Combined Sum Frequency Generation Research Articles

Electrostatics Trigger Interfacial Self-Assembly of Bacterial Ice Nucleators.

Ice active bacteria can catalyze water freezing at high subzero temperatures using ice nucleating proteins (INPs) located at their outer cell walls. INPs are the most effective ice nucleators known and are of significant interest for agriculture, climate research, and freeze/antifreeze technologies. The aggregation of INPs into large ice nucleation sites is a key step for effective ice nucleation. It has been proposed that ice active bacteria can drive the aggregation of INPs and thereby trigger ice nucleation. However, the mechanism of INP aggregate assembly and the molecular processes behind the activation are still unclear. Both biochemical pathways and activation through electrostatics have been proposed based on experiments with lysed ice active bacteria. For a more direct view on the assembly of INPs, we follow the structure and water interactions of a synthetic model INP of the well-studied ice bacterium Pseudomonas syringae at the air-water interface as a function of the subphase pH. By combining sum frequency generation spectroscopy with two-dimensional infrared spectra, we conclude that self-assembly and electrostatic interactions drive the formation of ordered INP structures capable of aligning interfacial water.

Potassium Hydroxide Concentration-Dependent Water Structure on the Quartz Surface Studied by Combining Sum-Frequency Generation (SFG) Spectroscopy and Molecular Simulations.

Vibrational sum-frequency generation (SFG) spectroscopy and molecular simulations were used to investigate the molecular structures at the quartz surface, and the influence of bulk potassium hydroxide concentration was systematically examined. It was found that when the potassium hydroxide concentration was less than 10-2 M, the structure of water molecules at the quartz surface was dependent on the quartz surface potential as evidenced by the increase of SFG signal as a function of the alkaline concentration. However, when the alkaline concentration was more than 10-2 M, a monotonic decrease of interfacial water SFG spectra intensity was observed, which has been proposed to be due to the decreased number of interfacial water molecules and proton disordering caused by the screening effect originated from the adsorption of cations. Furthermore, besides the typical hydrogen-bonded interfacial water peaks (3200 and 3400 cm-1), the quartz/H2O interface showed an additional red-shifted peak centered at ∼2930 cm-1. The results of SFG spectra and chemistry calculations confirmed that the red-shifted vibrational peak was due to the O-H stretch vibration of water molecules strongly hydrogen bonded with the OH- adsorbed at the surface.

Interfacial Water Features at Air-Water Interfaces as Influenced by Charged Surfactants.

The features of interfacial water at air-water interfaces of anionic sodium dodecyl sulfate (SDS) and cationic dodecyl amine hydrochloride (DDA) solutions were examined by combining sum frequency generation (SFG) vibrational spectroscopy measurements and molecular dynamics simulations (MDS). The SFG spectra revealed that interfacial water molecules for SDS solutions were highly ordered compared with those for DDA solutions. To elucidate this observation, in addition to agreement with the literature in regards to the interfacial electric field at the interfaces, we investigated the features of interfacial water molecules with respect to their network and their interaction with surfactant head groups. Our simulation analysis results revealed a higher number density, more strongly connected hydrogen bonding, and more orderly oriented interfacial water molecules at the interface of the SDS solutions as compared to the DDA solutions. The goal of this research is to identify significant features of interfacial water for our improved understanding of such interfacial phenomena.

Interaction of Water with the Gypsum (010) Surface: Structure and Dynamics from Nonlinear Vibrational Spectroscopy and Ab Initio Molecular Dynamics.

Water-mineral interfaces are important for several environmental, industrial, biological, and geological processes. Gypsum, CaSO4·2H2O, is a widespread mineral of high technological, medical, and environmental relevance, but little is known about its surface structure and its interaction with water. A molecular-level understanding of gypsum/water interface is given here by a combined experimental/theoretical study. We investigate the structure and dynamics of water adsorbed from vapor on the gypsum (010) single-crystal surface at room temperature, combining sum-frequency generation (SFG) vibrational spectroscopy experiments and ab initio molecular dynamics (AIMD) simulations. The SFG spectra of gypsum at low relative humidity (RH) show an anisotropic arrangement of structural water molecules and the presence of dangling OH groups. The AIMD simulations allow a detailed assignment of the SFG spectra and show that the cleaved (010) surface rearranges to have only 25% of the OH groups pointing away from the surface. At higher RHs, the first adsorbed water layer binds to these OH groups and forms an anisotropic arrangement, but with the amount of free OH groups significantly suppressed and without any significant diffusion. Upon adsorption of a second water layer, although the topmost layer of molecules is more disordered and dynamic than the previous one, its structure is still influenced by the gypsum surface underneath because it has a much reduced amount of free OH groups with respect to the free surface of water, and a slower surface diffusion with respect to bulk water. The theoretical results corroborate the experimental ones and provide an accurate atomic characterization of the surface structure.

Aggregation States of Poly(4-methylpentene-1) at a Solid Interface

A thin film of poly(4-methylpentene-1) (P4MP1) was prepared on a quartz substrate, which was a model system of an interface in filler-reinforced semicrystalline polymer composites. Grazing-incidence wide-angle X-ray diffraction measurements revealed that P4MP1 in the thin film after isothermal crystallization formed a Form I crystal polymorph composed of a tetragonal unit cell with a 72 helix, in which the chain axis was oriented along the direction parallel to the quartz interface. Combining sum-frequency generation vibrational spectroscopy with molecular dynamics simulation enabled us to gain access to the local conformation of P4MP1 chains at the quartz interface and the changes that occurred with isothermal crystallization. Finally, the way in which the initial chain orientation at the substrate interface impacted the crystalline structure in the thin film was discussed. A poly(4-methylpentene-1) (P4MP1) film was prepared on a quartz substrate, which was a model system of interfaces in a filler-reinforced semicrystalline polymer composite. Grazing-incidence wide-angle X-ray diffraction measurements revealed that P4MP1 in the film after the isothermal crystallization formed a Form I crystal polymorph, in which the chain axis was oriented along the direction parallel to the quartz interface. Combining sum-frequency generation vibrational spectroscopy with molecular dynamics simulation enabled us to study the local conformation of P4MP1 chains at the quartz interface and the changes that occurred with isothermal crystallization.

Evolution of Irreversibly Adsorbed Layer Promotes Dewetting of Polystyrene Film on Sapphire

Dewetting of a polymer thin film is directly correlated to the interface with the substrate. We thus combined sum frequency generation (SFG) vibrational spectroscopy and laser scanning confocal microscopy (LSCM) to trace both the interfacial molecular structural and macroscopic morphological evolutions of the polystyrene (PS) thin film on top of the sapphire substrate upon annealing until the dewetting occurred. To reveal the molecular structure of the irreversibly adsorbed layer over the annealing time, a solvent-leaching method was adopted to uncover it from the polymer thin film on the substrate. Experimental results demonstrate the local structural evolution of the irreversibly adsorbed layers, including replacement of adsorption sites (train sequences) from different chains to those from single chains and local structural relaxation of the train sequences, significantly promoted the dewetting. The dewetting of the PS thin film was actually accompanied by such structural evolution of the irreversibly ...

Interfacial charges drive the organization of supported lipid membranes and their interaction with nanoparticles.

In this work, we investigated the interaction of cationic gold nanoparticles (AuNPs) with an anionic solid-supported lipid bilayer (SSLB) prepared via the spontaneous fusion of vesicles of phosphatidylserine (DPPS) and phosphatidylcholine (DPPC) on SiO2. We combined sum frequency generation (SFG) spectroscopy at the SSLBs interfaces with electrophoretic light scattering at the vesicles/liquid interfaces, and we provided further insight into the formation of organized DPPS-DPPC films on SiO2 and their interaction with NPs. We found that there is a critical threshold of the relative vesicles/substrate interfacial zeta potentials, beyond which the conformational organization of SSLBs failed. Moreover, we also demonstrated that the presence of anionic DPPS lipids in model mixed DPPS-DPPC membranes accelerated the interaction rate with cationic AuNPs.

Combined Sum Frequency Generation and Thin Liquid Film Study of the Specific Effect of Monovalent Cations on the Interfacial Water Structure.

Some salts have been recently shown to decrease the sum frequency generation (SFG) intensity of the hydrogen-bonded water molecules, but a quantitative explanation is still awaited. Here, we report a similar trend for the chloride salts of monovalent cations, that is, LiCl, NaCl, and CsCl, at low concentrations. Specifically, we revealed not only the specific adsorption of cations at the water surface but also the concentration-dependent effect of ions on the SFG response of the interfacial water molecules. Our thin-film pressure balance (TFPB) measurements (stabilized by 10 mM of methyl isobutyl carbinol) enabled the determination of the surface potential that governs the surface electric field affecting interfacial water dipoles. The use of the special alcohol also enabled us to identify a remarkable specific screening effect of cations on the surface potential. We explained the concentration dependency by considering the direct ion-water interactions and water reorientation under the influence of surface electric field as the two main contributors to the overall SFG signal of the hydrogen-bonded water molecules. Although the former was dominant only at the low-concentration range, the effect of the latter intensified with increasing salt concentration, leading to the recovery of the band intensity at medium concentrations. We discussed the likelihood of a correlation between the effect of ions on reorientation dynamics of water molecules and the broad-band intensity drop in the SFG spectra of salt solutions. We proposed a mechanism for the cation-specific effect through the formation of an ionic capacitance at the solution surface. It explains how cations could impart the ion specificity while they are traditionally believed to be repelled from the interfacial region. The electrical potential of this capacitance varies with the charge separation and ion density at the interface. The charge separation being controlled by the polarizability difference between anions and cations was identified using the SFG response of the interfacial water molecules as an indirect probe. The ion density being affected by the absolute polarizability of ions was tracked through the measurement of the surface potentials and Debye-Hückel lengths using the TFPB technique.

Both Inter- and Intramolecular Coupling of O-H Groups Determine the Vibrational Response of the Water/Air Interface.

Vibrational coupling is relevant not only for dissipation of excess energy after chemical reactions but also for elucidating molecular structure and dynamics. It is particularly important for O-H stretch vibrational spectra of water, for which it is known that in bulk both intra- and intermolecular coupling alter the intensity and line shape of the spectra. In contrast with bulk, the unified picture of the inter/intra-molecular coupling of O-H groups at the water-air interface has been lacking. Here, combining sum-frequency generation experiments and simulation for isotopically diluted water and alcohols, we unveil effects of inter- and intramolecular coupling on the vibrational spectra of interfacial water. Our results show that both inter- and intramolecular coupling contribute to the O-H stretch vibrational response of the neat H2O surface, with intramolecular coupling generating a double-peak feature, while the intermolecular coupling induces a significant red shift in the O-H stretch response.

In situ observation of water behavior at the surface and buried interface of a low-k dielectric film.

Water adsorption in porous low-k dielectrics has become a significant challenge for both back-end-of-line integration and reliability. A simple method is proposed here to achieve in situ observation of water structure and water-induced structure changes at the poly(methyl silsesquioxane) (PMSQ) surface and the PMSQ/solid buried interface at the molecular level by combining sum frequency generation (SFG) vibrational spectroscopic and Fourier transform infrared (FTIR) spectroscopic studies. First, in situ SFG investigations of water uptake were performed to provide direct evidence that water diffuses predominantly along the PMSQ/solid interface rather than through the bulk. Furthermore, SFG experiments were conducted at the PMSQ/water interface to simulate water behavior at the pore inner surfaces for porous low-k materials. Water molecules were found to form strong hydrogen bonds at the PMSQ surface, while weak hydrogen bonding was observed in the bulk. However, both strongly and weakly hydrogen bonded water components were detected at the PMSQ/SiO2 buried interface. This suggests that the water structures at PMSQ/solid buried interfaces are also affected by the nature of solid substrate. Moreover, the orientation of the Si-CH3 groups at the buried interface was permanently changed by water adsorption, which might due to low flexibility of Si-CH3 groups at the buried interface. In brief, this study provides direct evidence that water molecules tend to strongly bond (chemisorbed) with low-k dielectric at pore inner surfaces and at the low-k/solid interface of porous low-k dielectrics. Therefore, water components at the surfaces, rather than the bulk, are likely more responsible for chemisorbed water related degradation of the interconnection layer. Although the method developed here was based on a model system study, we believe it should be applicable to a wide variety of low-k materials.

Interaction of Polyethylenimine with Model Cell Membranes Studied by Linear and Nonlinear Spectroscopic Techniques

Polyethylenimine (PEI) has been widely used as a transfection agent for gene delivery, but it is cytotoxic and can lead to cell apoptosis. Although several apoptotic mechanisms have been proposed, a molecular level understanding of PEI/cell membrane interaction can help develop further insight into such cytotoxicity. We combined sum frequency generation (SFG) vibrational spectroscopy and attenuated total-internal reflection Fourier transform infrared (ATR-FTIR) spectroscopy to study the effect of PEI on lipid transbilayer movement in supported bilayers (serving as model cell membranes) as a function of lipid composition, PEI concentration, and temperature. For both dipalmitoylphosphatidylglycerol (DPPG) and distearoylphosphatidylcholine (DSPC) bilayers, PEI molecules showed no significant effect on lipid translocation at room temperature (21 °C). In contrast, significant lipid translocation was observed near the physiological temperature (39 °C), indicating the ability of PEI to induce lipid translocation...

Unveiling the membrane-binding properties of N-terminal and C-terminal regions of G protein-coupled receptor kinase 5 by combined optical spectroscopies.

G protein-coupled receptor kinase 5 (GRK5) is thought to associate with membranes in part via N- and C-terminal segments that are typically disordered in available high-resolution crystal structures. Herein we investigate the interactions of these regions with model cell membrane using combined sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance–Fourier transform infrared (ATR-FTIR) spectroscopy. It was found that both regions associate with POPC lipid bilayers but adopt different structures when doing so: GRK5 residues 2–31 (GRK52–31) was in random coil whereas GRK5546–565 was partially helical. When the subphase for the GRK52–31 peptide was changed to 40% TFE/60% 10 mM phosphate pH 7.4 buffer, a large change in the SFG amide I signal indicated that GRK52–31 became partially helical. By inspecting the membrane behavior of two different segments of GRK52–31, namely, GRK52–24 and GRK525–31, we found that residues 25–31 are responsible for membrane binding, whereas the helical character is imparted by residues 2–24. With SFG, we deduced that the orientation angle of the helical segment of GRK52–31 is 46 ± 1° relative to the surface normal in 40% TFE/60% 10 mM phosphate pH = 7.4 buffer but increases to 78 ± 11° with higher ionic strength. We also investigated the effect of PIP2 in the model membrane and concluded that the POPC:PIP2 (9:1) lipid bilayer did not change the behavior of either peptide compared to a pure POPC lipid bilayer. With ATR-FTIR, we also found that Ca2+·calmodulin is able to extract both peptides from the POPC lipid bilayer, consistent with the role of this protein in disrupting GRK5 interactions with the plasma membrane in cells.

Unveiling the Membrane-Binding Properties of N-Terminal and C-Terminal Regions of G Protein-Coupled Receptor Kinase 5 by Combined Optical Spectroscopies

G protein-coupled receptor kinase 5 (GRK5) is thought to associate with membranes in part via N and C-terminal segments that are typically disordered based on available high resolution crystal structures. Herein we investigate molecular interactions of these regions with model cell membrane using combined sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance (ATR)-FTIR spectroscopy. It was found that both regions associate with POPC lipid bilayers but adopt different conformations: GRK5-2-31 was in random coil while GRK5-546-565 was partially helical. When the subphase for the GRK5-2-31 peptide was changed to 40% TFE/60% 10 mM phosphate pH=7.4 buffer, a large change in the SFG amide I signal indicated that GRK5-2-31 became partially helical. By inspecting the membrane behavior of two different segments of GRK5-2-31, namely, GRK5-2-24 and GRK5-25-31, we found that residues 25-31 are responsible for membrane binding, whereas the helical character is imparted by residues 2-24. With SFG, we deduced that the orientation angle of the helical segment of GRK5-2-31 is 46±1° relative to the surface normal in 40% TFE/60% 10 mM phosphate pH=7.4 buffer and 78±11° in 40% TFE/60% pH=7.4 PBS buffer. We also investigated the effect of PIP2 in the model membrane and concluded that the POPC:PIP2 (9:1) lipid bilayer did not change the behavior of either peptide compared to a pure POPC lipid bilayer. With ATR-FTIR, we also found that Ca2+•calmodulin is able to extract both peptides from the POPC lipid bilayer, consistent with the role of this protein in disrupting GRK5 interactions with the plasma membrane in cells.

Membrane Orientation and Binding Determinants of G Protein-Coupled Receptor Kinase 5 as Assessed by Combined Vibrational Spectroscopic Studies

G-protein coupled receptors (GPCRs) are integral membrane proteins involved in a wide variety of biological processes in eukaryotic cells, and are targeted by a large fraction of marketed drugs. GPCR kinases (GRKs) play important roles in feedback regulation of GPCRs, such as of β-adrenergic receptors in the heart, where GRK2 and GRK5 are the major isoforms expressed. Membrane targeting is essential for GRK function in cells. Whereas GRK2 is recruited to the membrane by heterotrimeric Gβγ subunits, the mechanism of membrane binding by GRK5 is not fully understood. It has been proposed that GRK5 is constitutively associated with membranes through elements located at its N-terminus, its C-terminus, or both. The membrane orientation of GRK5 is also a matter of speculation. In this work, we combined sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) to help determine the membrane orientation of GRK5 and a C-terminally truncated mutant (GRK51-531) on membrane lipid bilayers. It was found that GRK5 and GRK51-531 adopt a similar orientation on model cell membranes in the presence of PIP2 that is similar to that predicted for GRK2 in prior studies. Mutation of the N-terminal membrane binding site of GRK5 did not eliminate membrane binding, but prevented observation of this discrete orientation. The C-terminus of GRK5 does not have substantial impact on either membrane binding or orientation in this model system. Thus, the C-terminus of GRK5 may drive membrane binding in cells via interactions with other proteins at the plasma membrane or bind in an unstructured manner to negatively charged membranes.

Sum Frequency Generation and Coherent Anti-Stokes Raman Spectroscopic Studies on Plasma-Treated Plasticized Polyvinyl Chloride Films

Polyvinyl chloride (PVC) is a widely used polymer to which various phthalates are extensively applied as plasticizers. PVC materials are often treated with plasma to vary the hydrophobicity or for cleaning purposes, but little is known of the nature of the surface molecular structures after treatment. This research characterizes molecular surface structures of PVC and bis-2-ethylhexyl phthalate (DEHP)-plasticized PVC films in air before annealing, after annealing, and after exposure to air-generated glow discharge plasma using sum frequency generation (SFG) vibrational spectroscopy. In addition, we compare the vibrational molecular signatures on the surfaces of PVC with DEHP (at a variety of percent loadings) to those of the bulk detected using coherent anti-Stokes Raman scattering (CARS). X-ray photoelectron spectroscopy (XPS) and contact angle measurements have been used to analyze PVC surfaces to supplement SFG data. Our results indicate that DEHP was found on the surfaces of PVC films even at low weight percentages (5 wt %) and that DEHP segregates on surfaces after annealing. The treatment of these films with glow discharge plasma resulted in surface-sensitive reactions involving the removal of chlorine atoms, the addition of oxygen atoms, and C-H bond rearrangement. CARS data demonstrate that the bulk of our films remained undisturbed during the plasma treatment. For the first time, we probed the molecular structure of the surface and the bulk of a PVC material using combined SFG and CARS studies on the same sample in exactly the same environment. In addition, the methodology used in this research can be applied to characterize various plasticizers in a wide variety of polymer systems to understand their surface and bulk structures before and after systematic applications of heat, plasma, or other treatments.

Molecular interactions between cell penetrating peptide Pep-1 and model cell membranes.

We investigated the molecular interactions of a cell penetrating peptide (CPP) Pep-1 with model cell membranes using sum frequency generation (SFG) vibrational spectroscopy, supplemented by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Hydrogenated and deuterated 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG and dDPPG) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (POPG) were used in the experiments to represent gel-phase and fluid-phase lipid bilayers, respectively. Our SFG results indicated that Pep-1 molecules adopted a β-sheet conformation when adsorbed to the surface of gel-phase DPPG lipid bilayers. When interacting with fluid-phase POPG lipid bilayers, Pep-1 adopted a mix of α-helical and β-sheet structures over a broad range of peptide concentrations. The orientation distribution of the α-helical Pep-1 segment associated with the fluid-phase bilayers was found to depend on the peptide concentration. SFG orientation analysis showed that Pep-1 molecules adopted an orientation nearly perpendicular to the plane of the bilayer for peptide concentrations of 0.28 and 1.4 μM. When the Pep-1 concentration was increased to 7.0 μM, combined SFG and ATR-FTIR measurements showed that Pep-1 molecules were associated with the bilayer with a broad orientation distribution. Our results demonstrated that lipid bilayer phase and peptide concentration affect the conformation and orientation of Pep-1 molecules associated with model cell membranes, which is crucial to the translocation process of CPPs. A combination of SFG and ATR-FTIR studies can be used to determine the conformation and orientation of CPPs interacting with model cell membranes in situ.

Examining surface and bulk structures using combined nonlinear vibrational spectroscopies

We combined sum-frequency generation (SFG) vibrational spectroscopy with coherent anti-Stokes Raman scattering (CARS) spectroscopy in one system to examine both surface and bulk structures of materials with the same geometry and without the need to move the sample. Poly(methyl methacrylate) (PMMA) and polystyrene (PS) thin films were tested before and after plasma treatment. The sensitivities of SFG and CARS were tested by varying polymer film thickness and using a lipid monolayer.

Sum frequency generation and solid-state NMR study of the structure, orientation, and dynamics of polystyrene-adsorbed peptides

The power of combining sum frequency generation (SFG) vibrational spectroscopy and solid-state nuclear magnetic resonance (ssNMR) spectroscopy to quantify, with site specificity and atomic resolution, the orientation and dynamics of side chains in synthetic model peptides adsorbed onto polystyrene (PS) surfaces is demonstrated in this study. Although isotopic labeling has long been used in ssNMR studies to site-specifically probe the structure and dynamics of biomolecules, the potential of SFG to probe side chain orientation in isotopically labeled surface-adsorbed peptides and proteins remains largely unexplored. The 14 amino acid leucine-lysine peptide studied in this work is known to form an alpha-helical secondary structure at liquid-solid interfaces. Selective, individual deuteration of the isopropyl group in each leucine residue was used to probe the orientation and dynamics of each individual leucine side chain of LKalpha14 adsorbed onto PS. The selective isotopic labeling methods allowed SFG analysis to determine the orientations of individual side chains in adsorbed peptides. Side chain dynamics were obtained by fitting the deuterium ssNMR line shape to specific motional models. Through the combined use of SFG and ssNMR, the dynamic trends observed for individual side chains by ssNMR have been correlated with side chain orientation relative to the PS surface as determined by SFG. This combination provides a more complete and quantitative picture of the structure, orientation, and dynamics of these surface-adsorbed peptides than could be obtained if either technique were used separately.

Unusual Hydrogen Effect in Olefin Dehydrogenation: 1-Methylcyclohexene Dehydrogenation Initiated by Excess Hydrogen over Pt(111) Surfaces, a Combined Sum Frequency Generation Spectroscopy and Kinetic Study

Dehydrogenation and hydrogenation of 1-methylcyclohexene (C7H12) at 1.5 Torr on Pt(111) in the presence and absence of excess hydrogen were studied using gas chromatography and sum frequency genera...

Ultrahigh vacuum and high-pressure coadsorption of CO and H2 on Pd(111): A combined SFG, TDS, and LEED study

Sum frequency generation (SFG) vibrational spectroscopy was carried out in conjunction with thermal desorption spectroscopy, low-energy electron diffraction, and Auger electron spectroscopy to examine the coadsorption of CO and H2 on Pd(111). Sequential dosing as well as various CO/H2 mixtures was utilized to study intermolecular interactions between CO and H2. Preadsorbed CO effectively prevented the dissociative adsorption of hydrogen for CO coverages ⩾0.33 ML. While preadsorbed hydrogen was able to hinder CO adsorption at low temperature (100 K), hydrogen was replaced from the surface by CO at 150 K. When 1:1 mixtures of CO/H2 were used at 100 K, hydrogen selectively hindered CO adsorption on on-top sites, while above ∼125 K no blocking of CO adsorption was observed. The observations are explained in terms of mutual site blocking, of a CO–H phase separation, and of a CO-assisted hydrogen dissolution in the Pd bulk. The temperature-dependent site blocking effect of hydrogen is attributed to the ability (inability) of surface hydrogen to diffuse into the Pd bulk above (below) ∼125 K. Nonlinear optical SFG spectroscopy allowed us to study these effects not only in ultrahigh vacuum but also in a high-pressure environment. Using an SFG-compatible ultrahigh vacuum-high-pressure cell, spectra of 1:10 CO/H2 mixtures were acquired up to 55 mbar and 550 K, with simultaneous gas chromatographic and mass spectrometric gas phase analysis. Under reaction conditions, CO coverages ⩾0.5 ML were observed which strongly limit H2 adsorption and thus may be partly responsible for the low CO hydrogenation rate. The high-pressure and high-temperature SFG spectra also showed indications of a reversible surface roughening or a highly dynamic (not perfectly ordered) CO adsorbate phase. Implications of the observed adsorbate structures on catalytic CO hydrogenation on supported Pd nanoparticles are discussed.