Common Polymer Type Research Articles

Advances in the Separation and Removal of Microplastics in Water Treatment Processes

In this review, we comprehensively analyzed the distribution of microplastics （MPs） in major water ecosystems in China and the fate of MPs during the water treatment process. The removal efficiency of MPs with different colors, sizes, shapes, and materials was also discussed. The results showed that the abundance of microplastics in the aquatic environment was geographically variable and closely related to human activities. Fibrous and transparent （white） microplastics were the most common features in China's water ecosystems and water treatment plants, with polypropylene （PP）, polyethylene （PE）, and polystyrene （PS） being the most common polymer types of microplastics. The removal efficiency of MPs varied from different treatment processes significantly. Pre-treatment and primary treatment in wastewater treatment plants （WWTPs） contributed the most to the removal. In the secondary treatment, the sedimentation tank showed more efficiency than the biological treatment processes. Tertiary treatment processes demonstrated remarkable effectiveness in achieving terminal control of MPs, especially membrane technologies. On the contrary, aeration and hydrodynamic effects may have increased the abundance of MPs in WWTPs. In drinking water treatment plants （DWTPs）, coagulation-sedimentation processes were found to be the most effective in removing MPs, followed by filtration and disinfection processes. Further, both pre-treatment and post-treatment steps also made significant contributions to MPs removal.

Microplastics in Freshwater Aquaculture Fishpond System in Yichang, China: The Occurrence, Characteristics and Potential Risks

At present, microplastics have attracted much concern worldwide, but still few researches have focused especially on aquaculture fishponds. In this study, investigations were conducted in Zhijiang (ZJ) and Yidu (YD) areas of Hubei, China, typical freshwater aquaculture bases of the middle and lower reaches of the Yangtze River, on the occurrence and distribution characteristics of microplastics in fishpond system. It was found that microplastics presented in all samples from water, sediment, fish, and fish feed. Most microplastics detected had a diameter of <1.0 mm, blue and black were the most common colors, and fiber shape was the dominant type. The most common polymer types were polyethylene (PE) and polypropylene (PP). Microplastic abundance in fish was correlated with that in sediment and water. The potential ecological risk index values indicated that water, sediment, and fish samples were under moderate pollution risk. The results of this study illustrated the microplastics pollution situation in freshwater cultured fishpond systems, and the findings presented here will serve as a reference for future investigations of the environmental risks of microplastics in aquaculture environment.

Invisible threat to mesopelagic fish: Microplastics and artificial cellulose particles in bigfin lanternfish Symbolophorus californiensis from the Northwest Pacific Ocean

Lanternfishes play an important role in connecting epipelagic and mesopelagic ecosystems. Due to their global distribution, diel vertical migration, and low trophic position, they may be highly susceptible to the ingestion of microplastics (MPs) and artificial cellulose particles (ACs). However, the role of lanternfishes in these emergent pollution research remains underestimated. In this study, we compared the abundance and characteristics of MPs and ACs in the stomach and intestine of bigfin lanternfish (Symbolophorus californiensis) from the Northwest Pacific Ocean. The results showed no difference in the abundance and size of MPs between the stomach (0.28 ± 0.63 items/individual, 103.72–2946.58 μm) and intestine (0.32 ± 0.56 items/individual, 122.03–4398.17 μm). The majority of MPs were fibrous in shape, with blue and transparent being the predominant colors. Polyester (28.2 %) and polyethylene terephthalate (20.5 %) were the most common polymer types. ACs were also primary in the shape of fiber (93.2 %), with transparent being the predominant color. The abundance of ACs in the intestine (0.49 ± 0.83 items/individual) was significantly higher than that in the stomach (0.18 ± 0.43 items/individual), while similar particle sizes were observed. This study provides an important baseline on lanternfishes contamination by MPs and ACs. Understanding this impact of mesopelagic fish is crucial for enhancing our comprehension of the vertical transfer mechanism of these pollutants between epipelagic and mesopelagic ecosystems.

Detection of fibrous microplastics and natural microfibers in fish species (Engraulis encrasicolus, Mullus barbatus and Merluccius merluccius) for human consumption from the Tyrrhenian sea

The occurrence of natural/artificial and synthetic microfibers was assessed in three commercial fish species (Engraulis encrasicolus, Mullus barbatus, Merluccius merluccius) from the Tyrrhenian Sea sold for human consumption. The gastrointestinal tracts of n. 150 samples were analyzed, the isolated microfibers were classified applying a morphological approach, based on the analysis of their morphological features, coupled with the identification of the chemical composition of a subsample of microfibers. All the species contained microfibers at levels ranging from 0 to 49 items/individual and the number of ingested microfibers significantly differed between pelagic and demersal fishes. The evaluation of fiber morphologies highlighted that natural/artificial microfibers were the most numerous among the isolated microfibers, while the dominant colors were blue, black, and clear in all the species. Chemical characterization confirmed the morphological identification and indicated cellulose and polyester as the most common polymer types. Considering the analytical issues that may affect the evaluation of microfiber pollution, the results pointed out the importance of an accurate morphological approach that allows the distinction between different fiber types, before the spectroscopic analyses. Moreover, the implementation of fast and accessible methods to identify microfibers in fish species intended for human consumption will be beneficial also to make an adequate risk assessment to consumer health.

The accumulation of microplastics in fish freshwater in the Mun river, Thailand

Background: Microplastic pollution mainly occurs from terrestrial sources, but research on plastic contamination in aquatic environments is limited. Freshwater fish are widely consumed throughout Southeast Asia. Microplastic contamination is becoming an important issue that leads to human health risks from consumption. Objectives: The study aimed to determine the accumulation of microplastics ingested by fish in freshwater in the Mun River. Methods: Freshwater fishes in the Mun River caught by local fishermen and the most dominant species consumed in the Mun River include Paralaubuca typus, Phalacronotus bleekeri, and Morulius chrysophekaion. Twenty-four samples from each species were collected. Microplastics in these species were analysed for abundance, size, shape, color, and type of polymer. Results: The results showed that the average amounts of microplastic contamination in the gastrointestinal tracts (GIT) and gills of Morulius chrysophekadion were 17.70±8.20 pieces/fish, Phalacronotus bleekeri were 11.83±8.74 pieces/fish, and Paralaubuca typus were 10.25±7.56 pieces/fish, respectively. The average number of microplastics found in the urban area was 26.50±4.21 pieces/fish; in the agricultural area, it was 9.77±4.10 pieces/fish; in the confluence of the Mun and Chi River areas, it was 9.50±3.51 pieces/fish; and the natural area had 7.27±4.15 pieces/fish, respectively. The average size of microplastics found in fish was 878.29±904.41μm. The most common polymer type microplastic was polyethylene (PE) where the most common shape was Fiber-shaped, and the most common colour was blue. Conclusion: The study findings indicate a prevalent form of microplastic accumulation in three fish species especially among Morulius chrysophekaion. And findings show that every fish species in the urban area have the most contamination. As a result, fish GIT and gills should be removed before consumption to reduce exposure to microplastics instead of consuming them.

Beneath the surface: Exploring microplastic intricacies in Anadara granosa

Anadara granosa or blood cockles have been reported to be a candidate for biomonitoring agents due to their sedimentary nature and their nutrient uptake mechanisms. Yet, this bivalve is still regarded as a delicacy in Asian cuisine. Malaysia is the largest exporter of this sea product that contaminated cockles may also be experienced by the importing countries. However, the bioaccumulation of microplastics in A. granosa cultivated in Malaysia has not been extensively studied. It is crucial to comprehend the risk posed to humans by consuming A. granosa in their diet. Therefore, the purpose of this research is to investigate the levels of microplastic accumulation in A. granosa from major exporters in Peninsular Malaysia, to evaluate the associated risk of microplastics on the species, and to estimate daily human consumption of microplastics through the consumption of A. granosa. The abundance of microplastics was quantified through the use of a stereo microscope, and the polymer type was determined using FTIR and micro-FTIR. Findings from this investigation revealed that all samples of A. granosa were contaminated with microplastics, with the highest levels of accumulation found in bivalves collected from the west coast (0.26 ± 0.15 particles/g) of Peninsular Malaysia. Fragment and fiber microplastics, measuring between 0.05 and 0.1 mm in size, were found to be the most prevalent in A. granosa, with blue being the dominant identified colour and rayon being the most common polymer type. Microplastic risk assessment due to the presence of polyacrylate, polycarbonate (PC), and polymethyl methacrylate (PMMA) resulted in a high risk of contamination for A. granosa. It was further determined that the current estimated dietary intake (EDI) suggests that consumers of A. granosa uptake approximately 21.8–93.5 particles/person/year of microplastics. This study highlights that A. granosa accumulates microplastics, which could potentially result in bioaccumulation and biomagnification in humans through consumption.

Microplastics in Arctic waters of the Finnish Sámi area

We explored the presence of microplastics in the Finnish Arctic Sámi home area. A dialogue between Indigenous knowledge and scientific field work produced data about microplastics in remote wilderness aquatic ecosystems. Methods included geographical Indigenous knowledge analysis, water sampling with fraction filtration, and imaging Fourier transform infrared spectroscopy. The MPs found were small; the mean particle size was 126 ± 121 μm. Particle concentrations of MPs in freshwater and marine samples varied between 45 and 423 MPs m−3 and the most common polymer types were polyethylene, polypropylene, and polyethylene terephthalate. In conclusion, because microplastics are present even in the wilderness areas, their abundance should be monitored to assess plastic pollution in the relatively pristine Arctic environments. Sámi Indigenous knowledge proved to be a beneficial and important initiator, because locals recognize the possible sources and transport pathways of plastic litter, and practical sampling sites in the complex freshwater systems of the area.

Microplastics footprint in nature reserves-a case study on the microplastics in the guano from Yancheng Wetland Rare Birds National Nature Reserve, China

Bio-ingestion of microplastics poses a global threat to ecosystems, yet studies within nature reserves, crucial habitats for birds, remain scarce despite the well-documented ingestion of microplastics by avian species. Located in Jiangsu Province, China, the Yancheng Wetland Rare Birds Nature Reserve is home to diverse bird species, including many rare ones. This study aimed to assess the abundance and characteristics of microplastics in common bird species within the reserve, investigate microplastic enrichment across different species, and establish links between birds' habitat types and microplastic ingestion. Microplastics were extracted from the feces of 110 birds, with 84 particles identified from 37.27% of samples. Among 8 species studied, the average microplastic abundance ranged from 0.97 ± 0.47 to 43.43 ± 61.98 items per gram of feces, or 1.5 ± 0.87 to 3.4 ± 1.50 items per individual. The Swan goose (Anser cygnoides) exhibited the highest microplastic abundance per gram of feces, while the black-billed gull (Larus saundersi) had the highest abundance per individual. The predominant form of ingested microplastics among birds in the reserve was fibers, with polyethylene being the most common polymer type. Significant variations in plastic exposure were observed among species and between aquatic and terrestrial birds. This study represents the first quantitative assessment of microplastic concentrations in birds within the reserve, filling a crucial gap in research and providing insights for assessing microplastic pollution and guiding bird conservation efforts in aquatic and terrestrial environments.

Microplastic contamination in water, sediment, and fish from the Kahayan River, Indonesia

ABSTRACT Microplastic occurrence in the aquatic ecosystem has become of great concern worldwide because of its persistence, durability, and toxicity. Microplastics are found ubiquitous in freshwater environments, including rivers. Thus, our study assesses microplastic pollution in water, sediment, and fish of the Kahayan River, Indonesia. We first evaluated microplastics’ occurrence, abundance, and characteristics in Central Kalimantan, Indonesia. The average abundance of microplastic in water was 2.92 ± 2.62 items/L, while in sediment was 6.93 ± 3.15 items/Kg dry weight. We found 53 out of 90 fish (58.89%) had microplastics in their digestive tracts with an average abundance of 2.03 ± 3.416 items/Ind. The predominant characteristics in water were fragment and fibre and size of 150-<300 µm. Microplastics present in the sediment and the digestive tract of fish have similar dominant fibre. In terms of size, sediments and fish were dominated by 150-<300 µm, 1000–5000 µm, and 500-<1000 µm respectively with different order of proportions. The infrared spectroscopic analysis confirmed the most common polymer type to be polyvinyl chloride in water and sediment, while polyethylene was predominant in fish. Our study provides the current status of microplastic contamination for further evaluation and management of the Kahayan River, Indonesia.

Effects of soil properties and land use patterns on the distribution of microplastics: A case study in southwest China

Microplastic pollution in the soil environment is of great concern. However, the current research on microplastics (MPs) in Southwest China mainly focuses on their distribution characteristics and sources in soil, making the understanding of the soil properties and land use patterns influencing soil MPs insufficient. In this study, the abundance and distribution characteristics of MPs in the soil of different land use patterns in Guizhou Province were determined. The results revealed that the average abundance of MPs in soils was 2936 items/kg, ranging from 780 to 9420 items/kg. The MPs were mainly small particle size (0–0.5 mm), granular, and black, accounting for 87.5%, 36.6%, and 82.2%, respectively. The most common polymer types of MPs were polypropylene, polyethylene terephthalate, and polyethylene, which accounted for 20.4%, 16.8%, and 16.4%, respectively. As soil bulk density increased, microplastic abundance and small particle size decreased. Soil microplastic abundance slightly decreased with increasing soil porosity. The abundance of MPs increased with the increase in soil pH, but no significant correlation was observed between soil organic matter content and microplastic abundance. pH was the major factor that affected the microplastic distribution, which accounted for 32.5%. This study provides insight into the distribution and influencing factors of soil MPs and also provides a theoretical basis for subsequent research on soil microplastic pollution.

Microplastics contamination in bivalves off the island in the strait of malacca and its potential health risks

The widespread presence of microplastics in the ocean is a significant threat to marine life and humans. A study was conducted to investigate the extent of microplastic contamination in the coastal waters of Langkawi and Penang, situated on the northern coast of Peninsular Malaysia. Rock oysters (Saccostrea cucullata) were utilized as bioindicators due to its availability in all sampling sites to evaluate microplastics,by considering its abundance, types, polymer composition, and potential health risks related to consumption. Soft tissues were digested with 10% KOH, and the resulting microplastics were examined using a stereo microscope and microplastics polymer were identified through ATR-FTIR. Kok Beach and Penarak Beach exhibited notably higher microplastic abundance, mainly in the form of filaments with predominant black and red colours. The most common polymer types were cellulose triacetate (CTA) and polycyclohexanedimethylene terephthalate (PCT). Hazard Quotient values, indicating potential health risks from consuming S. cucullata, surpassed a critical threshold at all locations. The study's findings suggest that it serves as a fundamental reference for future research on microplastic contamination in the islands along the northern coast of Peninsular Malaysia.

Highly selective solid-liquid extraction of microplastic mixtures as a pre-preparation tool for quantitative nuclear magnetic resonance spectroscopy studies.

Despite various developments in the application of quantitative nuclear magnetic resonance (qNMR) spectroscopy toward microplastics in recent years, this method still lacks suitable sample preparation and fractionation procedures. As this poses a crucial obstacle for its utilisation on environmental samples, which contain various mixtures of polymers along with other matrix substances, this research aims to address this missing link by presenting an easy-to-apply procedure based on common laboratory equipment. The process selectively separates microplastics from inorganic constituents while performing the necessary fractionation of different types of microplastics prior to qNMR analysis. It allows subsequent quantification of polystyrene (PS), polybutadiene rubber (BR), polymethylmethacrylate (PMMA), polyvinylchloride (PVC), polyethylene terephthalate (PET) and polyamide (PA) from a single sample, establishing recovery rates greater than 88% for all tested polymer types. Additionally, we extended our previous qNMR protocol to include two common polymer types: polymethylmethacrylate (PMMA) and polyacrylonitrile (PAN), achieving limits of detection down to 1.76 μg ml-1 and 12.53 μg ml-1 as well as limits of quantification down to 5.88 μg ml-1 and 41.78 μg ml-1, respectively. Thus, the qNMR method presented herein is now applicable to eight abundant polymer types, allowing the quantification of up to three different types simultaneously.

Distribution of microplastic contamination in the major tributaries of the Yellow River on the Loess Plateau

Microplastic pollution in rivers had gained increased attention worldwide. However, the differences in microplastic characteristics among major tributaries of large rivers and the environmental factors influencing these characteristics remain uncertain. Through field investigation and indoor experiments, the distribution of microplastics and their driving factors were investigated at 96 sampling sites along the three main tributaries (Huangfuchuan, Wuding and Yan River) of the Yellow River in the Loess Plateau. The results revealed that the average microplastic abundance followed this order: Yan River (430.30 items kg−1) > Wuding River (145.09 items kg−1) > Huangfuchuan River (253.33 items kg−1). The abundance was lower than that in most parts of the world. There was a generally increasing trend in average microplastic abundance from upstream to downstream in the three rivers. The most frequently observed microplastic colors observed were black and white, and the most common polymer type were PE and PS in all three rivers. The dominant shape and size in the three rivers were fiber and particles measuring 0.5–5.0 mm, all accounting for more than half of the total microplastic content. The microplastic abundance, shape, and size were primarily influenced by mean annual precipitation and population density. This relationship can be attributed to the fact that increased population density driven by higher demand and consumption of plastic products, while augmented rainfall aggravated the occurrence of floods and provided conditions for plastic degradation and accumulation. This study will provide fundamental data for pollution assessing and ecological protection of the Yellow River, and provide a certain reference for future management and protection on the Loess Plateau.

Microplastics in Freshwater Ecosystems of India: Current Trends and Future Perspectives.

Microplastics (MPs)-i.e., plastic particles less than 5 mm in length-are becoming a growing environmental concern due to their potential ecotoxicological impacts on aquatic ecosystems. In India, MPs contamination is a significantly growing problem due to increased plastic production as well as its low rate of recycling. As a result, MPs research work in India has gained considerable attention in the last two decades. The objective of this study is to conduct a comprehensive review of the existing scientific literature on MPs in freshwater ecosystems (e.g., lakes and rivers) of India. A bibliographical search was used to conduct the literature review across a number of databases including ScienceDirect, Google Scholar, and ResearchGate. We found that in comparison to the marine ecosystem the source, transport, and fate of MPs in freshwater ecosystems of India are still underexplored, and we found only 18 relevant papers. This review work reveals that there is no standard procedure for separating MPs from water and sediment samples, and as a result, comparing the results was a challenging task. The larger MPs (>500 μm) in water and sediments were identified most commonly using the attenuated total reflection (ATR) Fourier Transform Infrared (FTIR) spectroscopy technique (ATR-FTIR), whereas smaller-sized MPs (<500 μm) were identified using FTIR fitted with a confocal microscope, also known as μ-FTIR imaging or chemical imaging. We found that white-colored fibers and fragments of polypropylene (PP), polyethylene terephthalate (PET), and polyethylene (PE) were the most common polymer types in the freshwater ecosystems of India. Although research on MPs in freshwater ecosystems of India has gained momentum over the past decade, the literature review reveals a limited understanding of the impact of MPs' weathering patterns, the role of biofouling, and the role of water hyacinths on freshwater ecosystem services in India. Furthermore, the fluxes of MPs to the Indian oceans are not constrained, and atmospheric transport in high-altitude mountains, which have already been made fragile by climate change, has not been fully investigated. This study, therefore, calls for additional assessments of MPs in freshwater ecosystems-particularly in the central parts of India.

Microplastics and phthalate esters release from teabags into tea drink: occurrence, human exposure, and health risks.

Tea, the most common infusion worldwide, is usually sold in teabags due to the ease of usage. The increase in the use of plastic materials in the food packaging industry has led to an increase in released contaminants, such as microplastics (MPs) and phthalates (PAEs), in various food products including teabags. In this research, the abundance and features of MPs as well as PAEs concentration were investigated in 45 teabag samples of different Persian and German brands. The abundance of MPs in the Persian and German teabag samples was averagely 412.32 and 147.28 items/single teabag, respectively. Also, average PAEs levels in the Persian and German teabag samples were 2.87 and 2.37 mg/g, respectively. The predominant size category of MPs was related to 100-250 μm. Fibers and transparent were the dominant shape and color of detected MPs in teabags, respectively. Polyethylene (PE) and nylon were the most common MP polymer types. The most prominent PAEs congeners in teabag samples were diethylhexyl phthalate (DEHP) and diisobutyl phthalate (DiBP). Furthermore, MP exposure hazard through tea ingestion was analyzed for children and adults. DEHP showed the cancer risk (CR) for children and adults. The findings of this research indicated that high MPs and PAEs levels are released from teabags into tea drinks. Considering a daily drinking of a volume of 150 and 250 mL tea by children and adults, 486 and 810 MPs may enter their bodies, respectively. Thus, tea prepared with teabag-packed herbs may pose a significant health risk for consumers.

Using citizen science to understand floating plastic debris distribution and abundance: A case study from the North Cornish coast (United Kingdom)

Citizen science is now commonly employed to collect data on plastic pollution and is recognised as a valuable tool for furthering our understanding of the issue. Few studies, however, use citizen science to gather information on water-borne plastic debris. Here, citizen scientists adopted a globally standardised methodology to sample the sea-surface for small (1-5 mm) floating plastic debris off the Cornish coast (UK). Twenty-eight trawls were conducted along five routes, intersecting two Marine Protected Areas. Of the 509 putative plastic items, fragments were most common (64 %), then line (19 %), foam (7 %), film (6 %), and pellets (4 %). Fourier-transform infrared spectroscopy identified the most common polymer type as polyethylene (31 %), then nylon (12 %), polypropylene (8 %), polyamide (5 %) and polystyrene (3 %). This study provides the first globally comparative baseline of floating plastic debris for the region (mean: 8512 items km−2), whilst contributing to an international dataset aimed at understanding plastic abundance and distribution worldwide.

Microplastic Pollution and Its Potential Correlation with Environmental Factors in Daya Bay, South China Sea

Microplastics (MPs) have been given considerable attention due to their risk to aquatic organisms in marine environments. In this study, MPs’ abundance and their potential correlation with environmental factors were investigated from 26 sites in Daya Bay, South China Sea. The results showed that the abundance of MPs was 1.8–13.87 items/L in surface water and 190–823 items/kg (dry weight) in sediment. The most abundant shape of MPs in both water and sediment was fiber, the most abundant particle size was 0.5–1 mm and the most abundant color was transparent. In addition, the most common polymer type of MPs was polyethylene terephthalate (PET), followed by rayon (RY), polypropylene (PP), cellulose (CL) and polyethylene (PE). The abundance of MPs in sediment was significantly correlated with sediment organic N and C (p &lt; 0.05), while that in surface water had no significant correlation with the environmental factors except dissolved oxygen (p &gt; 0.05). A factor analysis showed that MPs in sediment might share similar sources with organic N and C, which were mainly from the autochthonous sedimentation of marine organisms, and MPs might sediment jointly with organic matter. In summary, this study reflects on MP pollution and the potential correlation with environmental factors, providing essential data for governmental agencies to formulate microplastic pollution control policies.

Mono-material product design with bio-based, circular, and biodegradable polymers

Mono-material product design with bio-based, circular, and biodegradable polymers

Quantification and characterization of microplastics in surface water samples from the Northeast Atlantic Ocean using laser direct infrared imaging

15 filtration samples were collected at eight locations onboard the RV Sonne (cruise SO279 in 2020) from 6 m water depth using a fractionated stainless-steel filtration unit. The size fraction > 300 μm was visually examined and potential microplastic particles were analyzed by ATR-FTIR spectroscopy. The treatment of size class 20 μm < d < 300 μm was based on enzymatic-oxidative microwave-assisted “one-pot” matrix digestion in conjunction with analysis of the microplastics by time-efficient LDIR imaging.Total number concentrations ranged from 47 to 2154 microplastic particles per m3 (average for all stations: 500 ± 700 microplastic particles m−3 (1 SD; n = 8)). In total, 20 polymer types were identified. The most common polymer types were polyethylene terephthalate (20 %) and acrylates/polyurethane/varnish (15 %). 93 % of the detected microplastics were smaller than 100 μm in length. Analysis of sample replicates indicates high spatio-temporal variations in microplastic pollution within the investigated region.

Microplastic Accumulation in Catfish and Its Effects on Fish Eggs from Songkhla Lagoon, Thailand

Microplastics have been found to accumulate in freshwater, marine ecosystems, and biological organisms. The frequency of studies on microplastic contamination in organs has increased recently, although there have been relatively fewer investigations on fish eggs in Thailand. To extract microplastics from catfish samples for laboratory analysis (Osteogeneiosus militaris), we used 10% potassium hydroxide in the digestion process. A needle penetrated the fish eggs to investigate microplastic contamination. We examined microplastics under a stereomicroscope and used Fourier transform infrared spectroscopy to determine the type of polymer. We found microplastic contamination in organs, most commonly in the stomach (0.91 ± 0.13 items/g), followed by tissue (0.53 ± 0.09 items/g), and gills (0.30 ± 0.03 items/g) at the level of significance p &lt; 0.01. We found a total of 349 fish eggs with 27 items of microplastic. The dominant microplastic we found in the stomach, tissue, and gills of the fish, as well as in fish eggs, was of fiber shape. We noted that fragments were found only in the stomach and tissue of fish. The dominant color of microplastics was black in organs and blue in fish eggs. The common polymer types in organs and fish eggs were polyethylene terephthalate, polypropylene, and cellulosic fiber.