COMPASS RICH-1 Research Articles

Long term experience with perfluorobutane in COMPASS RICH

COMPASS RICH-1 has used high-purity perfluorobutane as radiator gas since 2001. The operation and control of the radiator gas has evolved over years with continuous improvements. We report on the experience gained in the 20 year-long operation of perfluorobutane as COMPASS RICH radiator.Very accurate values for the radiator gas refractive index are needed for high-performance particle identification. The procedure has evolved over years and the one presently in use, which provides refractive index estimate at the 1 ppm level, is discussed.Perfluorobutane procurement is becoming challenging, and the minimization of material waste is now a priority for the protection of the environment. Commercially available perfluorobutane needs dedicated filtering before usage and typical material losses in the filtering procedure were around 30%. Recent efforts allowed us to reduce them to about 5%. A potential alternative to fluorocarbon radiators in gaseous RICHes is also presented.

The high voltage system of the novel MPGD-based photon detectors of COMPASS RICH-1 and its development towards a scalable High Voltage Power Supply System for MPGDs

The COMPASS RICH-1 detector has undergone a major upgrade in 2016 with the installation of four novel MPGD-based photon detectors. They consist of large-size hybrid MPGDs with multi-layer architecture composed of two layers of Thick-GEMs and bulk resistive MicroMegas. A dedicated high voltage power supply system, based on CAEN HV modules, has been built and put in operation: it controls more than 100 HV channels. The system is required to protect the detectors against errors by the operator, monitor voltages and currents at a 1 Hz rate and automatically react to detector misbehavior. It includes also a HV compensation system against environmental pressure and temperature variation to grant the detector stability. The operation of a MPGD based single photon detector poses challenging requirements to the high voltage power supply systems employed in terms of high-resolution diagnostic features and dynamic voltage control. Systems satisfying all the needed features are not commercially available; for this reason a novel single channel high voltage system matching the MPGD needs has been designed and realized. In this article the COMPASS RICH-1 MPGD HV system implementation is described as well as its performance in terms of stability of the novel MPGD-based photon detectors during the physics data taking at COMPASS. The design, implementation and performance of a novel HV power supply system based on DC to DC converters and controlled by a FPGA device is presented. The capabilities of the first prototype of the new single HV channel power supply are illustrated when operated with a MPGD based single photon detector during a test beam exercise. The preliminary result of the multi channel system are briefly discussed.

The high voltage system the novel MPGD-based photon detectors of COMPASS RICH-1 and its development towards a scalable HVPSS for MPGDs

The COMPASS RICH-1 detector underwent major upgrade in 2016 with the installation of four novel MPGD-based photon detectors. They consist of large-size hybrid MPGDs with multi-layer architecture composed of two layers of Thick-GEMs and bulk resistive Micromegas. A dedicated high voltage power supply system, realized with commercial devices, has been put in operation to protect the detectors against errors by the operator, monitor and log voltages and currents at a 1 Hz rate, and automatically react to detector misbehavior; it includes also the HV compensation for the detector gas pressure and temperature variations.The needs posed to the high voltage power supply systems by the operation of Micro Pattern Gaseous Detectors pushed the development of a novel single channel HV system able to overcome the performance of the commercial devices in terms of high-resolution diagnostic features and intelligent dynamic voltage control. In this talk the COMPASS HV system and its performance are illustrated, as well as the stability of the novel MPGD-based photon detectors during the physics data taking at COMPASS. The performance of the novel single channel power supply system when connected to a single photon Micro Pattern Gaseous Detector is presented in realistic working condition during a test beam with the preliminary results of multiple channels operation.

The COMPASS RICH-1 MPGD based photon detector performance

In 2016 we have upgraded the COMPASS RICH by novel gaseous photon detectors based on MPGD technology. Four new photon detectors, covering a total active area of 1.5 m 2, have been installed in order to cope with the challenging efficiency and stability requirements of the COMPASS physics programme. The new detector architecture consists in a hybrid MPGD combination: two layers of THGEMs, the first of which also acts as a reflective photocathode thanks to CsI coating, are coupled to a bulk Micromegas on a pad-segmented anode. These detectors are the first application in an experiment of MPGD-based single photon detectors. Presently, we are further developing the MPGD-based PDs to make them adequate for a setup at the future EIC collider. All aspects of the COMPASS RICH-1 Photon Detectors upgrade are presented: R&D, engineering, mass production, QA and performance; the on-going development for collider application is also presented.

MPGD-based photon detectors for the upgrade of COMPASS RICH-1 and beyond

COMPASS is a fixed target experiment at CERN SPS aimed to study hadron structure and spectroscopy. Hadron identification in the momentum range between 3 and 55 GeV/c is provided by a large gaseous Ring Imaging Cherenkov Counter, RICH-1. To cope with the challenges imposed by the new physics program of COMPASS, RICH-1 has been upgraded by replacing four MWPC-based photon detectors with newly developed MPGD-based photon detectors. The architecture of the novel detectors is a hybrid combination of two layers of THGEMs and a Micromegas. The top of the first THGEM is coated with CsI acting as a reflective photo-cathode. The anode is segmented in pads capacitively coupled to the APV-25 based readout. The new hybrid detectors have been commissioned during the 2016 COMPASS data taking and stably operated during the 2017 run. In this paper design, construction, operation and performance aspects of the novel photon detectors for COMPASS RICH-1 are discussed.

The MPGD-Based Photon Detectors for the upgrade of COMPASS RICH-1

After pioneering gaseous detectors of single photon for RICH applications using CsI solid state photocathodes in MWPCs within the RD26 collaboration and by the constructions for the RICH detector of the COMPASS experiment at CERN SPS, in 2016 we have upgraded COMPASS RICH by novel gaseous photon detectors based on MPGD technology. Four novel photon detectors, covering a total active area of 1.5 m2, have been installed in order to cope with the challenging effciency and stability requirements of the COMPASS physics programme. They are the first application in an experiment of MPGD-based single photon detectors. All aspects of the upgrade are presented, including engineering, mass production, quality assessment and performance.Perspectives for further developments in the field of gaseous single photon detectors are also indicated.

The high voltage system with pressure and temperature corrections for the novel MPGD-based photon detectors of COMPASS RICH-1

The novel MPGD-based photon detectors of COMPASS RICH-1 consist of large-size hybrid MPGDs with multi-layer architecture including two layers of Thick-GEMs and a bulk resistive MicroMegas. The top surface of the first THGEM is coated with a CsI film which also acts as photo-cathode. These detectors have been successfully in operation at COMPASS since 2016. Concerning bias-voltage supply, the Thick-GEMs are segmented in order to reduce the energy released in case of occasional discharges, while the MicroMegas anode is segmented into pads individually biased with positive voltage while the micromesh is grounded. In total, there are about ten different electrode types and more than 20000 electrodes supplied by more than 100 HV channels, where appropriate correlations among the applied voltages are required for the correct operation of the detectors. Therefore, a robust control system is mandatory, implemented by a custom designed software package, while commercial power supply units are used. This sophisticated control system allows to protect the detectors against errors by the operator, to monitor and log voltages and currents at 1 Hz rate, and automatically react to detector misbehaviour. In addition, a voltage compensation system has been developed to automatically adjust the biasing voltage according to environmental pressure and temperature variations, to achieve constant gain over time. This development answers to a more general need. In fact, voltage compensation is always a requirement for the stability of gaseous detectors and its need is enhanced in multi-layer ones. In this paper, the HV system and its performance are described in details, as well as the stability of the novel MPGD-based photon detectors during the physics data taking at COMPASS.

The hybrid MPGD-based photon detectors of COMPASS RICH-1

Abstract Novel gaseous detectors of single photons for RICH applications have been developed and installed on COMPASS RICH-1 in 2016, covering a total area of 1.4 m2. They have a hybrid architecture consisting of two staggered THGEM layers (one equipped with a CsI photoconverting layer) and a bulk Micromegas and operate stably and efficiently, providing a single photon angular resolution of ∼ 1.8 mrad and about 10 detected photons per ring at saturation. The main aspects of their construction, commissioning, characterization and performance are presented.

The MPGD-based photon detectors for the upgrade of COMPASS RICH-1 and beyond

After pioneering gaseous detectors of single photon for RICH applications using CsI solid state photocathodes in MWPCs within the RD26 collaboration and by the constructions for the RICH detector of the COMPASS experiment at CERN SPS, in 2016 we have upgraded COMPASS RICH by novel gaseous photon detectors based on MPGD technology. Four novel photon detectors, covering a total active area of 1.5m2 have been installed in order to cope with the challenging efficiency and stability requirements of the COMPASS physics programme. They are the first application in an experiment of MPGD-based single photon detectors. All aspects of the upgrade are presented, including engineering, mass production, quality assessment and performance. Perspectives for further developments in the field of gaseous single photon detectors are also presented.

Status of COMPASS RICH-1 Upgrade with MPGD-based Photon Detectors

A Set of new MPGD-based Photon Detectors is being built for the upgrade of COMPASS RICH-1. The detectors cover a total active area of 1.4 m2 and are based on a hybrid architecture consisting of two THGEM layers and a Micromegas. A CsI film on one THGEM acts as a reflective photocathode. The characteristics of the detector, the production of the components and their validation tests are described in detail.

Evolution and recent developments of the gaseous photon detectors technologies

The evolution and the present status of the gaseous photon detectors technologies are reviewed. The most recent developments in several branches of the field are described, in particular the installation and commissioning of the first large area MPGD-based detectors of single photons on COMPASS RICH-1. Investigation of novel detector architectures, different materials and various applications are reported, and the quest for visible light gaseous photon detectors is discussed. The progress on the use of gaseous photon detector related techniques in the field of cryogenic applications and gaseous or liquid scintillation imaging are presented.

Novel MPGD based detectors of single photons in COMPASS RICH-1

COMPASS is a fixed target experiment at CERN SPS aimed to study Hadron Structure and Spectroscopy. Hadron Identification in the momentum range between 3 and 55 GeV/c is provided by a large gaseous Ring Imaging Cherenkov Counter (RICH-1). To cope with the challenges imposed by the new physics program of COMPASS, RICH-1 has been upgraded by replacing four MWPCs based photon detectors with newly developed MPGD based photon detectors. The architecture of the novel detectors is a hybrid combination of two layers of THGEMs and a MicroMegas. The top of the first THGEM is coated with CsI acting as a reflective photo-cathode. The anode is segmented in pads capacitively coupled to the APV-25 based readout. The new hybrid detectors have been commissioned during 2016 COMPASS data taking and stably operated during 2017 run. In this paper all aspects of the novel photon detectors for COMPASS RICH-1 are discussed.

Status and perspectives of gaseous photon detectors

The evolution and the present status of the gaseous photon detectors technology are reviewed. Recent developments in several branches of the field are described, in particular the installation of the first large area MPGD-based detectors of single photons for the upgrade of COMPASS RICH-1. Promising advancement in cryogenic and other applications of gaseous photon detector related techniques are mentioned and the quest for visible light gaseous photon detectors is discussed.

The MPGD-based photon detectors for the upgrade of COMPASS RICH-1

The RICH-1 Detector of the COMPASS experiment at CERN SPS has undergone an important upgrade for the 2016 physics run. Four new photon detectors, based on Micro Pattern Gaseous Detector technology and covering a total active area larger than 1.2m2 have replaced the previously used MWPC-based photon detectors. The upgrade answers the challenging efficiency and stability quest for the new phase of the COMPASS spectrometer physics programme. The new detector architecture consists in a hybrid MPGD combination of two Thick Gas Electron Multipliers and a MicroMegas stage. Signals, extracted from the anode pad by capacitive coupling, are read-out by analog F-E based on the APV25 chip. The main aspects of the COMPASS RICH-1 photon detectors upgrade are presented focussing on detector design, engineering aspects, mass production, the quality assessment and assembly challenges of the MPGD components. The status of the detector commissioning is also presented.

Status of the development of large area photon detectors based on THGEMs and hybrid MPGD architectures for Cherenkov imaging applications

We report about the development status of large area gaseous single photon detectors based on a novel hybrid concept for RICH applications.The hybrid concept combines Thick Gaseous Electron Multipliers (THGEMs) coupled to CsI, working as a photon sensitive pre-amplification stage, and Micromegas, as a multiplication stage. The most recent achievements within the research and development programme consist in the assembly and study of 300×300mm2 hybrid photon detectors, the optimization of front-end electronics, and engineering towards large area detectors. Hybrid detectors with an active area of 300×300mm2 have been successfully operated in laboratory conditions and at a CERN PS T10 test beam, achieving effective gains in the order of 105 and good time resolution (σ=7ns); APV25 front-end chips have been coupled to the detector resulting in noise levels lower than 1000 electrons; the production and characterization of 300×600mm2 THGEMs is ongoing.A set of hybrid detectors with 600×600mm2 active area is envisaged to upgrade COMPASS RICH-1 at CERN in 2016.

The gain in Thick GEM multipliers and its time-evolution

In the context of a project to upgrade the gas photon detectors of COMPASS RICH-1, we have performed an R&D programme aimed to develop photon detectors based on multi-layer arrangements of thick GEM electron multipliers coupled to a CsI photoconverter. For this purpose, thick GEMs have been characterised in detail including the gain performance, its dependance on the geometrical parameters and its time-evolution, a feature exhibited by the gas detectors with open insulator surfaces. The variation due to this evolution drammatically depends on the parameters themselves.In the present article we summarise the outcomes of the studies dedicated to the thick GEM gain and its evolution versus time. We also include a qualitative model which accounts for the peculiar details of the observed thick GEM gain time-evolution.

Long term experience and performance of COMPASS RICH-1

COMPASS RICH-1 is a large size gaseous Imaging Cherenkov Detector providing hadron identification in the range from 3 to 55 GeV/c, in the wide acceptance spectrometer of the COMPASS Experiment at CERN SPS.It uses a 3 m long C4F10 radiator, a 21 m2 large VUVmirror surface and two kinds of photon detectors: MAPMTsand MWPCs with CsI photocathodes, covering a total of 5.5 m2.It is in operation since 2002 and its performance increased thanks to progressiveoptimization and to a major upgrade of its photon detection system, implementedin 2006; a new upgrade is foreseen for 2016, with the use of MPGD-basedphoton detectors.The main characteristics of COMPASS RICH-1 components are described andthe most critical aspectsrelated to the C4F10 radiator gas system, to the mirrors and their alignment,as well as the performance of the photon detectors are presented and discussed.The response of the MWPCs and the observed evolution of the effective quantumefficiency of the CsI photocathodes is analyzed.The properties and performance of the MAPMTs with individual fused lens telescopesare presented together with the readout characteristics.The PID performance of COMPASS RICH-1 is discussed and the future upgrade programis mentioned.

MPGD-based counters of single photons developed for COMPASS RICH-1

In fundamental research, gas detectors of single photons are a must in the field of Cherenkov imaging techniques (RICH counters) for particle identification in large momentum ranges and with wide coverage of the phase space domain. These counters, already extensively used, are foreseen in the setups of future experiments in a large variety of fields in nuclear and particle physics. The quest of novel gaseous photon detector is dictated by the fact that the present generation of detectors has unique characteristics concerning operation in magnetic field, low material budget and cost, but it suffers of severe limitations in effective efficiency, rates, life time and stability, discouraging their use in high precision and high rate experiments. We are developing large size THick GEM (THGEM)-based detector of single photons. The R&D program includes the complete characterization of the THGEM electron multipliers, the study of the aspects related to the detection of single photons and the engineering towards large size detector prototype. Our most recent achievements include: dedicated studies concerning the ion back-flow to the photo-cathode; relevant progress in the engineering aspects, in particular related to the production of large-size THGEMs, where the strict correlation between the local gain-value and the local thickness-value has been demonstrated the operation of a 300 mm × 300 mm2 active area detector at the CERN PS T10 test beam; the introduction of a new hybrid detector architecture offering promising indication, which is formed by a THGEM layer which acts as CsI support and pre-amplification device followed by a MICROMEGAS multiplication stage. The general status of the R&D program and the recent progress are reported

Monitoring of absolute mirror alignment at COMPASS RICH-1 detector

The gaseous COMPASS RICH-1 detector uses two spherical mirror surfaces, segmented into 116 individual mirrors, to focus the Cherenkov photons onto the detector plane. Any mirror misalignment directly affects the detector resolution. The on-line Continuous Line Alignment and Monitoring (CLAM) photogrammetry-based method has been implemented to measure the alignment of individual mirrors which can be characterized by the center of curvature. The mirror wall reflects a regular grid of retroreflective strips placed inside the detector vessel. Then, the position of each mirror is determined from the image of the grid reflection. The images are collected by four cameras. Any small mirror misalignment results in changes of the grid lines’ positions in the image. The accuracy limits of the CLAM method were checked by laser interferometry and are below 0.1mrad.

THGEM-based photon detectors for the upgrade of COMPASS RICH-1

New Cherenkov photon detectors are being developed for the upgrade of COMPASS RICH-1. The detectors are based on THGEMs, arranged in a three layer architecture, with a CsI film on the first layer acting as a reflective photocathode. The response of THGEMs with various geometries under different conditions has been studied and photon detector prototypes have been built, tested in laboratory and operated during test beam runs providing a typical gain of 105 and a time resolution of better than 10ns. A photon detector prototype with 300×300mm2 active area, operated at the CERN PS T10 test beam in November 2012, has confirmed the validity of this novel technology and has allowed further studies of the detector response.