Composite Membranes Research Articles

A Review of the Recent Advances in Composite Membranes for Hydrogen Generation Technologies

A Review of the Recent Advances in Composite Membranes for Hydrogen Generation Technologies

Role of Mediterranean Diet and Physical Activity in the Prevention and Treatment of Depression

The Mediterranean diet, characterized by an abundance of whole grains, plant foods, olive oil and moderate intake of fish has been associated with a variety of disease outcomes. The Mediterranean diet is recognised as a healthful dietary pattern and has been extensively associated with chronic disease risk reduction. Consumption of food groups in the Mediterranean-based diet has anti-inflammatory and antioxidant properties which improves endothelial function and neuronal membrane composition. Engagement in physical activity, on the other hand, has anti-inflammatory and neuro-chemical effects that sustains cerebral blood flow, improves aerobic capacity and cerebral nutrient supply, and improves secretion of enkephalins and endorphins secreted during exercise.

In Situ-Grown Al2O3 Nanoflowers and Hydrophobic Modification Enable Superhydrophobic SiC Ceramic Membranes for Membrane Distillation

Membrane distillation (MD) is considered a promising technology for desalination. In the MD process, membrane pores are easily contaminated and wetted, which will degrade the permeate flux and salt rejection of the membrane. In this work, SiC ceramic membranes were used as the supports, and an Al2O3 micro-nano structure was constructed on its surface. The surface energy of Al2O3@SiC micro-nano composite membranes was reduced by organosilane grafting modification. The effective deposition of Al2O3 nanoflowers on the membrane surface increased membrane roughness and enhanced the anti-fouling and anti-wetting properties of the membranes. Simultaneously, the presence of nanoflowers also regulated the pore structures and thus decreased the membrane pore size. In addition, the effects of Al2(SO4)3 concentration and sintering temperature on the surface morphology and performance of the membranes were investigated in detail. It was demonstrated that the water contact angle of the resulting membrane was 152.4°, which was higher than that of the pristine membrane (138.8°). In the treatment of saline water containing 35 g/L of NaCl, the permeate flux was about 11.1 kg×m−2×h−1 and the salt rejection was above 99.9%. Note that the pristine ceramic membrane cannot be employed for MD due to its larger membrane pore size. This work provides a new method for preparing superhydrophobic ceramic membranes for MD.

Laser Patterning of Porous Support Membranes to Enhance the Effective Surface Area of Thin-Film Composite-Facilitated Transport Membranes for CO2 Separation.

Although thin-film composite membranes have achieved great success in CO2 separation, further improvements in the CO2 permeance are required to reduce the size and cost of the CO2 separation process. Herein, we report the fabrication of composite membranes with high CO2 permeability using a laser-patterned porous membrane as the support membrane. High-aspect-ratio micropatterns with well-defined micropores on their surface were carved on microporous polymer supports by a direct laser writing process using a short-pulsed laser. By using a Galvano scanner and optimizing the laser conditions and target materials, in-plane micropatterns, such as microhole arrays, microline grating, microlattices, and out-of-plane hierarchical micropatterns, were created on porous membranes. An aqueous suspension of hydrogel microparticles doped with an amine-based mobile carrier was sprayed onto the patterned surface to form a defect-free thin separation layer. The surface area of the separation layer on the patterned support is up to 80% larger than that of flat pristine membranes, resulting in a 52% higher CO2 permeance (1106 GPU) with a CO2/N2 selectivity of 172. The laser-patterned porous membranes allow the development of inexpensive and high-performance functional membranes not only for CO2 separation but also for other applications, such as water treatment, cell culture, micro-TAS, and membrane reactors.

High Sensitivity Triboelectric Based Flexible Self-Powered Tactile Sensor with Bionic Fingerprint Ring Structure.

Flexible self-powered tactile sensors, with applications spanning wearable electronics, human-machine interaction, prosthetics, and soft robotics, offer real-time feedback on tactile interactions in diverse environments. Despite advances in their structural development, challenges persist in sensitivity and robustness, particularly when additional functionalities, such as high transparency and stretchability. In this study, we present a novel approach integrating a bionic fingerprint ring structure with a PVDF-HFP/AgNWs composite fiber electrode membrane, fabricated via 3D printing technology and electrospinning, respectively, yielding a triboelectric nanogenerator (TENG)-based self-powered tactile sensor. The sensor demonstrates high sensitivity (5.84 V/kPa in the 0-10 kPa range) and rapid response time (10 ms), attributed to the microring texture on its surface, and exhibits exceptional robustness, maintaining electrical output integrity even after 24,000 cycles of loading. These findings highlight the potential of the microring structures in addressing critical challenges in flexible sensor technology.

Positively charged nanofiltration membranes with gradient structures for enhancing separation properties

Creating a gradient structure in a separation layer is an effective approach for enhancing separation performance of thin film composite membranes. Here we present the preparation of a positively charged nanofiltration membrane with a gradient structure. An inner layer consisting of a loose polyester separation layer with large pores was formed through the interfacial polymerization (IP) reaction between triethanolamine (TEA) and trimesoyl chloride (TMC). And a dense and thin top layer composed of a polyamide separation layer was obtained by secondary interfacial polymerization (SIP) reaction using polyethyleneimine (PEI) along with unreacted TMC and residual acyl chloride groups of IP reaction. The influences of TEA concentration, PEI concentration and SIP time on the physicochemical properties and separation performances of the membrane were systematically analyzed. Our results show that the presence of the gradient structure optimized mass transfer pathways and reduced mass transfer resistance, resulting in significantly improved permeability of 13.0 ± 0.5 L·m−2·h−1·bar−1 (over 3 times compared with control-PEI), high MgCl2 rejection of 91.7 ± 0.6 %, and an excellent stability and anti-fouling performance. Our work provides valuable insights and guidance for developing high-performance positively charged NF membrane with gradient structures.

Preparation of MOR/P(S‐co‐VPh) nanofiber composite membrane and its adsorption properties for rubidium ions

AbstractRubidium (Rb), a rare and precious metal, is widely used in high‐tech fields. In this work the structural advantages of mordenite (MOR) and group affinity of phenolic hydroxyl polymers (poly (styrene‐4‐hydroxystyrene) (P(S‐co‐VPh)) are combined to prepare MOR/P(S‐co‐VPh) nanofiber composite membranes with high selectivity and adsorption specificity for Rb+ by electrospinning. The test results show that MOR is successfully anchored on the nanofiber substrate and maintained its complete crystal structure. Adsorption experiments show that the adsorption capacity of Rb+ increases with the increase of MOR content, and pH = 9.0, T = 25°C are the best adsorption conditions. K+ shows the most obvious interference with the adsorption capacity decreased from 60.03 to 39.33 mg/g. The adsorption process follows with the Langmuir isothermal model and pseudo‐second‐order kinetic equation. The chemical adsorption based on the coordination reaction is the control step, and the intraparticle diffusion also has an important effect on the adsorption rate. The recycling test indicates that the prepared nanofiber composite membrane not only has efficient adsorption of Rb+, but also exhibits excellent regeneration and stability, which helps to achieve its widespread application and long‐term operation in harsh environments.

Modulating the hAM/PCL Biocomposite for Expedited Wound Healing: A Chemical-Free Approach for Boosting Regenerative Potential.

There is an arising need for effective wound dressings that retain the bioactivity of a cellular treatment, but without the high costs and complexities associated with manufacturing, storing, and applying cell-based products. As skin wound recovery is a dynamic and complicated process, a significant obstacle to the healing of skin wounds is the lack of an appropriate wound dressing that can imitate the microenvironment of healthy skin and prevent bacterial infection. It requires the well-orchestrated integration of biological and molecular events. In this study, we have fabricated full-thickness skin graft biocomposite membranes to target full-thickness skin excision wounds. We reinforced human amniotic membrane (hAM) with electrospun polycaprolactone (PCL) to develop composite membranes, namely, PCL/hAM and PCL/hAM/PCL. Composite membranes were compared for physical, biological, and mechanical properties with the native counterpart. PCL/hAM and PCL/hAM/PCL displayed improved stability and delayed degradation, which further synergically improved the rapid wound healing property of hAM, driven primarily by wound closure analysis and histological assessment. Moreover, PCL/hAM displayed a comparable cellular interaction to hAM. On application as a wound dressing, histological analysis demonstrated that hAM and PCL/hAM promoted early epidermis and dermis formation. Studies on in vivo wound healing revealed that although hAM accelerates cell development, the overall wound healing process is similar in PCL/hAM. This finding is further supported by the immunohistochemical analysis of COL-1/COL-3, CD-31, and TGF-β. Overall, this conjugated PCL and hAM-based membrane has considerable potential to be applied in skin wound healing. The facile fabrication of the PCL/hAM composite membrane provided the self-regenerating wound dressing with the desired mechanical strength as an ideal regenerative property for skin tissue regeneration.

Composite electrospun membranes based on PET-PAN modified with LDH-hybrid as promising adsorbent for pollutants removal from wastewater

<p>The current work reveals the fabrication of a novel nanofiber composite membrane of PET-PAN modified with Mg-Al-LDH-PVA through electrospinning process. The nanocomposite membranes characterization was conducted with different techniques i.e. SEM, EDS, FTIR, XRD, and water contact angle to evaluate the structure and surface morphology. The optimized nanomembrane was utilized as a useful adsorbent for removal of toxic anionic dye Eriochrome Black T (EBT) and cationic dye Methylene blue (MB) from wastewater. Experimental results identified that PPLP3 membrane has a potential for the removal of EBT (83%) and MB (52%) at pH 3 and 7, respectively, from aqueous solution. The optimum adsorption capacity of PPLP3 nanocomposite membrane was identified and calculated as 7.3 mg.g-1 followed by the pseudo 2nd order kinetics and Langmuir adsorption isotherm fit well with R2 values of 0.964 and 0.997, respectively. The synthesized nanocomposite membrane could be utilized for effective adsorption of contaminations from different wastewaters.</p>

Studies of Protein Binding to Biomimetic Membranes Using a Group of Uniform Materials Based on Organic Salts Derived From 8-Anilino-1-naphthalenesulfonic Acid.

Tuning the 8-anilino-1-naphthalenesulfonic acid (ANS) structure usually requires harsh conditions and long reaction times, which can result in low yields. Herein, ANS was modified to form an ANS group of uniform materials based on organic salts (GUMBOS), prepared with simple metathesis reactions and distinct cations, namely tetrabutylammonium (N4444), tetrahexylammonium (N6666), and tetrabutylphosphonium (P4444). These ANS-based GUMBOS were investigated as fluorescent probes for membrane binding studies with four proteins having distinct physicochemical properties. Liposomes of 1,2-dimyristoyl-sn-glycero-3-phosphocholine were employed as membrane models as a result of their ability to mimic the structure and chemical composition of cell membranes. Changes in fluorescence intensity were used to monitor protein binding to liposomes, and adsorption data were fitted to a Freundlich-like isotherm. It was determined that [N4444][ANS] and [P4444][ANS] GUMBOS have enhanced optical properties and lipophilicity as compared to parent ANS. As a result, these two GUMBOS were selected for subsequent protein-membrane binding studies. Both [N4444][ANS] and [P4444][ANS] GUMBOS and parent ANS independently reached membrane saturation within the same concentration range. Furthermore, distinct fluorescence responses were observed upon the addition of proteins to each probe, which demonstrates the impact of properties such as lipophilicity on the binding process. The relative maintenance of binding cooperativity and maximum fluorescence intensity suggests that proteins compete with ANS-based probes for the same membrane binding sites. Finally, this GUMBOS-based approach is simple, rapid, and involves relatively small amounts of reagents, making it attractive for high-throughput purposes. These results presented herein can also provide relevant information for designing GUMBOS with ameliorated properties.

A bi-functional nanofibrous composite membrane for wound healing applications.

Various wound dressings have been developed so far for wound healing, but most of them are ineffective in properly reestablishing the skin's structure, which increases infection risks and dehydration. Electrospun membranes are particularly interesting for wound dressing applications because they mimic the extracellular matrix of healthy skin. In this study, a potential wound healing platform capable of inducing synergistic antibacterial and antioxidation activities was developed by incorporating bio-active rosmarinic acid-hydroxyapatite hybrid (HAP-RA) with different contents (0.5, 1, and 1.5 wt.%) into the electrospun polyamide 6 (PA6) nanofibers. Then, polyethylene glycol (PEG) was introduced to the nanofibrous composite to improve the biocompatibility and biodegradability of the dressing. The results indicated that the hydrophilicity, water uptake, biodegradability, and mechanical properties of the obtained PA6/PEG/HAP-RA nanofibrous composite enhanced at 1 wt.% of HAP-RA. The nanofibrous composite had excellent antibacterial activity. The antioxidation potential of the samples was assessed in vitro. The MTT assay performed on the L929 cell line confirmed the positive effects of the nanofibrous scaffold on cell viability and proliferation. According to the results, the PA6/PEG/HAP-RA nanofibrous composite showed the desirable physiochemical and biological properties besides antibacterial and antioxidative capabilities, making it a promising candidate for further studies in wound healing applications.

New strategy for structure rearrangement of thin-film composite (TFC) polyamide (PA) membranes and offering potential use in both aqueous and organic solvents

The purity of sodium hexafluorophosphate (NaPF6) is crucial for the preparation of electrolytes in manufacturing. We propose a simple process in order to induce membrane structure rearrangement process (SRP) by activating thin-film composite (TFC) membranes with polyamide (PA) structure and explore their potential green recycling application in concentrating sodium-ion batteries (SIBs) electrolyte. The method utilizes a solution containing polar aprotic solvent as the soaking and activating solution to swell and disintegrate the loosely cross-linked PA layer, and a non-solvent solidification solution complete the SRP, enhancing the permeability of the PA layer while maintaining high rejection rates for divalent ions. Subsequently, during the further treatment of the membrane surface in structure rearrangement, tert-butanol (TBA) is introduced into the aqueous solution to reconstruct the surface PA layer, further improving the permeability. The optimal D8010T10 achieved a permeation flux of 24.2 L m−2 h−1·bar−1, with rejection rates for sodium sulfate (Na2SO4), magnesium chloride (MgCl2), and magnesium sulfate (MgSO4) reaching 94.7 %, 98.4 %, and 99.1 % respectively. And the mechanism of SRP with different solvent is analyzed and explained through dissipative particle dynamics (DPD) simulations. This study provides a commercially viable approach for manufacturing high-performance membranes. The D8010T10 membrane achieves more than 90 % separation efficiency for sodium hexafluorophosphate (NaPF6) dissolved in different solvents, providing a potential solution for the concentration and recovery of NaPF6 in lab-scale, verified its potential use in the organic solvent nanofiltration (OSN) and a path way for waste membrane recycling and degrading use in the industry.

Oxygen Doping Cooperated with Co-N-Fe Dual-Catalytic Sites: Synergistic Mechanism for Catalytic Water Purification within Nanoconfined Membrane.

Atom-site catalysts, especially for graphitic carbon nitride-based catalysts, represents one of the most promising candidates in catalysis membrane for water decontamination. However, unravelling the intricate relationships between synthesis-structure-properties remains a great challenge. This study addressed the impacts of coordination environment and structure units of metal central sites based on Mantel test, correlation analysis and evolution of metal central sites. An optimized unconventional oxygen doping cooperated with Co-N-Fe dual-sites (OCN Co/Fe) exhibited synergistic mechanism for efficient peroxymonosulfate activation, which benefited from a significant increase in charge density at the active sites and the regulation in the natural population of orbitals, leading to selective generation of SO4 •-. Building upon these findings, the OCN-Co/Fe/PVDF composite membrane demonstrated a 33 min-1 ciprofloxacin (CIP) rejection efficiency and maintained over 96% CIP removal efficiency (over 24h) with an average permeance of 130.95 L m-2 h-1. Our work offers a fundamental guide for elucidating the definitive origin of catalytic performance in advance oxidation process (AOPs) to facilitate the rational design of separation catalysis membrane with improved performance and enhanced stability. This article is protected by copyright. All rights reserved.

Size- and Shape-Dependent Interactions of Lipid-Coated Silver Nanoparticles: An Improved Mechanistic Understanding through Model Cell Membranes and In Vivo Toxicity.

The widespread use of silver nanoparticles (AgNPs) in various applications and industries has brought to light the need for understanding the complex relationship between the physicochemical properties (shape, size, charge, and surface chemistry) of AgNPs that affect their ability to enter cells and cause toxicity. To evaluate their toxicological outcomes, this study systematically analyzed a series of homogeneous hybrid lipid-coated AgNPs spanning sizes from 5 to 100 nm with diverse shapes (spheres, triangles, and cubes). The hybrid lipid membrane comprises hydrogenated phosphatidylcholine (HPC), sodium oleate (SOA), and hexanethiol (HT), which shield the AgNP surface from surface oxidation and toxic Ag+ ion release to minimize its contribution to toxicity. To reduce any significant effects by surface chemistry, the HPC, SOA, and HT membrane composition ratio was kept constant, and the AgNPs were assessed using embryonic zebrafish (Danio rerio). While a direct comparison cannot be drawn due to the lack of complementary sizes below 40 nm for triangular plates and cubes due to synthetic challenges, significant mortality was observed for spherical AgNPs (AgNSs) of 5, 20, 40, and 60 nm at 120 h postfertilization at concentrations ≥6 mg Ag/L. In contrast, the 10, 80, and 100 nm AgNSs, 40, 70, and 100 nm triangular plate AgNPs (AgNPLs), and 55, 75, and 100 nm cubic AgNPs (AgNCs) showed no significant mortality at 5 days postfertilization following exposure to AgNPs at concentrations up to 12 mg Ag/L. With constant surface chemistry on the AgNPs, size is the dominant factor driving toxicological responses, with smaller nanoparticles (5 to 60 nm) being the most toxic. Larger AgNSs, AgNCs, and AgNPLs from 75 to 100 nm do not show any evidence of toxicity. However, when closely examining sizes between 40 and 60 nm for AgNSs, AgNCs, and AgNPLs, there is evidence that discriminates shape as a driver of toxicity since sublethal responses generally were observed to follow a pattern, suggesting toxicity is most significant for AgNSs followed by AgNPLs and then AgNCs, which is the least toxic. Sum frequency generation vibrational spectroscopy showed that irrespective of size or shape, all hybrid lipid-coated AgNPs interact with membrane surfaces and "snorkel" between phases into the lipid monolayer with minimal energetic cost. These findings decisively demonstrate that not only smaller AgNPs but also the shape of the AgNPs influences their biological compatibility.

A ternary composite hydrophilic electrospinning membrane containing Au for fast oil–water separation and antibiotics degradation

AbstractWater pollution from industrial wastewater and oil spills, which threat marine lives and mankind continually have turned into one of the most severe challenges in worldwide due to the fast development of global industrialization and human activities. Various water‐treatment methods have been developed to solve the problems. However, these processes are often complicated and costly, making them fail to address the complicate water environment. Herein, a visible light‐responsive Au‐BiOCl/TiO2/PAN composite membrane with hydrophilic surface was prepared by combing electrospinning with solvothermal method. The composite membranes can efficiently separate emulsions with the highest flux of 50.16 L m−2 h−1 and oil/water mixtures (the highest flux was 4777.07 L m−2 h−1 bar−1). Moreover, the membranes can rapidly degrade antibiotics with an excellent degradation rate (95.70% in 60 min) under the visible light. Additionally, they can simultaneously degrade organic dye and separate oil/water emulsions under a gravity condition. It is expected that composite membranes will be an attractive candidate for complex wastewater treatment.

Investigation of the influence of nano ZnO particle doping in electrode membrane on the output characteristics of biomimetic artificial muscles

AbstractBiomimetic artificial muscles (BMAMs) aim to imitate the movement and capabilities of natural muscles, drawing inspiration from their structure and function. This research utilized multiwalled carbon nanotubes to increase the conductivity of the electrode membrane and replaced traditional electroactive polymers with sodium alginate to improve the output performance of BMAMs. To further strengthen the output force of the electrode membrane, nanoscale ZnO was chosen as the doping material. Various composite electrode membranes were created during the experiments, each containing varying amounts of ZnO nanoparticles. The membranes' surface morphology was extensively examined with scanning electron microscopy, and the composite electrode membranes were fully assessed on an electrochemical workstation. Electrochemical testing showed that adding nanoscale ZnO particles greatly boosted the specific capacitance of the electrode membrane, which was directly linked to the performance of BMAMs. Impedance spectroscopy test results indicated a minimal impact of nanoscale ZnO particle doping on the internal resistance of the electrode membrane.Highlights Sodium alginate replaces electroactive polymers, easing environmental impact. Nano ZnO doping boosts electrode membrane's capacitance for stronger muscles. ZnO doping shows minimal effect on electrode membrane's resistance.

Polyvinyl alcohol/polyethyleneimine grafted carbon oxynitride composite nanofiber membranes with the synergistical enhanced photocatalytic degradation and bactericidal performance

AbstractGraphitic carbon nitride (g‐C3N4) has received much attention as a metal‐free photocatalyst for dye degradation and sterilization. However, the low photocatalytic bactericidal activity and the difficulty in recycling have limited its applications. Here, oxidatively modified g‐C3N4 grafted with polyethyleneimine (PEI) nanofiber membranes (PVA/PEI‐OCN) was reported to enhance the photocatalytic activity. The modification by PEI grafting could reduce the recombination rate of photogenerated carriers and lead to more electrons for the photocatalytic reaction. In addition, electron spin resonance (ESR) results showed that the generation of reactive oxygen species (˙OH, ˙O2− and 1O2) were significantly enhanced in photocatalysis, leading to the significant enhancement of photocatalytic bactericidal activity and dye degradation. Furthermore, the PVA/PEI‐OCN nanofiber membranes prepared by electrospinning had smooth surfaces and uniform fiber formation, with an average diameter of 380 ± 60 nm. The tensile strength was about 73.5% higher than that of PVA nanofiber membranes. The inhibition diameter of PVA/PEI‐OCN‐4 against Escherichisa coli (E. coil) could reach 20 ± 0.2 mm, and the maximum degradation efficiency of methylene blue solution (10 mg/L) could reach 92.8% within 120 min. This work provided an effective paradigm for the rational design of metal‐free photocatalytic materials for elimination of bacterial and dye contamination.

Ameliorating carbon capture efficiency of polysulfone membranes via collegial incorporation of zeolite imidazole frameworks and carbon nanotubes

AbstractContinuously exacerbating situation of global warming can be effectively mitigated by controlling carbon emissions from combustion processes through economically attractive membrane technology. Carbon capture efficiency of prospective membranes can be significantly improved via synergistically incorporating CO2‐selective ZIF‐300 nanoparticles and carbon nanotubes (CNTs) into polysulfone (PSF) matrix. Solution‐casting coupled with phase‐inversion processes were employed to concoct hybrid membranes containing varying loadings of both nanofillers. Manufactured composite membranes showed improved matrix structure, uniform nanofillers scattering, enhanced thermal resistance, and ameliorated nanofillers‐polysulfone interfacial adhesion as evidenced by morphological and thermal analysis. Both sorption and permeation measurements for CO2 and N2 gases performed on created membranes indicated upgraded CO2 permeability and CO2/N2 permselectivity on account of collegial impact of added nanofillers. In contrast to pristine polysulfone membrane rendering CO2 intake of 4.1 and CO2/N2 sorption selectivity of 12, hybrid membrane containing 15% ZIF‐300 and 3% CNTs uplifted corresponding values to 12 and 22, respectively. As compared to unadulterated polysulfone membrane, CO2 permeability and CO2/N2 permselectivity of hybrid membrane doped with optimized nanofillers loading of were, respectively, elevated by five‐ and three‐folds. Unique features of manufactured membranes can best be manifested in terms of their ability to maintain gas separation performance from post‐combustion effluents.

Enhancing Performance and Stability of High-Temperature Proton Exchange Membranes through Multiwalled Carbon Nanotube Incorporation into Self-Cross-Linked Fluorenone-Containing Polybenzimidazole.

Addressing critical challenges in enhancing the oxidative stability and proton conductivity of high-temperature proton exchange membranes (HT-PEMs) is pivotal for their commercial viability. This study uncovers the significant capacity of multiwalled carbon nanotubes (MWNTs) to absorb a substantial amount of phosphoric acid (PA). The investigation focuses on incorporating long-range ordered hollow MWNTs into self-cross-linked fluorenone-containing polybenzimidazole (FPBI) membranes. The absorbed PA within MWNTs and FPBI forms dense PA networks within the membrane, effectively enhancing the proton conductivity. Moreover, the exceptional inertness of MWNTs plays a vital role in reinforcing the oxidation resistance of the composite membranes. The proton conductivity of the 1.5% CNT-FPBI membrane is measured at 0.0817 S cm-1 at 160 °C. Under anhydrous conditions at the same temperature, the power density of the 1.5% CNT-FPBI membrane reaches 831.3 mW cm-2. Notably, the power density remains stable even after 200 h of oxidation testing and 250 h of operational stability in a single cell. The achieved power density and long-term stability of the 1.5% CNT-FPBI membrane surpass the recently reported results. This study introduces a straightforward approach for the systematic design of high-performance and robust composite HT-PEMs for fuel cells.

Interfacial Super‐Assembly of Vacancy Engineered Ultrathin‐Nanosheets toward Nanochannels for Smart Ion Transport and Salinity Gradient Power Conversion

Ion‐selective nanochannel membranes assembled from two‐dimensional (2D) nanosheets hold immense promise for power conversion using salinity gradient. However, they face challenges stemming from insufficient surface charge density, which impairs both permselectivity and durability. Herein, we present a novel vacancy‐engineered, oxygen‐deficient NiCo layered double hydroxide (NiCoLDH)/cellulose nanofibers‐wrapped carbon nanotubes (VOLDH/CNF‐CNT) composite membrane. This membrane, featuring abundant angstrom‐scale, cation‐selective nanochannels, is designed and fabricated through a synergistic combination of vacancy engineering and interfacial super‐assembly. The membrane shows interlayer free‐spacing of ~3.62 Å, which validates the membrane size exclusion selectivity.This strategy, validated by DFT calculations and experimental data, improves hydrophilicity and surface charge density, leading to the strong interaction with K+ ions to benefit the low ion transport resistance and exceptional charge selectivity. When employed in an artificial river water|seawater salinity gradient power generator, it delivers a high‐power density of 5.35 W/m2 with long‐term durability (20,000s), which is almost 400% higher than that of the pristine NiCoLDH membrane. Furthermore, it displays both pH‐ and temperature‐sensitive ion transport behavior, offering additional opportunities for optimization. This work establishes a basis for high‐performance salinity gradient power conversion and underscores the potential of vacancy engineering and super‐assembly in customizing 2D nanomaterials for diverse advanced nanofluidic energy devices.