Columella Deviation Research Articles

Three-dimensional Analysis of Presurgical Nasoalveolar Molding Outcomes in Patients with Unilateral Cleft Lip and Palate: A Preliminary Study Using LED Surface Scanning Technology.

ObjectivesPresurgical infant orthopedic appliances, such as presurgical nasoalveolar molding (PNAM) devices, are used to attain optimal conditions for primary repair of the lip and nose (PRoLN) in patients with cleft lip. We aimed to analyze the three-dimensional (3D) outcomes of PNAM using an LED surface scanner. MethodsFifteen patients with unilateral cleft lip and palate (CLP) were included in this study and treated using a PNAM device. The patients’ faces were digitized pre- and post-PNAM using an Artec Space Spider scanner, and the scanned data were analyzed using 3D software (Geomagic Control X and ANSYS SpaceClaim). The columellar angle (CA), nostril curvature (NC) on the affected (NC_A) and unaffected (NC_U) sides, gap of cleft lip (GCL), alar width (AW), and nasal tip angle (NTA) were measured. ResultsCA increased significantly by 10.00° and NC_A by 0.030 mm-1 (p<0.001). GCL decreased by 4.98 mm2 on average and NC_U by 0.015 mm-1 (p=0.029 and 0.046, respectively). AW also decreased by approximately 1.22 mm pre- and post-treatment (p=0.002), and NTA, which shows a lateral profile, decreased by approximately 3.32° (p=0.002). ConclusionsThis study confirmed the orthopedic benefits of PNAMd treatment through 3D analysis using an LED surface scanner. Further studies involving a larger number of participants are warranted to study the effects of PNAM and analyze longitudinal changes in patients with CLP. Clinical SignificanceThis study shows that PNAM effectively corrects columellar deviation and nostril shape in patients with unilateral cleft lip, with 3D scanners enhancing primary lip and nose repair outcomes.

Treatment outcomes of digital nasoalveolar moulding in infants with cleft lip and palate: A systematic review with meta-analysis.

The aim of this systematic review was to compare the treatment outcomes of digital nasoalveolar moulding (dNAM) technique with conventional nasoalveolar moulding (cNAM) or non-presurgical intervention protocol in infants with unilateral (UCLP) or bilateral (BCLP) cleft lip and palate. A bibliometric search by MEDLINE (via Ovid), Embase, Cochrane Library, grey literature and manual method was conducted without language restriction until November 2023. Literature screening and data extraction were undertaken in Covidence. The risk of bias was evaluated using the Newcastle-Ottawa Scale and RoB-2. Pooled effect sizes were determined through random-effects statistical model using R-Software, and the certainty of evidence was assessed using the GRADE approach. Among 775 retrieved articles, nine studies were included for qualitative synthesis (6-UCLP, 3-BCLP), with only three eligible UCLP studies for meta-analysis. In the UCLP group, very low certainty of evidence indicated no difference in alveolar cleft width (SMD, 0.13 mm; 95% CI, -0.31 to 0.57; I2, 0%), soft tissue (lip) cleft gap, nasal width, nasal height, and columellar deviation angle changes between dNAM and cNAM. In the BCLP group, qualitative synthesis suggested similar changes in alveolar, lip, and nasal dimensions with dNAM and cNAM. In both cleft groups (UCLP, BCLP), reduced alveolar cleft width was observed in the dNAM group compared to the non-presurgical intervention protocol, along with fewer clinical visits and reduced chairside time for dNAM compared to cNAM. It can be concluded that the treatment outcomes with dNAM were comparable to cNAM in reducing malformation severity and were advantageous in terms of chairside time and clinical visit frequency. However, the overall quality of evidence is very low and standardization is needed for the virtual workflow regarding the alveolar movements and growth factor algorithms. Registration: PROSPERO-database (CRD42020186452).

A spear flap surgical revision

A 55-year-old male presented with a recurrent infiltrative basal cell carcinoma of the right nasal ala. Previous incomplete excision was repaired with second intention healing resulting in a contracted ala with columellar deviation and nostril asymmetry. [...]

Effectiveness of comprehensive rhinoplasty on secondary nasal deformity with saddle nasal deformity after cleft lip surgery

To investigate the effectiveness of comprehensive rhinoplasty with autogenous costal cartilage grafting and prosthesis augmentation rhinoplasty in the treatment of secondary nasal deformity with saddle nasal deformity after cleft lip surgery. The clinical data of 96 patients with secondary nasal deformity with saddle nasal deformity after cleft lip surgery between September 2008 and January 2019 were retrospectively analyzed. There were 17 males and 79 females with an average age of 25.6 years (range, 17-38 years). Autogenous costal cartilage grafts were used to construct stable nasal tip framework and enhance the strength of alar cartilage. Nasal dorsum prostheses (39 cases of bulge, 45 cases of silicone prosthesis) or autogenous costal cartilage (12 cases) were used for comprehensive rhinoplasty. Visual analogue scale (VAS) score was used to evaluate the postoperative satisfaction subjectively, and nasal alar height symmetry index, nasal alar width symmetry index, nasal dorsum central axis deviation angle, and nasal columella deviation angle were calculated to evaluate objectively before and after operation. All patients were followed up 6 months to 8 years, with an average of 13.4 months. Nasal septal hematoma occurred in 3 patients after operation, which was improved after local aspiration and nasal pressure packing. Two cases had mild deformation of the rib cartilage graft of the nasal dorsum, one of which had no obvious deviation of the nasal dorsum and was not given special treatment, and one case underwent the cartilage graft of the nasal dorsum removed and replaced with silicone prosthesis. The incisions of the other patients healed by first intention, and there was no complication such as postoperative infection and prosthesis displacement. The nasal alar height symmetry index, nasal alar width symmetry index, nasal dorsum central axis deviation angle, and nasal columella deviation angle significantly improved after operation when compared with preoperative ones ( P<0.05). Postoperative subjective satisfaction evaluation reached the level of basic satisfaction or above, and most of them were very satisfied. Comprehensive rhinoplasty using autologous rib cartilage grafting to construct a stable nasal tip support, combined with dorsal nasal prosthesis or autologous cartilage implantation, can achieve good effectiveness on secondary nasal deformity with saddle nasal deformity after cleft lip surgery.

Retrospective study on primary rhinoplasty for unilateral complete cleft lip nasal deformity.

A retrospective study was conducted on the effect of primary rhinoplasty on infants with unilateral complete cleft lip nasal deformity. Infants with unilateral complete cleft lip in the Department of Cleft Lip and Palate Surgery, College of Stomatology, Xi'an Jiaotong University were selected. All infants underwent cheiloplasty and primary rhinoplasty. We reconstructed the nasal base and corrected the nasal septum and alar deformity at the same time. The nasal splint was worn 1 week after the surgery. The nasal morphology before surgery as well as 1 week and 1 year after surgery were analyzed. Significant differences were found on symmetry ratios including nasal base width, nostril height, alar angle and columella deviation angle between before and after operation (P<0.05). There were statistically significant differences in the symmetry ratio of nostril height and columella deviation angle between 1 year after surgery and 1 week after surgery (P<0.05). Infants with unilateral complete cleft lip nasal deformity can achieve satisfactory nasal morphology by primary rhinoplasty. Despite few cases of recurrence of nasal deformity, the nasal morphology can be well improved and maintained.

Observation of Nasal Morphology in Unilateral Microform Cleft Lip Repaired by a Hidden Skin Incision.

Microform cleft lip is the mildest type of cleft lip without obvious defects of the upper lip. The nose deformities of microform cleft lip include flattened nostril rim, alar base asymmetry, and septal deviation. A hidden skin incision with nasal base muscle reconstruction was introduced in nose deformities of microform cleft lip. To investigate the operative effect, we reviewed 21 patients with microform cleft lip treated with a hidden skin incision with nasal base muscle reconstruction from May 2020 to October 2022. Photogrammetric nasal morphometric measurements were compared preoperatively and six months postoperatively. The proportional value was obtained from the cleft and the noncleft sides, and paired t-test analysis was used to evaluate the surgical outcome. Significant differences were found in all nasal morphologic measurements at 6 months postoperatively compared to preoperatively (p < 0.05). After surgery, the alar base and nostril were narrowed, while the lateral lip height was increased on the affected side. The height of the nostrils on the affected side was increased, and the nasal columella deviation was released. In addition, the ratio of the cleft-to-noncleft nostril area was closer to 1.0 after surgery. The unilateral microform cleft lip nasal deformity can be repaired through a small hidden incision. This journal requires that authors assign a level of evidence to each article. For a full description of these evidence-based medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Lyophilized allogeneic costal cartilage graft for septorhinoplasty

Background As rhinoplasty techniques have become more complex, surgeons often need more than what septal or conchal cartilage can provide. While costal cartilage became more popular for that reason, some surgeons are still uncomfortable with its invasiveness and donor site morbidity. Here, we used lyophilized allogeneic costal cartilage for septorhinoplasty and investigated its safety and usefulness.Methods The costal cartilage was harvested from a cadaveric donor and treated via multiple steps, including defatting and lyophilization, to remove all viable cells and antigenicity. The cartilage was then stored at room temperature and rehydrated 24 hours before use. Lyophilized cartilage allografts were used in 20 patients. Three types of septal graft were performed — spreader, batten, and extension — to correct septal or columellar deviation and enhance the nasal tip.Results The mean follow-up period was 4.3 years. In all cases, the graft successfully met the rhinoplasty purpose. No significant deformation was detected in any of the patients. Although warping was observed in one patient (5%), there was no case of clinical infection, extrusion, or graft removal and no revisional surgery for an unfavorable aesthetic result.Conclusions Lyophilized allogeneic cartilage was used for septorhinoplasty very safely and effectively. It can be carved into any shape and has all other properties required for perfectly replacing autologous costal cartilage. The main advantage of cartilage allografts is a limitless supply of high-quality cartilage without donor site morbidity. The disadvantages include the need for special facilities and manpower and extra covering cost.

Dynamic Molding of Cleft Nasal Cartilage in Unilateral Complete Cleft Lip and Palate Using Simple Segmented NAM.

Nasal morphology remodeling by nasoalveolar molding (NAM) before primary lip repair gives better post-surgery outcomes. However, traditional NAM has high technical sensitivity, a steep learning curve, frequent need for modifications, and interrupts lifting forces on the nasal cartilage during oral movements, thereby reducing overall efficacy of device. To eliminate interaction and interdependency of the nasal bulb with alveolar molding plate, we propose segmenting NAM (SNAM) into nasolabial complex molding (NCM) and alveolar complex molding (ACM). NCM addresses ala-septum, lip-premaxilla via lambda-nasal hook and lip taping. ACM addresses palate-alveolus via Yen-modified feeding plate. When the hook is suspended by elastic traction, nasal complex undergoes a natural rotation, where cleft-side ala lifts and septum medializes. Lip taping and feeding plate augment positive molding of cleft segments and maintain transverse relation. The current study outlines SNAM treatment strategy and assesses the effect on nasal deformity. Retrospective observational cohort study set in a comprehensive cleft care centre. Twenty patients with unilateral complete cleft lip and palate who underwent SNAM were selected. Retrospectively, standardized basilar views, pre-, and post-SNAM therapy were evaluated for nostril height, and nostril width, as a ratio of cleft to non-cleft side along with columellar deviation angle. SNAM resulted in significantly improved nostril symmetry with no complications observed. Nostril height ratio increased from 0.35 ± 0.10 to 0.78 ± 0.17. Nostril width ratio decreased from 3.14 ± 0.66 to 2.18 ± 0.42. Columellar deviation angle increased from 26.5 ± 6.30 to 58.5 ± 9.88 degrees. Dynamic correction of the nasal deformity in UCLP is possible through SNAM therapy.

Does Head Tilt Influence Facial Appearance More Than Head Turn?

To evaluate the frequency of facial asymmetry parameters in patients with head tilt versus those with head turn. This cross-sectional comparative study was performed on 155 cases, including 58 patients with congenital pure head turn due to Duane retraction syndrome (DRS), 33 patients with congenital pure head tilt due to upshoot in adduction or DRS, and 64 orthotropic subjects as the control group. The facial appearance was evaluated by computerized analysis of digital photographs of patients' faces. Relative facial size (the ratio of the distance between the external canthus and the corner of the lips of both face sides) and facial angle (the angular difference between a line that connects two external canthi and another line that connects the two corners of the lips) measured as quantitative facial parameters. Qualitative parameters were evaluated by the presence of one-sided face, cheek, and nostril compression; and columella deviation. The facial asymmetry frequency in patients with head tilt, head turn, and orthotropic subjects was observed in 32 (97%), 50 (86.2%), and 22 (34.3%), respectively (P 0.001). In patients with head tilt and head turn, the mean facial angle was 1.78º 1.01º and 1.19º 0.84º, respectively (P = 0.004) and the mean relative facial size was 1.027 0.018 and 1.018 0.014, respectively (P = 0.018). The frequencies of one-sided nostril compression, cheek compression, face compression, and columella deviation in patients with pure head tilt were found in 19 (58%), 21 (64%), 19 (58%), and 19 (58%) patients, respectively, and in patients with pure head turn the frequencies were observed in 42 (72%), 37 (63%), 27 (47%), and 43 (74%), respectively. All quantitative and qualitative facial asymmetry parameters and facial asymmetry frequencies were significantly higher in head tilt and head turn patients as compared to the control group (P 0.001). All facial asymmetry parameters in patients with head tilt and head turn were significantly higher than orthotropic subjects. The quantitative parameters such as relative facial size and facial angle were significantly higher in patients with pure head tilt than pure head turn. The results revealed that pure head tilt was associated with a higher prevalence of facial asymmetry than pure head turn.

Comparing definitive unilateral cleft rhinoplasty with and without diced-cartilage alar-base augmentation: A retrospective cohort study

This retrospective cohort study aimed to compare the long-term aesthetic outcomes and satisfaction of patients who underwent two techniques of definitive unilateral cleft rhinoplasty. The two cohorts, comprising patients with mature unilateral cleft deformity, were managed with definitive rhinoplasty, either with or without diced-cartilage alar-base and peri-alar augmentation (ABPA). Thirty patients were included in each cohort. Anthropometric measurements, complications, patient satisfaction scores, and third-party surgeon assessment scores were reviewed. In both cohorts, anthropometric parameters improved. Rhinoplasty with ABPA was the superior cohort in terms of columellar length (10.3 ± 1.0 in the cohort with ABPA, compared with 7.9 ± 0.6 in the cohort without ABPA; p < 0.001), alar-base angle (0.2 ± 0.2, compared with 4.3 ± 0.3; p < 0.001), and columellar deviation (2.5 ± 1.4, compared with 10.3 ± 2.1; p < 0.001). This cohort also had more symmetry in nostril height and nostril width (p < 0.001), a lower recurrence rate (one case compared with 22 cases; p < 0.001), a higher patient satisfaction score (p = 0.002), and a higher surgeon assessment score (p < 0.001, Cronbach’s alpha = 0.706, Kendall’s coefficient of concordance = 0.787). Within the limitations of this study, it appears that the described technique for augmenting the alar-base and peri-alar maxillary area is manageable, and yields consistent long-term results.

Short-term surgical outcomes in patients with unilateral complete cleft lip and palate after presurgical nasoalveolar molding therapy: A three-dimensional anthropometric study.

This brief research report aimed to evaluate the short-term efficacy of presurgical nasoalveolar molding (PNAM) therapy on the nasolabial morphology three dimensionally in patients with non-syndromic complete unilateral cleft lip and palate (UCLP). Thirty-six patients with non-syndromic complete unilateral complete cleft lip and palate were enrolled retrospectively and categorized into 2 groups: 18 patients who had received PNAM treatment (PNAM group) and 18 age-matched patients who have not receive PNAM treatment (no PNAM group) from 2017 to 2021. The average starting age for PNAM therapy was 18.33 days, and the average PNAM treatment duration was 99.08 days. Twelve nasolabial parameters were measured to compare the postsurgical outcomes of two groups. In PNAM groups, cleft width, vertical distance between double Crista philtri and columellar deviation were reduced compared to that in no PNAM group. And nostril height was larger than that in no PNAM group. The differences between two groups were statistically significant (p < .05). There were no statistical differences in columellar length, nostril width and bi-alar width between two groups. However, the nostril width on cleft side in PNAM group was decreased by an average of 1.1 mm. Our result indicated that PNAM therapy decreased cleft width and vertical distance between Crista philtri. It also increased nasal symmetry by decreasing columellar deviation, increasing nostril height.

Application of septal extension grafts with auricular cartilage in rhinoplasty.

Rhinoplasty is one of the most common cosmetic surgeries in China. Septal extension grafts (SEG) have been widely used in rhinoplasty, but there are few reports on SEG derived from ear cartilage. This study aims to explore the effectiveness and stability of auricular cartilage nasal SEG transplantation in Chinese rhinoplasty. A retrospective analysis of 35 rhinoplasty patients admitted from September 2019 to March 2022 has been conducted. Among them, 29 patients underwent rhinoplasty for the first time and 6 patients underwent rhinoplasty with the age of 18-32 (average 22.4) years old. The postoperative follow-up was 3-28 (average 18.5) months. The improvement of the nose shape was observed. The changes of the nose tip angle, nasolabial angle, and nasofrontal angle were compared between before and after the operation, and the complications were recorded. All patients who underwent rhinoplasty with a septal extension grafts constructed from the concha cavity and concha cartilage showed significant improvement in nasal contour. The preoperative nasal tip angle, nasolabial angle, and nasofrontal angle were significantly improved compared with 3 months after operation (all P<0.001), and there was no significant difference between 3 months and 14 months after operation (all P>0.05). The appearance of nasal cavity was satisfactory in 32 patients after operation. Columella deviation occurred in 2 patients and 1 patient complained of downward rotation of the nasal tip, which was satisfied after readjustment of the graft. The simplified SEG derived from auricular cartilage can provide stable support for the nasal tip, the nasal shape is natural after operation, and minimal trauma of unilateral auricle cartilage transplantation remains.

Augmentation Rhinoplasty in Cleft Lip Nasal Deformity Using Alloplastic Material and Autologous Cartilage.

Secondary cleft rhinoplasty typically requires large amounts of cartilage grafts for augmentation. The purpose of this study was to present our short-term experience with alloplastic implants in cleft rhinoplasty. This was a retrospective cohort study of cleft lip and palate patients treated with secondary rhinoplasty at Hanoi Medical University Hospital and Ruby Hospital between 2017 and 2020. All rhinoplasty procedures consisted of lower lateral cartilage repositioning, a dorsal augmentation with silicone implant, columellar strut implant or graft, and onlay tip grafts. Cartilage was obtained from the septum and concha, and no cartilage was harvested from the rib. The study outcomes included the Rhinoplasty Outcome Evaluation (ROE) survey, a modified Mortier scoring scale, 8 intranasal measures of symmetry, and 4 nasofacial measures of tip projection and nasal length. Changes in patient satisfaction and nasal esthetics were compared before and after surgery. A total of 38 patients were included in the final study sample, of whom 65.79% had unilateral clefts. The overall complication rate was 7.89%, and there were 2 cases of infection and 1 case of dorsal implant displacement. Following rhinoplasty, ROE satisfaction scores significantly increased (+39.36, P <0.01) and Mortier severity scores decreased (-3.06, P <0.01). Nostril symmetry nearly normalized in width, height, and inclination. Mean columellar deviation decreased from 8.82 to 2.08 degrees, and nasal projection increased as assessed on multiple analyses. Patients with bilateral clefts had similar improvements in ROE and Mortier scores. In our experience, synthetic implants simplified the correction of cleft nasal deformity and eliminated the need for costal cartilage. We found that our protocol produced acceptable and stable short-term clinical results without increasing the complication rate above what has been reported with autologous grafts.

Does Presurgical Nasoalveolar Molding Reduce the Need for Future Bone Grafting in Cleft Lip and Palate Patients? A Systematic Review and Meta-Analysis.

Nasoalveolar molding (NAM) is a technique that is utilized in patients with cleft lip/palate before performing lip surgery. This procedure has been shown to result in a more aesthetic nose with lesser columellar deviation and reduced scaring. The aim of our study was to evaluate the long-term results of NAM and gingivoperiosteoplasty in patients with cleft lip and palate. An electronic search of databases (ie, PubMed, ISI Web of Science, EMBASE, Scopus, and Google Scholar) from inception to March 2021 was performed and after selecting the eligible studies, relevant data were collected using piloted extraction forms. The success rate of NAM and gingivoperiosteoplasty, and Bergland score were pooled using random-effects inverse variance meta-analysis. Seven studies were included in this meta-analysis and systematic review. The pooled mean success rate of NAM with gingivoperiosteoplasty (GPP) based on the continuity of alveolar bone structure was 71% (95% confidence interval [CI] = 54-85). This means that in 71% of cases NAM + GPP treatment eliminated the need for future bone grafts. Also, no significant difference between the success rate (risk ratio = 1.00, 95% CI = 0.64-1.58) and mean Bergland score (mean difference = 0.64, 95% CI = -1.04 to 2.31) of NAM + GPP and skeletal bone graft was found. Nasoalveolar molding and gingivoperiosteoplasty was successful in 71% of cases treating patients with cleft lip and palate. This treatment is similar with the secondary alveolar bone graft in both the success rate and the alveolar height that it generates while being less invasive and with lower morbidity.

Qualitative Assessment of Surgical Repair of Three Types of Unilateral Cleft Lip

Objective: To assess the effect of the three types of unilateral cleft lip (UCL) [cleft lip only, cleft lip and alveolus, and cleft lip alveolus and palate] on the outcome of the repair. Material and Methods: This study was a case series of effect of types of UCL on the outcome of the repair. Fifteen subjects each were in three UCL phenotypes groups. Evaluation of the scar, lip, and nose was done qualitatively by both parents/guardians and professionals using a modified form of the criteria described by Christofides et al. (2006). Results: In the assessment of the surgical scar, the parents found a difference between the three types of cleft in terms of texture, shape, and width of the scar and presence of columella deviation. The professional assessors, however, only found the three types of cleft to be different in the presence of alar flattening. Conclusion: Differences truly exist in the outcome of surgical repair of the three types of unilateral cleft lip, especially in the aesthetics of the nose and in the width and shape of the residual lip scar. Thus, it is important to consider this in the assessment of UCL repair because putting the subtypes together might have a negative impact on the assessment.

Facial Asymmetry in Unilateral Congenital Superior Oblique Muscle Palsy.

This study was conducted to evaluate facial asymmetry in unilateral congenital superior oblique muscle palsy (SOP). The results showed that all facial asymmetry parameters had a higher frequency in SOP patients compared with orthotropic individuals. This study aimed to evaluate the characteristics of facial asymmetry in unilateral congenital SOP and compare with orthotropic individuals. This cross-sectional comparative case series was conducted in 58 patients with ocular torticollis caused by SOP (mean ± standard deviation age, 18 ± 12 years) and 58 orthotropic individuals (mean ± standard deviation age, 19 ± 13 years). The exact form of torticollis was determined by direct observation from yaw, roll, and pitch axes. Four photographs were taken from patients: (1) with torticollis to calculate the amount of head tilt; (2) with the head in the straight position to calculate the facial angle and relative facial size (RFS); and (3 and 4) with the head positioned downward (to compare the cheek size) and upward (to assess columella deviation and nostril asymmetry). Twenty-nine patients (50%) had a head tilt, 23 (39.66%) had combined head tilt and a face turn, and 6 (10.44%) had a pure face turn. The mean ± standard deviation of head tilt, facial angle, and RFS was 10.11 ± 6.31°, 1.11 ± 1.67°, and 1.003 ± 0.126 in SOP patients, respectively, and the mean RFS and facial angle were significantly higher in SOP patients compared with orthotropic individuals (both P < .001). Facial hemihypoplasia, unilateral cheek compression, nostril asymmetry, and columella deviation were observed in 43 (74.1%), 31 (53.4%), 39 (67.2%), and 38 patients (65.5%), respectively, which were all significantly more common compared orthotropic individuals (P < .001). Facial asymmetry was seen in 52 patients (91.2%) and 17 orthotropic subjects (29.3%), respectively (P < .001). All quantitative and qualitative facial asymmetry parameters had a higher frequency in SOP patients compared with orthotropic subjects.

Effect of Nasoalveolar Molding in Infants with Cleft Lip & Palate

In the 19 th century McNeil (prosthodontist) used an oral prosthesis to approximate the cleft alveolar segments and thus initiating the concept of modern presurgical infant orthopedics. More recently (1994) Barry Grayson developed a new technique that not only it approximates the alveolar segments, but it also reshapes the nose in order to perform primary nose surgery, this technique is called Nasoalveolar molding (NAM). Patients with nonsyndromic complete unilateral cleft lip and palate. Nasoalveolar molding was performed for each patient and treatment time took 8-12 weeks. A serial of standard basilar view 1:1 photographs were taken for each patient. Each patient was photographed at the initial visit and after the nasoalveolar molding. Digital caliper was used to measure the cleft size on the study model at the initial visit and after nasoalveolar molding. Patients expressed good improvement. The cleft size was reduced significantly. Improved both the columella deviation and length as well as the nostril width and height in the cleft side. NAM is an effective procedure in reducing the alveolar cleft size and it also improves the nasal architecture. This will facilitate the work of the plastic surgeon during the lip adhesion and primary nose surgery and consequently with better aesthetic outcome.

Primary rhinoplasty in unilateral incomplete cleft lip nose: A 4-year follow up

ObjectiveThe aim of this study was to assess aesthetic result and parents’ satisfaction of primary rhinoplasty in unilateral incomplete cleft lip patients. MethodsThirty-two consecutive unilateral incomplete cleft lip nose patients were operated in the tertiary hospital from 2012 to 2014. Primary rhinoplasty was done following the principle of the modified McComb repair. Nostril height, dome height, alar base width, nostril height to width ratio, dome height to nostril width ratio, nasolabial angle and columella deviation were measured on preoperative and 4-year postoperative photographs. Visual analogue scale (VAS) was assessed for each parent before the surgery and 4-year postoperatively. ResultsThe preoperative and postoperative photographic analysis revealed significant improvement in nostril height ratio and dome height ratio. Nostril height to width ratio and dome height to nostril width ratio significantly increased. Alar base width significantly decreased. The nasolabial and columella deviation angles improved significantly. The mean parent-related satisfactory assessment based on the VAS showed statistically improved scores postoperatively. ConclusionWe believe this technique with minimal dissection could improve symmetry and satisfaction, although every individual surgeon could choose his preferable technique based on the components of correction that he is capable of executing reliably while considering the long-term outcomes.

Comparative clinical evaluation of modified and conventional Grayson's presurgical nasoalveolar molding technique in infants with complete unilateral cleft lip and palate

Presurgical nasoalveolar molding (PNAM) was introduced by Grayson et al., in 1993 to presurgically mold the alveolus, lip, and nose in infants with cleft lip and palate (CLP). The aim of this comparative clinical trial was to evaluate the efficacy and efficiency of Modified and Conventional Grayson's PNAM in patients concerning morphological and anatomical changes in maxillary alveolus, nasal symmetry, number of visits, and duration of treatment. In this comparative clinical trial study, 16 infants with unilateral complete CLP were equally divided into two groups: Group I (modified PNAM technique using titanium molybdenum alloy [TMA] wire nasal stent) and Group II (conventional PNAM technique using stainless steel wire nasal stent). Patient photographic evaluation of nasal symmetry and maxillary study model CAD-CAM analysis, pre- and post-operatively in both groups, were compared using a paired t-test between the groups using the Chi-square test with P < 0.05 as statistically significant. In both groups, on evaluating nasal measurements, statistically significant (P < 0.05) decrease in nasal width and increase in columella deviation angle, a decrease of nostril length, and an increase of columella length in Group I were observed. On maxillary study model evaluation, a statistically significant (P < 0.05) decrease in width of the alveolar cleft was noticed in both groups and lateral deviation of the incisal point in Group I and width of the palatal cleft in Group II was noticed. This study showed a morphological improvement in nasal symmetry and maxillary alveolar morphology in complete unilateral CLP patients, treated with both Modified and Conventional PNAM techniques, with the Modified PNAM technique being more efficient for treatment duration and the number of adjustments as there are less number of visits.

A Longitudinal Study of The Nasal Symmetry in Unilateral Cleft Lip And Palate Patients Treated With Nasoalveolar Molding.

Background Nasoalveolar molding (NAM) has been extensively used as a presurgical technique in the treatment of unilateral cleft lip and palate (UCLP) over the last two decades. It has proven to be a useful tool to reduce the cleft size, improve nasal symmetry, and increase the columellar length. The long-term stability of these findings has not been conclusively proven. Methods In this longitudinal study, the nasal symmetry of 24 NAM treated UCLP patients was evaluated to assess the 5-year stability of NAM. The basal photographs were shot postcheiloplasty (T1), at 1-year follow-up (T2), at 3-year follow-up (T3), and 5-year follow-up (T4) appointments. Results In this study, we found that NAM was a useful adjuvant in achieving nasal symmetry in patients with UCLP in the immediate postoperative period. However, as the patients aged, there was a gradual loss of mean nasal height (by 22.83%) and columella length (by 24.89%), a mean gain in nasal width (by 40.25%) and alar base width (by 40.69%), and an increase in the columella deviation (by 3.46%) from the T1 to the T4 follow-up. Conclusion Although there is no conclusive evidence, the loss of symmetry may be due to the unequal growth on the cleft and noncleft sides. These patients will be followed-up till end of growth for a definite conclusion on the long-term effect of NAM.