Collagen Scaffolds Research Articles

Urinary proteomic signature of mineralocorticoid receptor antagonism by spironolactone: evidence from the HOMAGE trial

Abstract Background Heart failure (HF) is characterised by collagen deposition. Urinary proteomic profiling (UPP) detects many sequenced peptides, for >70% derived from collagens. Purpose UPP and serum fibrosis markers were analysed together in patients at risk of HF with as objective to generate insights into the antifibrotic action of spironolactone. Methods In the open-label HOMAGE trial, patients were randomised to usual therapy combined or not with spironolactone 25-50 mg/d and followed for 9 months (n=290; 23.8% women; median age: 73 years). UPP was done by capillary electrophoresis coupled with mass spectrometry; 1498 urinary peptides with detectable signal in ≥30% of patients were analysed. Serum markers of COL1A1 synthesis (PICP and PICP/CITP) were measured. After rank normalisation of the biomarker distributions, between-group differences in their changes were assessed by multivariable-adjusted models. Correlations between the changes in urinary peptides and in serum PICP and PICP/CITP were compared between groups using Fisher Z transform. Results Among all the urinary peptides, only the changes in collagen fragments remained significantly different (p<0.05) between randomisation groups after accounting for baseline levels, covariables and multiple testing. Compared to the control group, spironolactone reduced 16 of 27 collagen-derived urinary peptides. From baseline to 9 months, serum PICP and the PICP/CITP ratio decreased from 79.0 to 75.4 µg/L and from 21.3 to 18.3, respectively (p≤0.0129), reflecting decreased COL1A1 synthesis. Spironolactone did not affect the correlations between changes in urinary COL1A1 fragments and the serum fibrosis markers. Conclusions Spironolactone downregulated urinary collagen-derived peptides, probably by shrinking the body-wide pool of collagens. Spironolactone did not affect the interaction between urinary and serum fibrosis markers, suggesting that collagen scaffolding is maintained, thereby explaining why some urinary collagen fragments increased. Combining urinary and serum fibrosis biomarkers opens new avenues for discovery of antifibrotic drugs and refines insight in the action of antifibrotic drugs.Figure 1Figure 2

Bioprinting PDLSC-Laden Collagen Scaffolds for Periodontal Ligament Regeneration.

Periodontitis and severe trauma are major causes of damage to the periodontal ligament (PDL). Repairing the native conditions of the PDL is essential for the stability of the tissue and its interfaces. Bioprinting periodontal ligament stem cells (PDLSCs) is an interesting approach to guide the regeneration of PDL and interfacial integration. Herein, a collagen-based bioink mimicking the native extracellular matrix conditions and carrying PDLSCs was tested to guide the periodontal ligament organization. The bioink was tested at two different concentrations (10 and 15 mg/mL) and characterized by swelling and degradation, microstructural organization, and rheological properties. The biological properties were assessed after loading PDLSCs into bioinks for bioprinting. The characterization was performed through cell viability, alizarin red assay, and expression for ALP, COL1A1, RUNX2, and OCN. The in vivo biocompatibility of the PDLSC-laden bioinks was verified using subcutaneous implantation in mice. Later, the ability of the bioprinted PDLSC-laden bioinks on dental root fragments to form PDL was also investigated in vivo in mice for 4 and 10 weeks. The bioinks demonstrated typical shear-thinning behavior, a porous microstructure, and stable swelling and degradation characteristics. Both concentrations were printable and provided suitable conditions for a high cell survival, proliferation, and differentiation. PDLSC-laden bioinks demonstrated biocompatibility in vivo, and the bioprinted scaffolds on the root surface evidenced PDLSC alignment, organization, and PDLSC migration to the root surface. The versatility of collagen-based bioinks provides native ECM conditions for PDLSC proliferation, alignment, organization, and differentiation, with translational applications in bioprinting scaffolds for PDL regeneration.

An innovative 4D printing approach for fabrication of anisotropic collagen scaffolds

Collagen anisotropy is known to provide the essential topographical cues to guide tissue-specific cell function. Recent work has shown that extrusion-based printing using collagenous inks yield 3D scaffolds with high geometric precision and print fidelity. However, these scaffolds lack collagen anisotropy. In this study, extrusion-based 3D printing was combined with a magnetic alignment approach in an innovative 4D printing scheme to generate 3D collagen scaffolds with high degree of collagen anisotropy. Specifically, the 4D printing process parameters-collagen (Col):xanthan gum (XG) ratio (Col:XG; 1:1, 4:1, 9:1 v/v), streptavidin-coated magnetic particle concentration (SMP; 0, 0.2, 0.4 mg ml-1), and print flow speed (2, 3 mm s-1)-were modulated and the effects of these parameters on rheological properties, print fidelity, and collagen alignment were assessed. Further, the effects of collagen anisotropy on human mesenchymal stem cell (hMSC) morphology, orientation, metabolic activity, and ligamentous differentiation were investigated. Results showed that increasing the XG composition (Col:XG 1:1) enhanced ink viscosity and yielded scaffolds with good print fidelity but poor collagen alignment. On the other hand, use of inks with lower XG composition (Col:XG 4:1 and 9:1) together with 0.4 mg ml-1SMP concentration yielded scaffolds with high degree of collagen alignment albeit with suboptimal print fidelity. Modulating the print flow speed conditions (2 mm s-1) with 4:1 Col:XG inks and 0.4 mg ml-1SMP resulted in improved print fidelity of the collagen scaffolds while retaining high level of collagen anisotropy. Cell studies revealed hMSCs orient uniformly on aligned collagen scaffolds. More importantly, collagen anisotropy was found to trigger tendon or ligament-like differentiation of hMSCs. Together, these results suggest that 4D printing is a viable strategy to generate anisotropic collagen scaffolds with significant potential for use in tendon and ligament tissue engineering applications.

Calcium Carbonate Microspheres Loaded the Iron and Selenopeptide Conjugate with Human-Like Collagen Scaffold for Skin Filling and Gastric Cancer Therapy

Calcium Carbonate Microspheres Loaded the Iron and Selenopeptide Conjugate with Human-Like Collagen Scaffold for Skin Filling and Gastric Cancer Therapy

Shaping the mechanical properties of a gelatin hydrogel interface via amination.

Injuries to musculoskeletal interfaces, such as the tendon-to-bone insertion of the rotator cuff, present significant physiological and clinical challenges for repair due to complex gradients of structure, composition, and cellularity. Advances in interface tissue engineering require stratified biomaterials able to both provide local instructive signals to support multiple tissue phenotypes while also reducing the risk of strain concentrations and failure at the transition between dissimilar materials. Here, we describe adaptation of a thiolated gelatin (Gel-SH) hydrogel via selective amination of carboxylic acid subunits on the gelatin backbone. The magnitude and kinetics of HRP-mediated primary crosslinking and carbodiimide-mediated secondary crosslinking reactions can be tuned through amination and thiolation of carboxylic acid subunits on the gelatin backbone. We also show that a stratified biomaterial comprised of mineralized (bone-mimetic) and non-mineralized (tendon-mimetic) collagen scaffold compartments linked by an aminated Gel-SH hydrogel demonstrate improved mechanical performance and reduced strain concentrations. Together, these results highlight significant mechanical advantages that can be derived from modifying the gelatin macromer via controlled amination and thiolation and suggest an avenue for tuning the mechanical performance of hydrogel interfaces within stratified biomaterials.

Crosstalk between macrophages and mesenchymal stem cells shape patterns of osteogenesis and immunomodulation in mineralized collagen scaffolds

Mesenchymal stem cells (MSCs) are highly plastic, with the capacity to differentiate into a spectrum of tissue-specific stromal cells. In the field of bone regeneration, MSCs have largely been considered for their osteogenic differentiation capacity. MSCs are increasingly being appreciated for their immunomodulatory potential following exposure to pro-inflammatory stimuli (licensing). Pro-inflammatory environments arise following bone injury via activation of resident immune cells like macrophages. We describe the use of a mineralized collagen scaffold as a bone-mimetic in vitro model to study the influence of paracrine versus direct cell-to-cell contact of THP-1 macrophages on MSC osteogenic and immunomodulatory potential. Paracrine stimuli from macrophages enhance MSC osteogenic and immunomodulatory potential via upregulation of key transcriptomic markers as well as via soluble biomolecule production. Direct co-culture of MSCs and macrophages decreased immunomodulatory potential in MSCs, especially for licensed MSCs, but enhanced matrix remodeling and expression of genes related to macrophage chemotaxis. These data demonstrate the significant effect macrophage-derived paracrine factors and direct contact have on MSC activity in a biomaterial model of bone regeneration. This work illuminates a critical need to further understand these processes in more clinically relevant cell models to inform biomaterial design.

Cancer epithelial cells participate in the self-organization of lung tumor spheroids. A morphological approach.

The tumor microenvironment is known to play an important role in tumor progression. However, the specific mechanisms underlying this process are still not known in detail and more research is needed on the elements that control tumor progression in lung cancer. In this work, we aimed to investigate the involvement of epithelial and stromal cancer cells in growth, cell migration and epithelial-to-mesenchymal transition (EMT) in a 3D in vitro model consisting of cell spheroids cultured in a type I collagen scaffold. Spheroids were manufactured using different combinations of epithelial cells, particularly H460 and H1792 cell lines, with cancer-associated fibroblasts (CAFs) and normal fibroblasts (NFs), both isolated from adenocarcinoma patients. We evaluated the morphology of the spheroids by analysis of F-actin and pankeratin with confocal microscopy. We determined the ultrastructure of cells in the spheroids by transmission electron microscopy and the expression of CDH1, CDH2 and VIM by RT-PCR. We observed that, on the one hand, the type of epithelial cell influences the morphology of spheroids. Stromal cells stimulated spheroid growth and cell dissemination through the collagen matrix, either alone or organized in branches with a nucleus of epithelial cells preceded by fibroblast cells. They also induced the appearance of new cell groups in the scaffold and the presence of EMT markers. The results presented here indicate the participation of both epithelial and stromal cells in the control of spheroid self-organization. The experimental model proposed here, although preliminary, is useful for the study of some aspects related to tumor progression in lung cancer.

Engineering Shape to Overcome Contraction: The Role of Polymer-Collagen Hybrids in Advanced Dermal Substitutes.

Collagen gels are the standard dermal equivalents par excellence, however the problem of rapid cell-mediated contraction remains unresolved. Therefore, the development of hybrid constructs (HCs) based on collagen and polymeric scaffolds is proposed to address the mechanical instability that usually limits the formation of new, functional tissue. Equally important, these synthetic structures should be temporary (degradable) while ensuring that cells are well-adapted to the new extracellular environment. In this study, we screened a library of scaffolds made of various polymers, including homopolymers of polycaprolactone (PCL) and poly D,L-lactide (PLA50), their blends (PCL/PLA50), and copolymers (poly(D,L-lactide-co-caprolactone), PCLLA50) to prepare HCs in a layer-by-layer fashion. The properties of polymers and copolymers along with their processability by electrospinning and 3D-printing were evaluated. Then, we assessed the HCs resistance toward cell-mediated contraction as well as the degradation of the polymeric scaffolds. Our results indicate that scaffolds with higher PLA50 content (e.g., PLA50 100%, PCL/PLA50 or PCLLA50, both at 50/50 caprolactone-to-D,L-lactide molar ratio) presented more drawbacks in terms of handleability and processing, while those with greater PCL presence showed structural steadiness and ease to use. All the scaffolds integrated well with the collagen gel to form the corresponding HCs. With few exceptions, the HCs demonstrated good resistance to cell-derived contraction over 3 weeks. Notably, HCs based on PCLLA50 90/10 (both versions, electrospun or 3D-printed) performed best, showing only a 5%-17% area reduction compared to the 93% observed in collagen-only gels. This copolymer displayed hydrolytic degradation depending on its shape, with up to 45% and 65% loss of molecular weight for the electrospun and 3D-printed forms, respectively, correlating with their progressive change in mechanical features. HCs containing PCLLA50 90/10 also exhibited a better fibroblast distribution, enhanced myofibroblastic differentiation, and a three-fold increase in cell proliferation (when the electrospun type was used) compared to collagen controls. These findings were instrumental in selecting a potential HC that might be used for future experiments in vivo.

Proanthocyanidins modification of the mineralized collagen scaffold based on synchronous self-assembly/mineralization for bone regeneration

Proteoglycans (PG) is crucial for regulating collagen formation and mineralization during bone tissue development. A wide variety of PG-modified collagen scaffolds have been proposed for bone engineering application to promote biological responses and work as artificial matrices that guide tissue regeneration. However, poor performance of theses biomaterials against infections has led to an unmet need for clinical prevention. Therefore, we utilized proanthocyanidins (PA) to simulate the functions of PG, including mediating the collagen assembly and intrafibrillar mineralization, to optimize scaffolds performance. The excellent antibacterial properties of PA can endow the scaffolds with anti-infection effects in the process of tissue regeneration. When PA was added during fibrillogenesis, the collagen fibrils appeared irregular aggregation and the mineralization degree was reduced. In contrast, the addition of PA after collagen self-assembly improved the latter’s ability to act as a deposition template and remarkably promoted mineral ions infiltration, thus enhancing intrafibrillar mineralization. The PA-modified scaffold displayed a highly hydrophilicity behaviour and long-term resistance to degradation. The sustained release of PA effectively inhibited the activity of Staphylococcus aureus. The scaffold also showed excellent biocompatibility and improved bone regeneration in calvarial critical-size defect models. The application of PA enables a dual-function scaffold with favourable intrafibrillar mineralization and anti-bacterial properties for bone regeneration.

The comparison of eight different common in vitro and ex vivo environments with in vivo conditions applying model collagen samples: correlation possibilities and their limits

New biomaterials are routinely evaluated for their degradation behaviour in the real body environment. Following the 3R strategy, in vitro simulated body conditions are often preferred. No studies that simultaneously compare such conditions with the real body environment have been conducted to date. Model porous collagen scaffolds were exposed for 21 days to eight different environments: simple salt-based and enzymatic media, human blood plasma, cell culture media with and without human fibroblasts and ex vivo model cortical bone, and subsequently compared with an in vivo environment represented by a pig peritoneum. The mechanical properties of the scaffolds were then determined via uniaxial compression testing, and the structural properties via the micro-CT, weight loss, infrared spectroscopy, X-ray diffraction and histological methods. Interestingly, the various analysed simulated body conditions caused differing alterations in the collagen scaffold characteristics when compared with the real body environment. The mechanical properties were similar during the first 7 days of incubation but diverged after 14 and 21 days. The structural properties varied significantly after just 7 days of incubation. The histological evaluation of the scaffolds exposed to the cellular, ex vivo and in vivo conditions revealed the poor ability of cells to completely populate the scaffolds, accompanied by the massive ingrowth of connective tissue into the in vivo exposed scaffolds, which resulted in their variable global behaviour. In conclusion, the value of in vitro simulated body environments lies in their screening capacity and feasibility; however, direct extrapolation to real body conditions needs to be verified going forward.

Radial Egg White Hydrogel Releasing Extracellular Vesicles for Cell Fate Guidance and Accelerated Diabetic Skin Regeneration.

Topology and bioactive molecules are crucial for stimulating cellular and tissue functions. To regulate the chronic wound microenvironment, mono-assembly technology is employed to fabricate a radial egg white hydrogel loaded with lyophilized adipose tissue-extracellular vesicles (radial EWH@L-EVs). The radial architecture not only significantly modified the gene expression of functional cells, but also achieved directional and controlled release kinetics of L-EVs. Through the synergy of topographical and inherent bioactive cues, radial EWH@L-EVs effectively reduced intracellular oxidative stressand promoted the polarization of macrophages toward an anti-inflammatory phenotype during the inflammatory phase. Afterward, radial EWH@L-EVs facilitated the centripetal migration and proliferation of fibroblasts and endothelial cells as the wound transitioned to the proliferative phase. During the latter remodeling phase, radial EWH@L-EVs accelerated the regeneration of granulation tissue, angiogenesis, and collagen deposition, thereby promoting the reorganization chronic wound. Compared with the gold standard collagen scaffold, radial EWH@L-EVs actively accommodated the microenvironment via various functions throughout all stages of diabetic wound healing. This can be attributed to the orientation of topological structures and bioactive molecules, which should be considered of utmost importance in tissue engineering.

Sclerostin Antibody-Loaded Dense Collagen Hydrogels Promote Critical-Size Bone Defect Repair.

The management of extensive bone loss remains a clinical challenge. Numerous studies are underway to develop a combination of biomaterials, biomolecules, and stem cells to address this challenge. In particular, the systemic administration of antibodies against sclerostin, a regulator of bone formation, was recently shown to enhance the bone repair efficiency of dense collagen hydrogels (DCHs) hosting murine dental pulp stem cells (mDPSCs). The aim of the present study was to assess whether these antibodies, encapsulated and released from DCHs, could promote craniofacial bone repair by the local inhibition of sclerostin. In vitro studies showed that antibody loading modified neither the hydrogel structure nor the viability of seeded mDPSCs. When implanted in a mouse calvaria critical-size bone defect, antibody-loaded DCHs showed repair capabilities similar to those of acellular unloaded DCHs combined with antibody injections. Importantly, the addition of mDPSCs provided no further benefit. Altogether, the local delivery of antisclerostin antibodies from acellular dense collagen scaffolds is highly effective for bone repair. The drastic reduction in the required amount of antibody compared to systemic injection should reduce the cost of the procedure, making the strategy proposed here a promising therapeutic approach for large bone defect repair.

Graphene Oxide/Black Phosphorus Functionalized Collagen Scaffolds with Enhanced Near-Infrared Controlled In Situ Biomineralization for Promoting Infectious Bone Defect Repair through PI3K/Akt Pathway.

Infectious bone defects resulting from surgery, infection, or trauma are a prevalent clinical issue. Current treatments commonly used include systemic antibiotics and autografts or allografts. Nevertheless, therapies come with various disadvantages, including multidrug-resistant bacteria, complications arising from the donor site, and immune rejection, which makes artificial implants desirable. However, artificial implants can fail due to bacterial infections and inadequate bone fusion after implantation. Thus, the development of multifunctional bone substitutes that are biocompatible, antibacterial, osteoconductive, and osteoinductive would be of great clinical importance. This study designs and prepares 2D graphene oxide (GO) and black phosphorus (BP) reinforced porous collagen (Col) scaffolds as a viable strategy for treating infectious bone defects. The fabricated Col-GO@BP scaffold exhibited an efficient photothermal antibacterial effect under near-infrared (NIR) irradiation. A further benefit of the NIR-controlled degradation of BP was to promote biomineralization by phosphorus-driven and calcium-extracted phosphorus in situ. The abundant functional groups in GO could synergistically capture the ions and enhance the in situ biomineralization. The Col-GO@BP scaffold facilitated osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSC) by leveraging its mild photothermal effect and biomineralization process, which upregulated heat shock proteins (HSPs) and activated PI3K/Akt pathways. Additionally, systematic in vivo experiments demonstrated that the Col-GO@BP scaffold obviously promotes infectious bone repair through admirable photothermal antibacterial performance and enhanced vascularization. As a result of this study, we provide new insights into the photothermal activity of GO@BP nanosheets, their degradation, and a new biological application for them.

P2Y12-targeted modulation of microglial phenotypes: A novel therapeutic strategy for enhanced axonal regeneration post-spinal cord injury

AimsMicroglia activation after spinal cord injury (SCI) is a double-edged sword, modulation of the activated microglia populations toward pro-regenerative phenotypes highlights the potential therapeutic implications. P2Y12, a microglia-specific marker, remains underexplored in its capacity to polarize microglial activation populations in SCI repair. We aimed to explore the effects of modulating P2Y12 on microglia function after spinal cord injury, and further on axonal regeneration and motor recovery after spinal cord injury. Materials and methodsThe study employed both in vitro and in vivo models, using BV2 cells and a mouse model of SCI, respectively. Ticagrelor, a P2Y12 antagonist, was administered via a collagen scaffold to ensure stable and sustained release. Transcriptome sequencing analysis, immunofluorescence staining, and Basso Mouse Scale (BMS) scores were used to assess microglial activation, axonal regeneration, and functional recovery. Key findingsHerein, we observed P2Y12+ microglia localized predominantly at the lesion periphery within 3 days post injury (dpi), manifesting a pro-inflammatory phenotype, but not anti-inflammatory phenotype. In vitro investigations revealed that P2Y12 inhibition of the activated microglia curtailed pro-inflammatory differentiation while augmenting anti-inflammatory differentiation. SignificanceLeveraging this insight, we engineered a collagen scaffold-based delivery system for sustained release of the P2Y12 antagonist, ticagrelor, at the injury site in a mouse complete SCI model. Notably, P2Y12 suppression markedly enhanced axonal regeneration within the injured site and ameliorated lower limb motor functions in SCI mice. Collectively, our findings illuminate P2Y12-targeted microglial modulation as a promising therapeutic approach for SCI.

A Review on Dermal Wound Repair and Regeneration Using Antimicrobial-Loaded Microspheres Incorporated into Bovine Collagen Scaffold

In this paper, the developed microsphere-incorporated collagen scaffold presents a promising solution for delivering drugs over wound surfaces in a uniform and sustained manner. The biomaterials utilized in this system are of natural origin, minimizing potential toxicity from core materials, and collagen and gelatin exhibit active wound-healing properties. The collagen scaffold used for the delivery device offers several advantages, including minimizing dressing frequency, facilitating easier examination, and providing added aesthetic value. Furthermore, the protein-based biomaterial scaffold acts as a template for the extracellular matrix in the skin, enhancing the maturation of wounds and enabling the transition to the accelerated production of mature and aligned collagen fibers. The controlled release of antimicrobial drugs through denatured collagens and gelatin microspheres, as well as the efficient healing observed in in vivo studies, demonstrate the potential of this system for effective wound care. Overall, the incorporation of ciprofloxacin-loaded microspheres in porous collagen scaffold offers sustained releases of ciprofloxacin in infected environments, as supported by histological examination showing well-formed epidermis and dermis in the connective tissue of the skin. The system’s ability to heal full-thickness wounds within a significantly shorter time frame compared to antibiotic-incorporated collagen sponges further emphasizes its efficacy in wound healing.

Bioinspired Collagen Scaffold Loaded with bFGF-Overexpressing Human Mesenchymal Stromal Cells Accelerating Diabetic Skin Wound Healing via HIF-1 Signal Pathway Regulated Neovascularization.

The healing of severe chronic skin wounds in chronic diabetic patients is still a huge clinical challenge due to complex regeneration processes and control signals. Therefore, a single approach is difficult in obtaining satisfactory therapeutic efficacy for severe diabetic skin wounds. In this study, we adopted a composite strategy for diabetic skin wound healing. First, we fabricated a collagen-based biomimetic skin scaffold. The human basic fibroblast growth factor (bFGF) gene was electrically transduced into human umbilical cord mesenchymal stromal cells (UC-MSCs), and the stable bFGF-overexpressing UC-MSCs (bFGF-MSCs) clones were screened out. Then, an inspired collagen scaffold loaded with bFGF-MSCs was applied to treat full-thickness skin incision wounds in a streptozotocin-induced diabetic rat model. The mechanism of skin damage repair in diabetes mellitus was investigated using RNA-Seq and Western blot assays. The bioinspired collagen scaffold demonstrated good biocompatibility for skin-regeneration-associated cells such as human fibroblast (HFs) and endothelial cells (ECs). The bioinspired collagen scaffold loaded with bFGF-MSCs accelerated the diabetic full-thickness incision wound healing including cell proliferation enhancement, collagen deposition, and re-epithelialization, compared with other treatments. We also showed that the inspired skin scaffold could enhance the in vitro tube formation of ECs and the early angiogenesis process of the wound tissue in vivo. Further findings revealed enhanced angiogenic potential in ECs stimulated by bFGF-MSCs, evidenced by increased AKT phosphorylation and elevated HIF-1α and HIF-1β levels, indicating the activation of HIF-1 pathways in diabetic wound healing. Based on the superior biocompatibility and bioactivity, the novel bioinspired skin healing materials composed of the collagen scaffold and bFGF-MSCs will be promising for healing diabetic skin wounds and even other refractory tissue regenerations. The bioinspired collagen scaffold loaded with bFGF-MSCs could accelerate diabetic wound healing via neovascularization by activating HIF-1 pathways.

Enabling 3D bioprinting of cell-laden pure collagen scaffolds via tannic acid supporting bath.

The fabrication of cell-laden biomimetic scaffolds represents a pillar of tissue engineering and regenerative medicine (TERM) strategies, and collagen is the gold standard matrix for cells to be. In the recent years, extrusion 3D bioprinting introduced new possibilities to increase collagen scaffold performances thanks to the precision, reproducibility, and spatial control. However, the design of pure collagen bioinks represents a challenge, due to the low storage modulus and the long gelation time, which strongly impede the extrusion of a collagen filament and the retention of the desired shape post-printing. In this study, the tannic acid-mediated crosslinking of the outer layer of collagen is proposed as strategy to enable collagen filament extrusion. For this purpose, a tannic acid solution has been used as supporting bath to act exclusively as external crosslinker during the printing process, while allowing the pH- and temperature-driven formation of collagen fibers within the core. Collagen hydrogels (concentration 2-6mg/mL) were extruded in tannic acid solutions (concentration 5-20mg/mL). Results proved that external interaction of collagen with tannic acid during 3D printing enables filament extrusion without affecting the bulk properties of the scaffold. The temporary collagen-tannic acid interaction resulted in the formation of a membrane-like external layer that protected the core, where collagen could freely arrange in fibers. The precision of the printed shapes was affected by both tannic acid concentration and needle diameter and can thus be tuned. Altogether, results shown in this study proved that tannic acid bath enables collagen bioprinting, preserves collagen morphology, and allows the manufacture of a cell-laden pure collagen scaffold.

Freeze-dried porous collagen scaffolds for the repair of volumetric muscle loss injuries.

Volumetric muscle loss (VML) injuries are characterized by the traumatic loss of skeletal muscle resulting in permanent damage to both tissue architecture and electrical excitability. To address this challenge, we previously developed a 3D aligned collagen-glycosaminoglycan (CG) scaffold platform that supported in vitro myotube alignment and maturation. In this work, we assessed the ability of CG scaffolds to facilitate functional muscle recovery in a rat tibialis anterior (TA) model of VML. Functional muscle recovery was assessed following implantation of either non-conductive CG or electrically conductive CG-polypyrrole (PPy) scaffolds at 4, 8, and 12 weeks post-injury by in vivo electrical stimulation of the peroneal nerve. After 12 weeks, scaffold-treated muscles produced maximum isometric torque that was significantly greater than non-treated tissues. Histological analysis further supported these reparative outcomes with evidence of regenerating muscle fibers at the material-tissue interface in scaffold-treated tissues that was not observed in non-repaired muscles. Scaffold-treated muscles possessed higher numbers of M1 and M2 macrophages at the injury while conductive CG-PPy scaffold-treated muscles showed significantly higher levels of neovascularization as indicated by the presence of pericytes and endothelial cells, suggesting a persistent wound repair response not observed in non-treated tissues. Finally, only tissues treated with non-conductive CG scaffolds displayed neurofilament staining similar to native muscle, further corroborating isometric contraction data. Together, these findings show that CG scaffolds can facilitate improved skeletal muscle function and endogenous cellular repair, highlighting their potential use as therapeutics for VML injuries.

Engineered pre-dentin with well-aligned hierarchical mineralized collagen fibril bundles promote bio-root regeneration

Stem cell-mediated bio-root regeneration is an alternative tooth replacement strategy; however, physiologically functional bio-root regeneration with distinctive dentin structure remains challenging. In this study, the distinct arrangements of collagen fibril bundles were identified that account for hierarchical structural differences between dentin, cementum, and alveolar bone. Thus, an “engineered pre-dentin” was fabricated, which was a dentin hierarchical structure mimicking collagen (MC) scaffold, with well-aligned hierarchical mineralized collagen fibril bundles. The results revealed that it has a stronger effect on promoting biological root regeneration in nude mice and miniature pigs with dental pulp stem cell (DPSC) and periodontal ligament stem cell (PDLSC) sheets compared to hydroxyapatite tricalcium phosphate (HA/TCP). The success rate in the MC group was also higher than that in the HA/TCP group (67% and 33%, respectively). In conclusion, the hierarchical dentin-mimicking scaffold can enhance the regeneration of bio-roots, which provides a promising strategy for tooth regeneration.

Collagen-Heparin-FGF2-VEGF Scaffolds Induce a Regenerative Gene Expression Profile in a Fetal Sheep Wound Model.

The developmental abnormality spina bifida is hallmarked by missing tissues (e.g. skin) and exposure of the spinal cord to the amniotic fluid, which can negatively impact neurological development. Surgical closure of the skin in utero limits neurological damage, but in large defects this results in scarring and contractures. Stimulating skin regeneration in utero would greatly benefit treatment outcome. Previously, we demonstrated that a porous type I collagen (COL) scaffold, functionalized with heparin (HEP), fibroblast growth factor 2 (FGF2) and vascular endothelial growth factor (VEGF) (COL-HEP/GF) improved pre- and postnatal skin regeneration in a fetal sheep full thickness wound model. In this study we uncover the early events associated with enhanced skin regeneration. We investigated the gene expression profiles of healing fetal skin wounds two weeks after implantation of the COL(-HEP/GF) scaffolds. Using laser dissection and microarrays, differentially expressed genes (DEG) were identified in the epidermis and dermis between untreated wounds, COL-treated wounds and wounds treated with COL-HEP/GF. Biological processes were identified using gene enrichment analysis and DEG were clustered using protein-protein-interaction networks. COL-HEP/GF influences various interesting biological processes involved in wound healing. Although the changes were modest, using protein-protein-interaction networks we identified a variety of clustered genes that indicate COL-HEP/GF induces a tight but subtle control over cell signaling and extracellular matrix organization. These data offer a novel perspective on the key processes involved in (fetal) wound healing, where a targeted and early interference during wound healing can result in long-term enhanced effects on skin regeneration.