Compact Erbium-doped Fiber Laser Research Articles

MOFs-derived hierarchical NiO-Co3O4 for versatile pulses generation

Polyhedral NiO-Co3O4 materials, as a novel type of metal organic frameworks (MOFs), are considered to be attractive emerging materials in the fields of optoelectronics, energy storage systems, sensing and catalysis because of their high specific surface area, rich variable metal sites and unique morphology. Ultrafast pulse has become an important research tool in basic research and industrial application fields, including supercontinuum generation, laser material processing, laser surgery, lidar and terahertz generation. The saturable absorber (SA) is a key component that affects the laser parameters and generates ultrafast pulses, so it has caused an upsurge in the research of SA. Although MOFs and their derivatives have attracted the attention of researchers in many fields, few works have been carried out in ultrafast photonics. Here, we use the cobalt-based zeolite imidazole framework (ZIF-67-Co) as a precursor to synthesize NiO-Co3O4 polyhedron by calcination, and utilize it as an effective SA in a compact erbium-doped fiber laser (EDFL). The NiO-Co3O4 SA was measured based on home-made double-arm measurement system, which showed that its modulation depth was 5.6%. It shows that high-quality Q-switched mode-locking (QML) with a repetition rate of 5.2 MHz and a pulse width of 1.41 ps can be obtained when the pump power reaches 251.1 mW. After further improvement of the EDFL, we obtained a stable continuous wave mode-locked (CWML) pulse with a pulse duration of 1.35 ps. This is the first demonstration of a versatile pulse fiber laser based on a NiO-Co3O4 polyhedral SA. This work shows that the novel NiO-Co3O4 polyhedron is expected to serve as a highly potential nonlinear optical element in the fields of ultrafast photonics, light modulators and photodetectors.

Erbium-Doped Fiber Laser With a Microfiber Coupled to Silica Microsphere

A compact erbium-doped fiber laser (EDFL) is demonstrated using a piece of 1.5-m-long erbium-doped fiber (EDF) with a microfiber coupled to a silica microsphere at the output end. A stable laser output is achieved due to the recirculation of amplified spontaneous emission (ASE) light inside the linear cavity and the incorporation of microsphere which serves as both a laser filtering element and a mirror. The laser operates at 1533.5 nm with a peak power of 7.7 dBm and an optical signal-to-noise ratio (OSNR) of around 24.4 dB with 980 nm pumping of 100 mW and a sphere diameter of 137 μm. The operating wavelength can be tuned down from 1533.4 to 1531.24 nm by changing the sphere diameter from 108.3 to 190.0 μm. The highest Q-factor of 12760 is obtained at the smallest sphere diameter of 108.3 μm.

Compact fiber laser at L-band region using Erbium-doped Zirconia fiber

A compact Erbium-doped fiber laser (EDFL) operating in L-band region is demonstrated using a fabricated Erbium-doped Zirconia fiber (EDZF) for the first time. The fiber is fabricated by combining Zr and Al to achieve the maximum Erbium ion concentration of 4320 wt ppm. By using a fiber Bragg grating (FBG) in a ring configuration, the laser operates at 1579.6 nm with a slope efficiency of 13.6% and the threshold pump power of 25.1 mW. The lasing wavelength is obtained at Bragg wavelength with an output power of 13 dBm and a 3 dB spectral width of 0.02 nm using a piece of 2 m long EDZF in conjunction with 120 mW of 1480 nm pump power.