Compact Resonator Research Articles

Design of miniaturized and highly selective frequency selective rasorber based on compact spiral resonator

Design of miniaturized and highly selective frequency selective rasorber based on compact spiral resonator

A compact wideband filtering rectangular dielectric resonator antenna with U-shaped metal strips

ABSTRACT In this paper, a compact wideband filtering rectangular dielectric resonator antenna (RDRA) loaded with a pair of U-shaped metal strips is proposed. By using a slot-coupled feeding structure, a rectangular DR with a length–width ratio of 3:1 is selected to combine the resonant frequencies of the TE 111 and TE 121 modes to achieve the passband. Two pairs of transverse branches with different lengths are added to the longitudinal microstrip feeding line, and the TE 111 , TE 11+δ1 , and TE 121 modes are successfully excited to enhance the bandwidth. The short pair of transverse branches can generate a null high-frequency radiation. A pair of U-shaped metal strips is loaded at both ends of the top of rectangular DR, introducing a low-frequency radiation null. Both radiation nulls can be independently adjusted. A pair of rectangular grooves is etched inside rectangular DR to boost the impedance matching level. The proposed filtering RDRA has been fabricated and measured for verification. The measured relative impedance bandwidth is 22.67% (4.34–5.45 GHz). The measured average gain and peak gain are 7.19 dBi and 8.06 dBi, respectively. RDRA filtering has broad application potential in modern communications, such as the N79 band.

Compact dual-band enhanced bandwidth 5G mm – wave MIMO dielectric resonator antenna utilizing metallic strips

A compact dual-band Multiple-Input Multiple-Output Dielectric Resonator Antenna with improved bandwidth for 5G mm-wave applications is presented. Two rectangular DRAs mounted on a substrate backed ground plane are excited by microstrip feed through aperture coupling. Notches cut out from center of the DRAs helps to achieve a dual-band response with improved bandwidth by exciting several modes. The isolation between the DRAs is achieved by appropriately positioning metallic strips on walls on of the DRAs. A dual-band response with enhanced bandwidth and mutual coupling reduction. The impedance bandwidth for the proposed design is between 26.5–30 GHz (12.4 %) and 34.2–40 GHz (15.6 %). The maximum isolation achieved in the lower band is 32 dB and above 45 dB in the upper band. The overall size of the design is 1.88λo x 0.94λo x 0.20λo. The design procedure is described, and the role of decoupling strips are explained. A prototype is fabricated and measured to validate the proposed design.

Narrow bandwidth spectral beam combining of cm bar in a short external resonator based on rhombic prism combinations

A novel narrow bandwidth spectral beam combining structure of cm bar with a short external resonator based on rhombic prism combinations is proposed and demonstrated. A pair of rhombic prism combinations are employed between the LDA and the transform lens in the external resonator, which consists of a rectangular quartz plate in the middle and two quartz rhombic prisms on either side in opposite orientations in each combination. The beam emitted from a standard cm bar is segmented and rearranged, and spectral beam combining is carried out along the slow axis. A spectral bandwidth of about 5.46 nm is obtained by employing a transform lens with a short focal length of 150 mm, which is only about 1/3 of that of the conventional spectral beam combining, and a narrow spectral bandwidth of 1.14 nm is obtained when a 5x de-magnifying telescope is employed in the above external resonator, the distance between LDA and diffraction grating is 500 mm while that between LDA and output coupler is 650 mm. This novel structure provides a compact external resonator scheme for narrow bandwidth spectral beam combining.

Kinetic inductance compact resonator with NbTiN micronwires

Kinetic inductance compact resonator with NbTiN micronwires

Design of CRLH-TL BPF with controllable attenuation poles

Compact and pole-controllable resonators and bandpass filter (BPF) using a composite right/left-handed transmission line (CRLH-TL) are designed in this study. The distributed constant line in the CRLH-TL has applied a tap-coupling technique, and one tap-coupled stub is loaded with the left-handed (LH) circuit. Attenuation poles are generated when the input susceptance of the stub diverges. In the tap-coupled CRLH-TL resonator, the attenuation pole is controlled at either the desired lower or higher region frequency than a resonant frequency by adjusting the circuit parameters. Also, the BPF constructed by the CRLH-TL resonators is designed based on a filter design theory, where the attenuation poles are located at lower and higher region frequencies than a negative-first-order frequency. The BPF with microstrip structure is fabricated using MEGTRON6 R-5775 (εr\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\varepsilon _\ ext {r}$$\\end{document}: 3.7, h: 0.63 mm, t: 18 μm), chip capacitors, and wire inductors. The simulated results show that the desired characteristics are approximately satisfied, i.e., we can design the CRLH-TL BPF which is controllable for the attenuation poles at both lower and higher region frequencies than a resonant frequency. The measured results are good agreement with the simulation. The negative-first-order frequency is generated at 2.00 GHz with 133 MHz bandwidth, i.e., the fractional bandwidth is 6.65 %. The resonator lengths in the BPF are shortened by 81.5 % and 75.0 % in comparison with a conventional half-wavelength (λ/2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\lambda /2$$\\end{document}) openstub, and the size of the fabricated BPF is 0.18 λg×\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\lambda _\ ext {g} \ imes$$\\end{document} 0.17 λg\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\lambda _\ ext {g}$$\\end{document}. Therefore, a compact BPF with two controllable attenuation poles is realized by the tap-coupled CRLH-TL.

Compact wide dual-band square dielectric resonator antenna to serve X-band/emerging 5G communication

This communication presents a new dual-band, compact, and low-cost square-shaped dielectric resonator antenna (SDRA). A square dielectric, Alumina_96 pct of compact dimension 10 × 10× 3 mm3 is mounted on the coplanar ground on the top of the substrate RO4003. The antenna is excited by employing the aperture coupling method via a rectangular-ring slot. This newly designed slot-coupled SDRA exhibits wide dual-band characteristics, resonating at frequencies 8.65 GHz and 11.08 GHz. The proposed compact SDRA is fabricated. The fabricated SDRA is measured for evaluation of its performance parameters. The measured results are fairly matching with the simulation results. The gain and efficiency at 8.65 GHz in the lower band are measured as 6.25 dBi and 96 %, respectively. The gain of the upper band is maintained at 4.32 dBi with an efficiency of 94.56 %. Measured stable far-field outcomes validate the suggested SDRA suitable for X-Band/emerging 5G Communication.

Non-reciprocity in a silicon photonic ring resonator with time-modulated regions

Non-reciprocity and breaking of the time-reversal symmetry is conventionally achieved using magneto-optic materials. However, the integration of these materials with complementary metal-oxide semiconductor (CMOS)-compatible platforms is challenging. Temporal modulation is a well-suited approach for achieving non-reciprocity in integrated photonics. However, existing experimental implementations based on this method in silicon uses traveling-wave modulation in the whole structure or tandem ring or waveguide modulators, and they lead to high insertion loss and large footprint. In this work we achieve, to the best of our knowledge, the first experimental demonstration of non-reciprocity in a compact single silicon photonic ring resonator with time-modulated regions, fabricated with a CMOS-compatible commercial foundry. We demonstrate symmetry breaking of counter-rotating modes in an active silicon photonic ring resonator by applying phase-shifted RF signals to only two small p-i-n junctions on the ring, without employing traveling-wave modulation in the whole structure. The non-reciprocity is caused by the cross-coupling between the counter-rotating modes of the ring, which breaks their degeneracy. By reversing the polarity of the RF phase difference (e.g. (45°,−45°) asymmetric phases) opposite resonance wavelengths are obtained, with a 16-dB contrast between the transmissions of the asymmetric phases and a low insertion loss of 0.6 dB under 27 dBm RF power. We achieve the highest ratio of the asymmetric transmission to the insertion loss, among the state-of-the-art silicon non-reciprocal integrated optical structures based on time varying modulation. The non-reciprocal ring can be used as a magnetic-free, low-loss, compact, and CMOS-compatible integrated optical isolator.

Dual band high tuning range frequency reconfigurable dielectric resonator antenna for sub-6 GHz applications

ABSTRACT A high-tuning range frequency reconfigurable dual-band compact cylindrical Dielectric Resonator Antenna (DRA) for 5 G Sub 6 GHz applications is presented in the proposed work. The work presented here provides compactness, frequency reconfigurability (FR), and dual-band. FR is obtained through two PIN diode switches, which operate in ON-ON, ON-OFF, OFF-ON, and OFF-OFF configurations and offer a maximum wide tuning range and a total spectrum of 44.44% and 71.49%, respectively. In the cylindrical DRA, the HE M 11 δ and HE M 12 δ modes create dual-band, while the hybrid structure and higher order mode excitation yield compactness.

A compact dielectric resonator antenna with wideband circular polarization characteristics for C and X‐band applications

AbstractA wideband circularly polarized (CP) stacked rectangular dielectric resonator antenna (RDRA) is proposed in this article. The 3 dB axial ratio (AR) and 10 dB impedance bandwidth overlap of more than 66% is obtained. For increased bandwidth, the antenna comprises two dielectric resonators separated by an air gap. The upper dielectric layer is rotated at relative to the lower layer to obtain orthogonal modes for CP Both layers have dielectric constant . The rotation aids excitation of orthogonal modes , and in RDRA. The higher‐order modes generate left‐hand circular polarization at frequencies 6.75, 7.8, and 10.7 GHz, respectively. The upper layer consists of three holes giving a 10 dB impedance bandwidth of 66.7% from 6.52 to 11.02 GHz. The CP gain of 8.7, 6.8, and 6.4 dBi for 6.75, 7.8, and 10.7 GHz, respectively, is measured. The conformal orthogonal feeds enable a 72 3 dB AR bandwidth across the entire frequency band. The radiation efficiency is observed above 89 in the entire band (6.5–11 GHz). This work demonstrates a 66.7 overlap of 10 dB impedance and 3 dB AR bandwidth along with high gain in a single design which is suitable for 5G applications in C‐band as well as other X‐band applications.

Monolithic optical resonator for ultrastable laser and photonic millimeter-wave synthesis

Optical resonators are indispensable tools in optical metrology that usually benefit from an evacuated and highly-isolated environment to achieve peak performance. Even in the more sophisticated design of Fabry-Perot (FP) cavities, the material choice limits the achievable quality factors. For this reason, monolithic resonators are emerging as promising alternative to traditional designs, but their design is still at preliminary stage and far from being optimized. Here, we demonstrate a monolithic FP resonator with 4.5 cm3 volume and 2 × 105 finesse. In the ambient environment, we achieve 18 Hz integrated laser linewidth and 7 × 10−14 frequency stability measured from 0.08 s to 0.3 s averaging time, the highest spectral purity and stability demonstrated to date in the context of monolithic reference resonators. By locking two separate lasers to distinct modes of the same resonator, a 96 GHz microwave signals is generated with phase noise -100 dBc/Hz at 10 kHz frequency offset, achieving orders of magnitude improvement in the approach of photonic heterodyne synthesis. The compact monolithic FP resonator is promising for applications in spectrally-pure, high-frequency microwave photonic references as well as optical clocks and other metrological devices. ©2024. All rights reserved.

Demonstration of 4H-silicon carbide on an aluminum nitride integrated photonic platform.

The existing silicon-carbide-on-insulator photonic platform utilizes a thin layer of silicon dioxide under silicon carbide (SiC) to provide optical confinement and mode isolation. Here, we replace the underneath silicon dioxide layer with 1-µm-thick aluminum nitride and demonstrate a 4H-silicon-carbide-on-aluminum-nitride integrated photonic platform for the first time to our knowledge. Efficient grating couplers, low-loss waveguides, and compact microring resonators with intrinsic quality factors up to 210,000 are fabricated. In addition, by undercutting the aluminum nitride layer, the intrinsic quality factor of the silicon carbide microring is improved by nearly one order of magnitude (1.8 million). Finally, an optical pump-probe method is developed to measure the thermal conductivity of the aluminum nitride layer, which is estimated to be over 30 times of that of silicon dioxide.

Entangled photon pair generation in an integrated SiC platform

Entanglement plays a vital role in quantum information processing. Owing to its unique material properties, silicon carbide recently emerged as a promising candidate for the scalable implementation of advanced quantum information processing capabilities. To date, however, only entanglement of nuclear spins has been reported in silicon carbide, while an entangled photon source, whether it is based on bulk or chip-scale technologies, has remained elusive. Here, we report the demonstration of an entangled photon source in an integrated silicon carbide platform for the first time. Specifically, strongly correlated photon pairs are efficiently generated at the telecom C-band wavelength through implementing spontaneous four-wave mixing in a compact microring resonator in the 4H-silicon-carbide-on-insulator platform. The maximum coincidence-to-accidental ratio exceeds 600 at a pump power of 0.17 mW, corresponding to a pair generation rate of (9 ± 1) × 103 pairs/s. Energy-time entanglement is created and verified for such signal-idler photon pairs, with the two-photon interference fringes exhibiting a visibility larger than 99%. The heralded single-photon properties are also measured, with the heralded g(2)(0) on the order of 10−3, demonstrating the SiC platform as a prospective fully integrated, complementary metal-oxide-semiconductor compatible single-photon source for quantum applications.

Compact maze-shaped meta resonator for high-sensitive S-band low permittivity characterization

This paper proposed a compact, high-sensitive S-band microwave sensor for low permittivity characterization. The proposed microwave sensor is inspired by a metamaterials-based maze-shaped split-ring resonator (MS-SRR) configuration, and its overall dimensions are 25 mm × 20 mm × 0.79 mm. The unloaded state of the proposed sensor achieved two robust band-stop notches in its transmission response at 2.77 GHz and 3.08 GHz, respectively. These distinctive features enable the real-time measurement of permittivity in low-permittivity materials. The MS-SRR configuration accomplished strong electric-field intensity, which increased the interaction between the field and testing material, resulting in a highly sensitive measurement. A sensitivity of 11.91% is observed for the first resonance peak and 12.01% for the second peak within the permittivity range from 1 to 2.0. Moreover, the proposed sensor is also competent in measuring the permittivity range between 3 and 10 with a sensitivity of 9.47%–4.93% for the first peak and 9.57%–4.83% for the second peak. The resonance frequency shifting by the influence of material under test (MUT) is presented as a function of permittivity using a regression model. The simulated, measured and formulated results agree well. Finally, the proposed compact and high-sensitive microwave sensor holds promise for low permittivity characterization applications.

A compact, low‐loss, and wide passband ratio substrate integrated waveguide triplexer based on complementary split ring resonators for multiband applications

SummaryIn this paper, a design of a substrate‐integrated waveguide (SIW) triplexer with improved low‐loss performance, passband ratio, and compactness based on the complementary split ring resonator (CSRR) structure is presented. The proposed triplexer operates at three passbands of 6, 8, and 10 GHz that correspond to the passband ratios of 1.33 and 1.67. By appropriately designing square CSRRs on the surface of the SIW structure, the low‐loss and compact resonator filters below the cut‐off frequency of the SIW at each operation frequency can be realized. The wide passband ratio is obtainable by adjusting the dimensions of the T‐junction. The measured results show the minimum insertion losses of 1.5, 1.4, and 1.9 dB at 6, 8, and 10 GHz, respectively. In addition, the minimum measured return losses are −9.33, −11.3, and −12.4 dB at the corresponding three passbands. The measured isolation between output ports is better than −17 dB in the frequency range from 5 to 11 GHz. The measured results agree well with simulations which are conducted by the CST Microwave Studio simulator. The proposed triplexer is designed on a cost‐effective RO4003C substrate with a compact size of 35 25 mm2

Efficient continuous-wave and passively Q-switched Nd:GSAG laser operating at 1.3 μm

We report on the laser performance of neodymium-doped gadolinium scandium aluminum garnet (Nd:GSAG) crystals at 1.3 μm for the first time, to the best of our knowledge. An efficient continuous-wave (CW) laser at 1336 nm and on output power of up to 2.01 W was obtained under an absorbed pump power of 4.89 W with slope and optical-to-optical efficiencies of 43.4 % and 41.1 %, respectively. Furthermore, a passively Q-switched (PQS) laser with a Co:MgAl2O4 crystal serving as a saturable absorber in a compact plano-plano resonator cavity was examined. A maximum average output power of 0.2 W was obtained with a pulse width, pulse energy, and peak power of 34.4 ns, 22.2 µJ, and 645 W, respectively. Our results indicated that Nd:GSAG crystals are promising for producing high-efficiency CW lasers and effective PQS lasers at 1336 nm.

Compact quad element dual band high gain MIMO rectangular dielectric resonators antenna for 5G millimeter wave application

In this article, a compact dual-band quad-port Multiple Input Multiple Output (MIMO) Rectangular Dielectric Resonator Antenna (RDRA) with a defected connected ground Geometry (DCGG) for 5G millimeter-wave (mm-wave) application is presented. The antenna is operating at 24 GHz to 32 GHz frequency range. The antenna configuration comprises four identical rectangular microstrip radiators mounted on an RT Duroid 5880 substrate (20 × 20 × 0.254) mm3. To enhance bandwidth, each radiator is equipped with both rectangular and circular-shaped ring slots. To improve the performance of the 4 port MIMO antenna, RDRAs are placed over each radiator and optimized. The MIMO RDRs exhibit dual-band with 4.24 GHz and 0.46 GHz bandwidths. The MIMO RDRA achieves exceptional isolation (>27 dB), high gain (8.24 dB), and more than 94 % radiation efficiency. The diversity parameters exhibit a low Envelope Correlation Coefficient (ECC) of 0.0006, and a high Diversity Gain (DG) of 9.97 dB is achieved, highlighting the effectiveness of the antenna system in providing diversity reception and improving communication reliability in challenging environments. Hence, the proposed MIMO antenna is compact, making it suitable for integration into small 5G devices or systems where space is limited, such as IoT devices, mobile phones, or small base stations at mm-wave frequency bands.

Compact triple decagon split ring resonator metamaterial for liquid sensing applications

Compact triple decagon split ring resonator metamaterial for liquid sensing applications

Reconfigurable optical logic in silicon platform

In this paper, we present a novel, scalable, and reconfigurable optical switch that performs multiple computational logic functions simultaneously. The free-carrier depletion effect is used to perform non-volatile switching operations due to its high speed and low power consumption. We adopt the concept of optical memory using a phase-change material to realize the non-volatile reconfigurability without a constant power supply, in addition to providing a large operating bandwidth required for reconfigurability. The proposed reconfigurable optical logic architecture is realized in a compact microdisk resonator configuration, utilizing both the carrier-depletion-based modulation and phase-change optical memory. This is the first time these two modulation schemes are implemented in the same optical microdisk for the purpose of reconfigurable optical logic.

Control and readout of a transmon using a compact superconducting resonator

We demonstrate control and readout of a superconducting artificial atom based on a transmon qubit using a compact lumped-element resonator. The resonator consists of a parallel-plate capacitor with a wire geometric inductor. The footprint of the resonators is about 200 × 200 μm2, which is similar to the standard transmon size and one or two orders of magnitude more compact in the occupied area compared to coplanar waveguide resonators. We observe coherent Rabi oscillations and obtain time-domain properties of the transmon. The work opens a door to miniaturize essential components of superconducting circuits and to further scale up quantum systems with superconducting transmons.