International Commission On Illumination Research Articles

Structure Engineering of Acridine Donor to Optimize Color Purity of Blue Thermally Activated Delayed Fluorescence Emitters.

9,9-Dimethyl-9,10-dihydroacridine (DMAC) is one of the most widely used electron donor for constructing high-performance thermally activated delayed fluorescence (TADF) emitters. However, DMAC-based emitters often suffer from the imperfect color purity, particularly in blue emitters, due to its strong electron-donating capability. To modulate donor strength, 2,7-F-Ph-DMAC and 2,7-CF3-Ph-DMAC were designed by introducing the electron-withdrawing 2-fluorophenyl and 2-(trifluoromethyl)phenyl at the 2,7-positions of DMAC. These donors were used, in combination with 2,4,6-triphenyl-1,3,5-triazine (TRZ) acceptor, to develop novel TADF emitters 2,7-F-Ph-DMAC-TRZ and 2,7-CF3-Ph-DMAC-TRZ. Compared to the F- or CF3-free reference emitter, both two emitters showed hypsochromic effect in fluorescence and comparable photoluminescence quantum yields without sacrificing the reverse intersystem crossing rate constants. In particular, 2,7-CF3-Ph-DMAC-TRZ based OLED exhibited a blue shift by up to 39 nm and significantly improved Commission International de l'Éclairage (CIE) coordinates from (0.36, 0.55) to (0.22, 0.41), while the external quantum efficiency kept stable at about 22.5%. This donor engineering strategy should be valid for improving the color purity of large amount of acridine based TADF emitters. It can be predicted that pure blue TADF emitters should be feasible if these F- or CF3-modifed acridine donors are combined with other weaker electron acceptors.

1,1,1-Trifluoro-5,5-dimethyl-2,4-hexanedione based Ternary Complexes of Eu(III): Synthesis, Structural and Luminescence Investigations

In this current study, we have synthesized four europium(III) complexes utilizing a tri-fluorinated β-diketone moiety: 1,1,1-trifluoro-5,5-dimethyl-2,4-hexanedione (TFDH) with auxiliary ligand: 2,2'- bipyridine and its derivatives. FTIR, UV-Vis and luminescence spectroscopic characterizations were implemented for evaluation of the bonding and luminous characteristics in synthesized europium(III) complexes. Eight-coordination environment around Eu3+ ion has been demonstrated by 1H NMR spectral data. Photoluminescence (PL) study of these complexes has been carried out in powdered form. Characteristic red emitting behavior of Eu(III) ion was observed corresponds to the transition of 5D0→7F2 in PL spectra of Eu(III) complexes. The CIE (Commission Internationale de l'Eclairage) chroma coordinates 1931 and CCT (Correlated Color Temperature) values were derived from the information obtained from the emission spectra. The Judd-Ofelt intensity parameters (Ωτ) and excited state deactivation time (τ) in solid state have also been estimated. In the synthesized Eu(III) complexes, the europium ion was present in an highly polarizable ligand field, as demonstrated by the higher values of Ω2. Values of band gap i.e. optical and electronic as well as the red luminous nature of prepared complexes showed up their utilization in display devices.

Graphene nanosheet reinforcement of polyurethane nanocomposite for green and sustainable photoluminescence, superhydrophobic, and anticorrosive paint.

A simple and environmentally friendly method was developed for smart and efficient waterborne polyurethane (PUR) paint. Sugarcane bagasse was recycled into reduced graphene oxide nanosheets (rGONSs). Both lanthanide-doped aluminate nanoparticles (LAN; photoluminescent agent, 7-9nm) and rGONSs (reinforcement agent) were integrated into a waterborne polyurethane to produce a novel photoluminescent, hydrophobic, and anticorrosive nanocomposite coating. Using ferrocene-based oxidation under masked circumstances, graphene oxide nanosheets were produced from sugarcane bagasse. The oxidized semicarbazide (SCB) nanostructures were integrated into polyurethane coatings as a drying, anticorrosion, and crosslinking agent. Polyurethane coatings with varying amounts of phosphor pigment were prepared and subsequently applied to mild steel. The produced paints (LAN/rGONSs@PUR) were tested for their hydrophobicity, hardness, and scratch resistance. Commission Internationale de l'éclairage (CIE) Laboratory parameters and photoluminescence analysis established the opacity and colourimetric properties of the nanocomposite coatings. When excited at 365 nm, the luminescent transparent paints emitted a strong greenish light at 517 nm. The anticorrosion characteristics of the coated steel were investigated. The phosphor-containing (11% w/w) polyurethane coatings displayed the most pronounced anticorrosion capability and long-persistent luminosity. The prepared waterborne polyurethane paints were very photostable and durable.

Enhancing Light-Emitting Efficiency of Blue Through-Space Charge Transfer Emitters via Fixing Configuration Induced by Intramolecular Hydrogen Bonding.

Closely aligned configuration of the donor (D) and acceptor (A) is crucial for the light-emitting efficiency of thermally activated delayed fluorescence (TADF) materials with through-space charge transfer (TSCT) characteristics. However, precisely controlling the D-A distance of blue TSCT-TADF emitters is still challenging. Herein, an extra donor (D*) located on the side of the primary donor (D) is introduced to construct the hydrogen bonding with A and thus modulate the distance of D and A units to prepare high-efficiency blue TSCT emitters. The obtained "V"-shaped TSCT emitter presents a minimal D-A distance of 2.890 Å with a highly parallel D-A configuration. As a result, a high rate of radiative decay (>107 s-1) and photoluminescence quantum yield (nearly 90%) are achieved. The corresponding blue organic light-emitting diodes show maximum external quantum efficiencies (EQEmax) of 27.9% with a Commission Internationale de L'Eclairage (CIE) coordinate of (0.16, 0.21), which is the highest device efficiency of fluorene-based blue TSCT-TADF emitters. In addition, the TSCT-TADF emitter-sensitized OLEDs also achieve a high EQEmax of 29.3% with a CIE coordinate of (0.12, 0.16) and a narrow emission.

Excited-state Engineering Enables Efficient Deep-blue Light-emitting Diodes Exhibiting BT.2020 Color Gamut.

Organic luminescent materials that exhibit thermally activated delayed fluorescence (TADF) can convert non-emissive triplet excitons into emissive singlet states through a reverse intersystem crossing (RISC) process. Therefore, they have tremendous potential for applications in organic light-emitting diodes (OLEDs). However, with the development of ultra-high definition 4K/8K display technologies, designing efficient deep-blue TADF materials to achieve the Commission Internationale de l'Éclairage (CIE) coordinates fulfilling BT.2020 remains a significant challenge. Here, we propose an effective approach to design deep-blue TADF molecules based on hybrid long- and short-range charge-transfer by incorporation of multiple donor moieties into organoboron multiple resonance acceptors. The resulting TADF molecule exhibits deep-blue emission at 414nm with a full width at half maximum (FWHM) of 29nm, together with a thousand-fold increase in RISC rate. OLEDs based on our champion material achieved a record maximum external quantum efficiency (EQE) of 22.8% with CIE coordinates of (0.163, 0.046), approaching the coordinates of the BT.2020 blue standard. Moreover, TADF-assisted fluorescence devices employing our designed material as a sensitizer exhibited an exceptional EQE of 33.1%. Our work thus provides a blueprint for future development of efficient deep-blue TADF emitters, representing an important milestone towards meeting the blue color gamut standard of BT.2020. This article is protected by copyright. All rights reserved.

Stable All‐Fluorescence White Organic Light‐Emitting Diodes with High Efficiency and High CRI

AbstractWhite organic light‐emitting diodes (WOLEDs) have been regarded as the candidates for next‐generation flat‐panel displays and solid‐state lighting due to their low cost. However, it is still challenging to achieve two‐component WOLEDs with high efficiency, high color index (CRI), and long lifetime. Here, high‐performance all‐fluorescence WOLEDs based on a blue fluorescent emitter and an orange thermally activated delayed fluorescent (TADF) emitter are demonstrated. The optimized all‐fluorescence WOLED with two EMLs presents the maximum external quantum efficiency (EQE), current efficiency (CE), and power efficiency (PE) of 23.4%, 40.2 cd A−1, and 33.2 lm W−1, corresponding to a maximum CRI value of 83.1 and Commission Internationale de L'Eclairage (CIE) coordinate of (0.30, 0.31). To further improve the device stability, the all‐fluorescence WOLEDs with three EMLs and tandem structure are constructed, respectively. Under the premise of ensuring efficiency, in going from the two‐EMLs to the three‐EMLs and the tandem structure, the LT50 (time to 50% of the initial luminance) of all‐fluorescence WOLEDs increase from 601 to 714 h and 1622 h at an initial luminance of 1000 cd m−2. These strategies and results present new insight into the design of all‐fluorescence WOLEDs with high efficiency, high CRI, and extended lifetime.

Tetravalent manganese-doped lithium meta-silicate red-emitting phosphors for LED applications: structural and luminescence properties

In this paper, different concentrations of tetravalent manganese-activated lithium meta-silicate red-emitting phosphors, namely Li2SiO3:xMn4+ (x = 0.01, 0.02, 0.03, 0.04 and 0.05 mol), have been prepared by the solid-state reaction method at 950 °C. The structural, thermal, morphological, and optical properties of the sintered phosphors were characterized by powder X-ray diffractometry (PXRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), raman, UV-Visible and photoluminescence (PL) spectra. Excitation and emission spectra are used to study optical characteristics, which match well with the commercially visible region. The red emission bands for Li2SiO3:0.02Mn4+ peak at approximately 642 nm (λex = 425 nm) and 717 nm (λex = 475 nm), respectively due to the spin-forbidden 2E → 4A2 transition. The doping concentrations of xMn4+ in the Li2SiO3 host were investigated, and the correlations between Mn4+ doping concentration and luminescence intensity were examined. The Commission Internationale de l'Eclairage (CIE) chromatic coordinate graph confirmed the emission color observation in the red region, showed an excellent color purity (CP). In addition, the quantum efficiency (QE) of Li2SiO3:Mn4+ phosphors reached up to 70.51%. The investigation shows that synthesized Li2SiO3:Mn4+ phosphors are beneficial for red Light-Emitting Diodes (LEDs) used in solid-state lighting.

Highly efficient multi-resonance thermally activated delayed fluorescence material toward a BT.2020 deep-blue emitter

An ultrapure deep-blue multi-resonance-induced thermally activated delayed fluorescence material (DOB2-DABNA-A) is designed and synthesized. Benefiting from a fully resonating extended helical π-conjugated system, this compound has a small ΔEST value of 3.6 meV and sufficient spin–orbit coupling to exhibit a high-rate constant for reverse intersystem crossing (kRISC = 1.1 × 106 s–1). Furthermore, an organic light-emitting diode employing DOB2-DABNA-A as an emitter is fabricated; it exhibits ultrapure deep-blue emission at 452 nm with a small full width at half maximum of 24 nm, corresponding to Commission Internationale de l’Éclairage (CIE) coordinates of (0.145, 0.049). The high kRISC value reduces the efficiency roll-off, resulting in a high external quantum efficiency (EQE) of 21.6% at 1000 cd m–2.

Optimizing hexafluoro-2,4-pentanedione based Eu(III) complexes: A comprehensive study on the synthesis, spectroscopic characterization with Judd-Ofelt calculation

Utilizing Europium(III), compounds having eight-coordination geometry of the type [Eu(hfpd)3L2] and [Eu(hfpd)3Lʹ] were synthesized [hfpd = 1,1,1,5,5,5-hexafluoro-2,4-pentanedione, L = tri-octyl-phosphine oxide (TOPO) and Lʹ = 1,10-phenanthroline (phen), Neocuproine (neoc) and bathocuproine (bathoc)] and characterized through elemental, FTIR, CV and Proton-NMR techniques. Photoluminescent studies and quantum yield helped to understand the role of coordination environment and ligands on the emission intensity. Luminescence decay curves served as the basis for calculating the excited-state lifetimes of the synthesized complexes. JO parameters (Ω2, Ω4) and asymmetry ratio were also evaluated to study the coordination environment around the central metal ion. Solid-state complexes exhibited an intense, monochromatic bright red emission, as characterized by its Commission International de l’Eclairage (CIE) color coordinates. Owing to red luminescence and semi-conducting properties, these Eu(III) complexes can be employed as red-emitting material for fabricating lighting devices.

Dual-Emissive γ-[Cu4I8]4- Enables Luminescent Thermochromism in an Organic-Inorganic Hybrid Copper(I) Halide.

A highly luminescent (C13H28N2)2Cu4I8 single crystal containing isolated γ-[Cu4I8]4- anionic cluster was synthesized without the use of unsaturated cations. To the best of our knowledge, compounds bearing such like anions are not dual-emitting under UV excitation. However, dual emission does occur in (C13H28N2)2Cu4I8. Moreover, the emission bands were found to be temperature-sensitive, allowing tuning of the emission colors from blue (0.19, 0.20) to green (0.33, 0.47) in the Commission International de L' Eclairage (CIE) chromaticity coordinates. Remarkably, the color could be restored on returning to the initial temperature, confirming an efficient and reversible luminescent thermochromic effect in (C13H28N2)2Cu4I8. The origin of this excellent optical performance is discussed, and the difference in the mechanism with the dual-emissive Cu(I) halide complexes is also elucidated. Overall, our work provides a promising way to achieve efficient luminescent thermochromism. The developed (C13H28N2)2Cu4I8 represents one of the viable alternatives for eco-friendly luminescent thermochromic materials.

A new yellowish‐green‐emitting phosphor: Eu2+‐doped Ba3YAl2O7.5

AbstractA yellowish‐green emitting phosphor Ba3YAl2O7.5:Eu2+ was synthesized by a solid‐state method. The crystal structure, luminescence, concentration quenching, fluorescence decay, and thermal quenching properties were systematically investigated. Under blue light (440 nm) excitation, Ba3YAl2O7.5:Eu2+ phosphors exhibit a yellowish‐green emission peaking at 550 nm with a full width at half maximum ∼ 69 nm, and The Commission Internationale de l'Eclairage (CIE) coordinates of Ba3YAl2O7.5:Eu2+ are (0.4064, 0.5811). Structural analysis and Van Uitert equation along with fluorescence lifetime analysis reveal that Eu2+ ions occupy 6‐coordinated Y and 9‐coordinated Ba sites in Ba3YAl2O7.5, and therefore generate two emission sub‐bands at 582 and 548 nm. In addition, Ba3YAl2O7.5:Eu2+ phosphor remaining 43% photoluminescence emission intensity at 125°C with an activation energy of 0.372 eV. Utilizing the title phosphor (Ba3YAl2O7.5:3%Eu2+), commercial red (Ca,Sr)AlSiN3:Eu2+ (CSAlSi:Eu2+) phosphor, and InGaN‐based blue light emitting diode (LED) chip, a proof‐of‐concept warm white LEDs (WLEDs) with a color rendering index of 80.1, CIE chromaticity coordinates of (0.411, 0.381), luminous efficacy of ∼ 22.13 lm/W, and correlated color temperature of ∼ 3288 K is achieved. Thus, Eu2+ activated Ba3YAl2O7.5 phosphors have the potential application in WLEDs pumped by a blue LED chip for solid‐state lighting application.

Exploring potential of quantum dots for high power solid-state lighting protected by transparent ceramics

When quantum dot diffusion plates (QDDPs) are used as phosphor conversion materials for high-power lighting, transparent ceramics (TCs) can be used to prevent thermal damage of QDDPs. The spectral, suitable for diverse lighting environments, can be precisely calibrated by modifying their ratio. The temperature dependent photoluminescence spectra, fluorescence lifetime, Huang Rhys factor and activation energy of TCs were studied in detail. It was evident from the results that the intensity of TCs remained above 89% even at 423 K, while fluorescence lifetime remained stable, nearly 64 ns. Huang-Rhys factor and activation energy were consistently measured at 1.81 and 0.13 eV, respectively. The extraordinary luminescent stability of TCs revealed their integral role in providing reliable protection for QDDPs. The spectra of LEDs/LDs were successfully predicted using Monte Carlo ray tracing method. The service condition under high-energy laser was studied using finite element method. White light with Commission Internationale de l'Eclairage (CIE) of (0.38, 0.39) and (0.31, 0.34) and luminous efficiency of 58 and 150 lm/W were prepared by combining QDDPs/TCs with LEDs/LDs, and the Color Rendering Index (CRI) reached a remarkable 88.4 and 78.8. A detailed exploration of the proficient thermal management was accomplished using finite element analysis, with the simulated outcomes matching closely with the experimental results.

White Light Emission via Dual Thermally Activated Delayed Fluorescence from a Single-Component Phenothiazines-Diphenyl Quinoline Conjugate.

White light emission (WLE) via dual thermally activated delayed fluorescence (TADF) from a single-component-based organic system remains challenging as a result of the difficulty in design. Here, we introduce a conformational isomerization approach to achieve WLE from a twisted donor-acceptor (PTzQP1) that comprises two phenothiazines covalently attached to the 6,8-isomeric positions of 2,4-diphenyl quinoline via two C-N single bonds. Spectroscopic studies and quantum chemistry calculations revealed that PTzQP1 shows WLE via simultaneous blue TADF and orange TADF covering the visible range (420-800 nm) with a photoluminescence quantum yield of 45 ± 2% and Commission Internationale de l'Éclairage (CIE) coordinates of 0.30, 0.33. The dual TADF features with high rates of reverse intersystem crossing (kRISC1 = 1.38 × 107 ± 0.24 s-1 and kRISC2 = 5.04 × 106 ± 0.32 s-1) are realized as a result of the low singlet-triplet gaps (S1EQ-T1EQ = 0.04 eV and S1QA-T1QA = 0.05 eV) of the quasi-axial (QA) and quasi-equatorial (QE) conformers. This finding is expected to provide a new direction for designing high-energy-efficient WLE emitters.

Multi-functional ratiometric detection based on dual-emitting N-doped carbon dots

Ratiometric fluorescence probes based on multi-emission carbon dots improve accuracy and sensitivity on detecting various environment issues. Herein, a novel dual-emitting N-doped carbon dots (N-CDs) was synthesized from citric acid and urea via a solvothermal method in N,N-dimethylformamide (DMF). The blue and orange emissions of N-CDs in water were modulated, and pure white light-emitting with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33, 0.33) was achieved. The two PL centers behaved differently for Fe3+, Cu2+ and Ag+ ions, with the limit of detection (LOD) of ppm as fluorescence probes. Additionally, N-CDs displayed unique solvatochromism phenomenon. A new green emission appeared in organic solvents and gradually quenched with the increase of solvent polarity. The ratiometric PL displayed an excellent linear response for detecting water, and the LOD was between 0.003 % and 0.3 % in DMF, ethanol, isopropanol and N-methylpyrrolidone. Furthermore, N-CDs exhibited pH-sensitive response in the range of 4.0–7.0 and temperature-dependent response during heating–cooling cycles between 15 and 70 °C. A simple, efficient and reliable multi-functional ratiometric probe for detecting metal ions, water content, pH and temperature simultaneously was realized. However, there is a need for future application research to overcome the limitation imposed by the excitation wavelength of 330 nm.

Expanding Multiple-Resonance Structure of a Double-Borylated Skeleton by Fusing with Indolocarbazole a Multiple-Resonance Donor for Narrowband Green Emission.

Double-borylated multiple-resonance (MR) skeletons are promising templates for high performance, while the chemical design space is relatively limited. Peripheral segments are often used to decorate/fuse MR skeletons and modulate the photophysics but they can also cause unwanted spectral broadening. Herein, a narrowband MR emitter ICzDBA by fusing an MR-featured donor segment indolocarbazole into a double-borylated MR skeleton is developed. In ICzDBA, the nitrogen atom located away from the core benzene ring can also contribute to the generation of the overall MR-featured distribution through the long-range conjugation effect, along with the other boron/nitrogen atoms on the phenyl center. Thus, ICzDBA in toluene displays a narrowband emission peaking at 507nm with a full width at half maximum of merely 20nm (0.09eV). Moreover, organic light-emitting diode devices using ICzDBA emitter exhibit ultrapure green emission with Commission Internationale de l'Eclairage (CIE) coordinates of (0.27, 0.70) and a high external quantum efficiency of 32.5%. These results manifest the importance of MR characters of peripheral decorations/fusions in preserving the narrowband features of MR skeletons, which provides a solution for further expanding MR structures with well-maintained narrowband characters.

Highly efficient and stable solution-processed deep-blue OLEDs with LT95 over 50 h at 1000 nit

Stable solution-processable emitters, particularly deep-blue emitters, are critical for cost-effective and energy-efficient organic light-emitting diodes (OLEDs). In this study, three new multiple resonance (MR) type deep blue emitters with through dual-introduction of methyl and adamantyl as end-capped groups are designed for highly efficient and stable blue fluorescent OLEDs, contributing to doubled device lifetime. Through end-capped modification, the excited states are stabilized via reducing vibronic couplings. Stable deep blue device based on m-DABNA-AdCz are achieved with high current efficiency (CE) of 6.0 cd/A in solution process fluorescent OLEDs and device lifetime up to 95 % of the initial luminance (LT95) of 55.7 h at 1000 cd m−2, along with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.133, 0.076). This lifetime is the best yet among solution-processed OLEDs of CIEy < 0.08 according to literature to our best knowledge. This work presents a viable strategy for the development of high-performance solution process deep blue fluorescent OLEDs with high color purity and long device lifetime.

Afterglow of Dual‐Confined Carbon Dots Ranging from Blue to Near‐Infrared

AbstractComprehensive research into afterglow emission in the near‐infrared (NIR) region of carbon dots (CDs) is currently lacking. In this study, highly efficient multicolor CDs are synthesized with fluorescence from blue to NIR using Rhodamine 6G. Boron oxide (B2O3) is employed as a matrix for encapsulating and confining the CDs, inhibiting triplet exciton quenching. Furthermore, structural rigidity is enhanced due to the formation of carbon‐boron (C─B) covalent bonds between CDs and B2O3, achieving tunable afterglow emission ranging from 463 to 722 nm with lifetimes up to 801 ms. The green–yellow afterglow composite exhibits an impressive quantum yield up to 37.67% while demonstrating thermally activated delayed fluorescence (TADF). Thus, this composite is coated onto a blue alternating‐current light‐emitting diode (BAC‐LED) to fabricate a white AC‐LED, which is successfully prepared with Commission Internationale de L'Eclairage (CIE) at coordinates of (0.32, 0.34), accompanied by the color rendering index (CRI) reaching 81.1. The bright afterglow compensates for zero‐point flickering in the BAC‐LED, resulting in stable and gentle emission. The potential applications of these luminescent materials in optoelectronic devices are undoubtedly widened by this remarkable advancement.

Synthesis and characterization of a blue host polymer incorporating a chrysene moiety for solution-processed OLEDs

We synthesized two blue fluorescent materials, 6-(3-vinylphenyl)chrysene (St-C) and 6,12-bis(3-vinylphenyl)chrysene (St-C-St), for the first time, incorporating styrene into a chrysene core. These materials were polymerized via radical polymerization, resulting in the formation of polymeric blue-emitting materials, Poly 6-(3-vinylphenyl)chrysene (Poly St-C) and Poly 6,12-bis(3-vinylphenyl)chrysene (Poly St-C-St). Poly St-C exhibited deep blue emission at 395 nm in solution state. We fabricated Organic Light-Emitting Diode (OLED) devices, employing Poly St-C as the host material and 6,12-bis[4-(diphenylamino)phenyl]chrysene (TPA-C-TPA) as the dopant. The OLED device displayed electroluminescence (EL) emission in the deep blue region and achieved Commission Internationale de l‘Éclairage (CIE) coordinates of (0.157, 0.078).

Spectroscopic studies of TeO2-based glasses doped with Sm3+ and its use as an optical temperature sensor

This study reports the synthesis and characterization of glasses in the (100-x)65TeO2-15Li2O-20ZnO + xSm2O3 system doped with Sm2O3, denoted as Sm3+: TLZ glasses, with varying doping concentrations from 0.1, 0.15, 0.2, 0.35, 0.5, and 1 mol%. The structural and optical properties, as well as the temperature dependence of luminescence, were investigated. Excitation at 405nm resulted in strong orange-red luminescence at 566, 600, and 646 nm. The local environment surrounding Sm3+ ions was explored using the intensity ratio of electric and magnetic dipole transitions. The non-radiative energy transfer between neighboring Sm3+ ions was evaluated using the Inokuti-Hirayama model, allowing for the determination of the critical transfer distance. The temperature dependence of luminescence, displayed by Commission Internationale de L’Eclairage (CIE) chromaticity coordinates, exhibited a monotonic change from (0.611, 0.387) at 295 K to (0.605, 0.393) at 479 K. The Sm3+:TLZ glasses doped with 0.15 mol% showed the highest relative thermal sensitivity of 0.10%K-1 at 479 K, suggesting their potential as luminescent thermometers.

Ho3+ -doped BaGd2 ZnO5 green-emitting phosphor for solid-state lighting: synthesis, characterization, and photoluminescence properties.

In this work, we present the synthesis of a green-emitting series of BaGd2 ZnO5 :xHo3+ (0.5-3mol%) phosphors using a high-temperature solid-state reaction method. Phase purity and crystal structure information were evaluated through X-ray powder diffraction patterns. Optical properties were examined through diffuse reflectance spectra, revealing that the prepared phosphor exhibited a band gap of 4.65 eV. The effect of Ho3+ doping on the morphology and ion distribution on the surface was assessed using scanning electron microscopy and time-of-flight secondary ion mass spectrometry techniques, respectively. The excitation spectra of the synthesized phosphor exhibited a charge transfer band and strong absorption transitions. The emission spectra displayed typical holmium emission characteristics, featuring a strong green emission band associated with f-f transitions from 5 F4 + 2 S2 → 5 I8 . Decay dynamics of the synthesized phosphor exhibited a single-exponential decay pattern, with lifetimes ranging from 0.103 to 0.053 ms. The intrinsic radiative lifetime, calculated through Auzel's fitting was determined to be 0.14 ms. Using the emission spectra, colorimetric behaviour was analyzed, revealing that the Commission Internationale de l'éclairage (CIE) coordinates exclusively lay within the green region at (0.285, 0.705), with an impressive colour purity of 99.6%. Given these marked properties, the synthesized phosphor exhibits great potential for a wide range of green-emitting applications, including displays, white light-emitting diodes, and security signage.