic field strengths obtains even in subsonic flows with the anticorrelation arising from the intense but rarer magnetic structures. In supersonic flows, due to stronger compressive motions density and magnetic field strength continue to maintain a positive correlation. However, the degree of positive correlation decreases as the dynamo saturates. Secondly, we find that the unit vectors of ∇ρ and ∇B2 are preferentially antiparallel to each other in subsonic flows. This is indicative of magnetic pressure opposing compression. This antiparallel alignment persists in transonic and supersonic flows at dynamo saturation. However, compressive motions also lead to the emergence of a parallel alignment in these flows. Finally, we consider the work done against the components of the Lorentz force and the different sources of magnetic energy growth and dissipation. We show that while in subsonic flows, suppression of field line stretching is dominant in saturating the dynamo, the picture is different in supersonic flows. Both field line stretching and compression initially amplifies the field. However, growing magnetic pressure opposes further compression of magnetic flux which tends to reduce the compressive motions. Simultaneously, field line stretching also reduces. But, suppression of compressive amplification dominates the saturation of the dynamo.

Deciphering the radio–star formation correlation on kpc scales

The relation between the resolved star formation rate (SFR) per unit area and the nonthermal radio continuum emission is studied in 21 Virgo cluster galaxies and the two nearby spiral galaxies, NGC 6946 and M 51. For the interpretation and understanding of our results, we used a 3D model where star formation, 2D cosmic-ray (CR) propagation, and the physics of synchrotron emission are included. Based on the linear correlation between the SFR per unit area and the synchrotron emission and its scatter, radio-bright and radio-dim regions can be robustly defined for our sample of spiral galaxies. We identified CR diffusion or streaming as the physical causes of radio-bright regions of unperturbed symmetric spiral galaxies as NGC 6946. The enhanced magnetic field in the region of interstellar medium (ISM) compression via ram pressure is responsible for the southwestern radio-bright region in NGC 4501. We identified the probable causes of radio-bright regions in several galaxies as CR transport, via either gravitational tides (M 51) or galactic winds (NGC 4532) or ram pressure stripping (NGC 4330 and NGC 4522). Three galaxies are overall radio dim: NGC 4298, NGC 4535, and NGC 4567. Based on our model of synchrotron-emitting disks, we suggest that the overall radio-dim galaxies have a significantly lower magnetic field than expected by equipartition between the magnetic and turbulent energy densities. We suggest that this is linked to the difference between the timescales of the variation in the SFR and the small-scale dynamo. In NGC 4535, shear motions increase the total magnetic field strength via the induction equation, which leads to enhanced synchrotron emission with respect to the SFR in an otherwise radio-dim galactic disk. Radio-bright regions frequently coincide with asymmetric ridges of polarized radio continuum emission, and we found a clear albeit moderate correlation between the polarized radio continuum emission and the radio/SFR ratio. When compression or shear motions of the ISM are present in the galactic disk, the radio-bright regions are linked to the commonly observed asymmetric ridges of polarized radio continuum emission and represent a useful tool for the interaction diagnostics. The magnetic field is enhanced (as observed in NGC 4535 and NGC 4501) and ordered by these ISM compression and shear motions. Whereas the enhancement of the magnetic field is rather modest and does not significantly influence the radio-SFR correlation, the main effect of ISM compression and shear motions is the ordering of the magnetic field, which significantly affects the CR transport. Cosmic-ray energy losses and transport also affect the spectral index, which we measured between 4.85 and 1.4 GHz. The influence of CR losses and transport on the spectral index distribution with respect to the synchrotron/SFR ratio is discussed with the help of model calculations. Based on our results, we propose a scenario for the interplay between star formation, CR electrons, and magnetic fields in spiral galaxies.

Two-Dimensional Electronic Spectroscopy Reveals Vibrational Modes Coupled to Charge Transfer in a Julolidine-BODIPY Dyad.

Understanding charge transfer (CT) dynamics in molecular donor-acceptor (D-A) dyads can provide insight into developing efficient D-A molecules for capturing solar energy. Here, we characterize the excited-state evolution of a julolidine-BODIPY (Jul-BD) D-A system with an emissive CT state using time-resolved fluorescence, femtosecond transient absorption, and two-dimensional electronic spectroscopies. Comparison of these results with those from phenyl-BODIPY (Ph-BD) allows us to identify the dynamics at play during CT state formation and its subsequent conversion to either a fully charge-separated or triplet state. Photoexcitation of Jul-BD in tetrahydrofuran results in the formation of an initial emissive CT state that relaxes before fully charge-separating. In contrast, Jul-BD in toluene exhibits similar CT state dynamics, albeit at slower timescales, before decaying to a terminal triplet species. Quantum beat analysis at early times in both solvents shows several vibronic modes, which are corroborated using density functional theory (DFT) calculations. For Ph-BD, a single 220 cm-1 compression mode about the single bond linking the phenyl to BODIPY modulates their orbital overlap. Three active vibronic modes, 147, 174, and 214 cm-1, are found in Jul-BD, regardless of the dielectric constant of the medium. These motions correspond to compression and torsional motions along the single bond joining Jul to BD and are responsible for the evolution of the spontaneous and stimulated emission features in the time-resolved spectroscopic data, which is further supported by time-dependent DFT calculations of the steady-state absorption spectrum of the Jul-BD as a function of increasing D-A dihedral core angle. These findings show how torsional and compression motions can play a pivotal role in intramolecular CT between a D and an A linked by a single bond.

Developing a novel method to measure texture changes of semi-solid food during a continuous compressive motion with high deformation using repeatable dual extrusion cell (RDEC)

Mechanical changes during mastication are difficult to evaluate without using a novel method because the size of the sample is continuously and randomly reduced. The repeatable dual extrusion cell (RDEC) has been developed to measure the breakdown characteristics of a semi-solid food (i.e., minced pork gel) from initial solid states to a small particle size during repeated high deformation compressive motions. The force–time curve of RDEC was recorded, followed by a calculation of work values for each cycle and fitted by Peleg’s model. The decrease of k1 (1.7–1.19) and k2 (1.56–1.42) values in Peleg’s model with an increase of moisture content (56.5–62.5 %) indicated the easily deformable characteristics of soft food. During RDEC measurement, as long as the characteristic length of the sample was larger than the diameter of RDEC probe hole (>4.5 mm), the initial sample size showed no significant influence (p < 0.05) on the measurements. RDEC demonstrated similar ratios of particulate size with human subjects up till 20 cycles of processing. The equilibrium force value from RDEC and SEM images demonstrate that the connective tissue in pork gel mainly contributed to the end-product texture properties after continuous mastication. This study provided an application of the novel RDEC device to estimate the texture and structural changes of minced pork gel under a continuous high deformation compressive motion.

General three-dimensional equilibrium for stationary inviscid fluids in the presence of a gravitational potential

Abstract In this paper, we study the properties of the general three-dimensional equilibrium solutions for steady-state equations of inviscid fluids. Incompressible, homogeneous, inhomogeneous and compressible flows motion in a gravitational potential are considered. General three-dimensional formulas for the gas pressure and the gravitational potential are obtained. For incompressible flows, the vector and scalar potentials of the velocity field are used to derive general formulas for general three-dimensional solutions. To verify our results, some examples are presented. For compressible flows, a class of three-dimensional solutions is constructed.

Optimized video compression with residual split attention and swin-block artifact contraction

Research in video compression has seen significant advancement in the last several years. However, the existing deep learning-based algorithms continue to be plagued by erroneous motion compression and ineffective motion compensation architectures, resulting in compression errors with a lower rate–distortion trade-off. To overcome these challenges, we present an end-to-end purely deep learning-based video compression method through a set of primary operations (e.g., motion estimation, motion compression, motion compensation, residual compression, and artifact contraction) differently. A deep residual attention split (DRAS) block is introduced for motion compression networks to pay more attention to certain image regions to create more effective features for the decoder while boosting the rate–distortion optimization (RDO) efficiency. A channel residual block (CRB) is proposed in motion compensation to yield a more accurate predicted frame, potentially improving the residual frame. To mitigate the compression errors, an artifact contraction module (ACM) by residual swin convolution UNet block is included in this model to improve the reconstruction quality. To improve the final frame, a buffer is added to fine-tune the previous reference frames. These modules combine with a loss function by assessing the trade-off and enhancing the decoded video quality. A comprehensive ablation study demonstrates the effectiveness of the proposed blocks and modules for video compression. Experimental results show the competitive performance of the proposed method on four benchmark datasets.

Operative treatment of nonunions in the elderly: Clinical and radiographic outcomes in patients at minimum 75 years of age

BackgroundLimited information exists on nonunion treatment in the elderly. This retrospective study evaluates whether results of operative treatment of nonunion of the humerus or femur in patients aged ≥ 75 years are comparable to those in younger patients.MethodsWe identified patients age ≥ 75 years with a nonunion of humerus or femur treated with open reduction and internal fixation. The Non-Union Scoring System was calculated. Complications, clinical outcome, and radiographic findings were assessed. Primary endpoint was nonunion healing. A literature review compared time to healing of humeral and femoral nonunion in younger populations.ResultsWe identified 45 patients treated for a nonunion of humerus or femur with > 12 months follow-up. Median age was 79 years (range 75–96). Median time to presentation was 12 months (range 4–127) after injury, median number of prior surgeries was 1 (range 0–4). Union rate was 100%, with median time to union 6 months (range 2–42). Six patients underwent revision for persistent nonunion and healed without further complications.ConclusionsUsing a protocol of debridement, alignment, compression, stable fixation, bone grafting and early motion, patients aged 75 years or older can reliably achieve healing when faced with a nonunion of the humerus or femur.Level of Evidence: IV.

Effect of heat source on kinetic energy transfer in compressible homogeneous shear turbulence

The effects of heat sources on kinetic energy transfer in compressible homogeneous shear turbulence are studied using numerical simulations at turbulent Mach numbers 0.1 and 0.4 for two levels of heat source. It is found that the strong heat source can significantly enhance both positive and negative components of subgrid-scale (SGS) kinetic energy flux and pressure–dilatation. After adding a strong heat source, compression motions enhance the positive SGS flux, and expansion motions enhance the negative SGS flux at a low turbulent Mach number. According to the Helmholtz decomposition, we found that the solenoidal and dilatational components of pressure–dilatation and SGS kinetic energy flux are increased greatly by a strong heat source at a low turbulent Mach number. The solenoidal mode plays a dominant role in the kinetic energy transfer process, but the contribution of the dilatational mode is not negligible. The dilatational component of the production term is increased by a strong heat source at a low turbulent Mach number, providing the main source of kinetic energy to the dilatational mode. The strong heat source also enhances the kinetic energy exchange between solenoidal mode and dilatational mode through nonlinear advection at a low turbulent Mach number. Moreover, the strong heat source enhances pressure anisotropy, redistribution of the kinetic energy of two transverse components, and energy transfer from internal energy to the kinetic energy through pressure–dilatation term. At a high turbulent Mach number, the strong heat source has little impact on the solenoidal and dilatational components of kinetic energy transfer terms.

Trigeminal afferents sense locomotion-related meningeal deformations.

The trigeminal sensory innervation of the cranial meninges is thought to serve a nociceptive function and mediate headache pain. However, the activity of meningeal afferents under natural conditions in awake animals remains unexplored. Here, we used two- and three-dimensional two-photon calcium imaging to track the activity of meningeal afferent fibers in awake mice. Surprisingly, a large subset of afferents was activated during non-noxious conditions such as locomotion. We estimated locomotion-related meningeal deformations and found afferents with distinct dynamics and tuning to various levels of meningeal expansion, compression, shearing, and Z-axis motion. Further, these mechanosensitive afferents were often tuned to distinct directions of meningeal expansion or compression. Thus, in addition to their role in headache-relatedpain, meningeal sensory neurons track the dynamic mechanical state of the meninges under natural conditions.

Mixing and energy transfer in compressible Rayleigh-Taylor turbulence for initial isothermal stratification

In compressible Rayleigh--Taylor instability, flow compressibility plays an important role in the generation of large-scale kinetic energy, which mainly comes from the conversion of potential energy for small stratification parameter (Sr) and conversion of internal energy through pressure-dilatation work for large Sr. The latter leads to bubble heights increasing rapidly and bubbles that are bigger at large Sr. The overall statistics of normalized subgrid-scale (SGS) flux of kinetic energy is nearly independent of Sr, but the reverse SGS flux increases significantly with increase of Sr. The compression motions enhance direct SGS flux and the expansion motions strengthen the reverse SGS flux.

ГИДРОДИНАМИЧЕСКИЙ АНАЛИЗ ПРОЦЕССОВ ТОПЛИВНЫХ СИСТЕМ ТИПА «COMMON RAIL» В СРЕДЕ ИМИТАЦИОННОГО МОДЕЛИРОВАНИЯ AVL BOOST HYDSIM

The study objective is modeling hydro-dynamic processes occurring in an electro-magnetic diesel fuel injector using AVL Boost Hydsim software package (SP).&#x0D; The task to which the paper is devoted is the design of equipment for Common Rail battery injection and fuel atomization systems; description of methods for developing battery fuel systems using Hydsim SP.&#x0D; Research methods: numerical simulation of fuel supply based on hydrodynamic dependencies describing the compressible viscous fluid motion in Hydsim software environment.&#x0D; Novelty of the work: due to constant tightening of environmental, technical and economic requirements for diesel internal combustion engines (ICE), which directly depend on the perfection of the fuel supply system, there is a need for software that allows engineers to design the appropriate fuel equipment. It is also important to have an effective and comprehensive methodology for working with such software solutions.&#x0D; Research results: a model of an electromagnetic fuel injector of a diesel engine is developed, a brief description is given of the methodology for constructing a hydraulic model of the nozzle (in a two-dimensional problem statement) and an analysis of the simulation results obtained.&#x0D; Conclusions: AVL Boost Hydsim SP has a number of advantages over its competitors, which can significantly reduce the time spent on the design and implementation of modern fuel equipment, opportunities for dynamic analysis of hydraulic and hydromechanical engine systems appear.

Origami-Inspired Structure with Pneumatic-Induced Variable Stiffness for Multi-DOF Force-Sensing.

With the emerging need for human–machine interactions, multi-modal sensory interaction is gradually pursued rather than satisfying common perception forms (visual or auditory), so developing flexible, adaptive, and stiffness-variable force-sensing devices is the key to further promoting human–machine fusion. However, current sensor sensitivity is fixed and nonadjustable after fabrication, limiting further development. To solve this problem, we propose an origami-inspired structure to achieve multiple degrees of freedom (DoFs) motions with variable stiffness for force-sensing, which combines the ductility and flexibility of origami structures. In combination with the pneumatic actuation, the structure can achieve and adapt the compression, pitch, roll, diagonal, and array motions (five motion modes), which significantly increase the force adaptability and sensing diversity. To achieve closed-loop control and avoid excessive gas injection, the ultra-flexible microfiber sensor is designed and seamlessly embedded with an approximately linear sensitivity of ∼0.35 /kPa at a relative pressure of 0–100 kPa, and an exponential sensitivity at a relative pressure of 100–350 kPa, which can render this device capable of working under various conditions. The final calibration experiment demonstrates that the pre-pressure value can affect the sensor’s sensitivity. With the increasing pre-pressure of 65–95 kPa, the average sensitivity curve shifts rightwards around 9 N intervals, which highly increases the force-sensing capability towards the range of 0–2 N. When the pre-pressure is at the relatively extreme air pressure of 100 kPa, the force sensitivity value is around 11.6 /N. Therefore, our proposed design (which has a low fabrication cost, high integration level, and a suitable sensing range) shows great potential for applications in flexible force-sensing development.