Communication In Wireless Sensor Networks Research Articles

Energy efficient data dissemination in wireless sensor network enabled IoT using domain‐adaptive message passing graph neural network

SummaryIn the past few years, restricted wireless sensor networks (WSNs) enabled the Internet of Things (IoT) have attracted significant attention and expansion to enhance service delivery and resource efficiency. Dissemination is a service offered by WSN that uses radio transmission and over‐the‐air programming for updating the deployed sensor nodes through online. The centralized data dissemination methods are replaced by the distributed approaches because they affect the drawbacks of a single point of failure, no scalability, and insecurity. Therefore, an Energy Efficient Protocol for Data Dissemination in Wireless Sensor network‐enabled IoT using Domain‐Adaptive Message Passing Graph Neural Network (EEP‐WSN‐IoT‐DMPGNN) is proposed in this paper. The nodes are formed as clusters utilizing the Deep Fuzzy Curriculum Clustering (DFCC) technique that rewards nodes belonging to a given cluster. By using the Crayfish Optimization Algorithm (COA), the Cluster Head (CH) selection optimally chose the ideal CH and satisfies the multiple objective functions, such as energy, delay, traffic density, and distance. Afterward, domain‐adaptive Message Passing Graph Neural Network (DMPGNN) based routing protocol is developed, the input given to the routing protocol includes a sink, action history, future node, and maximum‐distance node, which attains enhanced data transfer in the chosen path. The proposed technique attains a lower no. of dead nodes, lower energy consumption, and higher Network Lifetime while analyzed with existing techniques, such as routing technique depending on deep learning for effectual data transmission in 5G WSN communication (DL‐RPDT‐WSN), Reinforcement‐Learning base energy effectual optimized routing protocol in WSN (RL‐EERP‐WSN), and Energy‐efficient intellectual routing method for IoT‐enabled WSN (EIR‐IoT‐WSN), respectively.

Enhancing security in wireless sensor networks: A fusion of deep learning and energy-efficient routing

The development of tiny sensing nodes efficient for wireless communication in Wireless Sensor Networks (WSNs) can be attributed to the rapid advancements in processors and radio technology. Data transmission occurs through multi-hop routing in WSN, which relies on nodes’ cooperation. The collaboration between nodes has rendered these networks susceptible to various attacks. It is imperative to employ a security scheme to evaluate the dependability of nodes in distinctive malicious nodes from non-malicious nodes. In recent years, there has been a growing significance placed on security-based routing protocols with energy constraints as valuable mechanisms for enhancing the security and performance of WSNs. A novel solution called the Deep Learning-based Hybrid Energy Efficient and Security System (DL-HE2S2) is introduced to address these challenges. The research workflow encompasses various essential stages, namely the deployment of nodes, the creation of clusters, the selection of cluster heads, the detection of malevolent nodes within each group, and the determination of optimal paths intra- and inter-clusters employing the routing algorithm for efficient packet transmission. The design of the algorithm is focused on achieving energy efficiency and enhancing network security while also taking into account various performance metrics, including a mean network lifetime of 187.244 hours, a throughput of 59.88 kilobits per second, an end-to-end latency of 11.939 milliseconds, a packet loss of 14.9%, a packet delivery ratio of 99.194%, network security at 92.026%, and energy usage of 19.424 J. This research examines the algorithm’s scalability and efficiency across various network sizes using a Network Simulator (NS-2). DL-HE2S2 offers valuable insights that can be applied to practical implementations in multiple applications.

Intelligent multi-agent model for energy-efficient communication in wireless sensor networks

The research addresses energy consumption, latency, and network reliability challenges in wireless sensor network communication, especially in military security applications. A multi-agent context-aware model employing the belief-desire-intention (BDI) reasoning mechanism is proposed. This model utilizes a semantic knowledge-based intelligent reasoning network to monitor suspicious activities within a prohibited zone, generating alerts. Additionally, a BDI intelligent multi-level data transmission routing algorithm is proposed to optimize energy consumption constraints and enhance energy-awareness among nodes. The energy optimization analysis involves the Energy Percent Dataset, showcasing the efficiency of four wireless sensor network techniques (E-FEERP, GTEB, HHO-UCRA, EEIMWSN) in maintaining high energy levels. E-FEERP consistently exhibits superior energy efficiency (93 to 98%), emphasizing its effectiveness. The Energy Consumption Dataset provides insights into the joule measurements of energy consumption for each technique, highlighting their diverse energy efficiency characteristics. Latency measurements are presented for four techniques within a fixed transmission range of 5000 m. E-FEERP demonstrates latency ranging from 3.0 to 4.0 s, while multi-hop latency values range from 2.7 to 2.9 s. These values provide valuable insights into the performance characteristics of each technique under specified conditions. The Packet Delivery Ratio (PDR) dataset reveals the consistent performance of the techniques in maintaining successful packet delivery within the specified transmission range. E-FEERP achieves PDR values between 89.5 and 92.3%, demonstrating its reliability. The Packet Received Data further illustrates the efficiency of each technique in receiving transmitted packets. Moreover the network lifetime results show E-FEERP consistently improving from 2550 s to round 925. GTEB and HHO-UCRA exhibit fluctuations around 3100 and 3600 s, indicating variable performance. In contrast, EEIMWSN consistently improves from round 1250 to 4500 s.

Energy harvesting‐enabled energy‐efficient routing using spotted hyena optimization in wireless sensor network

SummaryWith the continuous proliferation of sensing technology, it has become possible to utilize energy harvesting (EH)‐enabled sensor nodes for a variety of applications. However, conventional wireless sensor networks (WSNs), that is, those without EH‐enabled nodes, still have limited applicability due to their limited battery resources. Further, the utilization of EH‐enabled nodes in the network not only imposes a financial burden on the user but also limits its performance due to its dependence on environmental conditions. To address this concern, in this paper, we propose the EH‐enabled energy‐efficient routing (EHEER) technique for green communication in WSN. The predominant concern being addressed in this paper is the selection of cluster head (CH), which helps in gathering, aggregating and forwarding the data from the cluster‐based routing paradigm. We use the spotted hyena optimizer (SHO) algorithm for optimizing the fitness parameters for CH selection, namely, energy ratio, distance considerations, node density, load balancing and the network's average energy. We use EH‐enabled nodes in the network strategically so as to keep control over the costs incurred in the network. The simulation outcomes empirically prove the efficacy of the proposed work, as it effectively increases the network stability and operational period by a huge margin as compared to the existing techniques.

Efficient key distribution for secure and energy-optimized communication in wireless sensor network using bioinspired algorithms

Wireless Sensor Networks (WSNs) play a major part in numerous applications such as smart agriculture, healthcare, and environmental monitoring. Safeguarding protected communication in this network is dominant. Securing data transmission in WSNs needs a strong key distribution device to defend against malicious attacks as well as illegal access. Traditional techniques like pre-shared or centralized key management are often unreasonable owing to resource limitations, particularly in large-scale sensor systems. To overcome this challenge, a lightweight key distribution technique is employed for safeguarding the security and privacy of data transmission streamlining processes decreasing computational overhead as well as energy consumption. By optimizing and simplifying key distribution devices, we propose to improve the complete efficacy and trustworthiness of WSNs that aid safe communication while preserving valuable energy resources. Therefore, this article designs an Efficient Key Distribution for Secure and Energy-Optimized Communication using Bioinspired Algorithms (EKD-SOCBA) for WSN. The purpose of the EKD-SOCBA technique is to accomplish security and energy efficiency in WSNs. Initially, the EKD-SOCBA technique applies a golden jackal optimization (GJO) based clustering approach to cluster the nodes and select cluster heads (CHs). Also, a lightweight Dynamic Step-wise Tiny Encryption Algorithm (DS-TEA) is applied to secure data transmission in the network. Finally, a lightweight key management phase is employed to protect the encryption key and decrease energy utilization and overhead costs. To exhibit the enhanced act of the EKD-SOCBA model, a comprehensive set of imitations was involved. Extensive results stated enhanced presentation of EKD-SOCBA methodology over other models on WSN.

Artificial Neural Network-Based Mechanism to Detect Security Threats in Wireless Sensor Networks.

Wireless sensor networks (WSNs) are essential in many areas, from healthcare to environmental monitoring. However, WSNs are vulnerable to routing attacks that might jeopardize network performance and data integrity due to their inherent vulnerabilities. This work suggests a unique method for enhancing WSN security through the detection of routing threats using feed-forward artificial neural networks (ANNs). The proposed solution makes use of ANNs' learning capabilities to model the network's dynamic behavior and recognize routing attacks like black-hole, gray-hole, and wormhole attacks. CICIDS2017 is a heterogeneous dataset that was used to train and test the proposed system in order to guarantee its robustness and adaptability. The system's ability to recognize both known and novel attack patterns enhances its efficacy in real-world deployment. Experimental assessments using an NS2 simulator show how well the proposed method works to improve routing protocol security. The proposed system's performance was assessed using a confusion matrix. The simulation and analysis demonstrated how much better the proposed system performs compared to the existing methods for routing attack detection. With an average detection rate of 99.21% and a high accuracy of 99.49%, the proposed system minimizes the rate of false positives. The study advances secure communication in WSNs and provides a reliable means of protecting sensitive data in resource-constrained settings.

Deep Reinforcement Learning-Based Energy Consumption Optimization for Peer-to-Peer (P2P) Communication in Wireless Sensor Networks.

The fast development of the sensors in the wireless sensor networks (WSN) brings a big challenge of low energy consumption requirements, and Peer-to-peer (P2P) communication becomes the important way to break this bottleneck. However, the interference caused by different sensors sharing the spectrum and the power limitations seriously constrains the improvement of WSN. Therefore, in this paper, we proposed a deep reinforcement learning-based energy consumption optimization for P2P communication in WSN. Specifically, P2P sensors (PUs) are considered agents to share the spectrum of authorized sensors (AUs). An authorized sensor has permission to access specific data or systems, while a P2P sensor directly communicates with other sensors without needing a central server. One involves permission, the other is direct communication between sensors. Each agent can control the power and select the resources to avoid interference. Moreover, we use a double deep Q network (DDQN) algorithm to help the agent learn more detailed features of the interference. Simulation results show that the proposed algorithm can obtain a higher performance than the deep Q network scheme and the traditional algorithm, which can effectively lower the energy consumption for P2P communication in WSN.

CNN and Attention-Based Joint Source Channel Coding for Semantic Communications in WSNs

Wireless Sensor Networks (WSNs) have emerged as an efficient solution for numerous real-time applications, attributable to their compactness, cost-effectiveness, and ease of deployment. The rapid advancement of 5G technology and mobile edge computing (MEC) in recent years has catalyzed the transition towards large-scale deployment of WSN devices. However, the resulting data proliferation and the dynamics of communication environments introduce new challenges for WSN communication: (1) ensuring robust communication in adverse environments and (2) effectively alleviating bandwidth pressure from massive data transmission. In response to the aforementioned challenges, this paper proposes a semantic communication solution. Specifically, considering the limited computational and storage resources of WSN devices, we propose a flexible Attention-based Adaptive Coding (AAC) module. This module integrates window and channel attention mechanisms, dynamically adjusts semantic information in response to the current channel state, and facilitates adaptation of a single model across various Signal-to-Noise Ratio (SNR) environments. Furthermore, to validate the effectiveness of this approach, the paper introduces an end-to-end Joint Source Channel Coding (JSCC) scheme for image semantic communication, employing the AAC module. Experimental results demonstrate that the proposed scheme surpasses existing deep JSCC schemes across datasets of varying resolutions; furthermore, they validate the efficacy of the proposed AAC module, which is capable of dynamically adjusting critical information according to the current channel state. This enables the model to be trained over a range of SNRs and obtain better results.

Reliability Evaluation of a Wireless Sensor Network in Terms of Network Delay and Transmission Probability for IoT Applications

Reliability is a crucial performance metric for wireless sensor networks (WSNs) because it ensures network functionality even with degraded sensor nodes and wireless connections. Due to the limited availability of power resources associated with the sensor nodes, their efficacy is reduced. In addition, parameters such as the number of neighbours, packet success rate, packet size, and node capacity have a significant impact on how sensor nodes function. Similarly, inter-node distance and signal-to-noise ratio (SNR) have the greatest influence on the functioning of wireless communications in WSNs. Before evaluating the reliability of a WSN, therefore, the node and link reliability must be computed. This paper evaluates the reliability of sensor nodes by taking into account all of the parameters previously mentioned. In addition, the lifetime of each sensor node is estimated in terms of the fractional energy consumed for each wake-up operation and the transmission of packets, respectively. Using the inter-node distance and SNR values, each wireless link’s reliability is determined. Following this, a proposed algorithm evaluates the reliability of WSN by first enumerating all minimal paths between the sensor node and the base station and then converting these minimal paths into their sum-of-disjoint-product terms. Making use of a suitable example network, every step of the proposed method is illustrated. For evaluating the reliability of WSN, the proposed method is simulated in different environments. In addition, the influence of parameters such as inter-node distance, SNR, number of neighbours, packet success ratio, and time on the reliability values of WSN is portrayed and analysed.

An efficient reconfigurable geographic routing congestion control algorithm for wireless sensor networks

<span lang="EN-US">In recent times, huge data is transferred from source to destination through multi path in wireless sensor networks (WSNs). Due to this more congestion occurs in the communication path. Hence, original data will be lost and delay problems arise at receiver end. The above-mentioned drawbacks can be overcome by the proposed efficient reconfigurable geographic routing congestion control (RgRCC) algorithm for wireless sensor networks. the proposed algorithm efficiently finds the node’s congestion status with the help queue length’s threshold level along with its change rate. Apart from this, the proposed algorithm re-routes the communication path to avoid congestion and enhances the strength of scalability of data communication in WSNs. The proposed algorithm frequently updates the distance between the nodes and by-pass routing holes, common for geographical routing. when the nodes are at the edge of the hole, it will create congestion between the nodes in WSNs. Apart from this, more nodes sink due to congestion. it can be reduced with the help of the proposed RgRCC algorithm. As per the simulation analysis, the proposed work indicates improved performance in comparison to conventional algorithm. By effectively identifying the data congestion in WSNs with high scalability rate as compared to conventional methods</span>

Enhanced Authentication Scheme for Mobility Model in Medical Wireless Sensor Networks

The advent of wireless sensor networks has brought significant advancements in healthcare, enabling remote interactions between medical professionals and patients. However, ensuring the security of communication in Medical Wireless Sensor Networks (WSNs) poses different challenges. To address this, this paper introduces a novel authentication framework designed for doctors and patients. The proposed mechanism incorporates essential features such as mutual authentication, anonymity, and data integrity, safeguarding the Medical Wireless Sensor Networks (MWSN). Symmetric encryption techniques are employed to maintain the overall security of the system.

AQND: An asymmetric quorum-based neighbor discovery protocol for reducing delay in sensor based systems

Neighbor discovery is basic for Wireless Sensor Networks (WSNs) communication, which is the key to network performance. Since sensor nodes were powered by battery, sleep/active rotation was widely adopted to save energy, which led to the neighbor discovery problem. Many timely neighbor discovery protocols are proposed for wake-up scheduling to expedite the discovery and data routing while saving energy. In this paper, an asymmetric quorum-based neighbor discovery (AQND) protocol is proposed to reduce the delay of neighbor discovery and data routing while improving the energy utilization and maintaining a high lifetime. According to our theoretical analysis, the proposed AQND protocol outperforms previous strategies in main performance indicators such as reducing the average relative error of duty cycle, the maximum neighbor discovery delay and the end-to-end discovery delay while improving the energy utilization ratio. In addition, using the proposed AQND protocol to improve the above network performances doesn’t reduce lifetime. Maintaining the end-to-end delay consistent with the previous strategies, the lifetime of network can be improved.

DAR Model: A Novel Symmetric Key Enabled Security architecture for reliable data transfer in Wireless Sensor Networks

Security is an indispensable aspect in every transaction happening in the network transmissions. Wireless Sensor Networks are pretty vulnerable to the security attacks. Hence a highly efficient architectural model is very much essential in designing the sensor networks. Cryptographic algorithms play a vital role in providing encryption and decryption to the data being transmitted consequently with which security is offered in an elegant manner. In this paper, a reliable design comprising three pioneering algorithms enabled with symmetric key is architected for secure communication in wireless sensor networks from a node to the base station. The design involves two phases. In the former phase two algorithms which are effective in all perspectives are used for data transmission from node to cluster head and in the latter phase another proficient algorithm is used for communication between cluster head to base station. The three algorithms used are Data Encryption Standard (DES), Advanced Encryption Standard (AES) and RC4. Both block and stream cipher algorithms are used to fine tune the performance; and in addition, the data has been compressed with unprecedented techniques to reduce the burden on encryption. This led to an amazing performance in terms of security parameters.

FuzDeMa: A portable fuzzy-based decision-making tool for reliable communication in wireless underground sensor networks

The deployment and the exploitation of a Wireless Underground Sensor Network (WUSN) remain challenging because of signal attenuation in the soil and the limited battery that powers the sensor nodes. Due to the attenuation of the signal in the ground, the reception or loss of the sent data depends on the ground conditions, which can change dynamically. However, in existing WUSNs, each node sends the data collected in each round regardless of the signal attenuation. It is well demonstrated that sensor nodes consume the most energy during transmission. Obviously, transmission without receiving any data significantly reduces the lifetime of a sensor node useless. This paper presents a novel fuzzy-based decision-making solution called FuzDeMa that reduces energy consumption by anticipating data losses before transmission. To do so, FuzDeMa assesses in real time the loss or the reception of a packet according to the in-situ node's environments before its transmission and decides whether to send or not the packet based on the computed reliability. To validate the proposed approach, we embed it into a dedicated underground node called the MoleNet and realized real experimentations firstly with an existing dataset and secondly, with precision-measuring equipment to estimate the energy consumption. The results revealed the possibility of prolonging the lifetime of the sensor node by saving up to 81.7876 microjoules in a single round. Additionally, FuzDeMa shows the ability to save energy for up to 46 of additional revolutions, thus extending the life of the sensor node to 32.85% for 140 real transmission cycles. An analytical generalization of FuzDeMa is provided regardless of a specific dataset or sensor node. Thus, we provided the conditions for a random dataset to save the energy with any sensor node that implements FuzDeMa during transmissions.

Optical Communication and Positioning Convergence for Flexible Underwater Wireless Sensor Network

This paper presents a novel scheme based on underwater optical wireless communication and positioning (UOWC-UOWP) for an underwater wireless sensor network (UWSN). A dual-hop system is adopted to extend the limited coverage area of the UWSN with mobile nodes, consisting of a grade-index plastic optical fiber (GI-POF) link and a wireless link. Specifically, the mini-LED offers high-speed and flexible uplink transmission and the high-power LED enables both downlink transmission and positioning. The time frame design and code division multiplexing access (CDMA) support multi-user signal transmission. Proof-of-concept experiments with GI-POF and wireless link demonstrate the feasibility of the proposed scheme, which offers full-duplex communication, high-precise positioning and extended distance. To the best of our knowledge, the UOWC-UOWP convergent system is proposed for the first time. It has great potential to support high-capacity transmission between mobile nodes for future underwater transmission scenarios.

An Overview and Comparison of Wireless Technologies and Standards for Industrial Wireless Sensor Networks

The tremendous research and development has provided a number of wireless technologies and standards used for communication in Industrial Wireless Sensor Networks. The primary reason for writing this article is to study all available Wireless technologies and standards and to identify their area of usage, study different parameters like power consumption, functionality, communication range, transmission speed, data type etc. Another important and main reason of this article is to select best suitable technology for our next research. Various parameters of established technologies like Wireless HART, Zigbee, ISA 100.11a and Dash7 have been compared using a comparison table.

An intelligent routing algorithm for energy prediction of 6G-powered wireless sensor networks

With the rapid development of the Internet and computers, large-scale network applications have become a research hotspot in the communication industry, engineering and other fields. Building a new wireless sensor network and intelligent communication transmission system can promote the further upgrading and improvement of the capability industry, which is also a subject that the current network academia and communication academia are trying to explore. Based on the above background environment, this paper proposes the research on energy prediction and intelligent routing algorithm of wireless sensor networks in the development of sixth generation (6G) networks. A node coverage and scheduling algorithm based on energy prediction is proposed for the overlap and non-uniformity of regions in network transmission. Secondly, the problem of energy efficient utilization in wireless sensor networks is solved, and the clustering algorithm is used to predict the use process. The working state model of network sensor is established, and the energy parameters are added to the actual prediction calculation as influencing factors. Finally, in the intelligent routing mechanism, clustering mechanism and particle swarm optimization algorithm are used to improve the path selection, so as to improve the fault tolerance of wireless network transmission in the face of large amounts of dynamic data. The research results show that the optimization and intelligent routing algorithm based on energy prediction for wireless sensor networks can prolong the service life cycle and ensure the network transmission efficiency and coverage in a long work cycle. It can ensure the energy supply of the sensor and prolong the service time through the balanced node scheduling.

Energy-Aware Reliable Medium Access Control Protocol for Energy-Efficient and Reliable Data Communication in Wireless Sensor Networks

Energy-Aware Reliable Medium Access Control Protocol for Energy-Efficient and Reliable Data Communication in Wireless Sensor Networks

Lightweight key distribution for secured and energy efficient communication in wireless sensor network: An optimization assisted model

Lightweight key distribution for secured and energy efficient communication in wireless sensor network: An optimization assisted model

A multipath routing protocol for secure energy efficient communication in Wireless Sensor Networks

A Wireless Sensor Network (WSN) is comprised of a number of sensor nodes (SNs) that are randomly placed in an open, harsh environment for many applications. Due to the resource-constrained nature of SNs and hostile deployment environments, energy efficiency and security are considered two key factors in designing WSN routing protocols. This paper proposes an Energy Efficient Secure Multipath (EESM) routing protocol to securely construct efficient routes and transmit data packets between SNs and the base station (BS). EESM achieves energy efficiency through minimal task allocation among SNs whereas all computation-intensive tasks such as network information collection, routing table generation, and network maintenance are performed by the BS. The proposed protocol incorporates lightweight security mechanisms including a one-way hash chain, message authentication code, encryption, and clique-based coordinator selection and monitoring schemes to defend against numerous security attacks. Simulation results show that EESM can successfully detect and protect the network against various security attacks such as replay attacks, sybil attacks, sinkhole attacks, spoofing attacks, compromised node attacks, and so on. In terms of energy efficiency, the proposed protocol achieves an up to 37% increase in network lifetime and a 6% increase in throughput over Secure and Energy Efficient Multipath (SEEM) routing, Secure and Reliable Multipath Routing (SRMR), and Reliable and Multipath Encounter Routing (RMER) protocols. The paper implements the protocol in a real environment using Arduino motes to analyze security overheads and network setup time.