Comprehensive Life Cycle Assessment Research Articles

Using Open BIM and IFC to Enable a Comprehensive Consideration of Building Services within a Whole-Building LCA

Holistic views of all environmental impacts for buildings such as Life Cycle Assessments (LCAs) are rarely performed. Building services are mostly included in this assessment only in a simplified way, which means that their embodied impacts are usually underestimated. Open Building Information Modeling (BIM) and Industry Foundation Classes (IFC) provide for significantly more efficient and comprehensive LCA performance. This study investigated how building services can be included in an open BIM-integrated whole-building LCA for the first time, identified challenges and showed six solution approaches. Based on the definition of 222 exchange requirements and their mapping with IFC, an example BIM model was modeled before the linking of 7312 BIM objects of building services with LCA data that were analyzed in an LCA tool. The results show that 94.5% of the BIM objects could only be linked by applying one of the six solution approaches. The main problems were due to: (1) modeling by a lack of standardization of attributes of BIM objects; (2) difficult machine readability of the building services LCA datasets as well as a general lack of these; and (3) non-standardized properties of building services and LCA specific dataset information in the IFC data format.

Life-Cycle Greenhouse Gas Emissions and Human Health Trade-Offs of Organic Waste Management Strategies.

Waste-to-energy systems can play an important role in diverting organic waste from landfills. However, real-world waste management can differ from idealized practices, and emissions driven by microbial communities and complex chemical processes are poorly understood. This study presents a comprehensive life-cycle assessment, using reported and measured data, of competing management alternatives for organic municipal solid waste including landfilling, composting, dry anaerobic digestion (AD) for the production of renewable natural gas (RNG), and dry AD with electricity generation. Landfilling is the most greenhouse gas (GHG)-intensive option, emitting nearly 400 kg CO2e per tonne of organic waste. Composting raw organics resulted in the lowest GHG emissions, at -41 kg CO2e per tonne of waste, while upgrading biogas to RNG after dry AD resulted in -36 to -2 kg CO2e per tonne. Monetizing the results based on social costs of carbon and other air pollutant emissions highlights the importance of ground-level NH3 emissions from composting nitrogen-rich organic waste or post-AD solids. However, better characterization of material-specific NH3 emissions from landfills and land-application of digestate is essential to fully understand the trade-offs between alternatives.

Life cycle assessment of lithium oxygen battery for electric vehicles

In this analysis, a Li–O2 battery system with a 63.5 kWh capacity is configured to sustain a middle-sized electric vehicle (EV) according to the modified Battery Performance and Cost (BatPaC) model. The life cycle impacts of the Li–O2 battery system for the EV application are evaluated by developing a comprehensive life cycle assessment (LCA) model. The conventional lithium-nickel-manganese-cobalt oxide (NMC) cathode plus the graphite anode are modeled as the reference lithium-ion battery (NMC-G LIB) system to benchmark the life cycle environmental impact results of the Li–O2 battery system. The comparison results reveal that the Li–O2 battery system has a lower life cycle environmental burdens compared to the conventional NMC-G battery thanks to the avoidance of such heavy metals as manganese, nickel, and cobalt in the positive electrode materials and lower energy consumption during the battery production process, thus resulting in lower environmental impacts. Notably, the life cycle greenhouse gas emissions of the Li–O2 battery system are 149 g CO2, eq km−1, representing a 9.5% decrease from that of the NMC-G battery. The Li–O2 battery, therefore, can be an environmentally sustainable battery technology to replace conventional NMC-G battery for next-generation EV applications in the future.

Agave: A promising feedstock for biofuels in the water-energy-food-environment (WEFE) nexus

The aim of this study was to conduct the first comprehensive life cycle assessment and economic analysis on ethanol produced from agave. Compositional and field data from a field experiment in Queensland, Australia was used. Our study shows that ethanol yields from agave (7414 L/ha/year) are comparable to Brazilian sugarcane (9900/L/ha/year) and higher than US corn ethanol (3800/L/ha/year). Furthermore, agave outperforms current first generation biofuel crops in water-related impacts, including Freshwater Eutrophication (96% lower than corn and 88% lower than sugarcane), Marine Ecotoxicity (59% lower than corn and 53% lower than sugarcane) and Water Consumption (46% lower than corn and 69% lower than sugarcane). The life cycle fossil energy use (Fossil Resource Scarcity) for agave is 58% lower than corn and 6% higher than sugarcane. The Global Warming impact for agave is also 62% and 30% lower than that of corn and sugarcane, respectively. Although its Land Use impact, measured by land occupied per unit ethanol output, is 98% higher than corn and 2% higher than sugarcane, agave can be grown on arid land that is not suitable for food crops. The economic analysis suggests that first generation ethanol production from agave is not commercially viable without government support. Overall, the results show that agave is promising for biofuel production in the water-energy-food-environment context.

Perspectives on “Game Changer” Global Challenges for Sustainable 21st Century: Plant-Based Diet, Unavoidable Food Waste Biorefining, and Circular Economy

Planet Earth is under severe stress from several inter-linked factors mainly associated with rising global population, linear resource consumption, security of resources, unsurmountable waste generation, and social inequality, which unabated will lead to an unsustainable 21st Century. The traditional way products are designed promotes a linear economy that discards recoverable resources and creates negative environmental and social impacts. Here, we suggest multi-disciplinary approaches encompassing chemistry, process engineering and sustainability science, and sustainable solutions in “game changer” challenges in three intersecting arenas of food: Sustainable diet, valorisation of unavoidable food supply chain wastes, and circularity of food value chain systems aligning with the United Nations’ seventeen Sustainable Development Goals. In the arena of sustainable diet, comprehensive life cycle assessment using the global life cycle inventory datasets and recommended daily servings is conducted to rank food choices, covering all food groups from fresh fruits/vegetables, lentils/pulses and grains to livestock, with regard to health and the environment, to emphasise the essence of plant-based diet, especially plant-based sources of protein, for holistic systemic sustainability and stability of the earth system. In the arena of unavoidable food supply chain wastes, economically feasible and synergistically (energy and material) integrated innovative biorefinery systems are suggested to transform unavoidable food waste into functional and platform chemical productions alongside energy vectors: Fuel or combined heat and power generation. In the arena of circularity of food value chain systems, novel materials and methods for plant-based protein functionalisation for food/nutraceutical applications are investigated using regenerative bio-surfactants from unavoidable food waste. This circular economy or industrial symbiosis example thus combines the other two arenas, i.e., plant-based protein sourcing and unavoidable food waste valorisation. The multi-disciplinary analysis here will eventually impact on policies for dietary change, but also contribute knowledge needed by industry and policy makers and raise awareness amongst the population at large for making a better approach to the circular economy of food.

Environmental life cycle assessment of olive pomace utilization in Turkey

Turkey is one of the top five producers of olive oil in the globe. Olive pomace, a by-product of olive oil production, has several environmental impacts on the ecosystem when untreated. In this study we compared five different scenarios for the treatment and utilization olive pomace in terms of their life cycle environmental impacts. These scenarios include i) traditional, ii) two-phase, and iii) three-phase production of olive oil followed by producing biofuel pellets from the olive pomace, iv) producing fodder additives from olive pomace, and v) composting the olive pomace. The functional unit was chosen as olive pomace produced as a result of the production of 1 kg of olive oil. The following impacts were calculated by using CCaLC software and CML2001 method, with a gate-to-grave approach: global warming potential, acidification potential, eutrophication potential, ozone layer depletion, photochemical smog formation potential, and human toxicity potential. An overall impact calculation was also performed by normalizing the individual impacts and assigning equal weights to them. The first three scenarios were observed to have significantly lower impacts, and in many cases even impact credits for the system, mainly due to the fact that utilizing the biofuel pellet eliminates the consumption, thus the production of natural gas, which has especially high environmental impacts in case of Turkey. Traditional olive oil production was found to have a lower overall impact compared to two-phase and three-phase production. For most of the impacts, operational processes and utilization emerged as the hotspots. This study is considered to be a valuable guide for the olive oil sector in Turkey in terms of reducing its environmental footprint while getting economic gain. This particular study is novel in the sense that to the best of our knowledge, it is the first study conducted in Turkey in which a comprehensive life cycle assessment of utilizing olive pomace has been conducted. Future studies on this topic should focus on the consequential life cycle assessment of the nation-wide implementation of the scenarios analyzed in this work.

Comparative Life-Cycle Assessment of Aquifer Thermal Energy Storage Integrated with in Situ Bioremediation of Chlorinated Volatile Organic Compounds.

Due to the increasing need for sustainable energy and environmental quality in urban areas, the combination of aquifer thermal energy storage (ATES) and in situ bioremediation (ISB) has drawn much attention as it can deliver an integrated contribution to fulfill both demands. Yet, little is known about the overall environmental impacts of ATES-ISB. Hence, we applied a life-cycle assessment (LCA) to evaluate the environmental performance of ATES-ISB, which is also compared with the conventional heating and cooling system plus ISB alone (CHC + ISB). Energy supply via electricity is revealed as the primary cause of the environmental impacts, contributing 61.26% impacts of ATES-ISB and 72.91% impacts of CHC + ISB. Specifically, electricity is responsible for over 95% of water use, global warming potential, acidification potential, and respiratory inorganics, whereas the production of the biological medium for bioremediation causes more than 85% of the eco- and human toxicity impacts in both cases. The overall environmental impact of ATES-ISB is two times smaller than that of CHC + ISB. Sensitivity analysis confirms the importance of electricity consumption and electron donor production to the environmental impacts in both energy supply and bioremediation. Thus, future studies and practical applications seeking possible optimization of the environmental performances of ATES-ISB are recommended to focus more on these two essential elements, e.g., electricity and electron donor, and their related parameters. With the comprehensive LCA, insight is obtained for better characterizing the crucial factors as well as the relevant direction for future optimization research of the ATES-ISB system.

Techno-economic analysis and life cycle assessment of heterotrophic yeast-derived single cell oil production process

The widespread application and utilization of vegetable oils and fats has led to a significant increase of their annual production. Fats and oils are mainly consumed as food and as animal feed, as raw material in the chemical industry and more recently as raw material for biofuel production. In this work the economics of the biochemical production of microbial oil is investigated and the life cycle assessment is performed for first time in the open literature. The production process is simulated using commercial simulators to perform accurate material and energy balances and all necessary data are collected from the open literature. Following the process simulation step a detailed technoeconomic analysis is performed and the fixed capital investment is estimated for a production that varies from 2 to 40 kt of microbial oil per year. Having completed the technoeconomic analysis the Life Cycle Inventory Analysis is performed, and the environmental impacts are estimated, using the comprehensive Life Cycle Assessment methodology.

Life Cycle Analysis of Strengthening Existing RC Structures with R-PE-UHPFRC

(PE)-UHPFRC, a novel strain hardening ultra high-performance fiber reinforced concrete (UHPFRC) with low clinker content, using Ultra-High Molecular Weight Polyethylene (UHMW-PE) fibers, was developed for structural applications of rehabilitation. A comprehensive life cycle assessment (LCA) was carried out to study the environmental impact of interventions on an existing bridge using PE-UHPFRC compared with conventional UHPFRC and post-tensioned reinforced concrete methods in three categories of global warming potential (GWP), cumulative energy demand (CED), and ecological scarcity (UBP). The results showed 55% and 29% decreases in the environmental impact of the PE-UHPFRC compared with reinforced concrete and conventional UHPFRC methods, respectively, which highlighted the effectiveness of this material for the rehabilitation/strengthening of structures from the viewpoint of environmental impact.

Environmental analysis of selective laser melting in the manufacturing of aeronautical turbine blades

The exponential growth of additive manufacturing technologies is not only improving production processes to achieve functional requirements for products, but it could also help to minimize environmental impacts. In order to align a green product lifecycle management vision, companies need to implement emerging technologies and define a set of metrics that measure the benefits of the change. Each product requires a particular and optimized manufacturing process plan, and each production phase must achieve a significant reduction of critical metrics for the whole Life Cycle Assessment (LCA). This paper provides a comprehensive and comparative LCA of two manufacturing process plans for the case study of an aircraft engine turbine blade. The first process consists of a combination of Investment Casting and Precision Machining and the second consists in the replacement of Investment casting by Selective Laser Melting as an emergent process for near net shape fabrication. The collected data for the comparison includes Global Warming Potential (GWP), Acidification Potential (AP), Ozone layer Depletion Potential (ODP), Human Toxicity Potential (HTP), and Human Toxicity (HT) with cancer and non-cancer effects. The relative analysis shows that, for the critical indicators, an apparent improvement in CO 2 emissions reduction is achieved as well as in the other hazardous emissions. The results showed that the whole lifecycle of Conventional Manufacturing corresponds to 7.32 tons of CO 2 , while, the emission of the Additive Manufacturing is 7.02 tons of CO 2 . The results analysis can be used for decision-making, and it can help for facing future comparative works to explore cleaner manufacturing technologies. • Process Modelling of Additive and Conventional Aerospace Manufacturing. • Data mining and simulation of manufacturing operations with a LCA tool. • Analysis of manufacturing process plan with Selective Laser Melting. • Sustainability Analysis of Investment Casting compared to Selective Laser Melting.

How sustainable are sustainability conferences? – Comprehensive Life Cycle Assessment of an international conference series in Europe

Abstract Scientific conferences are a widely established and a highly important and an indispensable component for knowledge sharing, networking activities, scientific debate etc. What is usually ignored is the resource demand of such an event, putting an enormous burden on the environment. For almost two decades now, there has been an increasing demand for mitigation of environmental impacts of scientific conferences. However, in the field of sustainability science hardly any measures have been taken as only one out of ten sustainability conferences promoted action to reduce environmental impacts. A comprehensive Life Cycle Assessment (LCA) has not been carried out for all phases of a conference. This study therefore strives to conduct a comprehensive LCA of a scientific conference held on sustainability topics. The assessment includes three main parts: 1) preparation of the conference, 2) conference execution, and 3) further pre-/post-conference activities (participants’ travel associated with the conference). The functional unit is defined as: Holding one 3-day international academic conference on sustainability topics. The results display that travel activities of participants dominantly contribute to the overall environmental impact. Further relevant phases are catering, hotel overnight stays as well as environmental burdens associated with the conference venue. It was found that the conference under consideration leaves a carbon footprint of 455 tonnes of CO2 eq., equivalent to an average of 0.57 tonnes of CO2 eq. per participant. A scenario analysis displayed that changes towards train travelling, vegetarian meals and reduction of conference materials can significantly better the environmental profile of a conference. Further measures of environmental optimization could be identified, e.g. digital meetings. It is however unlikely that those will totally replace physical meetings. The social benefits of direct personal and globally-oriented exchange can probably not be outweighed by environmental savings. Future conference planning should thus relate the sustainability benefits with the detrimental impacts.

Life cycle assessment, energy balance and sensitivity analysis of bioethanol production from microalgae in a tropical country

Overuse of petroleum and ongoing carbon-di-oxide (CO2) rise in the air of Brunei Darussalam has been emerged as a major environmental concern in this country. To resolve this issue, a comprehensive life cycle assessment (LCA) of alternative biofuel, bioethanol production from microalgae was demanded for realistic implementation. Therefore, LCA of bioethanol production from microalgae in terms of CO2 emission and energy balance was investigated based on the scenario of industrial-scale in Brunei Darussalam. This study demonstrated that 220 tons microalgae biomass was cultivated on 6 ha offshore lands for commercial bioethanol generation. The annual outcome of this commercial bioethanol plant has revealed net CO2 balance 218.86 ton. From the energy perspective, this study manifested itself as favourable with net energy ratio, 0.45 and net energy balance, −2749.6 GJ y−1. Apart from CO2 balance and energy generation aspect, the project demanded low water and land footprints. For photobioreactor cultivation, water and land footprints were 2 m3 GJ−1 and 2 m2 GJ−1, respectively as well as for open pond approach, they were 87 m3 GJ−1 and 13 m2 GJ−1, respectively. The project also presented microalgae growth supplements (phosphorus and nitrogen) accumulation possibilities from wastewater of manure and industries which is another positive aspect for benign environment. Overall, the commercial plant presented low CO2 emission, low land and water demand for microalgae cultivation, alternative eco-friendly and cheaper nutrients sources, quite high energy generation with main product and by-products. Thus, this study projected positive impact on energy and environmental aspects of microalgae-to-bioethanol conversion.

Diversification not specialization reduces global and local environmental burdens from livestock production

Milk and beef production generates environmental burdens globally and locally. Across many regions a typical dairy intensification pathway is for dairy farms to specialize on milk production and reduce the co-production of beef (i.e. ‘dairy-beef’). Dairy-beef thus reduces and beef needs to be produced elsewhere if beef production is to be maintained. Life Cycle Assessment (LCA) studies quantifying the environmental implications of dairy and beef production have largely focused on the farm level and not captured system connections. Further LCA work has generally represented the ‘average’ farm of a region, consequently ignoring the range in farm management observed in practice and few studies consider a range of LCA environmental footprints other than carbon footprints. For the first time, we present comprehensive LCA results for multiple environmental burdens based on a large panel dataset for commercial dairy and suckler-beef farms. We present a 15-year LCA assessment of a total of 738 dairy (3624 data points in 15 years) and 1887 suckler-beef (10,340 data points in 15 years) UK farms for five major LCA footprints. We also explore the footprint implications of compensating for reduced dairy-beef through producing this ‘displaced’ beef on suckler-beef farms. We found a substantial variation in farm footprints not captured in ‘average farm’ studies. Dairy-beef was much more efficient than beef produced on suckler-beef farms in terms of footprints per unit of beef output. Reducing dairy-beef and replacing it on a suckler-beef farm generally significantly increased environmental burdens. A reduction in carbon footprint was also associated with a reduction in other burdens suggesting no trade-off between local and global emissions. Increasing dairy farm diversification via higher dairy-beef output per unit of milk reduced burdens by up to 11–56%, on average, depending on burden and sensitivity run. We conclude that overspecialization of dairy farms in milk production increases the combined burdens from beef and milk, and that more intensive beef systems that make more efficient use of forage land play a crucial role in mitigating these burdens.

Assessment of Sustainable Construction Measures in Building Refurbishment—Life Cycle Comparison of Conventional and Multi-Active Façade Systems in a Social Housing Complex

Building refurbishment plays a key role in the de-carbonization of the European building stock. Whilst the renewal of the thermal envelope increases energy efficiency during the operational phase, the type of material is highly relevant for the overall environmental impact of the refurbishment. Expanded polystyrene (EPS) is most widely used for external thermal insulation systems but is also a material based on fossil resources. Thus, alternatives made from renewable raw materials must be more widely used in order to reach the climate goals. However, comparable data on long-term material effects over the life cycle are needed for developers and planners to make informed decisions. In a Viennese case study for the largest social housing property manager in Europe, two different façade systems have been analyzed to assess the overall environmental impact of the materials. In a comprehensive life cycle assessment, a Multi-Active Façade system based on recycled paper has been compared with a conventional external thermal insulation composite system (ETICS) using EPS. It shows that whilst the evaluation during the operational phase alone results in a similar ecological footprint of the ETICS, the analysis over the whole life cycle provides a clear positive indication for the novel Multi-Active Façade.

Computer-aided supporting tool for LCA evaluation of energy efficiency of the buildings – assessment method and case studies

In the paper methods and the development of computer tool for the comprehensive life cycle assessment evaluation of the new or renovated buildings is presented. To support decision making process, computer tool was developed and consists of two computational units: the building description unit (BDU), and the life cycle assessment tool (Etool). BDU enables the determination of energy needs and final energy demand for the operation of EPBD systems. For the purpose of environment impact assessment, the life cycle inventory database is integrated into the BDU. Data are exported to LCA evaluation tool Etool that include two assessment modules: life cycle environmental impact module for mid-point and end-point assessment taking into account impact groups and damage factors from IMAPCT2002+ and ReCiPe methods and life cycle costs assessment module for evaluation of costs optimal values of energy efficiency measures for nearly zero energy buildings (nZEB). In the paper case studies are presented and discussed. The results show that energy use has dominant influence on buildings’ environment impacts and that life cycle cost analysis show optimal thermal insulation thickness higher than required in current regulative.

Trade-offs with longer lifetimes? The case of LED lamps considering product development and energy contexts

Longer product lifetimes are promoted by the EU's Circular Economy Action Plan, but incentivising longer lifetimes could also result in trade-offs between different environmental impacts for some product categories. LED lamps are still experiencing improvements in efficacy and material design, which raises questions about whether longer lifetimes are desirable from an overall environmental perspective. Applying a comprehensive life cycle assessment using actual product cases from 2012 to 2017, the research builds on previous product lifetime studies and lighting product research to determine the scenarios in which longer lifetimes are desirable from an overall environmental perspective. The factors explored in the scenarios included improving products in terms of efficiency and dematerialisation as well as decarbonised electricity contexts. The results indicate that product replacement with improved products resulted in environmental benefits compared to keeping longer life products in use, but there are some trade-offs between environmental impacts. However, these trade-offs are minimised in the context of decarbonised electricity mixes and will further decrease as LED lamp technology matures and product development slows. The policy implications of the findings are also discussed.

Integration of LCA and LCC analysis within a BIM-based environment

Abstract There is a growing concern in society for the environmental impacts of a built environment. In this regard, the use of building information modelling (BIM) tools has arisen as a new trend in the construction industry to improve the sustainable assessments of buildings in the design phase. For that purpose, current approaches either focus on the use of BIM together with several programs, or solely use it for an automatic quantity take-off. However, as noted in the literature, the lack of semantic information within BIM models can lead to ineffective decision-making processes and models that are unsuitable for the operation and maintenance stages. Therefore, the present study explores the potential of BIM as a repository for the life cycle assessment (LCA) and life cycle costing (LCC) information, and how that information should be used for an environmental and economic analysis. By doing so, the authors intend to discuss the potential of BIM as a data repository and its capacity for supporting an automatic/semi-automatic environmental and economic assessment. A BIM-LCA/LCC framework was proposed, which led to the development of an information delivery manual and a model view definition (IDM/MVD), using the industry foundation classes (IFC) schema, for the integration and exchange of information within a BIM-based environment. Finally, the authors implemented the proposed framework with a case study. It is observed that, although most recent IFC schemes already consider some of the required information, a considerable number of properties are still required to conduct a comprehensive LCA and LCC analysis. Thus, the work presented here contributes to the existing background knowledge necessary for future implementations of BIM-based LCA/LCC and for software developers to develop a suitable BIM-LCA/LCC tool.

Comprehensive life cycle assessment of large wind turbines in the US

The goal of this study was to conduct a comprehensive life cycle assessment (LCA) for large onshore wind turbines in the US, including all phases of the turbine’s life cycle separately (materials acquisition, manufacturing, transportation, installation, operation and maintenance, and end of life) and multiple impact categories (environmental, human health, resource consumption). Particular attention was given to make the installation and maintenance phases complete and transparent. The contribution of this study is that it is the first comprehensive LCA for large wind turbines in the US, where different transport distances (including overseas transport of turbine parts), truck emission standards, mixes of electricity sources, and waste disposal practices will affect impacts, compared to those conducted for other countries. It is also the first comprehensive LCA to examine separately all 6 phases of the turbine’s life cycle (in particular separating manufacturing from raw material acquisition/installation) and the first to evaluate turbine lifespan as a sensitivity parameter. The study was conducted for 200 Gamesa 2-MW wind turbines located near Abilene, Texas. SimaPro8 software was used for modeling, according to ISO 14040 standards. The manufacturing phase contributed the greatest overall impacts, which was consistent with other studies; hence, alternative methods of manufacturing should be explored to reduce impacts. Installation, transportation, maintenance, and raw materials acquisition ranked second through fifth, respectively. Consistent with other studies, end-of-life ranked last, which means that the disposal method (landfilling or combustion) for turbine parts which are not recycled makes little difference in terms of the overall turbine life cycle.

Identification of the potential for carbon dioxide emissions reduction from highway maintenance projects using life cycle assessment: A case in China

This paper investigates the neglected potential of carbon dioxide (CO2) emissions reduction from highway maintenance projects. Conventional assessment (CA) on fuel combustion of off-road equipment during maintenance, and a comprehensive life cycle assessment (LCA) on the materials production, fuel production, traffic delay and maintenance equipment were conducted for four typical maintenance schemes in a real highway project in China, through Microsoft spreadsheet models, VISSIM and CMEM model. The focus of the case study was to understand the magnitude and source of the gap of CO2 emissions assessment results between LCA and CA. In this study, we also checked scenarios that apply a few mitigation options from several industrial sectors in four typical maintenance schemes to investigate how significant potential for decarbonization of the highway maintenance might be neglected without using LCA. Results suggest that there exists an obvious gap between the total CO2 emissions per lane per kilometer of CA and that of LCA, and the gap is even up to 22 times of the CA results in this specific case study. Traffic delay caused by the lane closure has the largest contribution to the gap, while the shares of materials production and fuel production match. The scenarios analysis of mitigation strategies associated with the transport sector and other industrial sectors indicates that the LCA model could effectively identify the dominant inputs and CO2 emissions outputs of individual maintenance process in the complicated transport system, while CA may neglect or underestimate the potential for adopting some mitigation strategies, especially for mitigation options from other industrial sectors.

Life cycle assessment of domestic fuel cell micro combined heat and power generation: Exploring influential factors

Residential Fuel Cell micro combined heat and power (FC-μCHP) systems can help decarburizing the energy system. In the European ene.field project, the environmental performance of FC-μCHP under different conditions was therefore evaluated by means of a comprehensive Life Cycle Assessment (LCA). Important influential factors were explored, i.e. heating demands, full load hours (FLHs) and electricity replacement mixes (ERMs). The systems were compared with a stand-alone Gas Condensing Boiler (GCB) and a heat pump (HP, only in single family homes, SFHs). For the initially assumed FLHs and the current ENTSO-E ERM, relevant environmental impacts including climate change are generally smaller for the FC-μCHPs than for the HP and the stand-alone GCB. In the setting “existing SFHs in central climate” with the highest deployment potential, GHG emission savings are higher the more carbon-intensive the ERM is and/or higher the net electricity export into the grid is. The results are discussed and put into perspective. Further research demands as well as product development opportunities are outlined. The importance of a green hydrogen economy is emphasized.