Polymeric Compounds Research Articles

Influence of dental prostheses materials on the condition of oral mucosa local homeostasis

Objective. To study the influence of base materials used in the manufacture of removable dentures on the immune homeostasis of the oral mucosa, and, as a consequence, on the clinical condition of the oral mucosa and periodontium of supporting teeth. To create fundamental principles for the development of a pathogenetically substantiated choice of basic dental materials of various chemical natures for removable prosthetics based on the analysis of the parameters of immune homeostasis of the oral mucosa. Materials and methods. 154 patients aged 40 to 85 using dentures based on acrylic, polyurethane plastics and thermoplastics for 6 months, participated in the study. Indicators of immune homeostasis and the identified clinical manifestations of the influence of the prosthesis material such as chronic periodontitis and gingivitis were compared using the statistical method of conjugate multifield tables. Results. The indicators CD4+/CD8+, CD11/CD303, CD68, CD204, CD163, Ki-67 phenotypic markers were determined in gingival biopsies of the prosthetic bed of patients using dentures based on acrylic, polyurethane and thermoplastic for 6 months. Analysis of the statistical significance of differences proved the influence of the prosthesis material on indicators of cellular immune homeostasis, with a shift of homeostasis towards the pro-inflammatory phenotype, and the suppression of the anti-inflammatory factor in circulating monocytes. Conclusions. The study shows that, although each type of removable dentures has its own advantages and disadvantages, the response of the cellular immunity of the oral mucosa to polyurethane dentures is less than to acrylic and thermoplastic ones in relation to the control group. The use of polyurethane prostheses is reasonable as temporary ones during the healing stage of surgical interventions in the oral cavity, in particular tooth extraction and implantation. This type of prosthesis can be recommended as a permanent one for patients with a severe allergic reaction, especially to polymer compounds and dyes.

Nanofillers modified with aluminum carboxylate for application in Polymer composite electrolytes for lithium-ion batteries

AbstractOne of the additives that positively influence the parameters of the electrolyte for lithium-ion cells are ceramic nanoparticles, such as SiO2 and α-Al2O3. However, they tend to agglomerate and sediment, which is an unfavorable phenomenon. An effective strategy to prevent this is to modify the surface of the particles with polymeric compounds, which can increase compatibility and stability in the electrolyte system. To reduce agglomeration and sedimentation, a method was developed to modify aluminum oxide and silica particles using aluminum carboxylate, which chemically combines with inorganic particles that have hydroxyl groups on their surface through an alkoxide bond. This method allows the introduction of oligooxyethylene groups to the ceramic surface, thus obtaining more stable systems. The effectiveness of this modification was confirmed through dynamic light scattering (DLS) measurements of particle size in liquid organic solvents, which are potential solvents for liquid electrolytes in lithium-ion cells. The modified nanosilica and aluminum oxide particles were then used as additives to solid polymer electrolytes made of poly(ethylene oxide) (PEO). This led to higher conductivity values compared to the use of unmodified fillers. The obtained values of lithium transference number for solid polymer electrolyte with PEO/CF3SO3Li and nanosilica or aluminum oxide modified with aluminum carboxylate are equal to 0.32–0.40.

RATIONALE FOR THE USE OF A HYDRATE FORMATION INHIBITOR IN PRODUCTION WELLS IN WESTERN SIBERIA

Operation of the gas transmission system under hydrate conditions leads to the risk of deposits, changes in operating modes and plugging of pipelines and gas transmission equipment. Inhibitors such as methanol and glycols are mainly used to prevent hydrate formation. Less commonly, small amounts of polymer compounds (kinetic inhibitors) are used, which instead of inhibiting formation work thermodynamically, slowing the rate of formation of gas hydrates. However, the problems associated with excessive methanol consumption and the production of products that do not meet the standards for the content of dissolved methanol remain unresolved. These problems can be solved by improving the technological scheme of gas collection and treatment. The article focuses on the use of methanol as a hydrate inhibitor, which effectively prevents this process. It has been shown that in order to optimize the flow rate of methanol, it is necessary to take into account the salinity of formation water. The urgency of the problem is due to the high risks for the normal operation of wells, since gas hydrates can lead to clogging of equipment and pipelines, which in turn can cause emergencies and shutdown of the entire production. The article describes the current status of field development in Western Siberia, including an analysis of reserves and an assessment of production potential. Seven pay zones have been identified in the field, two of which are associated with the Upper Cretaceous deposits, four with the Upper Jurassic and one with the Middle Jurassic. The authors proposed a method for calculating the optimal amount of methanol required to prevent the formation of gas hydrates. The calculations are based on data on the composition of Cenomanian gas, temperature and other conditions in the field under consideration. The study identified critical points where gas hydrates are most likely to form. This made it possible to accurately calculate the required amount of methanol to maintain the hydrate-free state of the wells. The results of testing in the field of Western Siberia showed that the dosing of methanol is an effective means to prevent hydrate formation.

Biofilm Formation in Clinical Isolates of Fusarium

Many microbial pathogens form biofilms, assemblages of polymeric compounds that play a crucial role in establishing infections. The biofilms of Fusarium species also contribute to high antifungal resistance. Using our collection of 29 clinical Fusarium isolates, we focused on characterizing differences in thermotolerance, anaerobic growth, and biofilm formation across four Fusarium species complexes commonly found in clinical settings. We investigated the role of carbon sources, temperature, and fungal morphology on biofilm development. Using fluorescence microscopy, we followed the stages of biofilm formation. Biofilms were screened for sensitivity/resistance to the antifungals voriconazole (VOR), amphotericin B (AmB), and 5-fluorocytosine (5-FC). Our findings revealed generally poor thermotolerance and growth under anaerobic conditions across all Fusarium species. VOR was more effective than AmB in controlling biofilm formation, but the combination of VOR, AmB, and 5-FC significantly reduced biofilm formation across all species. Additionally, Fusarium biofilm formation varied under non-glucose carbon sources, highlighting the species’ adaptability to different nutrient environments. Notably, early stage biofilms were primarily composed of lipids, while polysaccharides became dominant in late-stage biofilms, suggesting a dynamic shift in biofilm composition over time.

Properties of polyurethane foam/natural fibre composite for air conditioning insulation

ABSTRACT This study focuses on the fabrication of a biocomposite with insulating properties suitable for application in refrigeration pipe systems. The objective of this study was to utilise coconut husk and rice husk in a 1:1 ratio as reinforcement for flexible polyurethane foam. Biocomposites were made using hand mixing and casting technique reinforcement ratios of 5%, 10%, 15%, 20%, and 25% weight ratios from reinforcement husks. A thermal resistivity test, along with tensile test and water absorption measurements as a function of fibre content, was conducted according to ASTM standards. The study demonstrated that incorporating coconut and rice husks as reinforcement in polyurethane foam significantly improved the tensile properties of the composite material. The composite reinforced with 25% weight has been found to have highest tensile stress. In contrast, the thermal resistivity is observed to decrease as the fibre content is increased. A maximum thermal resistivity at 5% wt was found from the reinforcement. On the other hand, the amount of water absorption of the polymer compound increases with the increase in weight percentage of natural fibres. Based on these results, Flexible polyurethane foam reinforced with coconut husks and rice husks shows a promising solution for use as insulation for air conditioning pipes.

Physicochemical characterization of thermally oxidized rapeseed oil: An insight into combining acoustic diagnostic technique and chemometrics

This study aimed to apply an ultrasonic pulse-echo system to characterize thermally oxidized rapeseed oil. After 60 h of heating treatment (165 ± 5°C), the physicochemical (density, viscosity, acid value, iodine value and polar compounds) and acoustic properties (velocity, acoustic impedance, maximum amplitude of the first echo, difference in amplitude, and area under the curve) of rapeseed oil were measured. Support vector machine, random forest (RF), and backpropagation neural network algorithms were used to establish quantitative prediction models for viscosity and polar compounds based on the acoustic properties of rapeseed oil. The results indicated significant correlations between acoustic impedance and viscosity (R=0.70), as well as between acoustic impedance and polar compounds (R=0.79). Heating treatment reduced oil unsaturation and led to the formation of oxidative and polymeric compounds, which in turn increased the velocity and impedance, while decreasing the other three acoustic features. The RF model yielded the best performance in predicting viscosity (R2=0.7944) and polar compounds (R2=0.8385). These findings highlight that ultrasonic technology not only accurately predicts key quality parameters, but also provides a rapid, non-destructive, and cost-effective alternative to traditional methods for characterizing thermally oxidized rapeseed oil.

Disposable Face Masks into aquatic media: chemical and biological testing of the released compounds during the leaching process

The present study investigated the fate, and the biological effects posed by the presence of Disposable Face Masks (DFMs) into fresh- and saltwater media, using both chemical and biological testing. To this end, slightly fragmented DFMs were maintained in tanks with artificial sea water (ASW) or dH2O (DFMASW and DFMdH2O, respectively) for a period of 20 days (under continuous agitation, oxygen supply, and light/dark ration 1:1) to simulate both fresh- and saltwater natural conditions. Thereafter, DFMs leaching substances were determined, before proceeding to biological testing with the use of the marine bacterium Aliivibrio fischeri (Bioluminescence Inhibition assay), the fresh- and saltwater algal species Chlorococcum sp. and Tetraselmis suecica (algal bioassays), as well as the fairy shrimp Thamnocephalus platyurus, the water flea Daphnia magna, and the rotifer Brachionus calyciflorus (acute toxicity screening tests, in terms of microbiotest). According to the results, once into aquatic media (DFMASW and DFMdH2O) DFMs are subjected to degradation, leading to the release of organic, inorganic, and polymeric compounds (PP microfibers). Considering that possible interactions of the leaching substances could differentially affect the aquatic biota, the present study showed that DFMs leaching substances could be harmful to the fairy shrimp T. platyurus, and the water flea D. magna, with slight to non-toxic effects to be observed in case of Chlorococcum sp. and Tetraselmis suecica, the marine bacterium Aliivibrio fischeri, and the rotifer B. calyciflorus. The present findings showed that the DFMs improper disposal into fresh- and/or saltwater media, followed by their degradation and leaching processes, could lead to the release of substances of great environmental concern, thus promoting awareness about their proper handling and management, as well as the long-term monitoring of their environmental risk.

Edible Spoon and Edible Straw: Solusi Cerdik dalam Mengurangi Sampah Plastik di Jombang, Jawa Timur

Plastic is a polymer compound whose main constituent elements are carbon and hydrogen. Because it is difficult to decompose in nature, plastic is the biggest contributor to waste which causes damage to the natural balance. Based on data from the National Waste Management Information System (2023), Plastic waste is the second most common type of waste after food waste, as many as 41.1%. The solution to banning the use of plastic spoons and straws has been found by creating environmentally friendly spoons and straws that are edible and biodegradable. This biodegradable (Edible Spoon) uses wheat flour as a base so it is safe for consumption. Edible and biodegradable straws (Edible Straw) are also made from natural ingredients, namely cassava flour (mocaf) and cornstarch. The method used to produce Edible Straw is the fruit peel method. The method used to produce Edible Straw is the fruit peel method. This method is used to make Edible Straw dough from a mixture of dough and fruit which is mashed into a thin sheet resembling skin. This community service was carried out by STIKES PEMKBAB Jombang students with the aim of reducing the amount of plastic waste, especially plastic spoon and straw waste in Jombang.

The influence of pseudo-tetrahedral coordination environment of Co2+ ion in polymeric dimethylmalonates on the magnetic anisotropy and slow magnetic relaxation

The interaction of Co(NO3)2·6H2O and MI2CO3 (MI = Rb or Cs) with dimethylmalonic acid (H2Me2mal) leads to the formation of 3D polymeric compounds: {[Co4Rb8(Me2mal)8(H2O)8]·5H2O}n (1) and {[CoCs2(Me2mal)2(H2O)4]·H2O}n, respectively. The structures of 1 and 2 were characterized using X-ray diffraction analysis and IR spectroscopy. Each complex contains CoII atoms arranged in four vertex polyhedra. Both compounds exhibit field-induced slow magnetic relaxation. The dc-magnetic measurements and ab initio calculation results show that 1 has “easy plane” type of magnetization, where the axial parameter D of both crystallographicaly independent Co2+ ions is positive. In contrast, parameter D of 2 is negative, which corresponds to “easy axis” type. For 2 the relaxation process includes the Orbach mechanism, which corresponds to the quantum chemical calculation.

Characterization of Enterobacter cloacae CAUCoF_BF_01: an autochthonous heterotrophic nitrifying strain from culture ponds for biofloc applications

The biofloc environment needs specific heterotrophic nitrifying bacteria for optimal system performance, hence screening perfect bacterial strains is crucial. Enterobacter cloacae sp. was identified as a novel heterotrophic bacterium isolated from freshwater pond sediment during July, 2022. Through high-throughput sequencing, the isolated bacterium was identified as E. cloacae CAUCoF_BF_01, which demonstrated potential nitrogen removal via heterotrophic nitrification and aerobic denitrification, as well as a preference for different C/N ratios (C/N10, 15, 20, and 25) for consuming nitrogen sources. The bacteria performed superior (p < 0.05) ammonia-N and nitrite-N removal in C/N20, with efficiencies of 91.70% and 91.0%, respectively. C/N15, on the other hand, had higher nitrate-N removal efficiency (69.20%). Furthermore, the optimum temperature for the chosen strain was determined to be 30 °C. This strain, on the other hand, can thrive in temperatures ranging from 20 to 37 °C and pH levels ranging from 6 to 10. Furthermore, the biofilm test reveals that the selected bacterial strain has the potential to form biofilm via extracellular polymeric compound secretion, besides passing ecological safety requirement. The current investigation will be helpful in the development of a successful biofloc-based probiotic for managing system generated ammonia to an optimal level, as well as floc production to maximize system efficiency.

INCLUSION OF AZULENE STRUCTURAL UNITS IN THE BASIS OF CONJUGATED POLYMERS: IMPROVEMENT OF PROTON SENSITIVITY AND FLUORESCENCE

The growing interest in aromatic polymer compounds with an extended π-electron coupling system is explained by their importance as functional materials for organic optoelectronics. At present, much attention is paid to arylated, as well as substituted by electron acceptor and/or electron donor groups, aromatic and heteroaromatic compounds. One of the advantages of such conjugated aromatic systems is that they can fine-tune the electronic structure of materials in order to optimize their performance and morphology. In this regard, the structural isomer of naphthalene - azulene is of considerable interest. The nonalternant aromatic hydrocarbon azulene has unique electronic and spectral properties, including a polarized structure with a dipole moment of the order of 1,08 D and abnormal Anti-Kasha fluorescence S2→S0. The article discusses the synthesis of two fluorene-azulene π-conjugated copolymers using the modern methodology of organic synthesis as the Suzuki − Miyaura -cross−coupling reaction. It was shown that the interaction of 1,3-dibromazulene, as well as 2,7-Bis(3-bromoazulen-1-yl)-9,9-dioctyl-fluorene with 2,2'-(9,9-dioctyl-9H-fluorene-2,7-diyl)bis(1,3,2-dioxaborinane) under Suzuki − Miyaura cross-coupling conditions, azulene conjugate copolymers were synthesized: poly[2,7-(9,9-dioctylfluorenyl)-alt-(1ꞌ,3ꞌ - azulenyl)] and poly[1,3-bis(9ꞌ,9ꞌ-dioctylfluoren-2ꞌ-yl)azulenyl]-alt-[1ꞌꞌ,3ꞌꞌ - azulenyl]. It is revealed that neutral solutions of the obtained copolymers are nonfluorescent, but they become luminescent upon addition of trifluoroacetic acid. The «launching» of fluorescence occurs as a result of the formation of a 6 π-electron azulenyl cation, which rearranges the general electronic character of polymers, in particular, HOMO-LUMO levels and band gap. The obtained results demonstrate that the introduction of azulene units into a conjugated polymer framework has great potential for application as new protic functional materials.

Strategy and Advancement in Hybrid Hydrogel and Their Applications: Recent Progress and Trends

Advancements in polymers have made significant contribution in diverse application‐oriented fields. The multidisciplinary application of polymers generates a range of strategies, which is applicable in a wide range of biomedicines. Polymeric compounds such as hydrogels have been explored globally as a potent biomaterial that can furnish essential attributes due to their three‐dimensional (3D) soft and highly hydrophilic polymeric network. These hydrogels have been used extensively in various applications due to their biocompatible, biodegradable, and biosorption nature. However, they have some limitations, owing to their soft nature, low mechanical properties, and unsatisfactory degradation profile. Therefore, there is a need to develop novel, stronger, and more durable hybrid hydrogels with enhanced biocompatible and multifunctional properties. The current review gives a broad spectrum of hybrid hydrogels with its importance and significance. Further, the review highlights the strategies of generation of hybrid hydrogels reinforced with nanomaterials, biomaterials, and nanobiocomposites along with their advantages and disadvantages. The review also features various applications of these hybrid hydrogels in the field of biomedicines, photocatalysis, agriculture, and food industry over the last 5 years. This review will give a comprehensive overview to researchers working in the field of hybrid hydrogels development.

Theoretical Investigation of Para‐Substituted Aniline Based Dendritic Architecture: In‐Silico ADMET, DFT, and Machine Learning Approach

AbstractDendrimers are polymeric compounds which exhibit notable advantages, particularly in medicinal chemistry. The therapeutic potential of these molecular architectures can be screened through in silico method which facilitates the identification of the ones with the highest potential for further investigation. Here, we have reported the in silico investigation of a series of dendritic architecture based on para‐substituted aniline. Density functional theory (DFT) method was employed to optimize the structures and to analyze the quantum chemical parameters. The absorption, distribution, metabolism, excretion, and toxicity (ADMET) profiling was additionally assessed, which unveiled favorable drug‐like characteristics and moderate to good bioactivity across all compounds. Utilizing the drug‐likeness property in machine learning techniques, the potential for predicting novel drug‐like dendrimers was explored.

Toxicokinetic Profiles and Potential Endocrine Disruption Effects at the Reproductive Level Promoted by Siloxanes Used in Consumer Products.

Siloxanes, commonly known as silicones, are polymeric compounds made up of silicon and oxygen atoms bonded together alternately. Within this group of substances are linear methyl-siloxanes and cyclic methyl-siloxanes, with octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5) being the most produced and used industrially. Due to their versatility, high production volume, stability, and local presence in environmental matrices and biological fluids such as breast milk, fat, and plasma, siloxanes have been considered persistent organic pollutants, representing a public health problem. This represents a public health concern, especially when different investigations have reported potential endocrine effects at the reproductive level in experimental animals exposed to D4 and D5. The objective of this study was to review the potential reproductive and endocrine effects derived from siloxanes present in personal care products (PCPs). The results of the literature review confirmed that D4 and D5 were the most used siloxanes as additives in PCP because they improve the emollient properties of the cosmetic and the physical appearance of hair and skin. Similarly the toxicological effects of siloxanes, particularly D4, D5, and D6 included significant endocrine disruption, reproductive toxicity, and liver toxicity. Studies in SD and F-344 rats, commonly used to assess these effects, have shown that D4 has low estrogenic activity, binding to ER-α receptors, whereas D5 does not bind to estrogen receptors. D4 exposure has been associated with increased uterine weight and estrous cycle alterations, leading to prolonged exposure to estrogens, which raises the risk of endometrial hyperproliferation and carcinogenesis. Recent research highlights that D5 exposure disrupts follicle growth, endometrial receptivity, and steroidogenesis, resulting in infertility and hormonal imbalances, potentially causing disorders like endometriosis and increased cancer risk. Chronic exposure to D5 has been linked to the development of uterine endometrial adenocarcinoma, with higher doses further elevating this risk.

Simultaneous construction of Zr-β zeolite with high content and high accessibility of framework Zr sites in the conversion of ethanol to 1,3-butadiene: Mechanisms and synergistic effects

Metallosilicate zeolites, represented by Zr-β zeolite, possess unique porosity and tunable acidity, showing great potential in the conversion of ethanol to 1,3-butadiene. However, there still remains potential for further improvement of catalytic activity and stability by breaking the bottleneck framework metal site content and microporosity diffusion. In this paper, a novel Zr-β zeolite with both high content and high accessibility of framework Zr sites was successfully synthesized via the combination strategy of “Improved Decomposition Reconstruction” and “Silanization.” Based on the activity evaluation experiments of key reaction steps and in situ DRIFTS in the conversion of ethanol to 1,3-butadiene, the enhanced activity and stability are due to the synergistic effects of the content and accessibility of framework Zr sites, which both facilitate reactant conversion and inhibit the covering of active sites or the plugging of pore channels by polymerized heavy compounds. The prepared zeolite demonstrates excellent performance with a total conversion of 66 % and a 1,3-butadiene selectivity above 67 % in 100 h, along with good regenerability.

N-Oxide Coordination to Mn(III) Chloride.

We report on the synthesis and characterization of Mn(III) chloride (MnIIICl3) complexes coordinated with N-oxide ylide ligands, namely trimethyl-N-oxide (Me3NO) and pyridine-N-oxide (PyNO). The compounds are reactive and, while isolable in the solid-state at room temperature, readily decompose into Mn(II). For example, "[MnIIICl3(ONMe3)n]" decomposes into the 2D polymeric network compound complex salt [MnII(µ-Cl)3MnII(µ-ONMe3)]n[MnII(µ-Cl)3]n·(Me3NO·HCl)3n (4). The reaction of MnIIICl3 with PyNO forms varied Mn(III) compounds with PyNO coordination and these react with hexamethylbenzene (HMB) to form the chlorinated organic product 1-cloromethyl-2,3,4,5,6-pentamethylbenzene (8). In contrast to N-oxide coordination to Mn(III), the reaction between [MnIIICl3(OPPh3)2] and 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) resulted in electron transfer-forming d5 manganate of the [TEMPO] cation instead of TEMPO-Mn(III) adducts. The reactivity affected by N-oxide coordination is discussed through comparisons with other L-MnIIICl3 complexes within the context of reduction potential.

Phytochemical Screening, Nutritional Properties and Biological Activities of Sweet and Conventional Potato Planted in Morocco

This study aimed at studying phytochemical composition, nutritional properties and biological activities (antioxidant and anti-inflammatory) of two potato varieties (sweet potato (SP): Ipomoea batatas L. and conventional potato (CP): Solanum tuberosum L.) planted and consumed in Morocco. For this, potato samples (SP and CP) were firstly subjected to phytochemical and nutritional analysis, including water content, total and reducing sugars, proteins, lipids, vitamin C, carotenoids, phenolic compounds and flavonoids. Secondly, phenolic compounds extracts were subjected to biological activities namely antioxidant and invitro anti-inflammatory. Potato extracts antioxidant activity was tested by DPPH and total antioxidant capacity (TAC) methods. Proteins and lipids contents were found much higher in SP (5.21 ± 0.26 and 0.29 ± 0.02 g/100g DW) respectively than in CP (2.93 ± 0.15 and 0.11 ± 0.01 g/100g DW) respectively. Besides, total and reducing sugars contents were 16.65 and 2.53 g/100g DW in the CP, and 12.47 and 2.13 g/100g DW in the SP, respectively. The antioxidant activity of different SP extracts was found to be higher than those of CP, by using DPPH and TAC methods. These findings could be explained by SP richness in carotenoids (212 ± 10.60 mg/100g DW), phenolic compounds (130.11 ± 6.51 mg GAE/100g DW), flavonoids (85.03 ± 4.2 5mg QE/100g DW) and vitamin C (471.33 ± 23.57 mg/100g DW). Exclusion chromatography done by Sephadex G50 showed that polymeric phenolic compounds in SP were more abundant when compared to monomeric ones. This difference was consistent with the anti-inflammatory activity assessed in vitro.

Research Progress on Immunomodulatory Effects of Poly (Lactic-co- Glycolic Acid) Nanoparticles Loaded with Traditional Chinese Medicine Monomers.

Immunomodulatory mechanisms are indispensable and key factors in maintaining the balance of the environment in humans. When the immune function of the immune system is impaired, autoimmune diseases occur. Excessive body fatigue, natural aging of the human body, malnutrition, genetic factors and other reasons cause low immune function, due to which the body is prone to being infected by bacteria or cancer. Clinically, the existing therapeutic drugs still have problems such as high toxicity, long treatment cycle, drug resistance and high price, so we still need to explore and develop a high efficiency and low toxicity drug. Poly(lactic-co-glycolic acid) (PLGA) refers to a nontoxic polymer compound that exhibits excellent biocompatibility. Traditional Chinese medicine (TCM) monomers come from natural plants, and have the characteristics of high efficiency and low toxicity. Applying PLGA to TCM monomers can make up for the defects of traditional dosage forms, improve bioavailability, reduce the frequency and dosage of drug use, and reduce toxicity and side effects, thus having the characteristics of sustained release and targeting. Accordingly, PLGA nanoparticles loaded with TCM monomers have been the focus of development. The previous research on drug loading advantages, preparation methods, and immune regulation of TCM PLGA nanoparticles is summarized in the following sections.

Fischer-Tropsch Hydrocarbons as Processing Aides in Injection Molding

Polymer producers and converters are continuously evaluating options to reduce costs by producing faster, reducing energy consumption, reducing scrap and improving finished article mechanical and aesthetic properties. Recently, however, sustainability and overall environmental impact have also become prominent themes for converters. Processing aides are commonly used in blown film extrusion and injection molding. Specifically in injection molding silicone spray, fluoropolymers and oleochemicals are used. An alternative is to use higher molecular weight Fischer-Tropsch (FT) hydrocarbons as a polymer processing aide and mold release agent due to its good compatibility with the polymer compound matrix. Formulating with these hydrocarbons allows the converter to reduce cycle time, produce faster to reduce labor, to reduce energy consumption and improve certain properties of the injection molded article. Ultimately FT as a polymer processing aide could be an important tool to a converter to reduce manufacturing costs and improve quality.

Synergetic experimental and theoretical investigation of molecular structure – Optical properties relationships of anthrazoline-based polymeric chains

The photoluminescence and UV–Vis absorption spectra of copolyamides containing 1,9-anthrazoline with para- and meta-[(substituted carbonyl)amino]phenyl-1-ene moieties in a polymer backbone were studied by a combination of experimental and theoretical approaches. The investigation was accomplished through time-dependent density functional theory electronic structure calculations of small-molecule models mimicking a polymer chain. Theoretical absorption and luminescence spectra of ten atomistic models were compared with corresponding experimental data, and the optical properties of two new luminescent molecules with bromine auxochrome were predicted. An analysis of the optical properties demonstrate an identical effect of the type and position of a substituent on the spectra for para- and meta-[(substituted carbonyl)amino]phenyl-1-ene moieties. It was found that the absorption and luminescence spectra of theoretical para-models demonstrate red shifts relative to the corresponding meta-ones. The same phenomenon was observed in experimental spectra of low-molecular-mass compounds and corresponding copolyamides in solution and bulk. Unique optical properties allow anthrazoline-based polymer compounds to be used in numerous advanced optoelectronic applications with desired optical and electronic characteristics.