Complex Geological Evolution Research Articles

The 3D Density Structure of the South China Sea Based on Wavelet Multi-Scale Analysis of Gravity Data and Its Tectonic Implications

Due to its unique geographical location and complex geological evolution processes, the South China Sea has been a focus of extensive research. Previous studies on the density structure of the South China Sea mostly focused on 2D density structures, with relatively limited research on 3D density structures. A comprehensive study is still needed to refine the expansion mechanism and tectonic evolution of the South China Sea. In this study, we utilized wavelet multi-scale analysis of gravity data to obtain a 3D density model of the South China Sea and discussed its tectonic evolution from the pattern of density anomalies. The inversion results show that (1) the expansion of the South China Sea caused the typical thin oceanic crust and parts of the continent–ocean transition zone may fracture due to the expansion; (2) the low-density anomaly in the upper mantle of Luzon Island may indicate partial melting or the upwelling of asthenosphere materials; and (3) the expansion of the South China Sea is influenced by multiple plate forces and uneven forces affect the distribution of high-density anomalies in the upper mantle.

Updating Geological Information about the Metallogenesis of the Iberian Pyrite Belt

The Iberian Pyrite Belt (IPB) represents one of the largest districts of volcanogenic massive sulfide (VMS) deposits in the world, and is a critical source of base metals (Cu, Pb, and Zn) for Europe. Confirmed resources exceed 1700 Mt of massive sulfides with grades of around 1.2% Cu, 1% Pb, and 3% Zn as well as more than 300 Mt of stockwork-type copper mineralization. Significant resources of Sn, precious metals (Au and Ag), and critical metals (Co, Bi, Sb, In, and Se) have also been evaluated. The genesis of these deposits is related to a complex geological evolution during the late Devonian and Mississippian periods. The geological record of such evolution is represented by three main lithological units: Phyllite–Quartzite Group, the volcano–sedimentary Complex (VSC), and the so-called Culm Group. The sulfide deposits are located in the VSC, associated with felsic volcanic rocks or sedimentary rocks such as black shales. The massive sulfide deposits occur as tabular bodies and replacement masses associated with both volcanic and sedimentary rocks. Their mineralogical composition is relatively simple, dominated by pyrite, chalcopyrite, sphalerite, and galena. Their origin is related to three evolutionary stages at increasing temperatures, and a subsequent stage associated with the Variscan deformation. The present paper summarizes the latest developments in the IPB and revises research areas requiring further investigation.

Interaction between active tectonics, bottom-current processes and coral mounds: A unique example in the NW Moroccan Margin, southern Gulf of Cadiz

The NW Moroccan Margin has a complex geological evolution, being located close to the transition zone between the Azores – Gibraltar Fracture Zone and the western front of the Betic–Rif collisional orogen. The interaction between tectonic, halokinetic and fluid flow processes with bottom-current activity shapes the seafloor and influences the distribution of seafloor biological communities (such as the cold-water coral mounds) and deep-water sedimentation. The aims of this work are to study the interaction of the paleo-oceanographic and morpho-tectonic processes that generated the various seafloor features of the NW Moroccan Margin. To achieve this, high-resolution multibeam bathymetry and parasound data acquired in the “ALBOCA II” cruise have been used, complemented by high-resolution 2D seismic reflection data and the EMODnet bathymetric compilation.Several morphological features were identified in the margin, which are related to different processes of sedimentary (contourites and sediment waves), structural (faults and diapirs), gravitational (slide scars, mass transport deposits), fluid migration (mud volcanoes and pockmarks) and biogenic (exposed and buried coral mounds) nature. The structural features (e.g., strike-slip faults) have a major control on the seafloor morphology and, consequently, on the development and evolution of the sedimentary systems in the study area.The evolution of the NW Moroccan Margin during the late Quaternary has been controlled by climatic variations and tectonic activity. The action of these factors has been dominant in distinct parts of the study area where: i) contourite terraces developed when climatic and oceanographic changes were the prevalent factor, ii) mounded and confined contourite drifts and local mass transport deposits formed when the major control was tectonic activity.

Mapping exploration targets through multifractal modelling of soil geochemical data in the Xiaohongshilazi Pb–Zn–(Ag) ore district, Jilin Province, NE China

The Xiaohongshilazi Pb–Zn–(Ag) ore district, located in the Jizhong–Yanbian Metallogenic Belt in NE China, presents challenges in identifying geochemical anomalies and prospecting minerals due to thick covers, complex geological evolution and mining activities. To overcome these obstacles, we adopted an innovative approach that combines multifractal theory with concentration-area (C-A) modelling and local singularity analysis (LSA) to characterize the geochemical signature. Initially, factor analysis of log-transformed data was used to identify ore-forming factors, which were then modelled using C-A and LSA. Subsequently, modelling results were compared to conventional maps generated using inverse distance weighted (IDW) interpolation. Additionally, the C-A model was employed to establish thresholds for singularity indices generated by LSA for target mapping. The results revealed a close relationship between Factor 1 (F1) and mineralization. The C-A model of F1 failed to detect weak anomalies compared to the IDW-interpolated map, while LSA not only identified weak anomalies but also enhanced the detection of reliable anomalies. Three prospecting targets (PT-01, PT-02 and PT-03) were identified. Validation of PT-01 using new drillholes and existing mineralization confirms the effectiveness of targets and the accuracy of the model. Our approach provides a robust alternative for prospecting at ore districts encountering similar challenges.

Formation mechanism of skarn iron deposit: Evidence from Fe-rich enclave in porphyritic monzonite

Skarn deposits constitute a significant reservoir of high-grade iron (Fe) ores in China, yet the metallogenic processes remain debated. This study focuses on the iron-rich enclaves embedded within porphyritic monzonite, aiming to unravel the metallogenic mechanisms underlying skarn Fe deposits. The host porphyritic monzonite intrudes into porphyritic diorite. Within the iron-rich enclaves three types of magnetite (Mt) are discerned. Mt-I, ranging from 50 to 100 μm in size, predominantly occupies the core of the enclave, enshrouding diopside at its center. Mt-II, with a size range of 20–40 μm, is primarily distributed in the middle of the enclave. The smallest variant, Mt-III, measuring approximately 1 μm, typically manifests at the peripheries of Mt-I and Mt-II. Comparative analysis reveals that Mt-II exhibits higher total rare earth elements (REE), Sr, Ca, alongside lower TiO2 content in contrast to Mt-I. Notably, Mt-II displays a characteristic W-type tetrad effect of REE, indicative of crystallization in a fluid-saturated environment. In contrast, Mt-III, characterized by microcrystalline magnetite, is inferred to have formed under conditions of rapid cooling.Our interpretation posits a two-stage genesis for these enclaves. The initial stage involves the formation of iron-rich magma within a magma chamber situated at depths of 8–10 km, during which Mt-I crystallizes. Subsequently, the second stage unfolds as mantle-derived fluids infiltrate the magma chamber, leading to the formation of Mt-II. The fluid overpressure within the magma chamber triggers a swift ascent of iron-bearing melt-fluid, localized at depths ranging from 1.5 to 2.6 km, resulting in the crystallization of Mt-III. Our results provide valuable insights into the metallogenic processes governing skarn Fe deposits, and the complex geological evolution of these deposits.

Atypical chromitite deposit in the Gaositai mafic-ultramafic complex, North China Craton: Geochemical, geochronological, and isotopic systematics

The Gaositai mafic-ultramafic complex in the North China Craton hosts a significant chromitite deposit featuring morphological and geochemical characteristics that deviate from the usual characteristics of typical high-Cr and low-Al podiform chromitites. Field observations and microscopic studies reveal notable variations in textural layering, mineralogy, and geochemical composition, challenging conventional features of stratiform chromitite deposits. Zircon UPb ages indicate that chromitite is most likely Carboniferous-Permian in age (330–275 Ma), but also contains numerous inherited zircons with concordant ages as old as 2544 Ma, reflecting a complex geological evolution. Post-formation metasomatic or metamorphic imprints can be evident by concordant zircon ∼247 Ma. Variable zircon εHf(t) values (−15 to +9.6) and depleted mantle model ages (432 to 2819 Ma) attest the presence of heterogeneous or reworked source materials.The PGE and trace element characteristics of the Gaositai chromitite are comparable to the geochemical features of Bushveld and Great Dyke deposits. Pyrite, millerite, norsethite, galena, and PGM (mainly OsIr alloys) inclusions are ubiquitous in chromite. Galena inclusions with homogenous Pb-isotopic ratios (206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb) suggest a mixed sources of lead. In contrast, pyrite inclusions display significant variations in δ34SV-CDT values (−0.11 ‰ to 18.31‰) indicative of a crustal origin of sulfur. Bulk-rock ReOs isotope data of 0.1264–0.1294 shows 187Os/188Os ratios similar to abyssal peridotites, implying a potential connection between chromitite and the host ultramafic rocks. Highly disparate mantle model ages (55 to 2141 Ma) and re-depletion ages (28 to 692 Ma) suggest disturbance of the ReOs isotopic system during post-formational metasomatic or metamorphic events. These variations may, alternatively, reflect heterogeneity by subduction components. The obtained results do not support the Alaskan-type genesis of the host complex, but point towards an atypical stratiform type.

Crustal structure across the Central part of Narmada-Son Lineament, India based on the interpretation of aeromagnetic and gravity data: Geological implications

Narmada-Son Lineament (NSL) is a prominent geo-tectonic feature located in central India, characterised by complex geological structures and evolution history. In this study, we present a detailed joint interpretation of the aeromagnetic and gravity anomaly maps to delineate the crustal structure in order to address the thermo-tectonic activity below the NSL region. The NW-SE linear trend observed in the aeromagnetic anomaly map correlates well with the major tectonic elements of the NSL and the Vindhyan basin. The low-pass filtered regional gravity anomaly map and corresponding residual anomaly map revealed several crustal-scale structural features in the study area. The Curie depth map of the region prepared from the magnetic anomaly map shows the variation between 24-48 km. The corresponding heat flow map correlates well with the trends in surface heat flow data. The gravity-derived Moho depth map reveals that the values vary between 30-40 km in the NSL region with deeper Moho below the Vindhyan basin. Further, the crustal models obtained from the constrained potential field modelling for two long transects across the NSL in the present study area revealed i) the absence of crustal underplating in the eastern part of NSL below Hirapur-Mandla region, ii) the presence of mid-crustal horst like structure below NSL in both the transects, iii) undulating Moho with higher density crustal rocks within the NSL compared to the surrounding areas. The modelled crustal structure and the analysis of Curie depth as well as heat flow maps of the study area, reveal that the NSL region was affected by repeated tectonic activities since the Proterozoic times, and the present-day tectonics of this belt is greatly influenced by the reactivation of pre-existing faults along the NSL.

Zircon U-Pb and trace element constraints on the evolution of the Tonian (829–831 Ma) alkaline plutons within the Mercara Shear Zone, south India

The research sheds light on the age, origin, and tectonic environment of two significant alkaline plutons, Sullya and Angadimogar, located in the Mercara Shear Zone in the Southern Granulite Terrain of southern India. The zircon U-Pb dating indicates that the plutons crystallized at 829 ± 3.7 Ma and 831 ± 4.7 Ma, respectively. The zircon geochemistry suggests that Sullya and Angadimogar plutons underwent distinct crystallization processes, with zircons from Angadimogar samples crystallizing at varying temperatures over a prolonged period with limited fO2 levels and zircons from Sullya samples crystallizing at stable temperatures and variable redox conditions. Most of the zircons from both plutons have trace element characteristics indicating formation in the continental crust. In contrast, some zircons from Sullya have trace elements similar to those found in the oceanic crust. The presence of two distinct types of zircons in Sullya samples indicates that the parental melt of the Sullya pluton consisted of magma from multiple sources. The average estimated temperature for zircon crystallization in Sullya was 691 °C, while the mean temperature in Angadimogar was 802 °C. The research implies that the plutons were emplaced parallel to the shear plane during an extensional regime, reactivating the paleo shears during the late Proterozoic era. The study highlights the importance of using multiple geochemical and geochronological techniques to gain a better understanding of the complex geological evolution of the Precambrian terrains.

Geochemical characteristics of hydrogen, oxygen, carbon isotopes and REE of cenozoic dolomites in Well Xike 1, Xisha Islands, South China sea and the significance for dolomitization in island-reef areas

Due to the special tectonic background and complex geological evolution characteristics of the South China Sea, reef dolomite reservoirs (sush as Well Xike 1) are widely developed. Based on the drilling core data of Well Xike 1, the structure and geochemical characteristics of dolomite reservoirs, including carbon, oxygen, hydrogen isotopes and REE were systematically studied using geochemical and petrological methods. It is found that the geochemical characteristics of REE show that the main diagenetic environment of dolomites is a low-temperature alkaline semi open oxidation environment; the carbon and oxygen isotopes of the dolomites are generally lack of correlation, the δD value is significantly lower than the hydrogen isotope value of seawater. Meanwhile, the oxygen isotope value of deep dolomites is negatively biased, which may be due to the increase or decrease of pore water temperature caused by deep thermal convection that related to the regional tectonic movements of the South China Sea. The δ18O value is also consistent with the geological reality of increasing saddle dolomite content in deep dolomites. The distribution of the δ13C value indicates that the dolomite inherited the carbon of the original limestone during dolomitization, while the characteristic of the δD value shows that it may be affected by the mixing of atmospheric precipitation and concentrated seawater in the quasi contemporaneous period. Based on the comprehensive analysis of the geochemical characteristics of the Well Xike 1, it is considered that the higher diagenetic temperature could be an important factor leading to the huge differences between the diagenetic model of deep and shallow dolomites. The geochemical characteristics of the shallow dolomites show that it is mainly reflux infiltration dolomitization under the micro evaporation and concentration sea water environments, while the deep dolomite is transformed by the hot water fluids in the epigenetic diagenetic evolution stage.

Paleoenvironmental conditions over the Caribbean Large Igneous Province during the Late Cretaceous in NW of South American Margin: A sedimentological and ichnological approach

The Late Cretaceous in northwest South America was a period marked by synchronous regional geological processes (e.g., accretion of oceanic terranes, arc magmatism, sea-level fluctuations, oceanographic dynamics), related to the interaction of the Caribbean Large Igneous Province (CLIP) with the NW margin of South America. This synchroneity makes it difficult to reconstruct the complex geological evolution of this region. In Colombia, Upper Cretaceous marine sedimentary and low-grade metamorphic rocks are commonly exposed in both the Western Cordillera and the Sinú-San Jacinto Basin in the Pacific and Caribbean regions respectively. Significant deformation and structural complexity are the main limiting factors for sedimentological and paleontological studies of these deposits.Detailed sedimentological and ichnological analyses were carried out in eight sections, two in the Caribbean region and six in the Pacific region. The Caribbean sections are composed of limestones, mudrocks, siliceous and calcareous mudrocks, and cherts, associated with pelagic and hemipelagic deposits (E2.2 and G2.1 facies). The Pacific sections are characterized by two facies associations, one composed of mudrocks, limestones, as well as chert associated with pelagic and hemipelagic deposits (E2.2 and G2.1 facies) and the other of interlayered siliceous mudrocks and sandstones associated with turbiditic systems (C2 facies). Upper Cretaceous deposits in both regions are characterized by relatively low to moderate abundant and diverse trace fossils assemblages, consisting of Chondrites, Planolites, and Zoophycos in the Caribbean region and Chondrites, ?Nereites, Phycodes, Phycosiphon, Planolites, Thalassinoides, and Zoophycos in the Pacific region, assigned to the Zoophycos ichnofacies. Sedimentological and ichnological features suggest deposition in deep-marine environments characterized by pelagic, hemipelagic, and turbiditic sedimentation. Integrated with the biostratigraphical framework, this allows us to establish a regional correlation between both regions. High nutrient supply, poor oxygenation, and low hydrodynamic energy and sedimentation rates interrupted by episodic increases associated with turbiditic deposits are main paleoenvironmental factors controlling the sedimentation over the CLIP during Late Cretaceous.

Geosite Assessment as a Tool for the Promotion and Conservation of Irpinia Landscape Geoheritage (Southern Italy)

Irpinia (Province of Avellino, Campania Region) is a historical–geographical region of Southern Italy inhabited in pre-Roman times by the ancient Samnite tribe of the Irpini, from which the name originates. This area is characterized by both low population density and high naturalness; located on the axial sector of the southern Apennine orogenic chain, the area possesses a complex hilly and mountainous orography, with predominantly agricultural and forest land uses. In this geographical context, there are many relevant geological/geomorphological sites, witnessing a wide geodiversity attributable to complex geological evolution and relief morphogenesis. The extensive bio-geodiversity has thus led to widespread geotourism practices. Irpinia is favored for its beautiful landscapes, rich cultural heritage, and typical small towns, often enhanced by quality certifications; moreover, geotourism activities are often associated with other forms of sustainable tourism. Starting from this geographical framework, the article analyzes eight attractive geosites that represent the geotouristic value of the entire Irpinia area well. The analysis was conducted using well-known qualitative and quantitative assessment methods. The results obtained, emphasizing the salient aspects of geodiversity, can be used in planning the usability of the sites and, more generally, planning for the Irpinian landscape in a geo-ecotouristic sense.

The State-of-the-Art Techniques of Hydrocarbon Detection and Its Application in Ultra-Deep Carbonate Reservoir Characterization in the Sichuan Basin, China

The Sichuan Basin is one of the most important gas-bearing basins in China, and its production accounts for more than a quarter of the country. In the past 10 years, major natural gas exploration discoveries in the basin were in ultra-deep ancient carbonate formations. The discovery of large marine gas fields has gone through a long period of exploration. For example, the Anyue gas field was discovered after more than 40 years of exploration. The main difficulty stems from deep burial, old age, and the complex geological evolution history of the carbonate rock and the resulting difficulty in identifying gas-bearing reservoirs. Although state-of-the-art reservoir prediction techniques have been used, the success rate of the exploration wells is relatively low. At present, the success rate of the ultra-deep exploration wells is about 30%. To enhance the reliability of the hydrocarbon detection of the ultra-deep carbonate reservoirs, we have developed a few novel methods in the last 10 years, including seismic-print analysis (SPA), depth-domain seismic dispersion analysis (DDSDA), and deep learning seismic analysis Applications to field data show that the results obtained by the new methods are in better agreement with the drilling results. This article presents the methods and their applications in the identification of the ultra-deep carbonate gas-bearing reservoirs in the Sichuan Basin, China. Key issues in hydrocarbon detection of ultra-deep carbonate reservoirs, which have not been solved well, are also discussed.

Modeling analysis of coalbed methane co-production interference: A case study in Eastern Yunnan Basin, China

The interlayer interference in coalbed methane (CBM) co-production wells restricts the effective development of CBM resources in multi-seam areas; however, the establishment of quantitative interference indicators still remains difficult to date resulting from the complex geological formation evolution and reservoir development techniques. In this paper, the reverse flow rate and the water production inhibition index of the coal seam were derived from the transient inflow performance relationship (IPR) curve to characterize the interlayer interference. The IPR curves of different reservoir and aquifer parameters were calculated on the modified reservoir model using a CBM well as a case in East Yunnan Basin. From the data processing for obtaining interlayer interference indicators, the pressure difference between coal reservoirs was found to be the most critical factor in generating reverse fluids, with a 15% difference and the interference amounting to 244.08 m3 d·KPa−1, followed by coal seam thickness and permeability (∼18.00–25.00 m3 d·KPa−1). Gas content, Langmuir pressure, and Langmuir volume contribute slightly to the interlayer interference. Second, any increase in thickness or permeability of the aquifer will significantly increase the water production rate of the coal seam due to water influx. Significantly, the reverse flow rate will be increased when the aquifer is located in a higher fluid pressure system. Instead, the reverse flow rate will be decreased in the case of a lower pressure system. Finally, continuous pressure drops lead to the coal seam and aquifer recharge capacity higher than the set drainage system, resulting in the coal seam water not being removed effectively. The coal seam's water production inhibition index shows a positive correlation with the thickness and permeability of the aquifer and a negative correlation with the drainage intensity. The results of this paper bridge the gap between the identification interference indicators and the possible combination of production layers, and it also provides new insights for enhancing CBM development in the East Yunnan Basin.

Anatomy of Anthropically Controlled Natural Lagoons through Geophysical, Geological, and Remote Sensing Observations: The Valli Di Comacchio (NE Italy) Case Study

Newly collected morphobathymetric and seismic reflection data from the Valli di Comacchio coastal lagoons, south of the Po River delta (Northeast Italy), combined with historical, remote sensing, and geodetic data highlight a complex geological evolution during the Holocene, strongly affected by anthropic control. All data allowed us to define the present-day depositional environment of the lagoons and reconstruct their recent (late Pleistocene/Holocene) geo-history. We focused on the effects of the anthropic impacts in modifying the pristine environments created by the Holocene transgression along the Adriatic Sea coast, at the mouth of a major river. They include land reclamation works, artificial damming, channel excavations, fluvial diversions, and a recent (last decades) increase in subsidence rate due to gas and water withdrawals. Despite the development of economic activities, which promoted occupation and exploitation of this area in the last millennia, the post-Glacial evolution of the lagoons shows the important role of inherited morphological features, such as sand ridges and barriers. This complex and relatively well-documented evolution makes the Comacchio lagoons a unique example of deep connections between natural processes and long-term human controls, offering insights into the management policies of these important and delicate environments challenged by global changes.

Nature and evolution of the ore‐forming fluids in the Shazhou volcanic‐related hydrothermal uranium deposit, Xiangshan ore field, SE China

The Xiangshan uranium (U) ore field in South‐east China has been recognized as the largest volcanic‐related hydrothermal U deposit in China since its discovery in the 1950s. The U mineralization at Xiangshan is mostly hosted in felsic volcanic and sub‐volcanic rocks and occurs mainly in veins, which are controlled by high‐angle normal faults in association with haematite, quartz, fluorite, apatite, and pyrite. Likewise, diverse hydrothermal alterations such as haematitization, silicification, fluoritization, and illitization have been identified adjacent to the ore‐bearing faults and outward for tens to hundreds of metres into the volcanic rocks. Situated to the west in the Xiangshan ore field, the Shazhou deposit is the second‐largest U deposit in the Xiangshan volcanic basin. Based on geological field evidence and petrographic observations, the ore‐forming fluids in the Shazhou U deposit can be classified and separated into three stages (early, main, and late): (a) fluids associated with the early mineralization stage are characterized by the oxidizing feature with U‐O hydroxide complexes as the dominant species; (b) fluids from the main mineralization stage were reducing fluids with black–purple fluorite and sulphide complexes of U‐Ti‐O; and (c) fluids from the late‐stage were weakly oxidizing fluids with light purple fluorite and light red calcite complexes of U‐O as the dominant species in the fluid. Fluid inclusions in alteration minerals from the main and late mineralization stage recorded homogenization temperatures (Th) of 280–340°C and 200–260°C, with salinities of 5–17 and 6–10% NaCleqv, respectively. Ore‐forming fluids contain variable amounts of CO2, O2, and H2, in which the volatile content in the main mineralization stage is higher than that in the late stage. The temperature and salinity of the ore‐forming fluids were fluctuating and gradually decreased as the geologic history of the deposit progressed. The δDW‐SMOW values calculated for the ore‐forming fluids range from −97.4 to −65.1‰. The δ18O values of syn‐ore quartz occur mainly between 5.9 and 15.7‰; calculated δ18OW‐SMOW values are between −1.5 and +8.3‰. The δ34SCDT values of syn‐ore pyrite and galena range from 9.7 to 19.7‰. The ore‐forming fluids in the Shazhou U deposit are derived from different sources with a complex geological evolution history. The ore‐forming fluids from the early mineralization stage with high O2 contents may have been primarily derived from post‐volcanic hydrothermal activity. Subsequently, fluids from the main mineralization stage (with lower O2 and high H2 contents) might have originated from the deep‐sourced fluids, where sulphur was carried from the metamorphic basement. Finally, ore‐forming fluids from the late mineralization stage could have been produced by mixing meteoric hydrothermal fluids. Large‐scale fluid immiscibility and boiling occurred during the main mineralization stage, followed by fluid mixing during the late mineralization stage. Boiling and mixing of fluids were the two dominant mechanisms for the deposition of U in the Shazhou deposit.

Spatial distribution of the geochemical associations in the Babyak Mo-Ag-Au-W-Bi-base metal deposit, Western Rhodopes (Bulgaria): application of factor analysis

A new approach combining geochemical and mineralogical studies with statistical methods in the Babyak Mo-Ag-Au-W-Bi-base metal deposit is presented. The data are used for 3D geological modelling of the deposit and help to better understand the zonation of the elements and the complex geological evolution of the deposit.

Key problems on hydro-engineering-environmental geology along the Sichuan-Tibet Railway corridor: Current status and development direction

The Sichuan-Tibet Railway is a century project under construction. The complex geological evolution history has led to large differences in geo-environmental conditions along the railway. Hydrogeological, engineering geological, and environmental geological problems are complex and changeable, which deserves great attention in engineering construction and future operations. Based on a brief review of the past geological work on the Sichuan-Tibet Railway corridor, the hydro-engineering-environmental geological problems that may be faced during the railway construction have been described. The hydrogeological problems include 1) high-pressure water inrush from plateau tectonic karst, 2) high-pressure water inrush and mud outburst from faulted bedrock fissures, 3) high-temperature hot water thermal damage. The engineering geological problems include 1) active faults and strong earthquake disasters, 2) high in-situ stress and rock burst or large deformation in deep tunnel, 3) problem rocks or soils and their disaster effects, 4) high-position landslide disaster chain. The environmental geological problems include 1) acidic water corrosiveness from coal-bearing strata and hydrothermal deposits, 2) wetland ecological degradation, 3) interaction effects between the railway construction and the sensitive ecological environment. In the meanwhile, key scientific and technological issues, which should be deeply studied in the future, are put forward. In terms of hydrogeology, such as 1) sequence law of plateau karst development and types of tectonic karst water storage structures, 2) disaster-generating models and prediction methods of water and mud bursts in deep-buried tunnels, 3) active fault control mechanisms and geothermal water circulation models, 4) identification of high-temperature heat hazard risk and geothermal resources utilization technology. In terms of engineering geology and geohazard, such as 1) investigation of fine features of active faults and related engineering fault effects, 2) development features of deep tectonic stress fields in complex geological structures, 3) engineering geological properties of tectonic melange belts and related disaster effects, 4) surrounding rock stability and disaster effects of deep-buried tunnel under water-mechanical-thermal multi-field coupling condition, 5) mechanisms of high-position run-out landslide and risk control technology under internal and external dynamic coupling. In terms of environmental geology, such as 1) mechanisms of plateau multi-source water conversion cycle and the technology of ecological water demand control in the ecologically fragile area, 2) hydro-ecological environmental effect of tunnel construction, 3) key technology of ecological geological environment monitoring, evaluation and protection, 4) geo-ecological environmental effect of global climate warming, etc. From the view of combining non-profit geological surveys and commercial engineering surveys, a response strategy has been proposed that geological surveys are the foundation, scientific and technological research is the key, and the monitoring of potential hazards and engineering control should be promoted, which provides suggestions on developing direction for hydro-engineering-environmental geology work on major project planning areas.

Evolution of a fluvial-dominated delta during the Oligocene of the Colombian Caribbean: Sedimentological and ichnological signatures in well-cores

Basin analysis from Colombian Caribbean is particularly important given the interest in finding hydrocarbon reservoirs, but their complex geological evolution, and the frequent lateral and vertical variation of facies difficult a conclusive characterization, highlights the need for detailed sedimentological and ichnological studies. The study succession corresponds to an interval of a well core drilled in the south of the Sinú-San Jacinto Basin (Colombian Caribbean), with 1069 ft (~326 m) thick of an Oligocene siliciclastic succession, interpreted in general terms, as deposited in a deltaic system. The integrated sedimentological/ichnological analysis allows the differentiation of dominant facies, with predominant lithologies such as conglomerates, sandstones, mudrocks, bioclastic sediments, as well as coal beds. The ichnological assemblage is low in abundance and moderately diverse, composed by Conichnus, Cylindrichnus, Dactyloidites, Macaronichnus, Ophiomorpha, Phycosiphon, Skolithos, Taenidium, Teichichnus, and Thalassinoides, as well as rhizoliths.The complexity of the sedimentary system is reflected in its evolution throughout the Oligocene. A type succession with coarsening-upward trend was identified and it is repeated through the succession studied. It presents a general trend from bioclastic sediments (bioclastic conglomerates, sandstones and mudrocks) that pass into horizontal lamination and massive mudrocks occasionally bioturbated by Phycosiphon, and interbedded by mudrocks and sandstones with lenticular bedding, and the occurrence of Teichichnus. Above, bioturbated muddy sandstones with Ophiomorpha, Taenidium, Thalassinoides, and rarely Teichichnus, muddy sandstones with planar cross-lamination, and horizontal lamination sandstones with Dactyloidites, Ophiomorpha, Skolithos, and Thalassinoides are registered. Transition to carbonaceous mudrocks with Teichichnus, coal medium beds, and fine-to coarse-grained sandstones sometimes with Macaronichnus and/or Ophiomorpha is observed. Towards the top, are observed mudrocks with rhizoliths. This succession is interrupted by massive and horizontal lamination sandstones with low bioturbation index generated by the ichnological assemblage and/or by the exclusive occurrence of Ophiomorpha and/or Taenidium. Massive sandstones with erosive bases, asymmetrical ripples, and high content of organic debris are occasionally recorded. This succession reflects a progradational trend similar to those of fluvial-dominated deltaic sequences.Detailed analysis revealed that even the fluvial processes were dominant in the deltaic system; however, local tidal and wave influence is recorded. Moreover, integration of sedimentological and ichnological information allows characterizing the evolution of the different sub-environments of the deltaic system, as prodelta bay, distal delta front, proximal delta front, distributary channels, mouth bars, and lower delta plain, and this is essential for areas of economic interest.

The Mesoarchean Amikoq Layered Complex of SW Greenland: Part 2. Geochemical evidence for high-Mg noritic plutonism through crustal assimilation

AbstractWhole-rock major- and trace-element data are presented on a sample collection from the >3 Ga Amikoq Layered Complex (ALC), and hosting amphibolites within the Mesoarchean Akia terrane, SW Greenland. The lithologies range from leuconorite to melanorite/feldspathic orthopyroxenite, orthopyroxenite to harzburgite through to dunite, and tholeiitic basaltic–picritic mafic host rocks. The Amikoq Layered Complex samples are primitive (Mg#: 65–89) with elevated Ni and Cr contents. However, the absence of troctolitic lithologies and the presence of two orthopyroxene compositional trends, suggests that the successions might not be comagmatic. On the basis of trace-element cumulate models, relatively low Ni contents and minor negative Sr-Eu anomalies in some high-Ti ultramafic rocks, it is not possible to exclude a petrogenesis related to a melt similar to that of the mafic host-rocks. Ultramafic samples with U-shaped trace-element distribution patterns are petrogenetically related to the noritic sequences, either through cumulus mineral accumulation or melt-rock reactions. Assimilation-fractional-crystallisation modelling of melanorites nevertheless require the parental melt to have been contaminated/mixed with a component of island-arc-like tholeiite affinity. A boninite-like parental melt might have been derived from the subcontinental lithospheric mantle of the Akia terrane, or alternatively via assimilation of an ultramafic parental melt with island-arc-like tholeiite. Given the complex geological evolution and high-grade metamorphic overprint of the Amikoq Layered Complex, we are unable to differentiate between the two models.

Exploring structured scripting cartographic technique of GMT for ocean seafloor modeling: A case of the East Indian Ocean

This paper examines spatial variations in the geomorphology of the Ninety East Ridge (NER), located in the Indian Ocean. The NER is an extraordinary long linear bathymetric feature with topography reflecting complex geophysical setting and geologic evolution. The research is based on a compilation of high-resolution bathymetric, geological, and gravity datasets clipped for the study area extent (65° - 107°E, 35°S - 21°N): General Bathymetric Chart of the Oceans (GEBCO), Earth Gravitational Model (EGM2008, EGM96). The submarine geomorphology of the NER was modeled by digitized cross-sectional profiles using Generic Mapping Tools (GMT). The availability of the method is explained by 1) the free datasets; 2) the open source GMT toolset; 3) the available tutorials of the GMT and the codes explained in this work. Three segments of the NER were selected, digitized, and modeled: 1) northern 89°E, 7°S to 90°E, 7°N; 2) central 88.4°E, 14.7°S to 88.8°E, 8.2°S; 3) southern 87.9°E, 17°S to 87.5°E, 27°S. Measured depths were visualized in graphs, compared, and statistically analyzed by the histograms. The northern segment has a steepness of 21.3° at the western slopes, and 14.5° at the eastern slope. The slopes on the eastern flank have dominant SE orientation. The central segment has a bell-shaped form, with the highest steepness comparing to the northern and southern segments. The eastern flank has a steepness of 49.5°. A local depression at a distance of 50 km off from the axis (90°E) continues parallel to the NER, with the shape of the narrow minor trench. The western slope has a steepness of 57.6°, decreasing to 15.6°. The southern segment has a dome-like shape form. Compared to the northern and central segments, it has a less pronounced ridge crest, with a steepness of 24.9° on the west. The eastern flank has a steepness of 36.8° until 70 km, gradually becoming steeper at 44.23°. A local minor trench structure can be seen on its eastern flank (100 km off the axis). This corresponds to the very narrow long topographic depressions stretching parallel to this segment of the NER at 90.5°E. The study contributes to regional geographic studies of Indian Ocean geomorphology and cartographic presentation of GMT functionality for marine research and oceanographic studies.