Commercial Electronic Devices Research Articles

Submerged and completely open solid–liquid triboelectric nanogenerator for water wave energy harvesting

AbstractTriboelectric nanogenerator (TENG) is an emerging wave energy harvesting technology with excellent potential. However, due to issues with sealing, anchoring, and difficult deployment over large areas, TENG still cannot achieve large‐scale wave energy capture. Here, a submerged and completely open solid–liquid TENG (SOSL‐TENG) is developed for ocean wave energy harvesting. The SOSL‐TENG is adapted to various water environments. Due to its simple structure, it is easy to deploy into various marine engineering facilities in service. Importantly, this not only solves the problem of difficult construction of TENG networks at present, but also effectively utilizes high‐quality wave energy resources. The working mechanism and output performance of the SOSL‐TENG are systematically investigated. With optimal triggering conditions, the transferred charge (Qtr) and short‐circuit current (Isc) of SOSL‐TENG are 2.58 μC and 85.9 μA, respectively. The wave tank experiment is taken for fully demonstrating the superiority of the SOSL‐TENG network in large‐scale collection and conversion of wave energy. Due to the excellent output performance, TENG can harvest wave energy to provide power for various commercial electronic devices such as LED beads, hygrothermograph, and warning lights. Importantly, the SOSL‐TENG networks realizes self‐powered for electrochemical systems, which provides a direction for energy cleanliness in industrial systems. This work provides a prospective strategy for large‐scale deployment of TENG applications, especially for harvesting wave energy in spray splash zones or at the surface of the water.image

Bright unintended electromagnetic radiation from second-generation Starlink satellites

We report on the detection of unintended electromagnetic radiation (UEMR) from the second-generation of Starlink satellites. Observations with the LOFAR radio telescope between 10 to 88 MHz and 110 to 188 MHz show broadband emission covering the frequency ranges from 40 to 70 MHz and 110 to 188 MHz from the v2-Mini and v2-Mini Direct-to-Cell Starlink satellites. The spectral power flux density of this broadband UEMR varies from satellite to satellite, with values ranging from 15 to 1300 Jy, between 56 and 66 MHz, and from 2 to 100 Jy over two distinct 8 MHz frequency ranges centered at 120 and 161 MHz. We compared the detected power flux densities of this UEMR to that emitted by the first generation v1.0 and v1.5 Starlink satellites. When correcting for the observed satellite distances, we find that the second-generation satellites emit UEMR that is up to a factor of 32 stronger compared to the first generation. The calculated electric field strengths of the detected UEMR exceed typical electromagnetic compatibility standards used for commercial electronic devices as well as recommended emission thresholds from the Radiocommunication Sector of the International Telecommunications Union (ITU-R) aimed at protecting the 150.05–153 MHz frequency range allocated to radio astronomy. We characterize the properties of the detected UEMR with the aim of assisting the satellite operator with the identification of the cause of the UEMR.

Ambient Moisture-Driven Self-Powered Iontophoresis Patch for Enhanced Transdermal Drug Delivery.

Iontophoretic transdermal drug delivery (TDD) devices are known to enhance the transdermal transport of drugs. However, conventional transdermal iontophoretic devices require external power sources, wired connections, or mechanical parts, which reduce the comfort level for patients during extended use. In this work, a self-powered, wearable transdermal iontophoretic patch (TIP) is proposed by harvesting ambient humidity for energy generation, enabling controlled TDD. This patch primarily uses moist-electric generators (MEGs) as its power source, thus obviating the need for complex power management modules and mechanical components. A single MEG unit can produce an open-circuit voltage of 0.80V and a short-circuit current of 11.65µA under the condition of 80% relative humidity. Amplification of the electrical output is feasible by connecting multiple generator units in series and parallel, facilitating the powering of certain commercial electronic devices. Subsequently, the MEG array is integrated with the TDD circuit to create the wearable TIP. After 20 min of application, the depth of drug penetration through the skin is observed to increase threefold. The effective promotion effect of TIP on the transdermal delivery of ionized drugs is corroborated by simulations and experiments. This wearable TIP offers a simple, noninvasive solution for TDD.

Optimizing Method for Photovoltaic Water-Pumping Systems under Partial Shading and Changing Pump Head

Photovoltaic systems for pumping water, based on direct current powered motor pumps, have great application in small rural regions without electrical networks. In addition, these systems provide environmental benefits by replacing fossil fuels. However, these systems reduce their performance due to partial shading, which is magnified by the internal mismatch of the PV modules. This work proposes an intelligent, low-cost, and automatic method to mitigate these effects through the electrical reconfiguration of the PV array. Unlike other reported techniques, this method considers the pump head variations. For that, the global voltage and current supplied by the PV array to the motor pump subsystem are introduced to an artificial neural network and to a third-order equation, which locates the shaded PV module and detects the pump head, respectively. A connection control implements the optimal electrical rearrangement. The selection is based on the identified partial shading pattern and pump head. Finally, the switching matrix modifies the electrical connections between the PV modules on the PV array without changing the interconnection scheme, PV array dimension, or physical location of the PVMs. The proposed approach was implemented in a real PV water pumping system. Low-cost and commercial electronic devices were used. The experimental results show that the output power of the PV array increased by 8.43%, which maintains a more stable level of water extraction and, therefore, a constant flow level.

A Self‐Powered Dual Ratchet Angle Sensing System for Digital Twins and Smart Healthcare

AbstractIn the swiftly progressing landscape of wearable electronics and the Internet of Things (IoTs), there is a burgeoning demand for devices that are lightweight, cost‐effective, and self‐powered. In this study, a self‐powered bidirectional knee joint motion monitoring system is introduced, leveraging a dual ratchet sensing (DRS) system fabricated using 3D printing technology. This approach offers substantial economic and portability benefits. The DRS system is engineered to harness the negative work generated from knee joint movements to power commercial electronic devices, obviating the need for additional metabolic energy from the human body. By synergizing the DRS with virtual reality technology, it becomes feasible to monitor knee joint movements in real‐time with remarkable accuracy, presenting a novel avenue for the integration of digital twin technology. Through the amalgamation of convolutional neural network machine learning algorithms with Bayesian optimization techniques, the DRS system can discern up to 97% of knee joint movements, paving the way for innovative applications in smart rehabilitation and healthcare.

Modified Wood Fibers Spontaneously Harvest Electricity from Moisture.

With the rapid development of modern society, our demand for energy is increasing. And the extensive use of fossil energy has triggered a series of problems such as an energy crisis and environmental pollution. A moisture-enabled electric generator (MEG) is a new type of energy conversion method, which can directly convert the ubiquitous moisture in the air into electrical energy equipment. It has attracted great interest for its renewable and environmentally friendly qualities. At present, most MEGs still have low power density, strong dependence on high humidity, and high cost. Herein, we report the development of a high-efficiency MEG based on a lignocellulosic fiber frame with high-power-density, all-weather, and low-cost characteristics using a simple strategy that optimizes the charge transport channel and ion concentration difference. The MEG devices we manufactured can generate the open-circuit voltage of 0.73 V and the short-circuit current of 360 μA, and the voltage can still reach 0.6 V at less than 30% humidity. It is possible to drive commercial electronic devices such as light-emitting diodes, electronic displays, and electronic calculators by simply connecting several electric generators in series. Biomass-based moisture-enabled electric generation has a low cost, is easy to integrate on a large scale, and is green and pollution-free, providing clean energy for low-humidity or high-electricity-cost areas.

Enhancing the Output Performance of Triboelectric Nanogenerator Based on Soft‐Contact Coaxial Double‐Rotation Structure

AbstractAs a promising energy technology, triboelectric nanogenerator (TENG) has garnered wide attention across various fields. The rotating structure‐based TENG exhibits superior output performance and energy conversion efficiency. However, further improvement is required in terms of output performance, and the issue of serious friction and wear between the materials in the friction layer needs to be addressed. In this work, A coaxial double‐rotation soft‐contact material based TENG (DR‐TENG) with characteristics of low wear and high output is fabricated. The introduction of soft‐contact material reduces frictional resistance and material wear, while the design and optimization of double‐rotation structures further enhance the output performance of TENG. The output current of DR‐TENG using rabbit furs as friction material can reach 144 µA after rectification. Experimental results demonstrate the excellent power supply capability of DR‐TENG. The output of DR‐TENG can be used to power commercial electronic devices after being stored by capacitance. The DR‐TENG is successfully applied for cathodic protection. The outcomes reveal that the open‐circuit potential of Q235 carbon steel can be reduced by 500 mV, which has a remarkable anti‐corrosion effect. These results confirm the broad application prospects of TENG in metal corrosion protection.

Highly Stretchable, Knittable, Wearable Fiberform Hydrovoltaic Generators Driven by Water Transpiration for Portable Self-Power Supply and Self-Powered Strain Sensor.

The development of excellently stretchable, highly mobile, and sustainable power supplies is of great importance for self-power wearable electronics. Transpiration-driven hydrovoltaic power generator (HPG) has been demonstrated to be a promising energy harvesting strategy with the advantages of negative heat and zero-carbon emissions. Herein, this work demonstrates a fiber-based stretchable HPG with the advantages of high output, portability, knittability, and sustainable power generation. Based on the functionalized micro-nano water diffusion channels constructed by the discarded mask straps (MSs) and oxidation-treated carbon nanomaterials, the applied water can continuously produce electricity during the spontaneous flow and diffusion. Experimentally, when a tiny 0.1mL of water encounters one end of the proposed HPG, the centimeter-length device can yield a peak voltage of 0.43V, peak current of 29.5µA, and energy density of 5.833mWhcm-3. By efficiently integrating multiple power generation units, sufficient output power can be provided to drive commercial electronic devices even in the stretched state. Furthermore, due to the reversibility of the electrical output during dynamic stretching-releasing, it can passively convert physiological activities and motion behaviors into quantifiable and processable current signals, opening up HPG's application in the field of self-powered wearable sensing.

Assessment of Data Capture Conditions Effect on Reverse Electrodialysis Process Using a DC Electronic Load

Reverse electrodialysis (RED), an emerging membrane-based technology, harnesses salinity gradient energy for sustainable power generation. Accurate characterization of electrical parameters in RED stacks is crucial to monitoring its performance and exploring possible applications. In this study, a DC electronic load module (DCELM) is implemented in a constant current condition (CC mode) for characterization of lab scale RED process, using a RED prototype in-house designed and manufactured (RU1), at different data capture setups (DCS), on which the total number of steps for data capture (NS) and the number of measurements per step (ρ) are the parameters that were modified to study their effect on obtained electrical parameters in RED. NS of 10, 50, and 100 and ρ of 10 and 20 were used with this purpose. The accuracy of resulting current and voltage steps can be enhanced by increasing NS and ρ values, and according to obtained results, the higher accuracy of resulting output current and voltage steps, with low uncertainty of the average output steps (AOS) inside the operational region of power curve, was obtained using a DCS of NS = 100 and ρ = 20. The developed DCELM is a low-cost alternative to commercial electronic load devices, and the proposed methodology in this study represents an adaptative and optimizable CC mode characterization of RED process. The results obtained in this study suggest that data capture conditions have a direct influence of RED performance, and the accuracy of electrical parameters can be improved by optimizing the DCS parameters, according to the required specifications and the scale of RED prototypes.

Modifying the trajectory of epicardial leads can substantially reduce MRI-induced RF heating in pediatric patients with a cardiac implantable electronic device at 1.5T.

After epicardial cardiac implantable electronic devices are implanted in pediatric patients, they become ineligible to receive MRI exams due to an elevated risk of RF heating. We investigated whether simple modifications in the trajectories of epicardial leads could substantially and reliably reduce RF heating during MRI at 1.5 T, with benefits extending to abandoned leads. Electromagnetic simulations were performed to assess RF heating of two common 35-cm epicardial lead trajectories exhibiting different degrees of coupling with MRI incident electric fields. Experiments in anthropomorphic phantoms implanted with commercial cardiac implantable electronic devices confirmed the findings. Both electromagnetic simulations and experimental measurements were performed using head-first and feet-first positioning and various landmarks. Transfer function approach was used to assess the performance of suggested modifications in realistic body models. Simulations (head-first, chest landmark) of a 35-cm epicardial lead with a trajectory where the excess length of the lead was looped and placed on the inferior surface of the heart showed an 87-fold reduction in the 0.1 g-averaged specific absorption rate compared with the lead where the excess length was looped on the anterior surface. Repeated experiments with a commercial epicardial device confirmed this. For fully implanted systems following low-specific absorption rate trajectories, there was a 16-fold reduction in the average temperature rise and a 28-fold reduction for abandoned leads. The transfer function method predicted a 7-fold reduction in the RF heating in 336 realistic scenarios. Surgical modification of epicardial lead trajectory can substantially reduce RF heating at 1.5 T, with benefits extending to abandoned leads.

Dual Mode TENG with Self‐Voltage Multiplying Circuit for Blue Energy Harvesting and Water Wave Monitoring

AbstractAs the most extensive natural energy on earth, ocean wave energy is regarded as a difficult energy to be fully and efficiently utilized because of its low frequency and multi‐direction movement. Herein, a versatile blue energy triboelectric nanogenerator (VBE‐TENG) fabricated by using dual‐mode output terminals with charge excitation strategy is reported, which can harvest varying water‐wave energy effectively. Benefiting from the rolling ball on a specific track and the compression rebound characteristics of a spring sheet steel, the carrier can be driven along a specific path through random ocean wave energy, and then the energy is converted into electricity by VBE‐TENG. A high peak output power of 34.3 mW is obtained, 2.5 times as much as that of current highest record based on a device unit in blue energy TENG. In addition, the TENG can light 256 LEDs and continuously power commercial electronic devices in wave environments. The average peak voltage of contact‐separation TENG is converted into virtual signal via Labview software to provide wave height monitoring as a self‐powered sensing system. This work provides a new approach in blue energy TENG toward practical applications.

A speed-amplified tri-stable piezoelectric-electromagnetic-triboelectric hybrid energy harvester for low-frequency applications

This work proposes a new speed-amplified multi-stable tri-hybrid energy harvesting technique via the multi-stable nonlinearity enhanced frequency up-conversion and rack-pinion mechanisms to efficiently harness structural and biomechanical vibration energy. In the present design, two frequency up-conversion piezoelectric generators, an array-type electromagnetic generator and a sliding-mode triboelectric nanogenerator are integrated together to form a compact and interactive system. By utilizing the rack-pinion mechanism, the relative speed between the stators and the translators of the electromagnetic and triboelectric generators are both doubled. Meanwhile, the process of frequency up-conversion in the piezoelectric generators is also doubled per each cycle. This results in better performance under wideband and low-frequency vibration sources. For verification, a prototype of this design is tested by mechanical excitations and body-induced motions. In the shaker test, the prototype can generate a peak output power of 446.16 mW under an optimal resistance load, resulting in a normalized power density of 4.20 mW cm–3 g–2 at 5 Hz under 1 g. The prototype also exhibits exceptional performance under various human motion tests, it can drive 600 commercial light-emitting diodes simultaneously. Using a commercial DC/DC voltage regulator circuit, the proposed harvester can serve as a universal power source to charge commercial electronic devices, including smartphones and GPS sensors. The present design shows great potential as a sustainable power source for wearable/portable electronics as well as wireless monitoring systems.

In Situ Growth of NiCoSe Nanoparticles/Holey Carbon Nanosheet on Carbon Cloth as an Efficient Sulfur Host for Flexible Li–S Batteries

Recently, commercial wearable electronic devices have gradually attracted research interest in flexible batteries. The electrode is the crucial component of a flexible lithium-sulfur battery, which restricts the development of flexible lithium-sulfur batteries (LSBs). Here, NiCoSe/holey carbon nanosheet in situ grown on carbon cloth (NiCoSe/CNS/CC) was successfully synthesized and used as an efficient sulfur host for the flexible sulfur cathode. Its special structure also provides optimal conditions for the loading of sulfur and promotes efficient transport of both electrons and Li-ions. Numerous polar NiCoSe nanoparticles are attached to the surface of carbon fibers, which can effectively anchor lithium polysulfides (LiPSs) by chemisorption and accelerate their conversion. Benefiting from this special architecture and the polar NiCoSe nanoparticles, the NiCoSe/CNS/CC/S demonstrates excellent electrochemical performance. At 1C, the NiCoSe/CNS/CC/S electrode delivers a discharge capacity of 454 mA h g−1 after 600 cycles. Furthermore, even at 2C, after 600 cycles, it still maintains a capacity of 426 mA h g−1, with a capacity decay of 0.079% per cycle. The NiCoSe/CNS/CC/S electrode enriches the flexible sulfur cathodes with its excellent electrochemical and mechanical properties while providing a new path for the research of flexible LSBs.

An Efficient Ambient-Moisture-Driven Wearable Electrical Power Generator.

Existing devices for generating electrical power from water vapor in ambient air require high levels of relative humidity (RH), cannot operate for prolonged periods, and provide insufficient output for most practical applications. Here a heterogeneous moisture-driven electrical power generator (MODEG) is developed in the form of a free-standing bilayer of polyelectrolyte films, one consisting of a hygroscopic matrix of graphene oxide(GO)/polyaniline(PANI) [(GO)PANI] and the other consisting of poly(diallyldimethylammonium chloride)(PDDA)-modified fluorinated Nafion (F-Nafion (PDDA)). One MODEG unit (1 cm2 ) can deliver a stable open-circuit output of 0.9V at 8µA for more than 10h with a matching external load. The device works over a wide range of temperature (-20 to +50 °C) and relative humidity (30% to 95% RH). It is shown that series and parallel combinations of MODEG units can directly supply sufficient power to drive commercial electronic devices such as light bulbs, supercapacitors, circuit boards, and screen displays. The (GO)PANI:F-Nafion (PDDA) hybrid film is embedded in a mask to harvest the energy from exhaled water vapor in human breath under real-life conditions. The device could consistently generate 450-600mV during usual breathing, and provides sufficient power to drive medical devices, wearables, and emergency communication.

A coactive performance of Ag2WO4 nanorods wreathed on the N-doped carbon nanofibers as electrode for electrochemical supercapacitors

The thriving energy demand of the gradually increasing population and modernised life style requires development in energy storage devices for usage in commercial electronic devices. In this particular work, we have explored electrochemical performances of bimetallic oxide Ag2WO4 nanorods and tuned its performance by decorating it on the nitrogen doped carbon nanofiber (N-CNF). The Ag2WO4 nanorods are synthesised by a facile route of co-precipitation method followed by ultrasonication with N-CNF. The synthesised Ag2WO4 nanorods was found electrochemically active and the incorporation of N-CNF end up boosting its electrochemical performances. The obtained nanocomposites were characterised by various advanced techniques. The amount of N-CNF was determined by characterisation via the potentiostatic and galvanostatic cycle measurements and electrochemical impedance spectroscopy (EIS). The electrochemically active Ag2WO4 with 20 wt. % of N-CNF (Ag2WO4/N-CNFb) exhibited 2.2-fold higher charge storage capacity than pristine Ag2WO4. The Ag2WO4/N-CNFb exhibited specific capacitance as high as 330 F g-1 at a constant applied current density of 1 A g-1 in 1 M KOH. The improved capacity may be due to conductive pathways provided by N-CNF. The Ag2WO4 got well decorated over the N-CNF facilitating the active sites interaction with electrolyte. The symmetric device fabricated with Ag2WO4/N-CNFb electrodes exhibited excellent energy density of 10 W h kg-1 at 6000 W kg-1 at 5 A g-1. The Ag2WO4/N-CNFb electrode long-term stability has been minutely observed; the high Coulombic efficiency of 90% and high rate of capacity retention 98% even after 3000 cycles. Owing to these excellent electrochemical properties, the research work can potentially widen the opportunity to explore other profound bimetallic oxides and its nanocomposites with conductive carbon-based matrix for energy storage applications.

Recent Advances in Bitterness-Sensing Systems.

Bitterness is one of the basic tastes, and sensing bitterness plays a significant role in mammals recognizing toxic substances. The bitter taste of food and oral medicines may decrease consumer compliance. As a result, many efforts have been made to mask or decrease the bitterness in food and oral pharmaceutical products. The detection of bitterness is critical to evaluate how successful the taste-masking technology is, and many novel taste-sensing systems have been developed on the basis of various interaction mechanisms. In this review, we summarize the progress of bitterness response mechanisms and the development of novel sensors in detecting bitterness ranging from commercial electronic devices based on modified electrodes to micro-type sensors functionalized with taste cells, polymeric membranes, and other materials in the last two decades. The challenges and potential solutions to improve the taste sensor quality are also discussed.

Potential for Early Noninvasive COVID-19 Detection Using Electronic-Nose Technologies and Disease-Specific VOC Metabolic Biomarkers.

The established efficacy of electronic volatile organic compound (VOC) detection technologies as diagnostic tools for noninvasive early detection of COVID-19 and related coronaviruses has been demonstrated from multiple studies using a variety of experimental and commercial electronic devices capable of detecting precise mixtures of VOC emissions in human breath. The activities of numerous global research teams, developing novel electronic-nose (e-nose) devices and diagnostic methods, have generated empirical laboratory and clinical trial test results based on the detection of different types of host VOC-biomarker metabolites from specific chemical classes. COVID-19-specific volatile biomarkers are derived from disease-induced changes in host metabolic pathways by SARS-CoV-2 viral pathogenesis. The unique mechanisms proposed from recent researchers to explain how COVID-19 causes damage to multiple organ systems throughout the body are associated with unique symptom combinations, cytokine storms and physiological cascades that disrupt normal biochemical processes through gene dysregulation to generate disease-specific VOC metabolites targeted for e-nose detection. This paper reviewed recent methods and applications of e-nose and related VOC-detection devices for early, noninvasive diagnosis of SARS-CoV-2 infections. In addition, metabolomic (quantitative) COVID-19 disease-specific chemical biomarkers, consisting of host-derived VOCs identified from exhaled breath of patients, were summarized as possible sources of volatile metabolic biomarkers useful for confirming and supporting e-nose diagnoses.

Self-healable, stretchable triboelectric nanogenerators based on flexible polyimide for energy harvesting and self-powered sensors

Self-healing triboelectric nanogenerators (TENGs) are new, stable and durable energy harvesters. Polyimide (PI) is a promising negatively charged material that has been widely developed as a negative friction material for TENGs, but self-healing PI-based TENGs are currently vacant. Here, we reported a self-healing TENG device fabricated by self-healing PI for energy harvesting and motion sensing. The designed and fabricated PI-based TENGs exhibited excellent intrinsic self-healing and shape tailorability properties. The self-healing properties are derived from the dynamic disulfide bond exchange and flexible PDMS fragments in the PI backbone, which can recover its damage and output performance at 100 °C for 3 h. The output performance of the fabricated 6FDA-4PDA-PDMS-PI-based TENG was double that of the normal PI-based TENG due to CF3 electron-absorbing groups and siloxane fragments in the PI backbone. Finally, the applications of self-healing PI-based TENGs to harvest energy to drive commercial electronic devices and joint motion sensing were demonstrated. This work provides theoretical guidance for the fabrication of self-healing TENGs with reliable output performance and practical applications, contributing to the future of sustainable energy and wearable electronics.

Device discovery and tracing in the Bluetooth Low Energy domain

Bluetooth Low Energy (BLE) is a pervasive wireless technology all around us today. It is included in most commercial consumer electronic devices manufactured in the last years, and billions of BLE-enabled devices are produced every year, mostly wearable or portable ones like smartphones, smartwatches, and smartbands. The success of BLE as a cornerstone in the Internet of Things (IoT) and consumer electronics is both an advantage, enabling short range, low cost, and low power consumption wireless communications, and a disadvantage, from a security and privacy standpoint. BLE exposes packets that enable a potential attacker to detect, enquire and fingerprint actual devices despite manufacturers’ attempts to avoid detection and tracking. Medium Access Control (MAC) address randomization was introduced in the BLE standard to solve some of these issues. In this paper we discuss how to detect and fingerprint BLE devices, basing our analysis and data collection on interactions allowed by the standard. In our study, we propose the Bluetooth Low Energy Nodes Detect, Enquire, (and) Recognition (BLENDER) framework for enumerating and fingerprinting BLE devices for crowd monitoring and recognition purposes, based on four different strategies used to analyze BLE-enabled devices. We will show that it is possible to associate BLE randomized MAC addresses to actual devices. We will then describe a proof of concept for large-scale data collection. In addition, to determine the spots where the stations could be optimally positioned, we created a synthetic dataset based on mobility models and then we emulated the BLENDER approach. The latter allowed training Machine Learning models to predict the expected number of devices appearing at any particular position, day, and hour.

High-performance porous copolymer hydrogel for oceanic electricity generation

Micro/nano fluidic electricity generation systems based on solid–liquid interface interaction to harvest energy from water in nature offer a potential green and clean electricity generation method. However, the performances of electricity generation were limited in salt solutions. In this paper, we prepared an extraordinary-performance hydrogel through ultraviolet polymerization for the access of ion concentration energy in seawater. This copolymer hydrogel made of AAm/AA (acrylamide/acrylic acid) provides a negatively charged three-dimensional transport network with micro/nano porous channels, which exhibits extraordinary ion selectivity in high ion concentration solutions. The experimental results show that this electricity generation device with intrinsic micro/nano pores can generate a continuous open-circuit voltage of 0.37 V, a short-circuit current of 116 μA, and a power density of 89.4 µW/cm2 from seawater (the Yellow Sea in China). The output current and power can be maximally more than 100 times and 50 times higher than the existing results. Through the series connection of six devices, the overall output is sufficient to supply stable power to directly light up small commercial electronic devices. Our study presents a new research idea for the development of low-cost, environmentally friendly, and self-powered devices.