Composite Sponge Research Articles

Novel Collagenous Sponge Composites for Osteochondral Regeneration in Rat Knee Models: A Comparative Study of Keratin, Hydroxyapatite, and Combined Treatments

Novel Collagenous Sponge Composites for Osteochondral Regeneration in Rat Knee Models: A Comparative Study of Keratin, Hydroxyapatite, and Combined Treatments

Biodegradable genipin cross-linked chitosan/pea protein isolate sponges for effective adsorption of methyl blue: Batch experiments and quantum chemical analysis

This study successfully prepared double crosslinked chitosan (CS) and pea protein isolate (PPI) composite sponges using genipin as a crosslinking agent and investigated their effectiveness as an adsorbent for methyl blue (MEB) in aqueous solutions. The composite sponges were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller measurement, swelling tests, gel fraction measurement, zeta potential, and X-ray diffraction. Additionally, the effects of genipin content, pea protein isolate content, sponge dosage, initial pH of the solution, adsorption time, dye concentration, and adsorption temperature on dye removal ability were studied. The results showed that at pH 3.0 and a dye concentration of 100 mg/L, the adsorption capacity of the sponge for methyl blue was found to be 351.6 mg/g. At 298 K and after 720 min, with a dye concentration of 700 mg/L, the maximum adsorption capacity of the sponge for methyl blue reached 959.3 mg/g. The adsorption process follows a pseudo-second-order kinetic model and a Langmuir isotherm. Theoretical analysis using density functional theory suggests that the adsorption of methyl blue by the composite sponge is attributed to the anionic sulfonic acid group of the dye. The composite sponge degraded 76.1 % after being buried in soil for 21 days. This study reveals the enormous potential of biodegradable chitosan-protein-based sponges in effectively removing methyl blue dye pollutants from wastewater.

Adsorption and removal of Pb (II) via layer double hydroxide encapsulated with chitosan; synthesis, characterization adsorption isotherms, kinetics, thermodynamics, & optimization via Box-Behnken design

The study aimed to enhance the stability and efficiency of removing bivalent Pb(II) by encapsulating AlNi-layered double hydroxide (LDH) in chitosan and itaconic acid to create an adsorbent with chemically active sites. The resulting material, AlNi-LDH/CS, underwent thorough property analysis using XRD, FT-IR, XPS, EDX, N2 adsorption/desorption isotherm, and FESEM to find out what textural characteristics it has. Specifically, nitrogen adsorption/desorption isotherms were utilized to assess the textural properties of AlNi-LDH/CS. The Al/Ni-LDH/CS surface displayed a specific surface area of 71.95 m2/g and an average pore size of 2.537 nm, consistent with the platelets' external surface. The effects of dose, pH, temperature, and starting concentration on the adsorption process were also investigated in this study. The adsorption characteristics have been examined by means of equilibrium and adsorption kinetics. The adsorption process adhered to the pseudo-second-order and Langmuir isotherm models. The predominant adsorption process was found to be chemisorption, which had an adsorption energy of 28.42 kJ·mol−1. An endothermic and spontaneous adsorption process is suggested by the increase in metal absorption at increasing temperatures. The Box-Behnken design software was utilized to establish the optimal adsorption parameters as pH 5, a dosage of 0.2 g of AlNi-LDH/CS per 25 mL, and an adsorption capacity of 453.05 mg/g for the Pb(II) arsenate solution. For the composite sponge to be most effective in adsorbing arsenate and be used in water purification procedures, these factors are essential. The adsorption process was successfully improved with few planned tests by applying the Box-Behnken design and response surface technique aspects of the Design-Expert software. An evaluation of the adsorbent's reusability using six successive cycles of adsorption and desorption confirmed its stability and showed no discernible decrease in removal efficiency. Additionally, it retained its original chemical composition before and after reuse, showcased consistent efficiency, and maintained uniform XRD data.

Highly-selective and well-effective removal of cesium ions by segregative titanium-ferrocyanide/chitosan melamine sponge composite

Selectively and efficiently removing Cs is of great urgency and challenge for the treatment of radioactive wastewater. In this work, titanium-ferrocyanide/chitosan melamine sponge composite (TFCM) was synthesized by cross-linking and titanium-doping strategy, and employed to remove Cs+ from water. The obtained TFCM exhibited excellent adsorption performance for Cs+, due to its porous and 3D skeleton structure. The TFCM demonstrated a broad range of pH (pH = 3–11) suitability and high removal ratio of Cs+. The adsorption behavior of TFCM on Cs+ conformed to the Langmuir adsorption process and pseudo-second-order kinetics model. Remarkably, TFCM displayed a high selectivity in Cs+ adsorption with the presence of other cationic (K+, Na+, Ca2+, Mg2+). TFCM could easily be separated from water because of loading on the melamine sponges. Besides, the TFCM could maintain more than 78.1 % removal ratio of Cs+ after five adsorption-desorption cycles. Furthermore, the concentration of Cs+ could decrease to 10 μg/L from 20 mg/L with a prominent removal ratio of 99.95 %. Characterization results revealed that the adsorption process of Cs+ by TFCM was dominated by ion-exchange. In summary, the TFCM is a high selectivity, efficiently and easily separable adsorbent with excellent application prospects for removing Cs from radioactive wastewater.

Development of colorimetric probe using robust zinc-MOF and its consistent melamine sponge composite: Instantaneous N3–, La3+ sensing and degradation applications

The crystalline sponge method (CSM), which involves soaking a target molecule into a crystalline metal-organic framework (MOF), offers a promising approach by eliminating the need for high-quality single crystals of the target compound. To broaden the scope of compounds that can be analyzed using CSM, it is essential to investigate various MOFs. In this study, we focused on evaluating the potential of a zinc-based MOF, specifically [Zn3(Cei)2((Bimb)3] (Zinc-MOF), as a CSM host. We successfully synthesized and thoroughly characterized Zinc-MOF. Additionally, we developed a Zinc-MOF@melamine sponge (Zinc-MOF@MS) composite, which exhibited significant photocatalytic activity by degrading hazardous organic dyes such as Rose Bengal (RB) and Crystal Violet (CV), achieving degradation efficiencies of 98.95 % and 92.51 %, respectively, after 120 min of exposure to visible sunlight. The luminescent properties of the Zinc-MOF were also explored, demonstrating strong luminescent emission and excellent chemical stability. Furthermore, Zinc-MOF showed remarkable sensing capabilities, selectively detecting La³⁺ cations and N₃⁻ anions in aqueous solutions through luminescence quenching.

The impact of coral reef habitat and microbial abundance status on sponge-associated prokaryotic communities

AbstractSponges are one of the oldest lineages of animals on Earth and play key roles in shaping marine ecosystems. They are diverse, with more than 9600 species known to science, and come in a wide range of shapes, sizes, and colours. Sponges are, furthermore, known to host diverse communities of microbial symbionts, which play important roles in their physiology and ecology. In the present study, we sampled prokaryotic communities from 24 sponge species inhabiting coral reef flat and slope habitats off the coast of SW Celebes (Indonesia) in addition to sediment and seawater. The prokaryotic profiles of several sponge species were characterised for the first time. In line with previous studies, we revealed pronounced variation in diversity and composition among species with high microbial abundance (HMA) or low microbial abundance (LMA) status playing an important role in structuring prokaryotic communities across host sponge species. In addition to this, reef habitat (flat versus slope) also played a significant role in structuring prokaryotic communities. Most species in the reef slope habitat housed prokaryotic communities with a consistent profile of several cyanobacterial and prokaryotic OTUs, whereas these OTUs were largely absent from sponges inhabiting the reef flat habitat. Instead, they tended to house highly abundant bacterial populations related to the Synechococcus spongiarum group. We propose that specific strains of S. spongiarum may play a key role in enabling their host sponges to survive in an, otherwise, inhospitable environment (e.g., high irradiance and temperature) and, thus, help to explain differences in sponge composition between coral reef flat and slope habitats.

Effective synthesis and characterization of citric acid cross-linking of modified ferrous metal-organic framework and chitosan nanocomposite sponge for Th(IV) elimination: Adsorption isotherms, kinetic analysis, and optimization by Box-Behnken design

This research presents a novel nanocomposite of ferrous metal-organic framework (Fe(II)-MOF) that has been encapsulated with chitosan matrix, leading to the development of a new adsorbent referred to as NH2-Fe(II)-MOF@CSC composite sponge. This composite sponge has shown effectiveness in removing radioactive thorium (IV) contamination from water sources. The adsorbent underwent characterization using techniques including FTIR, PXRD, BET analysis, and SEM. The adsorbent has a high surface area of 1360.8 m2/g. The most effective conditions for adsorbing Th(IV) were found to be a pH of 5, using 0.02 g of adsorbent dose per 25 mL, and maintaining a contact time of 100 min. The composite sponge demonstrated an impressive maximum adsorption capacity of 618.8 mg/g for Th(IV). The adsorption process was fitted to Langmuir isothermally and kinetically fitted to pseudo-second-order. Nonetheless, the relatively low adsorption energy of 6.22 kJ/mol suggests that the main adsorption mechanism is physisorption, which is marked by weaker van der Waals forces. This discovery could have implications for the material's potential for easy regeneration. In the analysis of the influence of temperature on the adsorption of Th(IV), it was discovered that the adsorption process is endothermic because the positive ΔHo value was 24.48 kJ.mol−1. Furthermore, a positive ΔSo value of 87.46 J.mol−1 K−1 suggests the existence of disorder at the solid-solution interface. Conversely, a temperature rise resulted in a higher negatively charged ΔGo, indicating that the adsorption process is spontaneous. The research also examined the mechanism of interaction, such as π-π interaction, hydrogen bonding, pore filling, and electrostatic interaction. It was noted that the adsorbent can be efficiently used for a maximum of six cycles, demonstrating its economic viability. The adsorption outcomes were optimized using the Box Behnken design (BBD).

Corn stalk decorated with magnetic graphene oxide as an efficient adsorbent for the removal of cationic dye from wastewater

In this study, an in situ immersion loading method is employed to introduce graphene oxide (GO) nanosheets and hollow copper ferrite nanospheres into the ordered porous structure of alkali-activated corn stalk (CS). This approach facilitates the construction of a novel magnetic three-dimensional composite sponge (GO/CS/CuFe2O4) utilized for the efficient removal of methylene blue (MB) and malachite green (MG) dyes from wastewater samples. In this hybrid adsorbent, the stacking of GO nanosheets is inhibited due to the ordered porous structure of CS, based on which GO nanosheets are well immobilized and dispersed. In addition, the hollow CuFe2O4 nanospheres and GO nanosheets support each other, further reducing the accumulation of GO, and increasing the specific surface area of the adsorbent. The engineered morphology of GO/CS/CuFe2O4 sponges supports the maximum exposure of the active adsorption sites to the dye solution, promoting the adsorption process. Microscopy and surface analyses show that GO/CS/CuFe2O4 sponges have a rich pore structure with the specific surface area of 289.85 m2·g−1, more than 17 times higher than that of CS, significantly improving their adsorption performance for MB and MG. The maximum adsorption capacity of GO/CS/CuFe2O4 for MB and MG is as high as 243.65 and 231.53 mg/g, respectively, superior to those of many other biomass-based adsorbents. The dye adsorption performance of GO/CS/CuFe2O4 can be well described by the Langmuir adsorption isotherm and pseudo-second-order kinetic model, suggesting the existence of strong monolayer chemisorption. The FTIR and X-ray photoelectron spectroscopy (XPS) analyses show that the dye removal mechanisms observed mainly includ π-π interactions, hydrogen bonding, electrostatic interactions and pore filling. In addition, GO/CS/CuFe2O4 sponges exhibit an excellent magnetic behavior (Ms = 49.52 emu/g), enabling the adsorbent to be recycled by the application of a magnetic field. The adsorption capacities of the adsorbent for MB and MG remain 88.6 % and 90.2 % of the initial adsorption capacity, respectively, even after 10 regeneration cycles, showing its excellent reusability performance. Finally, GO/CS/CuFe2O4 is applied for the removal of MB and MG from real aqueous environments comprising the seawater, tap water and wastewater treatment plant effluent, and the removal rates are observed to be over 90 % of that achieved in deionized water. This study provides new concepts for the sustainable utilization of agricultural waste and natural structure of plants to purify dye containing wastewater.

Developing a multifunctional chitosan composite sponge for managing traumatic injuries

Developing porous hemostatic sponges that are both biosafe and multifunctional remains a complex challenge. Conventional hemostatic techniques often fall short in managing bleeding effectively, leading to severe critical cases such as suboptimal hemostasis, increased infection risk, and complications arising from profuse bleeding. To address these deficits, our study introduces a novel multifunctional nanocomposite sponge that synergistically incorporates chitosan (CS), cellulose (Cel), graphene oxide (GO), and silver (Ag) nanoparticles. The resulting CS/Cel/GO/Ag developed demonstrates a swelling rate exceeding 3000 %, an absorption rate of over 2100 %, and the lowest stress surpassing 20 kPa at an initial 80 % strain. In vitro analyses reveal that the CS/Cel/GO/Ag sponge has excellent cytocompatibility, non-hemolytic nature, and competence in blood cell adherence and bacterial inhibition. In vivo evaluations further demonstrate that compared to conventional hemostatic methods, the sponge substantially enhances hemostatic efficacy, as evidenced by the marked reductions in clotting times and diminished blood loss compared to conventional hemostatic methods. Specifically, the test results of the CS/Cel/GO/Ag sponge across three different models are as follows: for the rat tail amputation model, the clotting time was 99 s, while blood loss was 222 mg; for the rat liver injury model, the clotting time was 129 s. while blood loss was 812 mg; for the rat femoral artery laceration model, the clotting time was 96 s, while blood loss was 758 mg. The compelling attributes of the CS/Cel/GO/Ag sponges position them as a promising solution for the acute management of bleeding. Their excellent performance indicates they have potential role to play in trauma care.

Amoxicillin-laded sodium alginate/cellulose nanocrystals/polyvinyl alcohol composite nanonetwork sponges with enhanced wound healing and antibacterial performance

Wound healing is a complex process and reuires a long repair process. Poor healing effect is normally a challenge for wound healing. Designing sponge dressings with drug-assisted therapy, good breathability, and multiple functional structures effectively promotes wound healing. In this work, a flexible amoxicillin-laded (AMX) sodium alginate (SA)/cellulose nanocrystals (CNCs)/ polyvinyl alcoho (PVA) (SA/CNCs/PVA-AMX, SCP-AMX) wound dressing was designed and built with an excellent porous structure, suitable porosity, and anti-bacterial properties for promoting wound tissue reparation. The porous structure of the wound dressing was fabricated by freeze-thawing cyclic and freeze-dried molding process. This wound dressing exhibited a 3D porous structure for soft-tissue-engineering application, including high porosity (84.2%), swelling ratio (1513%), tensile strength (1.79 MPA), and flexibility. With the inhibition zones of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) being 1.96 and4.58 cm, respectively, this wound dressing demonstrated good antibacterial activity against E. coli and S. aureus. More importantly, wound healing assay in vivo indicates that SCP-AMX could inhibit wound infection, promote collagen deposition, reduce inflammation, and accelerate granulation tissue and wound healing. Thus, the reported wounding dressings present excellent biocompatibility, high antibacterial activities, and excellent biosafety with great potential in wound healing applications.

Chitin-Assisted Synthesis of CuS Composite Sponge for Bacterial Capture and Near-Infrared-Promoted Healing of Infected Diabetic Wounds.

Diabetic wounds are prone to recurrent infections, often leading to delayed healing. To address this challenge, we developed a chitin-copper sulfide (CuS@CH) composite sponge, which combines bacterial trapping with near-infrared (NIR) activated phototherapy for treating infected diabetic wounds. CuS nanoparticles were synthesized and incorporated in situ within the sponge using a chitin assisted biomineralization strategy. The positively charged chitin surface effectively adhered bacteria, while NIR irradiation of CuS generated reactive oxygen species (ROS) heat and Cu2+ to rapidly damage the trapped bacteria. This synergistic effect resulted in an exceptional antibacterial performance against E. coli (∼99.9%) and S. aureus (∼99.3%). The bactericidal mechanism involved NIR-induced glutathione oxidation, membrane lipid peroxidation, and increased membrane permeability. In diabetic mouse models, the CuS@CH sponge accelerated the wound healing of S. aureus infected wounds by facilitating collagen deposition and reducing inflammation. Furthermore, the sponge demonstrated good biocompatibility. This dual-functional platform integrating bacterial capture and NIR-triggered phototherapy shows promise as an antibacterial wound dressing to promote healing of infected diabetic wound.

The effect of mesoporous bioglass on hemostatic, antibacterial and biocompatible properties of composite sponge

AbstractHemostatic materials used in penetrating injuries or incompressible wounds must possess exceptional efficacy in preventing bleeding. In this study, mesoporous bioglass (MBG) was synthesized using a two‐step acid‐catalyzed self‐assembly method, and a novel hemostatic sponge (MBG/CH/GEL) was prepared by combining chitosan (CH), gelatin (GEL), and MBG using a freeze‐drying method. The characteristics and hemostatic effects of the MBG/CH/GEL composite hemostatic sponge were analyzed and evaluated. Research has shown that the high specific surface area of MBG (730 m2/g) provides more blood cell adhesion sites during hemostasis, resulting in a low hemolysis rate, favorable swelling rate, and porosity of the hemostatic sponge. Additionally, MBG can release Si4+ and Ca2+ ions during hemostasis, giving the composite hemostatic sponge excellent cell compatibility and promoting cell growth. Compared with commercially available gelatin hemostatic sponges, it cannot only quickly stop bleeding but also has a greater compressive strength (212.07 kPa) and adhesion strength (11.54 ± 0.16 kPa), making it suitable for use in hemostasis of incompressible wounds. Furthermore, the composite hemostatic sponge exhibited significant antibacterial effects against Staphylococcus aureus and Escherichia coli. These results indicate that the MBG/CH/GEL composite hemostatic sponge, which is a hemostatic material, has promising applications.

A facile way to fabricate a thrombin immobilized composite sponge with dual hemostatic effects for acute hemorrhage control

Uncontrolled bleeding and excessive blood loss stand as the leading causes of death in complex surgeries, civilian traumas, and military operations. Sponges have been used for developing efficiency hemostats, but most commonly used hemostatic sponges possess only one single coagulation mechanism or lack inherent blood clotting ability. Herein, we proposed simple yet innovative approaches for creating novel hemostatic composite sponges with dual hemostatic effects. Bacterial cellulose (BC) was first introduced into polyvinyl alcohol (PVA) matrix to develop a BC/PVA (CP) sponge featuring a unique cellulose-embedded porous network structure and desirable properties. Subsequently, thrombin was immobilized on CP through an easy method that combines physical adsorption and covalent binding to fabricate thrombin-carrying CP (TCP) composite sponges. The resulting composites boasted a highly porous structure, outstanding liquid-absorption capacity, low hemolysis rate, and superior biocompatibility. In vitro clotting tests revealed that TCP displayed potent coagulation capabilities, a rapid blood absorption rate, and the ability to stimulate and activate blood components along with the coagulation cascade. In vivo hemostatic assessments further confirmed that TCP offered high hemostatic efficiency and multifaceted hemostatic effects, making it suitable for the management of acute and severe bleeding.

Self-expanding cellulose sponge with enhanced hemostatic ability by tannic acid/metal ion composite coating for highly effective hemostasis of difficult-to-control bleeding wounds

Refractory bleeding presents a critical, life-threatening challenge, and the goal of medical professionals and researchers has always been to achieve safe and effective hemostasis for bleeding wounds. In this study, we utilized the benefits of a self-expanding cellulose sponge to control incompressible bleeding, which is achieved this by creating a tannic acid/metal ion coating on the surface and within the pores of the sponge to improve its hemostatic effectiveness. The effects of various types and concentrations of metal ions (calcium, magnesium, iron, and zinc) on hemostatic efficiency and biosafety is systematically investigated. The results from bacteriostasis and in vitro coagulation experiments identified 0.3 wt% Fe3+ as the optimal metal ion coating. Scanning electron microscope energy spectrum analysis confirmed the uniform distribution of Fe3+ within the cellulose sponge. Furthermore, the in vivo and in vitro results demonstrated that the prepared tannic acid/Fe3+ coated composite hemostatic sponge exhibits excellent coagulation ability and biocompatibility. Both the bleeding time and theblood loss in two bleeding models are significantly reduced, showing promising potential for treating extensive surface bleeding and deep penetrating wounds. Furthermore, the straightforward preparation method for this composite hemostatic sponge facilitates additional research towards market application.

Nanocellulose-assisted construction of multi-cavity structured Ti3C2Tx/melamine composite sponges for enhanced electromagnetic interference shielding

The deposition of Ti3C2Tx nanosheets onto an ultralight melamine sponge (MS) holds great appeal for constructing mechanically robust and high-performance electromagnetic interference (EMI) shielding composites. However, the full potential of Ti3C2Tx materials for shielding performance is impeded by the insufficient affinity between Ti3C2Tx nanosheets and MS. Herein, with the assistance of cellulose nanofibers (CNF), large-sized single-layer Ti3C2Tx nanosheets were firmly attached to the MS skeleton and enveloped the pores. The obtained Ti3C2Tx/MS composite sponges exhibit a unique multi-cavity structure. Moreover, hydrophobic modification was applied to the composites through the use of two-component silane coupling agents. The silane-modified multi-cavity structured composite sponges demonstrate significant enhancements in conductivity, mechanical strength, and environmental stability. Particularly, the incorporation of 17 wt% CNF leads to a 29.3 dB increases in shielding efficiency (SE) for the composite sponge. The enhancement can be attributed to the high reflectance of electromagnetic waves due to the highly conductive Ti3C2Tx/CNF cavity-membranes, the multiple internal reflections within the multi-cavity structure, and the improved interfacial polarization loss capability facilitated by the abundance of MXene-CNF interfaces.

Nature-Based Solutions for Landscape Performance Evaluation—Handan Garden Expo Park’s “Clear as a Drain” Artificial Wetland as an Example

As a technology for water landscape performance that considers landscape, ecological, and social effects, nature-based solutions play a crucial role in enhancing the functionality of integrated ecosystem services on the micro-scale. This study conducted a systematic investigation into the landscape performance of the “Clear as a Drain” composite sponge facility at Handan Garden Expo Park. The following conclusions were drawn: (1) In terms of ecological restoration support services, the “Clear as a Drain” artificial wetland exhibited diverse habitat types, a rich variety of plant species specific to the site’s region, and high plant diversity indices for shrubs (1.776) and herbaceous aquatic plants (3.352). Reclaimed water reused in the artificial terraced wetland promoted plant growth and diversity while contributing to site self-rehabilitation; plants also significantly contributed to carbon fixation, oxygen release, and carbon emission reduction. (2) Regarding ecological restoration regulation services, the artificial wetland effectively purified reclaimed water with substantial improvements observed in incoming water quality during spring, summer, and autumn—particularly notable purification effects were observed during the summer months. Pollutant reduction rates for COD, BOD5 ammonia nitrogen, TP, and TN reached 75.8%, 72.1%, 93.8%, 96.7%, and 90.3%, respectively; different independent subsystems within the wetland demonstrated distinct advantages in pollutant removal; park plants displayed strong air purification capabilities; annual energy savings from park plants could fully cover daily energy consumption for nearby residents. This case could serve as guidance for scientific management and design parameter optimization of other composite sponge facilities.

Enhancing methyl violet 2B pollutant removal from wastewater using Al-MOF encapsulated with poly (itaconic acid) grafted crosslinked chitosan composite sponge: Synthesis, characterization, DFT calculation, adsorption optimization via Box-Behnken Design

In this research, aluminum metal-organic framework encapsulated with poly (itaconic acid) grafted crosslinked chitosan composite sponge (Al-MOF@PIC) was prepared. SEM, FTIR, XPS, XRD, and BET techniques were employed to thoroughly characterize the synthesized material and establish its structure and characteristics. The study discovered that the Al-MOF@PIC is an efficient way to remove dyes, which constitute a significant number of contaminants in industrial wastewater. Subsequently the adsorption of methyl violet 2B (MV-2B) dye, the surface area, pore size, and pore volume of the adsorbent decreased from 1860.68 m2/g, 1.62 nm, and 1.52 cc/g to 1426.45 m2/g, 1.11 nm, and 0.92 cc/g, individually. This modification suggested that a portion of the MV-2B dye had been removed by adsorption over the adsorbent's pores. The excellent adsorption capacity of the material was further confirmed by batch adsorption tests, which displayed a maximum adsorption capability of 646.76 mg/g for the elimination of MV-2B dye. The high adsorption energy of 26.8 kJ/mol designates that chemisorption is primarily responsible for MV-2B dye adsorption against the sponge adsorbent. The Al-MOF@PIC composite sponge demonstrated exceptional reusability over six cycles, demonstrating its strength and durability. The Al-MOF@PIC composite sponge successfully removes MV-2B from water by pore filling, π-π stacking, hydrogen bonding, and electrostatic interactions, which are the key mechanisms behind the adsorption of the dye pollutant. Its potential for practical applications is further demonstrated using Box Behnken-design (BBD) to optimize the adsorption consequences.

Synthesis and characterization of a novel TiO2@chitosan/alginate nanocomposite sponge for highly efficient removal of As(V) ions from aqueous solutions: Adsorption isotherm, kinetics, experiment and adsorption mechanism optimization using Box-Behnken design

This research uses a novel TiO2@CSC.Alg composite sponge was created by encasing TiO2 nanoparticles in the natural polymers alginate and chitosan, resulting in a nanocomposite that is both ecologically friendly and biocompatible. Using the generated nanocomposite as a new environmentally friendly adsorbent, As(V) heavy metal ions were effectively removed from aqueous media. The following techniques were used to analyse the physicochemical properties of the obtained materials: pHZPC, FTIR, XRD, BET, SEM, and XPS. Utilizing nitrogen adsorption/desorption isotherms, the TiO2@CSC.Alg composite sponge's textural properties were identified. This revealed a BET surface area of 168.42 m2/g and a total pore volume of 1.18 cc/g, indicating its porous nature and potential for high adsorption capacity. Examine the effects of temperature, pH, dose, and beginning concentration on adsorption. The adsorption characteristics were determined based on equilibrium and adsorption kinetics measurements. The adsorption process was both pseudo-second-order (PSOE) and Langmuir isothermally fit. Chemisorption was the adsorption method since the adsorption energy was 25.45 kJ·mol−1. An endothermic and spontaneous adsorption process was indicated by more metal being absorbed as the temperature increased. The optimal conditions for adsorption were optimized via Box-Behnken design software to be pH of 5 in the solution, a dosage of 0.02 g of the TiO2@CSC.Alg composite sponge per 25 mL, and an arsenate (As(V)) solution the adsorption capacity was 202.27 mg/g are ideal for efficient adsorption. These parameters are critical in achieving the maximum adsorption capacity of the composite sponge for arsenate, which could be beneficial for water purification applications. Utilizing Design-Expert software's response surface methodology (RSM) and Box-Behnken design (BBD), the adsorption process was optimized with the fewest planned tests. After six successive cycles of adsorption and desorption, the adsorbent stability was confirmed by the adsorbent reusability test without any noticeable decrease in removal efficacy. Additionally, it displayed good efficiency, the same XRD and XPS data before and after reuse, and no change in chemical composition.

Mucoadhesive Chitosan Composite Sponge as a Carrier for β-Sitosterol Cubosomes for Thermal Burn Treatment

Our study aimed to explore the potential of using nanostructured lipid carriers (NLCs) to enhance the topical administration of β-sitosterol, a bioactive that is poorly soluble in water. Here, we have taken advantage of the unique characteristics that cubosomes have to provide as a drug delivery system. These characteristics include a large surface area, thermal stability, and the capacity to encapsulate molecules that are hydrophobic, amphiphilic, and hydrophilic. The cubosomal formulation was optimized by building a central composite design. The optimum dispersion exhibited a particle size of 88.3 nm, a zeta potential of -43, a polydispersity index of 0.358, and drug entrapment of 95.6%. It was composed of 15% w/w oleic acid and 5% w/w pluronic F127. The optimized cubosome dispersion was incorporated into a sponge formulation. The optimized cubosome sponge achieved a higher drug release compared with the cubosome dispersion. The SEM micrograph of the selected sponge showed that it has an interwoven irregular fibrous lamellar structure with low density and high porosity. The in-vivo data revealed that topical application of the β-sitosterol cubosomal sponge showed significant higher wound closure percentage relative to the β-sitosterol product (Mebo)®.Graphical

Microorganisms immobilized hydroxyethyl cellulose/luffa composite sponge for selective adsorption and biodegradation of oils in wastewater

The highly efficient removal of oils such as oils or dyes from wastewater has aroused wide concern and is of great significance for clean production and environmental remediation. The synthesis of a novel aerogel (designated as HEC/LS) is reported herein, achieved through a sol-gel method followed by freeze-drying utilizing loofa and hydroxyethyl cellulose as the raw materials. The new HEC/LS aerogel exhibits excellent porosity and specific surface area, with a porosity of 88.70 %, a total pore area of 0.607 m2 g−1, and a specific surface area of 230 m2 g−1. The prepared HEC/LS aerogel exhibits exceptional hydrophilicity and self-floatability, facilitating its rapid absorption of water up to 21 times its own weight within a mere 3 s. Additionally, it demonstrates good adsorption performance for methylene blue (MB), with a maximum adsorption capacity of 83.30 mg g−1. Subsequently, a new hydrophobic microorganisms-loaded composite aerogel (namely, Bn-HEC/LS) was obtained by doping microorganisms into the as-prepared HEC/LS in multiple enrichment followed by a hydrophobic and oleophilic surface modification. Based on its rich porous structure and oleophilic wettability, the as-synthesized Bn-HEC/LS exhibits excellent selective adsorption and degradation properties for the oil contamination, the diesel oil could be selectively absorbed in the Bn-HEC/LS and degraded by the loaded microorganisms. Among them, B5-HEC/LS displays the highest removal efficiency of 94.50 % within 180 h, while free microorganisms and HEC/LS aerogels show degradation efficiencies of only 21.70 % and 48.10 %, respectively. The fixation of microorganisms in the aerogel increases their number within the material and enhances the relative microorganisms removal capacity. The hydrophobic and lipophilic modifications improve the selective adsorption performance of the aerogel on diesel oil, resulting in a significantly high removal rate of Bn-HEC/LS for diesel oil. The results indicate that the immobilization of microorganisms into aerogel improves the activity of microorganisms, and the hydrophobic and oleophilic modification enhances the selective adsorption performance of aerogel to diesel oil, thus resulting in a very high removal rate of Bn-HEC/LS for diesel oil. This study is expected to provide a now possibility for the green and efficient bioremediation of oils.