Combined Photoemission Spectroscopy Research Articles

Electronic correlations in epitaxial CrN thin film

Chromium nitride (CrN) spurred enormous interest due to its coupled magnetostructural and unique metal-insulator transition. The underneath electronic structure of CrN remains elusive. Herein, the electronic structure of epitaxial CrN thin film has been explored by employing resonant photoemission spectroscopy (RPES) and X-ray absorption near edge spectroscopy study in combination with the first-principles calculations. The RPES study indicates the presence of a charge-transfer screened 3d ^n{underline{L}} (L: hole in the N-2p) and 3d ^{n-1} final-states in the valence band regime. The combined experimental electronic structure along with the orbital resolved electronic density of states from the first-principles calculations reveals the presence of Cr(3d)-N(2p) hybridized (3d ^n{underline{L}}) states between lower Hubbard (3d ^{n-1}) and upper Hubbard (3d ^{n+1}) bands with onsite Coulomb repulsion energy (U) and charge-transfer energy (Delta) estimated as approx 4.5 and 3.6 eV, respectively. It verifies the participation of ligand (N-2p) states in low energy charge fluctuations and provides concrete evidence for the charge-transfer (Delta<U) insulating nature of CrN thin film.

Observation of flat band, Dirac nodal lines and topological surface states in Kagome superconductor CsTi3Bi5

Kagome lattices of various transition metals are versatile platforms for achieving anomalous Hall effects, unconventional charge-density wave orders and quantum spin liquid phenomena due to the strong correlations, spin-orbit coupling and/or magnetic interactions involved in such a lattice. Here, we use laser-based angle-resolved photoemission spectroscopy in combination with density functional theory calculations to investigate the electronic structure of the newly discovered kagome superconductor CsTi3Bi5, which is isostructural to the AV3Sb5 (A = K, Rb or Cs) kagome superconductor family and possesses a two-dimensional kagome network of titanium. We directly observe a striking flat band derived from the local destructive interference of Bloch wave functions within the kagome lattice. In agreement with calculations, we identify type-II and type-III Dirac nodal lines and their momentum distribution in CsTi3Bi5 from the measured electronic structures. In addition, around the Brillouin zone centre, {{mathbb{Z}}}_{2} nontrivial topological surface states are also observed due to band inversion mediated by strong spin-orbit coupling.

Dirac nodal lines and nodal loops in the topological kagome superconductor CsV3Sb5

The intertwining of charge order, superconductivity and band topology has promoted the AV$_3$Sb$_5$ (A=K, Rb, Cs) family of materials to the center of attention in condensed matter physics. Underlying those mysterious macroscopic properties such as giant anomalous Hall conductivity (AHC) and chiral charge density wave is their nontrivial band topology. While there have been numerous experimental and theoretical works investigating the nontrivial band structure and especially the van Hove singularities, the exact topological phase of this family remains to be clarified. In this work, we identify CsV$_3$Sb$_5$ as a Dirac nodal line semimetal based on the observation of multiple Dirac nodal lines and loops close to the Fermi level. Combining photoemission spectroscopy and density functional theory, we identify two groups of Dirac nodal lines along $k_z$ direction and one group of Dirac nodal loops in the A-H-L plane. These nodal loops are located at the Fermi level within the instrumental resolution limit. Importantly, our first-principle analyses indicate that these nodal loops may be a crucial source of the mysterious giant AHC observed. Our results not only provide a clear picture to categorize the band structure topology of this family of materials, but also suggest the dominant role of topological nodal loops in shaping their transport behavior.

Electronic structure of silver chalcogenides investigated by hard x-ray photoemission spectroscopy and density functional theory calculations

We have investigated the electronic structure of silver chalcogenides Ag2X (X = S, Se, Te) and their solid solutions using hard x-ray photoemission spectroscopy in combination with density functional theory calculations using generalized gradient approximation (GGA). By including the corrections for on-site Coulomb interactions (GGA + U), we successfully reproduced the valence band photoemission spectra, which consist mainly of the Ag 4d band, by calculation. The estimated values for U = 4–6 eV are slightly high for Ag 4d electrons but are consistent with those used in previously reported structural studies. On the other hand, the magnitude of the energy gap is virtually independent of U. These results suggest the strong correlation between Ag 4d electrons in Ag2X compounds to have surprisingly little impact on their electron transport properties.

Nonmetal-to-Metal Transition of Magnesia Supported Au Clusters Affects the Ultrafast Dissociation Dynamics of Adsorbed CH3Br Molecules.

The detection of intermediate species and the correlation of their ultrafast dynamics with the morphology and electronic structure of a surface is crucial to fully understand and control heterogeneous photoinduced and photocatalytic reactions. In this work, the ultrafast photodissociation dynamics of CH3Br molecules adsorbed on variable-size Au clusters on MgO/Mo(100) is investigated by monitoring the CH3+ transient evolution using a pump-probe technique in conjunction with surface mass spectrometry. Furthermore, extreme-UV photoemission spectroscopy in combination with theoretical calculations is employed to study the electronic structure of the Au clusters on MgO/Mo(100). Changes in the ultrafast dynamics of the CH3+ fragment are correlated with the electronic structure of Au as it evolves from monomers to small nonmetallic clusters to larger nanoparticles with a metallic character. This work provides a new avenue to a detailed understanding of how surface-photoinduced chemical reactions are influenced by the composition and electronic structure of the surface.

Planar triangular S=3/2 magnet AgCrSe2 : Magnetic frustration, short range correlations, and field-tuned anisotropic cycloidal magnetic order

Single crystals of the hexagonal triangular lattice compound AgCrSe2 have been grown by chemical vapor transport. The crystals have been carefully characterized and studied by magnetic susceptibility, magnetization, specific heat, and thermal expansion. In addition, we used Cr-electron spin resonance and neutron diffraction to probe the Cr 3d3 magnetism microscopically. To obtain the electronic density of states, we employed x-ray absorption and resonant photoemission spectroscopy in combination with density functional theory calculations. Our studies evidence an anisotropic magnetic order below TN=32K. Susceptibility data in small fields of about 1 T reveal an antiferromagnetic (AFM) type of order for H⊥c, whereas for H∥c the data are reminiscent of a field-induced ferromagnetic (FM) structure. At low temperatures and for H⊥c, the field-dependent magnetization and AC susceptibility data evidence a metamagnetic transition at H+=5T, which is absent for H∥c. We assign this to a transition from a planar cycloidal spin structure at low fields to a planar fanlike arrangement above H+. A fully ferromagnetically polarized state is obtained above the saturation field of H⊥S=23.7T at 2 K with a magnetization of Ms=2.8μB/Cr. For H∥c, M(H) monotonically increases and saturates at the same Ms value at H∥S=25.1T at 4.2 K. Above TN, the magnetic susceptibility and specific heat indicate signatures of two dimensional (2D) frustration related to the presence of planar ferromagnetic and antiferromagnetic exchange interactions. We found a pronounced nearly isotropic maximum in both properties at about T*=45K, which is a clear fingerprint of short range correlations and emergent spin fluctuations. Calculations based on a planar 2D Heisenberg model support our experimental findings and suggest a predominant FM exchange among nearest and AFM exchange among third-nearest neighbors. Only a minor contribution might be assigned to the antisymmetric Dzyaloshinskii-Moriya interaction possibly related to the noncentrosymmetric polar space group R3m. Due to these competing interactions, the magnetism in AgCrSe2, in contrast to the oxygen-based delafossites, can be tuned by relatively small, experimentally accessible magnetic fields, allowing us to establish the complete anisotropic magnetic H-T phase diagram in detail.9 MoreReceived 4 August 2021Revised 3 September 2021Accepted 20 September 2021DOI:https://doi.org/10.1103/PhysRevB.104.134410Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Open access publication funded by the Max Planck Society.Published by the American Physical SocietyPhysics Subject Headings (PhySH)Research AreasFrustrated magnetismMagnetic susceptibilityThermal expansionTechniquesElectron spin resonanceNeutron diffractionPhotoemission spectroscopySpecific heat measurementsCondensed Matter & Materials Physics

Operando XPS: A Novel Approach for Probing the Lithium/Electrolyte Interphase Dynamic Evolution.

The coupling protocols combining photoemission spectroscopy and other characterization methods such as electrochemical, electrical, optical, thermal, or magnetic paved the way to considerable progress in the field of materials science. Access to complementary data on the same object is relevant, but in the vast majority of cases, it is carried out sequentially and separately. This raises the complex question of the equivalence of the analyzed surfaces subjected to these different characterizations. In the frame of lithium ion battery technology (LIB), several techniques have been developed to follow in operando condition the reactivity of electro-active materials toward liquid or solid electrolytes. Besides the knowledge of the redox processes obtained using operando protocols, especially at the interfaces, some limitations associated with material sensitivity and/or the characterization techniques are still a breakdown to widen our understanding of the origin of the LIB performance degradation processes. Herein, we propose a new design of an operando cell adapted to perform X-ray photoemission spectroscopy (XPS) at the interface between electrode and electrolyte under electrochemical solicitations. To illustrate its performance, the crucial issues associated with the lithium metal interface have been scrutinized using Li/Li symmetrical cells and two types of ionic liquids, 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C1C6ImTFSI) and 1-hexyl-3-methylimidazolium bis(fluorosulfonyl)imide (C1C6ImFSI) laden with LiTFSI salt. Our original setup allowed us to follow-up the lithium surface reactivity toward these ionic liquid based electrolytes in open circuit voltage condition and under polarization. Beside the gain of time and the matter saving, we highlighted and optimized the blocking issues to perform accurate OXPS measurement for probing the evolution of the chemical structure and the surface potential change at the interface lithium/electrolyte in dynamic mode.

Intermixing Effect on Electronic Structures of TQ1:PC71BM Bulk Heterojunction in Organic Photovoltaics

The interface energetics and intermixing effects of the donor/acceptor bulk heterojunction (BHJ) blends of poly[2,3‐bis‐(3‐octyloxyphenyl) quinoxaline‐5, 8‐dilyl‐alt‐thiophene‐2, 5‐diyl]: [6,6]‐phenyl C71butyric acid methyl ester (TQ1:PC71BM) have been investigated using ultraviolet photoemission spectroscopy (UPS) in combination with the integer charge transfer model. The TQ1:PC71BM represents the useful model system for BHJ organic photovoltaics featuring effective charge generation and transport. It finds out that the positive integer charge state of TQ1 are equal in energy to the negative integer charge state of PC71BM, leading to a negligible potential step at TQ1:PC71BM interface and thus the vacuum level alignment. It is observed that the TQ1 accumulates on the top of TQ1:PC71BM BHJ and UPS spectra as function of various blend ratios suggest that the TQ1 mixes finely with PC71BM with the little work function modification in a wide range. In addition, no significant influence of the long‐range Coulomb interactions or the intermolecular hybridization on the occupied electronic structures is present for the well‐intermixed TQ1:PC71BM BHJs. These findings provide deep insights into the properties of BHJ blends and are beneficial for the performance optimization in organic photovoltaics.

Tuning Contact Barrier Height between Metals and MoS2 Monolayer through Interface Engineering

Creating an electrical contact to 2D semiconductors with low resistance is a challenging task. In this study, by combining photoemission spectroscopy measurements and first‐principles calculations, it has been shown that a significant interfacial reaction occurring between the high work function metal Ni and an MoS2 monolayer leads to a metallic MoS2 monolayer and a high contact barrier height. By introducing an additional MoS2 layer as a buffer layer, both of these effects can be remedied, resulting in the desired semiconducting channel layer and a reduced contact barrier height. Further applying this strategy to the low work function metal Ti interfaced with an MoS2 monolayer, the contact barrier height can be decreased to about 0.29 eV. The results of this study provide an improved understanding of the interfacial interaction between metals and 2D semiconductors. In addition, a technically less demanding way to tune the contact barrier height is demonstrated.

Environmental control of electron–phonon coupling in barium doped graphene

Two-dimensional superconductivity in alkali- and alkaline-Earth-metal doped monolayer graphene has been explained in the framework of electron–phonon coupling (EPC) and experiments yielded superconducting transition temperatures (TC) up to 6 K. In contrast to bulk graphite intercalation compounds, the interface of doped graphene with its environment affects its physical properties. Here we present a novel and well-defined BaC8 interface structure in Ba-doped single-layer graphene on Au and Ge substrates. We use angle-resolved photoemission spectroscopy in combination with ab initio modelling to extract the Eliashberg function and EPC for both substrates. This allows us to quantitatively assess the environmental effects for both Au and Ge substrates on superconductivity in graphene. We show that for semiconducting Ge substrates, the doping level and EPC are higher. Our study highlights that both dopant order and the metallicity of the substrate can be used to control EPC and hence superconductivity.

Rashba splitting in an image potential state investigated by circular dichroism two-photon photoemission spectroscopy

We have explored the band splitting and spin texture of the image potential state (IPS) on Au(001) derived from the Rashba-type spin-orbit interaction (SOI) by using angle-resolved bichromatic two-photon photoemission (2PPE) spectroscopy in combination with circular dichroism (CD). The Rashba parameter for the first $(n=1)$ IPS is determined to be ${48}_{\ensuremath{-}20}^{+8}\phantom{\rule{4pt}{0ex}}\mathrm{meV}\phantom{\rule{0.16em}{0ex}}\AA{}$, which is consistent with the spin-polarized band structure calculated from the embedded Green's function technique for semi-infinite crystals. The present results demonstrate that bichromatic CD-2PPE spectroscopy is powerful for mapping the spin-polarized unoccupied band structures originating from SOIs in various classes of condensed matter.

Combined Photoemission Spectroscopy and Electrochemical Study of a Mixture of (Oxy)carbides as Potential Innovative Supports and Electrocatalysts.

Active and stable non-noble metal materials, able to substitute Pt as catalyst or to reduce the Pt amount, are vitally important for the extended commercialization of energy conversion technologies, such as fuel cells and electrolyzers. Here, we report a fundamental study of nonstoichiometric tungsten carbide (WxC) and its interaction with titanium oxycarbide (TiOxCy) under electrochemical working conditions. In particular, the electrochemical activity and stability of the WxC/TiOxCy system toward the ethanol electrooxidation reaction (EOR) and hydrogen evolution reaction (HER) are investigated. The chemical changes caused by the applied potential are established by combining photoemission spectroscopy and electrochemistry. WxC is not active toward the ethanol electrooxidation reaction at room temperature but it is highly stable under these conditions thanks to the formation of a passive thin film on the surface, consisting mainly of WO2 and W2O5, which prevents the full oxidation of WxC. In addition, WxC is able to adsorb ethanol, forming ethoxy groups on the surface, which constitutes the first step for the ethanol oxidation. The interaction between WxC and TiOxCy plays an important role in the electrochemical stability of WxC since specific orientations of the substrate are able to stabilize WxC and prevent its corrosion. The beneficial interaction with the substrate and the specific surface chemistry makes tungsten carbide a good electrocatalyst support or cocatalyst for direct ethanol fuel cells. However, WxC is active toward the HER and chemically stable under hydrogen reduction conditions, since no changes in the chemical composition or dissolution of the film are observed. This makes tungsten carbide a good candidate as electrocatalyst support or cocatalyst for the electrochemical production of hydrogen.

Atomically Dispersed Pd, Ni, and Pt Species in Ceria-Based Catalysts: Principal Differences in Stability and Reactivity

We have investigated the stability and the reactivity of atomically dispersed Pt, Pd, and Ni species on nanostructured CeO2 films by means of synchrotron radiation photoelectron spectroscopy and resonant photoemission spectroscopy in combination with density functional calculations. All three metals reveal specific similarities associated with the high adsorption energy of atomically dispersed Pt2+, Pd2+, and Ni2+ species that exceeds the corresponding cohesive energies of the bulk metals. The corresponding Pt–CeO2, Pd–CeO2, and Ni–CeO2 model catalysts have been prepared in the form of thin films on CeO2(111)/Cu(111) substrates and investigated experimentally under ultrahigh vacuum conditions. The atomically dispersed Pt2+, Pd2+, and Ni2+ species were formed exclusively at low concentrations of the corresponding metals. High concentrations resulted in the presence of additional metal oxide phases and emergence of metallic particles. We found that under the employed experimental conditions the Pd–CeO2 films closely resemble the Pt–CeO2 system with respect to the redox behavior upon reaction with hydrogen. Unlike Pt–CeO2, the Pd–CeO2 system shows a strong tendency to stabilize Pd2+ not only at the surface but also in the ceria bulk. In sharp contrast to both Pt–CeO2 and Pd–CeO2, the Ni–CeO2 system does not exhibit the redox functionality required for hydrogen activation due to the remarkably high stability of Ni2+ species.

Electronic structure of the unoccupied electron energy states in FeSe1−xTex

Abstract Inverse photoemission spectroscopic (IPES) measurements along with LDA based band structure calculations have been used to investigate the unoccupied electronic structure of FeSe1−xTex system. The observed doping and temperature dependent pseudogap in this system is found to be linked to the change in the chalcogen height in their geometric structure. The depletion in spectral weight from the near EF states at low temperature in IPES has been correlated with the enhancement of the 3z2–r2 orbitals in the photoemission spectroscopy (PES). The Coulomb correlation energy U, estimated from the combined PES and IPES spectra, signifies the enhancement in electron correlations in FeSe1−xTex, with doping. The formation of pseudogap in PES and IPES confirms the importance of correlations in the 11 family of Fe superconductors.

Study on the molecular distribution of organic composite films by combining photoemission spectroscopy with argon gas cluster ion beam sputtering

In situ molecular distribution analysis based on photoemission spectroscopy combined with Ar gas cluster ion beam sputtering process.

Direct comparative study on the energy level alignments in unoccupied/occupied states of organic semiconductor/electrode interface by constructing in-situ photoemission spectroscopy and Ar gas cluster ion beam sputtering integrated analysis system

Through the installation of electron gun and photon detector, an in-situ photoemission and damage-free sputtering integrated analysis system is completely constructed. Therefore, this system enables to accurately characterize the energy level alignments including unoccupied/occupied molecular orbital (LUMO/HOMO) levels at interface region of organic semiconductor/electrode according to depth position. Based on Ultraviolet Photoemission Spectroscopy (UPS), Inverse Photoemission Spectroscopy (IPES), and reflective electron energy loss spectroscopy, the occupied/unoccupied state of in-situ deposited Tris[4-(carbazol-9-yl)phenyl]amine (TCTA) organic semiconductors on Au (ELUMO: 2.51 eV and EHOMO: 1.35 eV) and Ti (ELUMO: 2.19 eV and EHOMO: 1.69 eV) electrodes are investigated, and the variation of energy level alignments according to work function of electrode (Au: 4.81 eV and Ti: 4.19 eV) is clearly verified. Subsequently, under the same analysis condition, the unoccupied/occupied states at bulk region of TCTA/Au structures are characterized using different Ar gas cluster ion beam (Ar GCIB) and Ar ion sputtering processes, respectively. While the Ar ion sputtering process critically distorts both occupied and unoccupied states in UPS/IPES spectra, the Ar GCIB sputtering process does not give rise to damage on them. Therefore, we clearly confirm that the in-situ photoemission spectroscopy in combination with Ar GCIB sputtering allows of investigating accurate energy level alignments at bulk/interface region as well as surface region of organic semiconductor/electrode structure.

Tuning the Dirac point position in Bi(2)Se(3)(0001) via surface carbon doping.

Angular resolved photoemission spectroscopy in combination with abinitio calculations show that trace amounts of carbon doping of the Bi_{2}Se_{3} surface allows the controlled shift of the Dirac point within the bulk band gap. In contrast to expectation, no Rashba-split two-dimensional electron gas states appear. This unique electronic modification is related to surface structural modification characterized by an expansion of the top Se-Bi spacing of ≈11% as evidenced by surface x-ray diffraction. Our results provide new ways to tune the surface band structure of topological insulators.

Oscillations of the orbital magnetic moment due to d-band quantum well states.

The effect of electron confinement on the magnetocrystalline anisotropy of ultrathin bcc Fe films is explored by combining photoemission spectroscopy, x-ray magnetic circular dichroism, and magneto-optical Kerr effect measurements. Pronounced thickness-dependent variations in the magnetocrystalline anisotropy are ascribed to periodic changes in the density of states at the Fermi level, induced by quantization of d(xz), d(yz) out-of-plane orbitals. Our results reveal a direct correlation between quantum well states, the orbital magnetic moment, and the magnetocrystalline anisotropy.

Combined Photoemission Spectroscopy and Scanning Tunneling Microscopy Study of the Sequential Dehydrogenation of Hexahydroxytriphenylene on Ag(111)

The structural evolution of 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) single-layer networks on Ag(111) was investigated by scanning tunneling microscopy and core-level photoemission. The molecules adsorbed in flat-lying conformation and formed well-ordered supramolecular domains. Three different phases were observed depending on the substrate temperature during deposition. Core-level photoemission showed that the radical changes in the supramolecular networks corresponded to different degrees of dehydrogenation of the six-fold hydroxyl functional groups borne by the molecule. Remarkably, hydroxyl groups involved in strong H bonding with carbonyl oxygens appeared as distinct components in the O 1s spectra.

Metal oxide induced charge transfer doping and band alignment of graphene electrodes for efficient organic light emitting diodes.

The interface structure of graphene with thermally evaporated metal oxide layers, in particular molybdenum trioxide (MoO3), is studied combining photoemission spectroscopy, sheet resistance measurements and organic light emitting diode (OLED) characterization. Thin (<5 nm) MoO3 layers give rise to an 1.9 eV large interface dipole and a downwards bending of the MoO3 conduction band towards the Fermi level of graphene, leading to a near ideal alignment of the transport levels. The surface charge transfer manifests itself also as strong and stable p-type doping of the graphene layers, with the Fermi level downshifted by 0.25 eV and sheet resistance values consistently below 50 Ω/sq for few-layer graphene films. The combination of stable doping and highly efficient charge extraction/injection allows the demonstration of simplified graphene-based OLED device stacks with efficiencies exceeding those of standard ITO reference devices.