Color Stability Of Resins Research Articles

TiO2-Nanofillers Effects on Some Properties of Highly- Impact Resin Using Different Processing Techniques.

Background:The criteria of conventional curing of polymethyl methacrylate do not match the standard properties of the denture base materials.Objectives:This research was conducted to investigate the addition of TiO2 nano practical on impact strength, thermal conductivity and color stability of acrylic resin cured by microwave in comparison to the conventional cured of heat-polymerized acrylic resin.Materials and Methods:120 specimens made of high impact acrylic resin were divided into two main groups according to the type of curing (water bath, microwave), then each group was subdivided into two groups according to the addition of 3% TiO2 nano-fillers and control group (without the addition of TiO2 0%). Each group was subdivided according to the type of test into 3 groups with 10 specimens for each group. Data were statistically analyzed using Student t-test to detect the significant differences between tested and control groups at significance level (P<0.05).Results:According to curing type methods, the results showed that there was a significant decrease in impact strength of microwaved cured resin, but there was no significant difference in the thermal conductivity and color stability of resin. In addition, by using nanofiller, there was a significant increase in the impact strength and color stability with the addition of 3% TiO2 nanofillers, but no significant difference was found in the thermal conductivity of the acrylic resin.Conclusion:The microwave curing of acrylic resin had no change in the color stability and thermal conductivity in comparison to the water bath, but the impact strength was decreased. The addition of 3% TiO2 improved the impact and the color stability, but the thermal conductivity did not change.

Influence of Staining Solution and Bleaching on Color Stability of Resin Used for Caries Infiltration.

The objective of this study was to evaluate the color stability of Icon-infiltrated white spot lesions after staining and the bleaching effect on the infiltrated and stained surfaces. Enamel-dentin specimens (N=30, 5 × 5 × 3 mm, 1-mm enamel + 2-mm dentin thickness) were prepared from bovine incisors and randomly allocated into three groups (n=10): control, demineralized, and infiltrated. Artificial enamel subsurface lesions were created using 50 mL of 0.05 M acetate buffer solution. Specimens were produced by Icon application in enamel caries-like lesions, according to the manufacturer's instruction. Baseline color readings were assessed using a spectrophotometer, and CIE L*a*b* measurements of each specimen were performed using a white background. To simulate extrinsic dietary staining, specimens were placed into a 4-mL coffee infusion, three times daily for 15 minutes, for 14 days. After the staining procedure, color measurements were performed again. Then, bleaching procedures were performed using 16% carbamide peroxide gel for four hours daily for 21 days, and a final color assessment was performed. To compare the baseline and final measurements, t-test was used (α =0.05). The statistical comparison between the groups was performed using the one-way analysis of variance and Tukey tests (α =0.05). Coffee staining provided a significant reduction of L* values and an increase of a* and b* in all groups (control, decayed, and infiltrated). The bleaching procedure provided a significant increase in L* and decrease of a* and b* values in all groups. There was no significant difference in ΔE values between decayed and infiltrated groups before bleaching, and after bleaching, the infiltrated group showed the lowest ΔE values. It can be concluded that enamel infiltrated with Icon presents significant alteration of color after staining when compared with sound enamel. However, if there is discoloration of the infiltrant, the bleaching treatment can be used successfully.

Color stability of resin used for caries infiltration after exposure to different staining solutions.

The exposure of specimens to colored solutions resulted in significant color alteration. The demineralized enamel treated with resin infiltration showed significantly higher staining than all other tested groups; however, the repolishing of the specimens minimized the staining effect.

Color Stability of Resin Used for Caries Infiltration After Exposure to Different Staining Solutions

Color Stability of Resin Used for Caries Infiltration After Exposure to Different Staining Solutions

Influence of natural weathering on colour stability of materials used for facial prosthesis

Colour stability of resin and silicone is an important factor for longevity of facial prostheses. The aim of this study was to evaluate the colour stability of resins and silicone for facial prostheses. Three brands of acrylic resin and one of facial silicone were evaluated considering pigment incorporation for the colourless materials. Ten samples of each material were fabricated and submitted to measurements of chromatic alteration initially and after 90 and 180 days of weathering natural through visual analysis and spectrophotometry. Data were evaluated by ANOVA and Tukey test (p < 0.05). Statistically significant colour alteration was observed among some materials regardless of the period. The materials did not present a statistical difference between 90 and 180 days except for the pigmented heat-polymerized resin. The colour difference between pigmented Silastic MDX4-4210 and colourless Silastic was statistically significant (p < 0.01) in both periods as well as between pigmented and colourless heat-polymerized resin, and between the resins Rapidaflex and Lentaflex. The visual method demonstrated colour alteration in all materials evaluated during the first 90 days of ageing. All materials exhibited colour alteration due to exposure to environment.

Color Stability of Resins and Nylon as Denture Base Material in Beverages

Staining of prosthodontic materials may result in patient dissatisfaction and additional expense for replacement. This study aimed to determine the color stability of two heat-cured denture base acrylic (Lucitone 550, Vipi Cril) and one nylon denture base resin (Transflex) after immersion in beverages. Forty disks of each resin (20.0-mm diameter, 3.0-mm thick) were prepared and stored in distilled water for 24 hours at 37°C. During that time (T(0) ), the color of all specimens was spectrophotometrically measured. Each specimen was immersed in coffee, cola, red wine, and distilled water as a means of control. After 15-day (T(1) ) and 30-day (T(2) ) periods of immersion, the color of the specimens was measured again. The CIE (Commission Internationale de L' Eclairage) L*a*b* system was used to determine mean ΔE (color changes) values for each material and compared statistically with two-way ANOVA and Bonferroni intervals at 0.95. In ΔET(0) T(1) and ΔET(0) T(2) the most severe staining was apparent with red wine (p < 0.001), followed by coffee (p < 0.01), when compared to the specimens stored in distilled water. Transflex also showed significant color change after immersion in cola (p < 0.01). In ΔET(1) T(2) only red wine promoted significant staining of all resins (p < 0.0001). Chromatic changes were exhibited by specimens immersed in red wine, followed by coffee. For Transflex, cola also promoted color changes. The values of color changes converted to National Bureau of Standard units showed them to be perceivable to the human eye.

Prosthesis Auricular With Osseointegrated Implants and Quality of Life

Implants in craniofacial reconstructions improve prostheses retention and stability, comfort, and safety for the patient. According to biomechanical principles, the treatment success regarding osseointegration maintenance depends on an adequate surgery technique associated to a retention system that provides favorable tension distribution to implants. Implants in the mastoid area are a very important aid for retention of auricular prostheses. Color stability of resin and silicone is an important factor for longevity of auricular prostheses, and the high degree of satisfaction of patients with head and neck defects receiving epithesial reconstruction in the maxillofacial region is demonstrated.

A Method of Predicting Color Stability of Autopolymerizing Acrylic Resins Using Electron Spin Resonance.

Synopsis. Long periods can be required to determine the color stability of acrylic resins. The concentration of propagating radicals with unpigmented experimental resins (UER) and initiator solution (IS) of two initiator systems (binary and ternary) and five products were measured using electron spin resonance (ESR). The radical concentration was estimated from the area under the integrated ESR spectrum. The discoloration was measured using a color computer. Higher content of benzoylperoxide led to higher radical concentrations. The radical concentration for the ternary system increased slightly with time, but were lower than those of the binary system. Significant positive correlations were found between the radical concentration and delta E*ab for UER (r = 0.900, p < 0.01), IS (r = 0.953, p < 0.001) and the products (r = 0.808, p < 0.05). It was suggested that the color stability of these resins was predictable by measuring the radical concentration using ESR.