Combination Of Demineralized Bone Matrix Research Articles

Photobiomodulation and Stem Cell on Repair of Osteoporotic Bones

Objective: This study examined the use of photobiomodulation (PBM) plus adipose-derived stem cells (ASCs) to enhance the osteogenic properties of demineralized bone matrix (DBM) scaffold in a critical size femoral defect (CSFD) of ovariectomy-induced osteoporotic (OVX) rats. Background: PBM could be used as a unique strategy to enhance the osteogenic potential of DBMs seeded with ASCs. Materials and methods: The OVX rats with a CSFD were divided into six groups: (1) Control (C); (2) DBM scaffold alone (S); (3) S+PBM; (4) S+alendronate; (5) S+ASC; (6) S+PBM+ASC. Stereological analysis, real-time polymerase chain reaction (RT-PCR), and cone-beam computed tomography (CBCT) were performed after euthanization at 4 and 8 weeks postimplantation surgery. Results: In the 8th week, Groups 4 and 6 showed a greatly high new trabecular bone volume than the scaffold group (all, p = 0.009). The CBCT data demonstrated that the CSFD was significantly smaller in the two, three, and six groups relative to the control group (p = 0.01, p = 0.000, and p = 0.000, respectively). RT-PCR revealed that Groups 3 and 6 had higher messenger RNA levels of osteocalcin (OC) and osteoprotegerin (OPG) compared with the control group (p = 0.05). Group 6 had significantly lower expression of receptor activator of nuclear factor-κB ligand (RANKL) compared with the control group (p = 0.02). Conclusions: The combination of DBM plus PBM plus ASC, as well as DBM plus PBM significantly improved the healing of CSFD in OVX rats, and affected the expression of OPG, OC, and RANKL genes.

Preliminary outcomes of the combination of demineralized bone matrix and platelet Rich plasma in the treatment of long bone non-unions

BackgroundA variety of bone graft substitutes have been introduced into the treatment of bone non-unions. However, clinical outcomes from current evidences are various and conflicting. This study aimed to present the preliminary outcomes of a treatment protocol in which the combination of demineralized bone matrix (DBM) and platelet rich plasma (PRP) was used as a bone graft substitute for long bone non-unions.MethodsData of this retrospective study were reviewed and collected from a consecutive case series involving 43 patients who presented with a long bone non-union and were treated in our department from October 2018 to May 2019. The combination of DMB and PRP was applied as a bone defect filler in 16 patients, whilst the other 27 patients were treated with iliac bone autografting. Patients’ demographics, postoperative complications and the result of bone union were compared and evaluated.ResultsThe demographic data between the two groups were comparable. No significant difference was found with regard to the incidence of postoperative complications. No graft rejection, heterotopic ossification or other complications were noted. The distribution of bony healing time was rather scattered but did not differ significantly between the groups (7.533 ± 3.357 months vs. 6.625 ± 2.516 months; P=0.341). Union was identified radiographically in 15 of 16 patients in the DBM+PRP group and in 24 of 27 patients in autograft group.ConclusionsThe present study identified that low incidence of postoperative complications and satisfactory bony healing rate could be achieved in the treatment of long bone non-unions augmented with the combination of DBM and PRP. Although these findings might indicate the promising future of this treatment protocol, larger and higher quality studies should also be executed to assess its routine use.

Enhanced Osteoinductivity of Demineralized Bone Matrix with Noggin Suppression in Polymer Matrix.

Demineralized bone matrix (DBM), a potential alternative to autologous bone-graft, has been increasingly used for clinical bone repair; however, its application in larger defects isn't successful partly due to the rapid dispersion of DBM particles and relatively lower osteoinductivity. Here, a novel strategy is created to complement the osteoinductivity of DBM by incorporating DBM in biopolymer hydrogel combined with the abrogation of BMP antagonism. Combined treatment of DBM + noggin-suppression displays increased osteogenic potency of human bone marrow mesenchymal stem cells (hBMSCs) in vitro. Injectable chitosan (MeGC)-based hydrogel with heparinization (Hep-MeGC) is further developed to localize and stabilize DBM. Noggin-suppression reveals the significant increase in osteogenesis of hBMSCs in the photopolymerizable Hep-MeGC hydrogels with the encapsulation of DBM. Moreover, the combination of DBM + noggin-suppression in the injectable Hep-MeGC hydrogel displays a robust bone healing in mouse critical-sized calvarial defects in vivo. The mechanistic analysis demonstrates that noggin-suppression increased DBM osteoinductivity by stimulating endogenous BMP/Smad signals. These results have shown promise in DBM's ability as a prominent bone grafting material while being coupled with gene editing mechanism and a localizing three-dimensional scaffold. Together, this approach poses a significant increase in the efficiency of DBM-mediated craniofacial bone repair and dental osteointegration.

Assessment of Reamer Irrigator Aspirator System (RIA) filtrate for its osteoinductive potential in a validated animal model

PurposePrevious studies indicate that Reamer Irrigator Aspirator (RIA) filtrate contains proteins that have the potential to stimulate bone healing. This study aimed to determine the osteoinductive capabilities of RIA filtrate in a validated in vivo model. MethodsWith Institutional Review Board approval, RIA filtrates from 9 patients were collected. The filtrate was processed to remove cells and inorganic particles. A portion of each sample was set aside for protein analysis while the remainder was lyophilized and prepared for implantation. With Animal Care and Use Committee approval, athymic mice (n = 16; 32 hind limbs) were randomly assigned to 1 of 4 groups (n = 8 limbs per group) for percutaneous gastrocnemius muscle injection of demineralized bone matrix (DBM) (10 mg), lyophilized RIA powder (10 mg), RIA liquid (10 mg of lyophilized RIA powder in 100ul phosphate buffered saline (PBS)), or DBM (10 mg) + RIA liquid (10 mg in 100ul PBS). Radiographs were obtained 2, 4, and 8 weeks after injection. At 8 weeks, mice were sacrificed and the entire gastrocnemius muscle from each hind limb was collected and processed for histologic examination. Histological sections and radiographs were assessed for ossification/calcification. Data were compared for statistically significant (p < 0.05) differences among groups and strong (R > 0.7) correlations between outcome measures. ResultsThe protein composition of RIA filtrates was consistent among patients and matched previous data. For all groups, radiographic scores were significantly (p < 0.014) higher (more calcification/ossification) at 8 weeks compared to 2 weeks. Radiographic scores for the DBM and DBM + RIA liquid groups were significantly higher than RIA liquid and RIA powder at 4 weeks and 8 weeks (p < 0.019 and p < 0.049, respectively). Histologic scores were significantly (p = 0.004) higher in the DBM + RIA liquid group compared to the RIA liquid group at 8 weeks. Histologic scores showed strong correlations (r > 0.77) to radiographic scores for all groups. ConclusionRIA filtrate liquid and powder were osteoinductive in vivo with new bone formation being most abundant using a combination of DBM and RIA filtrate in this validated animal model. RIA filtrate has potential for clinical use in augmenting bone healing treatments.

An effective delivery vehicle of demineralized bone matrix incorporated with engineered collagen-binding human bone morphogenetic protein-2 to accelerate spinal fusion at low dose.

The aim of this study was to investigate the feasibility and efficacy of a new delivery matrix using demineralized bone matrix (DBM) incorporated with collagen-binding bone morphogenetic protein-2 (CBD-BMP-2) in the rat inter-transverse spinal fusion model. Sixty rats undergoing posterolateral (inter-transverse) spinal fusion were divided into 3 groups according to the fusion materials containing different components (n = 20 per group). Group A were implanted with DBM, Group B with combination of DBM and BMP-2 and Group C with combination of DBM and CBD-BMP-2. After surgery, the spinal fusion of all the rats was assessed by plain radiography, CT + 3D reconstruction, manual palpation and histological evaluation. Significant difference was found in terms of solid fusion rate among the three groups, with 95% in Group C, 65% in Group B and 0% in Group A (P < 0.001). Compared with Groups B and A, new bone formation was observed earlier and was obvious larger, trabecular bone microarchitecture assessment was better and bone mineral density was statistically larger in Group C. In addition, more newly woven bone and osteocytes were shown by histological evaluation in Group C at 4 weeks post-operation. The present study showed CBD domain could help BMP-2 to improve the efficiency of posterolateral spinal fusion. DBM scaffold activated by collagen-binding BMP-2 was a feasible and promising bone repair vehicle. The present study showed better results in terms of plain radiography, CT + 3D reconstruction, manual palpation and histological evaluation in the rat inter-transverse spinal fusion model using DBM+CBD-BMP-2, compared with DBM+BMP-2 and DBM alone, indicating DBM scaffold activated by collagen-binding BMP-2 was a feasible and promising bone repair vehicle.

Comparison of the Usage of Autogenous Bone Graft, Demineralized Bone Matrix (DBM), Beta-tricalcium Phosphate (β-TCP), and a Combination of DBM and β TCP for the Reconstruction of Bone Defects

Comparison of the Usage of Autogenous Bone Graft, Demineralized Bone Matrix (DBM), Beta-tricalcium Phosphate (β-TCP), and a Combination of DBM and β TCP for the Reconstruction of Bone Defects

Histologic Evaluation of Critical Size Defect Healing With Natural and Synthetic Bone Grafts in the Pigeon ( Columba livia ) Ulna.

Fracture and bone segment loss are major clinical problems in birds. Achieving bone formation and clinical union in a fracture case is important for the survival of the bird. To evaluate the efficacy of bone grafts for defect healing in birds, 2 different bone grafts were investigated in the healing of a bone defect in 24 healthy pigeons ( Columba livia ). In each bird, a 1-cm critical size defect (CSD) was created in the left ulna, and the fracture was stabilized with external skeletal fixation (ESF). A graft of hydroxyapatite (HA) alone (n = 12 birds) or demineralized bone matrix (DBM) combined with HA (n = 12 birds) was implanted in the CSD. The CSD healing was evaluated at 3 endpoints: 3, 6, and 12 weeks after surgery. Four birds were euthanatized at each endpoint from each treatment group, and bone graft healing in the ulna CSD was evaluated by histologic examination. The CSD and graft implants were evaluated for quality of union, cortex development, and bone graft incorporation. Results showed no graft rejection in any bird, and all birds had connective tissue formation in the defect because of the bone graft application. These results suggest that bone defect healing can be achieved by a combination of osteoinductive and osteoconductive bone graft materials for clinical union and new bone regeneration in birds. The combination of DBM and HA resulted in a better quality bone graft (P < .05) than did HA alone, but there was no significant differences in cortex development or bone graft incorporation at 3, 6, or 12 weeks. From the results of this study, we conclude that HA bone grafts, alone or in combination with DBM, with external skeletal fixation is suitable and safe for bone defect and fracture treatment in pigeons.

Demineralized bone matrix and human cancellous bone enhance fixation of porous-coated titanium implants in sheep

Allogenic bone graft has been considered the gold standard in connection with bone graft material in revision joint arthroplasty. However, the lack of osteogenic potential and the risk of disease transmission are clinical challenges. The use of osteoinductive materials, such as demineralized bone matrix (DBM), alone or in combination with allograft or commercially available human cancellous bone (CB), may replace allografts, as they have the capability of inducing new bone and improving implant fixation through enhancing bone ongrowth. The purpose of this study was to investigate the effect of DBM alone, DBM with CB, or allograft on the fixation of porous-coated titanium implants. DBM100 and CB produced from human tissue were included. Both materials are commercially available. DBM granules are placed in pure DBM and do not contain any other carrier. Titanium alloy implants, 10 mm long × 10 mm diameter, were inserted bilaterally into the femoral condyles of eight skeletally mature sheep. Thus, four implants with a concentric gap of 2 mm were implanted in each sheep. The gap was filled with: (a) DBM; (b) DBM:CB at a ratio of 1:3; (c) DBM:allograft at a ratio of 1:3; or (d) allograft (gold standard), respectively. A standardized surgical procedure was used. At sacrifice 6 weeks after implantation, both distal femurs were harvested. The implant fixation was evaluated by mechanical push-out testing to test shear mechanical properties between implant and the host bone and by histomorphometry. Non-parametric tests were applied; p < 0.05 was considered significant. Mechanical fixation showed that the strengths among the DBM/CB, DBM/allograft and allograft groups were not statistically different. The strength of the DBM group was 0.01 MPa, which was statistical significantly lower than the other three groups (p < 0.05). Histomorphometry results showed that the bone ongrowth in the DBM group was statistically significantly lower than the other three groups, while the volume fraction of new bone showed no significant difference among all the groups. Our data revealed that adding DBM to CB or to allograft resulted in comparable mechanical properties relative to the gold standard, allograft. We found inferior early effects of DBM alone on the fixation of porous-coated titanium implant in this animal model, while the long-term effects have to be investigated. The combination of DBM with CB, which can be used off the shelf, may represent an alternative to allograft. A cost-benefit analysis is necessary before application in clinical trial.