Combined Fixation Research Articles

Comparison of the stability of dual INFIX and INFIX combined with sacroiliac screw fixation for C1 type pelvic fractures

To evaluate the biomechanical stability of dual anterior subcutaneous internal fixation (INFIX) in pelvic C1 fractures by finite element analysis, and to compare it with INFIX combined with sacroiliac screws to determine whether it is sufficient to replace the combined fixation of anterior and posterior rings. The pelvic CT data of a 43-year-old female volunteer were imported into the computer and the normal pelvic model and pelvic C1 fractures model were constructed using Mimics, Workbench and other software. The latter was fixed with dual INFIX and INFIX combined with sacroiliac screws, respectively. First, the effectiveness of the normal pelvic model in anatomical landmarks, stress conduction and displacement distribution was verified. Then, a vertical downward load of 500 N was applied to the two internal fixation models to simulate the standing and sitting positions of the human body, and the displacement of the anterior and posterior ring fractures ends, the stress of the internal fixation and the stress of the nail channel in the bone were collected. The model passed the validity verification. The maximum displacement of the anterior and posterior ring fractures in the standing dual INFIX group were 0.861 mm and 4.128 mm, respectively, which were both smaller than the 0.152 mm and 0.293 mm in the combined fixation group. The displacement of the posterior ring fractures in the sitting dual INFIX group was 3.757 mm, which was larger than the 0.560 mm in the combined fixation group, while the maximum displacement of the anterior ring fractures was 0.221 mm, which was not much different from the 0.194 mm in the combined fixation group. The maximum stress of internal fixation in the standing dual INFIX group was greater than that in the combined fixation group, while the opposite was true in the sitting position. The maximum stress of each internal fixation was lower than the yield strength of titanium alloy 790 MPa. The maximum stress of the nail channel in the standing and sitting daul INFIX groups was lower than that in the combined fixation group, and the stress of all nail channels was lower than the strength limit of bone 290 to 540 MPa. The stability of dual INFIX fixation in anterior and posterior ring fractures is generally inferior to that of INFIX combined with sacroiliac screw fixation. Although simple dual INFIX fixation can share part of the load for the posterior ring, the posterior ring will still have a large displacement, so the fixation of the posterior ring is very important. In addition, the fixation strength and stability of dual INFIX in the anterior ring are better than INFIX. When INFIX cannot provide sufficient strength to stabilize the anterior ring fractures, dual INFIX will be a good choice.

Single versus dual fixation of distal femur fractures: A retrospective cohort study at a level one trauma centre in New Zealand

Background The study compares single versus combination fixation of distal femur fractures. Method We retrospectively reviewed patients over 60 between January 2016 and December 2022. Union rate, ambulatory status and complication rate were primary outcomes. Secondary outcomes included quality of reduction, operative time and rate of blood transfusion. Results A total of 92 patients received single fixation, and 22 patients received combination fixation. There was no difference in rate or time of fracture union. Patients with dual fixation were allowed to weight bear on discharge significantly more than single fixation patients (50% vs. 18.9%, p = 0.003). Intramedullary nail fixation, as a single method or combined with lateral plating, was associated with earlier weight bearing. Immediate post-operative weight bearing significantly increased the likelihood of discharging to home or rehabilitation versus discharging to a transitional care facility ( p < 0.00001). There was no difference in the rate of blood transfusion, complication or mortality. Medial translation of the distal articular block was significantly lower with dual fixation (1.2% vs. 3.4%, p = 0.021). Operation time was longer with combination fixation (183 min vs. 134 min p < 0.001). Conclusion Combination fixation allows earlier weight bearing, at the cost of longer operation time.

Methods and Strategies of Microsurgery Combined with Ilizarov Technique in the Treatment of Amputation of Limbs in Renji Hospital: A Report of 51 Cases.

Severe limb amputation trauma often results in bone and soft tissue defects after debridement. Traditional replantation aims to save the limb by shortening the ischemic period and using autologous transplantation for repair, but it can lead to surgical trauma, donor site damage, and prolonged operation time. Due to contusion, pollution, and complex injury, there is no unified standard for replantation and fixation. Improper operation can easily lead to complications such as bone infection, nonunion, bone defect, and joint stiffness. This study introduces the Ilizarov technique into microsurgery to improve limb lengthening after reconstruction and standardizes the steps of replantation fixation for complex limb avulsion injuries, with a focus on clinical efficacy. A retrospective analysis was performed on 51 patients with complex limb amputation who were treated in Zhengzhou Renji Hospital from June 2009 to March 2021. On the basis of microsurgical limb replantation, Ilizarov technology was introduced to innovate the internal and external combined stepwise fixation method for replantation. Patients' gender, age, height, weight, BMI, and other general information were collected. X-ray films were reviewed regularly to observe the surgical healing of fracture, that is, the degree of limb shortening. The lengthening time, carrying time after lengthening, follow-up time, Dahl classification, Paley fracture healing classification, and Chen Zhongwei's replantation function score were used to evaluate the recovery of the affected limb. A total of 51 patients were included in this group, including 36 male patients and 15 female patients. All the amputated wounds were single limb amputation. In this group of patients, the hind limbs were shortened by 2-12.5 cm (5.32 ± 2.24) after replantation. A total of 44 patients whose hind limbs were shortened by more than 2.5 cm were treated with two-stage Ilizarov lengthening for 1.5-5.5 months (3.19 ± 1.03). The carrying time was 3-7.5 months (4.25 ± 0.94), and the follow-up time was 1-7.8 years (3.76 ± 1.69). Among the 49 survived patients, the Dahl grade of external fixation was less than Grade 2 in 89.8%. The excellent and good rate of Paley fracture healing classification was 89.8%. The excellent and good rate of Chen Zhongwei's limb replantation function classification was 79.6%. Microsurgery combined with Ilizarov technique in the treatment of limb amputation injury, limb salvage reconstruction with internal and external combined step-by-step combined fixation, and one-stage shortening and two-stage limb lengthening can reduce the occurrence of osteomyelitis, bone defect and nonunion, expand the indications of limb replantation, improve the success rate of limb replantation, with satisfactory results, and facilitate the promotion of clinical techniques.

An unusual Ogden type V tibial tubercle avulsion fracture: a case report and literature review

BackgroundOgden type V tibial tubercle avulsion fracture is an unusual type of physial injury. Thus, little is known about its mechanism of injury and treatment. The type of osteosynthesis is variable and depends on the experience of the surgeon. We commonly used cancellous screws fixation combined with tension band wiring for displaced fracture of the anterior tibial tuberosity.Case presentationThe present manuscript describes a case of a Han nationality 13-year-old boy who presented with severe pain of the left knee, which began after landing following a high jump. He had no significant past medical history apart from a high body mass index of 30.3. Radiographs revealed that he had an unusual Ogden type V tibial tubercle avulsion fracture. He was treated by open reduction and combined fixation with cannulated screws and tension-band wiring. After 3 months, the fracture healed without any complications or knee symptoms with full range of motion. He underwent reoperation for symptomatic hardware, which was removed at 5 months after initial surgery, and returned to his prior level of sporting activity at 1 year follow-up.ConclusionOur case suggests that excellent functional outcome could be achievable by open reduction with the combination of internal fixation and tension-band wiring for Ogden type V tibial tubercle avulsion fracture. This type of osteosynthesis could not only achieve anatomical reduction and stable fixation for such fractures, but also avoid further damage to the proximal tibial epiphysis, which prevents serious complications, such difference in leg length.

Classification of ossicular fixation based on a computational simulation of ossicular mobility

Ossicular fixation disturbs the mobility of the ossicular chain and causes conductive hearing loss. To diagnose the lesion area, otologists typically assess ossicular mobility through intraoperative palpation. Quantification of ossicular mobility and evidence-based diagnostic criteria are necessary for accurate assessment of each pathology, because diagnosis via palpation can rely on the surgeons’ experiences and skills. In this study, ossicular mobilities were simulated in 92 pathological cases of ossicular fixation as compliances using a finite-element (FE) model of the human middle ear. The validity of the ossicular mobilities obtained from the FE model was verified by comparison with measurements of ossicular mobilities in cadavers using our newly developed intraoperative ossicular mobility measurement system. The fixation-induced changes in hearing were validated by comparison with changes in the stapedial velocities obtained from the FE model with measurements reported in patients and in temporal bones. The 92 cases were classified into four groups by conducting a cluster analysis based on the simulated ossicular compliances. Most importantly, the cases of combined fixation of the malleus and/or the incus with otosclerosis were classified into two different surgical procedure groups by degree of fixation, i.e., malleo-stapedotomy and stapedotomy. These results suggest that pathological characteristics can be detected using quantitatively measured ossicular compliances followed by cluster analysis, and therefore, an effective diagnosis of ossicular fixation is achievable.

A stain with all the fixing’s – Enhancement of fingermarks in blood using a combined fixative and aqueous protein stain

The use of protein stains to enhance fingermark ridge detail in blood is a common technique used by forensic practitioners around the world. Amido Black is one of the most favoured protein stains due to its strong staining ability. The most common formulation of Amido Black is methanol based, with an ability to simultaneously fix and stain the blood impression, however methanol is toxic and can disrupt some surfaces, potentially compromising fingermark detail. If the surface is suspected of being a material that is impacted by methanol, there is an alternative aqueous formulation, which requires a fixative step to set the blood prior to staining so as not to wash away potential ridge detail. The multi-step process of aqueous protein stains is tedious and numerous studies have been conducted to improve the formula to achieve a combined fixing/staining solution that performs like the methanolic reagent. A combined fixative and stain formulation of aqueous based Amido Black was compared to a multi-step formulation with a separate sulfosalicylic acid fixative. Of the 243 split fingermark impressions analysed the majority (63.5 %) showed no preference to either treatment, with a marginally greater proportion of the remaining marks slightly favouring the combined fixative and stain formulation. Given that the new combined formulation performed broadly similarly to the existing multi step formulation, the potential time savings of this simpler approach may be beneficial to implement into operational use.

OUTCOMES OF DISTAL FEMUR FRACTURE IN THE ELDERLY TREATED WITH EITHER SINGLE PLATE OR DUAL PLATING OR NAIL-PLATE COMBINATION: A RETROSPECTIVE ANALYSIS FROM A SINGLE CENTRE

IntroductionDistal femur fracture fixation in elderly presents significant challenges due to osteoporosis and associated comorbidities. There has been an evolution in the management of these fractures with a description of various surgical techniques and fixation methods; however, currently, there is no consensus on the standard of care. Non-union rates of up to 19% and mortality rates of up to 26 % at one year have been reported in the literature. Delay in surgery and delay in mobilisation post-operatively have been identified as two main factors for high rate of mortality. As biomechanical studies have proved better stability with dual plating or nail-plate combination, a trend has been shifting for past few years towards rigid fixation to allow early mobilisation. Our study aims to compare outcomes of distal femur fractures managed with either single plate (SP), dual plating (DP) or nail-plate construct (NP).MethodsA retrospective review of patients aged above 65 years with distal femur fractures (both native and peri-prosthetic) who underwent surgical management between June 2020 and May 2023 was conducted. Patients were divided into three groups based on mode of fixation - single plate or dual plating or nail-plate construct. AO/OTA classification was used for non-periprosthetic, and Unified classification system (UCS) was used for periprosthetic fractures. Data on patient demographics, fracture characteristics, surgical details, postoperative complications, re-operation rate, radiological outcomes and mortality rate were evaluated. Primary objective was to compare re-operation rate and mortality rate between 3 groups at 30 days, 6 months and at 1 year.ResultsA cohort of 32 patients with distal femur fractures were included in this study. 91% were females and mean age was 80.97 (range 68–97). 18 (53%) were non-periprosthetic fracture and 14 (47%) were periprosthetic fractures.18 patients underwent single plate fixation (AO/OTA 33A – 8, 33B/C – 2, UCS V3B – 5, V3C – 3),10 patients had dual plate fixation (AO/OTA 33A – 1, 33B/C – 4, UCS V3B – 3, V3C – 2) and 4 patients underwent nail-plate combination fixation (AO/OTA 33A – 4). 70.5% patients had surgery within 36 hours of admission and 90% within 48 hours. Analysis showed no re-operation at 30 days, 6 months in all 3 groups. At 1 year one patient had re-operation in dual-plating periprosthetic group (Distal femur replacement done for failed fixation). Three patients (16%) in single plate group had re-operation at 2 years (2 for peri-implant fracture and 1 for infection). None of the patients treated with Nail-plate combination had re-operation. Mortality rate at 30 days was 0% in among all the 3 groups. At 6 months, it was 16% in single plate group and 0% in DP and NP groups at 6 months and at 1 year mortality rate was 27% in SP group, 10% in DP and 0% in NP group. Combined mortality rate was 0% at 30 days, 9% at 6 months and 18.7% at one year.ConclusionOur analysis provides insights into fixation methods of distal femur fractures in elderly patients. We conclude that a lower re-operation rate and mortality rate can be achieved with early surgery and rigid fixation with either dual plating or nail-plate construct to allow early mobilisation. Further prospective studies are warranted to confirm these findings and guide the selection of optimal surgical strategies for these challenging fractures.

CLINICAL, RADIOLOGICAL, AND PATIENT-REPORTED OUTCOMES OF CHARCOT FOOT RECONSTRUCTIVE SURGERY IN A SINGLE CENTRE OVER A FOLLOW-UP PERIOD OF ONE TO SEVEN YEARS

IntroductionSurgical reconstruction of Charcot joint deformity is increasingly being offered to patients. In our centre a hybrid type fixation technique is utilised: internal and external fixation. This combined fixation has better wound management and earlier mobilisation in this deconditioned patient group. The aim of this study was to assess clinical, radiological and patient reported outcomes for all patients who underwent this hybrid technique.MethodsThis is a prospective observational case series of all patients who underwent surgical reconstruction of Charcot foot deformity in a single centre between June 2017 and June 2023. Patient demographics, smoking status, diabetic control and BMI were recorded. Outcomes were determined from case notes and included clinical outcomes (complications, return to theatre, amputation and mortality) radiological outcomes and patient reported outcomes. The follow up period was 1–7 years post operatively.Results42 reconstructions were included. At the time of surgery the mean age was 59.1 years (29 – 91 years), average HbA1c was 65.2 (33–103); this did not correlate with return to theatre rate. 4 procedures were internal fixation alone (9.5%), 3 external fixation alone (7.1%) and 35 were combined fixation (83.3%). At most recent follow up 7 patients were deceased (16.7%), 2 patients had ipsilateral amputations, 2 had contralateral amputations. 11 patients had issues with recurrent ulcerations. Excluding refreshing of frames and operations on the contralateral side, 17 patients (40%) returned to theatre. We aim to present a detailed analysis of the rate of post-operative complications, return to theatre, radiographic outcomes and patient reported outcomes.ConclusionThis is the largest UK based case series of hybrid type Charcot joint reconstructions and shows that hybrid fixation is a viable option for patients undergoing Charcot joint reconstruction. To best confirm findings and determine which patients have the best post-operative prognosis a larger multi-centre study is required.

Clinical differences between periprosthetic and native distal femur fractures: a comparative observational study

IntroductionThe incidence of periprosthetic distal femur fractures (PDFF) is increasing as the number of total knee replacements becomes more common. This study compared the demographics, fracture characteristics, treatment, and outcomes of periprosthetic versus native distal femur fractures (NDFF).Materials and methodsThis was a retrospective cohort study of patients ≥ 18 who underwent surgical fixation of NDFF or PDFF from 2012 to 2020 at a level-1 trauma center. The main variables collected included demographics, AO/OTA fracture classification, fixation construct, concomitant fractures, polytrauma rates, bone density, and reduction quality. Primary outcomes were unexpected return to the operating room (UROR), hospital length of stay, and quality of reduction. T-tests, Fisher’s exact tests, and multivariate analyses were used for statistical analysis.Results209 patients were identified, including 70 PDFF and 139 NDFF. PDFF patients were elderly females (81%) with isolated (80%) and comminuted (85%) 33 A.3 (71%) fractures. NDFF patients included 53% females, were commonly middle-aged, and displayed comminuted (92%) 33 C.2 fractures. 48% of NDFF patients had concomitant fractures. Intramedullary nailing was the primary fixation for both groups, followed by nail-plate combination (37%) for PDFF and lateral locking plates (21%) for NDFF. NDFF patients experienced significantly longer hospital stays, higher UROR rates, and worse quality of reduction (p < 0.05). PDFF patients had a significantly greater prevalence of low bone density (p < 0.05).ConclusionPDFF occur as isolated injuries with significant metaphyseal comminution in elderly females with low bone quality. NDFF commonly occurs in younger patients with less metaphyseal comminution and concomitant fractures. Intramedullary nailing was the most common treatment for both groups, although preference for nail-plate combination fixation is increasing. NDFF type 33 C fractures are at greater risk of UROR.

Combined Medial Quadriceps Tendon-Femoral Ligament and Medial Patellofemoral Ligament Reconstruction for Revision Patellofemoral Soft-Tissue Stabilization

Patients with recurrent patellofemoral instability in whom prior medial patellofemoral ligament (MPFL) reconstruction fails present unique challenges for revision soft-tissue stabilization owing to scar tissue formation, limited patellar bone stock for anchor placement, and increased risk of patellar fracture. We describe a technique for revision patellofemoral soft-tissue stabilization that combines MPFL and medial quadriceps tendon–femoral ligament reconstruction techniques through combined fixation to the patella with 1 suture anchor and soft-tissue fixation to the quadriceps tendon. The proposed technique maximizes restoration of resistance to lateral translation by attempting to re-create the native MPFL attachment and minimizes patellar fracture risk in the setting of poor bone stock through the use of a single 1.8-mm all-suture suture anchor rather than bone tunnels or multiple anchor placement for bony fixation.

OUTCOMES OF SINGLE VERSUS COMBINATION FIXATION IN DISTAL FEMUR FRACTURES: A CHRISTCHURCH EXPERIENCE

IntroductionDistal femur fractures have traditionally been stabilized with either lateral locking plate or retrograde intramedullary nail. Dual-plates and nail-plate combination fixation have the theoretical biomechanical advantage, faster union and allows patients to weight bear immediately.The aim of this study is to compare single vs combination fixation, and evaluate outcomes and complications.MethodWe retrospectively reviewed all patients over 60, admitted to Christchurch Hospital, between 1st Jan 2016 and 31st Dec 2022, with an AO 33A/33B/33C distal femur fracture. Patient demographics, fracture characteristics, operation details, and follow up data were recorded.Primary outcomes are union rate, ambulatory status at discharge, and surgical complications. Secondary outcomes include quality of reduction, operation time and rate of blood transfusions.Results114 patients were included. (92 single fixation, 22 combination fixation).Baseline demographic data and fracture characteristics did not differ between the cohorts.There was no difference in the rate of union or time to union between the two cohorts. Combination fixation patients were allowed to weight-bear as tolerated significantly more than single fixation patients (50% vs 18.9%, p=0.003). There was no difference in length of hospital stay, transfusion, complication and mortality rates.Medial translation of the distal articular block was significantly lower in the combination fixation cohort (1.2% vs 3.4%, p=0.021). Operation time was significantly longer in the combination fixation cohort (183mins vs 134mins, p&lt;0.001).DiscussionThe results show no difference in achieving union or time to union, despite better quality of fracture reduction with dual fixation. This differs to previously published literature. The clear benefit of combination fixation is immediate weight-bearing. As expected, operation times were longer with combination fixation, however this did not translate to more complications.ConclusionCombination fixation allows earlier weight bearing, at the cost of longer operation times.

Finite element analysis of the biomechanical effects of anterior and posterior cervical fusion surgery for bilateral cervical dislocation

Lower cervical spine injuries often manifest as lower cervical vertebral fractures and dislocations, as well as lower cervical facet joint dislocations. Especially in cases of bilateral facet joint dislocations, it is important to rapidly and effectively relieve spinal cord and nerve root compression to prevent secondary spinal cord injury, while also providing reliable and long-lasting stability to the injured segment after surgery. Combined anterior and posterior approaches have the advantages of both pure anterior or posterior approaches, but the actual situation is complex and variable, making systematic theoretical analysis crucial. This study, with bilateral facet joint dislocation of the C6 segment and cervical spinal cord injury as the research background, established a three-dimensional model of the cervical spine C3-C7 after implementing four types of anterior-posterior combined surgeries. The four surgical approaches consist of four combinations: anterior parallel or inclined screw placement combined with posterior Margel or Anderson method screw insertion. Through finite element method, a systematic comparative analysis of the theoretical effects of the four combined surgeries in treating bilateral facet joint dislocation of the cervical spine was conducted. The conclusion was that the variations in the four combined fixation methods have a certain impact on the biomechanical characteristics of the intervertebral disc nucleus. There is a clear mutual influence relationship among anterior and posterior fixation instruments. Based on the model used in this study, it is recommended to use a torque greater than 2.1 nm to tighten the locking nut of the posterior rod to ensure reliable internal fixation.

Fitting of Growth Curves and Estimation of Genetic Relationship between Growth Parameters of Qianhua Mutton Merino.

Qianhua Mutton Merino is a dual-purpose (meat and wool) breed of sheep that has been newly developed in China. In this study, we assessed the growth and development of the Qianhua Mutton Merino sheep breed under house feeding conditions by measuring the body weight and chest circumference of 2300 rams and ewes of this breed aged 0-24 months. Based on the fitting results of three nonlinear growth models, namely Logistic, Gompertz, and von Bertalanffy, in Qianhua Mutton Merino, we selected the von Bertalanffy model because of its highest fitting degree among all models (R2 > 0.977). The significant analysis of the combined fixation of each sheep body's weight and bust took place (A: mature body weight, B: adjustment parameter, K: instant relative growth rate). The results revealed that parameters A, B, and K of body weight and chest circumference have high heritability and thus could be used as target traits for genetic improvement. Moreover, the correlation strength among A, B, and K suggested that these parameters can be used as a reference to adjust the genetic parameters in the growth model to genetically improve the body size of Qianhua Mutton Merino during breeding.

Biomechanical analysis of bridge combined fixation system as a novel treatment for the fixation of type A3 distal femoral fractures.

To compare the biomechanical parameters of AO/OTA type A3 distal femoral fractures fixed bilaterally with a bridge combined fixation system (BCFS) and lateral locking compression plate + locking reconstruction plate (LCP + LRP). Twelve A3 distal femoral fracture models with medial cortical defects of the distal femur were created using synthetic femoral Sawbones. BCFS and LCP + LRP were used for bilateral fixation, with six in each group. Axial compression and torsion tests were performed on the two groups of fracture models to determine their stiffness during axial compression and the Torsional stiffness during torsion tests. Axial compression failure tests were performed to collect the vertical loads of the ultimate failure tests. In the test conducted on the fixed type A3 distal femoral fracture models, the axial stiffness in the BCFS group (group A) (1,072.61 ± 113.5 N/mm) was not significantly different from that in the LCP + LRP group (group B) (1,184.13 ± 110.24 N/mm) (t = 1.726, P = 0.115), the Torsional stiffness in group A (3.73 ± 0.12 N.m/deg) was higher than that in group B (3.37 ± 0.04 N.m/deg) (t = 6.825, P < 0.001),and the ultimate failure test of type A3 fracture model showed that the vertical load to destroy group A fixation (5,290.45 ± 109.63 N) was higher than that for group B (3,978.43 ± 17.1 N) (t = 23.28, P < 0.05). Notably, intertrochanteric fractures occurred in groups A and B. In the fixation of type A3 distal femoral fractures, the anti-axial compression of the BCFS group was similar to that of the LCP + LRP group, but the anti-torsion was better.

Comparative radiological analysis of hybrid and circular stabilization methods for the treatment of osteoporotic vertebral burst fractures

Objective. To perform a comparative radiological analysis of the methods of hybrid stabilization (posterior fixation in combination with cement vertebroplasty and osteoplasty with deproteinized allobone) and circular stabilization (posterior fixation in combination with anterior fusion) used in the treatment of uncomplicated burst fractures of the vertebral bodies associated with osteoporosis.Material and Methods. The study is retrospective. Two groups of patients were formed, and inclusion and exclusion criteria were determined. The magnitude of kyphosis correction (according to Cobb), the magnitude of residual postoperative kyphotic deformity, as well as its recurrence in the long-term postoperative period, and the sagittal balance (Barrey index) were assessed. The follow-up period was 12 months. Subjective assessments of the patient’s condition were not considered.Results. The magnitude of initial kyphotic deformity (&gt;20°), incomplete achievement of kyphosis correction after surgery (&gt; 5°), the value of densitometry T-score, and sagittal imbalance before and after surgical intervention are, with a statistically significant difference, the main predictors of local kyphosis recurrence, incomplete correction of deformity and decompensated sagittal imbalance.Conclusions. When comparing the methods of hybrid and circular stabilization, there was no statistical difference in radiological outcomes.

Application of bridge-link type combined fixation system in the treatment of trifocal femoral fractures.

Ipsilateral combined fractures of the proximal femur, femoral shaft, and distal femur, though uncommon, present significant treatment challenges for orthopaedic surgeons. This retrospective study aims to investigate the intraoperative and long-term postoperative outcomes of this combination fracture when treated using a bridge-link type combined fixation system (BCFS). Four individuals received treatment at a level 1 trauma centre between January 2013 and December 2017 for combined fractures of the proximal femur, femoral shaft, and distal femur. The medical records of these patients were retrospectively examined. In addition to minimally invasive percutaneous plate osteosynthesis (MIO), all patients underwent BCFS. The median follow-up period for each patient was 28.5 months. The median duration of the surgical procedure was 176.0 min, with intraoperative haemorrhage measured at 470.0 ml. Among the cases, three patients showed firm union of the femoral shaft fractures. However, one patient experienced nonunion 12 months after the procedure, while another patient suffered from refracture of the femoral shaft and postoperative avascular necrosis of the femoral head. At the time of the last follow-up, the Friedman-Wyman functional scores were excellent in one case, good in two cases, and fair in one case. Trifocal femoral fractures lack a widely approved therapeutic strategy. Nonetheless, BCFS may present itself as a viable alternative for treating this type of fracture, offering positive clinical outcomes.

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression

A new numerical-analytical method for solving physically nonlinear bending problems of thin plates with complex shape made from materials that differently resist to tension and compression is developed. The uninterrupted parameter continuation method is used to formulate and linearize the problem of physically nonlinear bending. For the linearized problem, a functional in the Lagrange form, given on the kinematically possible displacement rates, is constructed. The main unknown problems (displacements, strains, stresses) were found from the solution of the initial problem, which was solved by the Runge-Kutta-Merson method with automatic step selection, by the parameter related to the load. The initial conditions are found from the solution of the problem of linear elastic deformation. The right-hand sides of the differential equations at fixed values of the load parameter corresponding to the Runge-Kutta-Merson scheme are found from the solution of the variational problem for the functional in the Lagrange form. Variational problems are solved using the Ritz method in combination with the R-function method, which allows to submit an approximate solution in the form of a formula – a solution structure that exactly satisfies the boundary conditions and is invariant with respect to the shape of the domain where the approximate solution is sought. The test problem for the nonlinear elastic bending of a square hinged plate is solved. Satisfactory agreement with the three-dimensional solution is obtained. The bending problem of the plate of complex shape with combined fixation conditions is solved. The influence of the geometric shape and fixation conditions on the stress-strain state is studied. It is shown that failure to take into account the different behavior of the material under tensile and compression can lead to significant errors in the calculations of the stress-strain state parameters.

Effect of buttress plate in Herscovici type D vertical medial malleolar fractures and peripheral fractures: a retrospective comparative cohort study

BackgroundThe purpose of current retrospective study was to review the surgical methods and to evaluate the clinical efficacy of supporting plate for the treatment of vertical medial malleolus fractures on the basis of stable fixation of ipsilateral fibula.MethodsThis retrospective study included a total of 191 patients with vertical medial malleolus fractures. Patients enrolled were divided into simple vertical medial malleolus fractures and complex types of fractures. General demographic information and surgical information, including age, sex, surgical procedure and postoperative complications, were collected. The functional prognosis of patients was evaluated by American Orthopedic Foot and Ankle Society Ankle-Hindfoot Score (AOFAS) and Visual Analog Scale (VAS).ResultAmong patients with simple vertical fractures, the respective incidence of internal fixation failure in screw group, buttress plate group, and screw combined buttress plate fixation group (combined fixation group) was 10/61 (16.4%),1/54 (7.4%) and 1 (1.9%), and the difference was statistically significant (P = 0.024). The incidence of abnormal fracture growth and healing in screw group, buttress plate group and combined fixation group was, respectively, 13/61 (21.3%), 6/54 (12.5%) and 2 (3.85%), with statistically significant difference (P = 0.019). In the patients with complex types of fractures, after 2 years of postoperative follow-up, the AOFAS score and VAS score of the following subgroups had good results: 91.18 ± 6.05 and 2.18 ± 1.08 in patients with joint surface collapse, and 92.50 ± 4.80 and 2.50 ± 1.29 in patients with tibial fractures, with 100% excellent and good rate.ConclusionFor simple and complex vertical medial malleolus fractures, buttress plate showed excellent fixation. Despite poor wound healing and extensive soft tissue dissection with this approach, buttress plate may provide a novel insight into medial malleolar fractures, especially for extremely unstable medial malleolar fractures.

Fixation Techniques for Scaphoid Nonunion.

Scaphoid fractures are common injuries with high risk of nonunion. Various fixation techniques exist for managing scaphoid nonunions, including Kirschner wires, single or dual headless compression screws, combination fixation techniques, volar plating, and compressive staple fixation. The indication for each fixation technique varies depending on the patient, type of nonunion, and clinical scenario.

Хирургическое лечение аневризмальных костных кист поясничного отдела позвоночника: описание клинического случая

Introduction Pediatric and adolescent patients with aneurysmal bone cyst of the spine are normally treated by orthopaedic, neuro surgeons and oncologists. There is no consensus on the strategy and volume of preoperative and surgical treatment of the condition. There is a higher risk of pathological fracture and secondary neurological complications, tumor recurrence if open surgery is not performed in time. A second surgical intervention can hardly be avoided in such cases. The objective was to report the result of surgical treatment of a patient with aneurysmal bone cyst of the spine. Material and methods Outcome of a patient with an aneurysmal bone cyst of the L3 vertebra is presented. The technique of using therapeutic punctures as a preoperative preparation to be followed by an open surgical treatment is described. Absence of complaints and tumor recurrence, stability of the metal construct and bone fusion were the evaluation criteria. Results The patient was followed for 17 months after open surgery and CT scans showed no recurrence and demonstrated bone fusion at a long term. Discussion Many aspects of the course of the disease are to be considered in the treatment of children and adolescents with aneurysmal bone cyst of the spine. In our opinion, the step in the treatment of aneurysmal bone cyst of the spine should be considered Puncture for therapeutic and diagnostic purposes is to be performed to reduce pathological process is reduced, and the procedure to be followed by surgical intervention to remove the tumor. The strategy of surgical treatment would rely on impaired supporting columns of the spine, the degree of neural structure compression and a secondary spinal deformity. The need and extent of metal fixation is to be evaluated, potential vertebral growth identified, expediency of bone grafting after tumor removal, radical excision of the pathological focus to be considered. Conclusion The clinical case showed an effective combination of surgical techniques in the treatment of an aneurysmal bone cyst of the spine. Preoperative therapeutic puncture of the cyst allowed for reduction of the pathological process (decreasing pressure inside the cyst, thickening the cortical layer of the cyst and delimiting the tumor from the surrounding tissues), decreased volume of surgical intervention and blood loss due to a decreased activity of the pathological process compared to cases of untimely performed open surgery. Metal fixation in combination with bone auto- and allograft was practical for bone fusion.