ColE1-type Replicon Research Articles

Characterization of the diverse plasmid pool harbored by the blaNDM-1-containing Acinetobacter bereziniae HPC229 clinical strain.

Acinetobacter bereziniae is an environmental microorganism with increasing clinical incidence, and may thus provide a model for a bacterial species bridging the gap between the environment and the clinical setting. A. bereziniae plasmids have been poorly studied, and their characterization could offer clues on the causes underlying the leap between these two different habitats. Here we characterized the whole plasmid content of A. bereziniae HPC229, a clinical strain previously reported to harbor a 44-kbp plasmid, pNDM229, conferring carbapenem and aminoglycoside resistance. We identified five extra plasmids in HPC229 ranging from 114 to 1.3 kbp, including pAbe229-114 (114 kbp) encoding a MOBP111 relaxase and carrying heavy metal resistance, a bacteriophage defense BREX system and four different toxin-antitoxin (TA) systems. Two other replicons, pAbe229-15 (15.4 kbp) and pAbe229-9 (9.1 kbp), both encoding MOBQ1 relaxases and also carrying TA systems, were found. The three latter plasmids contained Acinetobacter Rep_3 superfamily replication initiator protein genes, and functional analysis of their transfer regions revealed the mobilizable nature of them. HPC229 also harbors two smaller plasmids, pAbe229-4 (4.4 kbp) and pAbe229-1 (1.3 kbp), the former bearing a ColE1-type replicon and a TA system, and the latter lacking known replication functions. Comparative sequence analyses against deposited Acinetobacter genomes indicated that the above five HPC229 plasmids were unique, although some regions were also present in other of these genomes. The transfer, replication, and adaptive modules in pAbe229-15, and the stability module in pAbe229-9, were bordered by sites potentially recognized by XerC/XerD site-specific tyrosine recombinases, thus suggesting a potential mechanism for their acquisition. The presence of Rep_3 and ColE1-based replication modules, different mob genes, distinct adaptive functions including resistance to heavy metal and other environmental stressors, as well as antimicrobial resistance genes, and a high content of XerC/XerD sites among HPC229 plasmids provide evidence of substantial links with bacterial species derived from both environmental and clinical habitats.

Antibiotic resistance due to an unusual ColE1-type replicon plasmid in Aeromonas salmonicida.

Aeromonas salmonicida subsp. salmonicida is a fish pathogen known to have a rich plasmidome. In the present study, we discovered an isolate of this bacterium bearing an additional unidentified small plasmid. After having sequenced the DNA of that isolate by next-generation sequencing, it appeared that the new small plasmid is a ColE1-type replicon plasmid, named here pAsa7. This plasmid bears a functional chloramphenicol-acetyltransferase-encoding gene (cat-pAsa7) previously unknown in A. salmonicida and responsible for resistance to chloramphenicol. A comparison of pAsa7 with pAsa2, the only known ColE1-type replicon plasmid usually found in A. salmonicida subsp. salmonicida, revealed that even if both plasmids share a high structural similarity, it is still unclear if pAsa7 is a derivative of pAsa2 since they showed several mutations at the nucleotide level. Transcriptomic analysis revealed that the cat-pAsa4 gene, another chloramphenicol-acetyltransferase-encoding gene, found on the large plasmid pAsa4, was significantly more transcribed than cat-pAsa7. This was correlated with a higher chloramphenicol resistance for isolates bearing pAsa4 compared with the one having pAsa7. Finally, a phylogenetic analysis showed that both CAT-pAsa4 and CAT-pAsa7 proteins were in different clusters. The clustering was supported by the identity of residues involved in the catalytic site. In addition, to give a better understanding of the large drug-resistance panel of A. salmonicida, this study reinforces the hypothesis that A. salmonicida subsp. salmonicida is a considerable reservoir for mobile genetic elements such as plasmids.

Genetic analysis of maintenance of pEC156, a naturally occurring Escherichia coli plasmid that carries genes of the EcoVIII restriction–modification system

In the present study the role of the mechanisms responsible for maintenance of a natural plasmid pEC156, that carries genes of the EcoVIII restriction–modification system was investigated. Analysis of this plasmid's genetic content revealed the presence of genetic determinants suggesting two such mechanisms. The first of them relies on site specific recombination utilizing the Xer/cer molecular machinery, while the second involves a restriction–modification system as an addiction module. Our analysis indicated that three factors affect the maintenance of pEC156: (i) a cis-acting cer site involved in resolution of plasmid multimers, (ii) a gene coding for EcoVIII endonuclease, and (iii) plasmid copy number control. The lowest stability was observed with pEC156 derivatives deprived of the cer site. Decreased stability of pEC156 derivatives was also observed in E. coli strains deficient in genes coding for proteins involved in plasmid multimer resolution (XerC, XerD, ArgR and PepA). A similar effect, but to a much lesser extent was observed for the pEC156 derivative without a functional gene coding for EcoVIII endonuclease. Our results indicate that the presence of the cer site is more important for pEC156 stable maintenance than the presence of a functional gene coding for EcoVIII endonuclease. In our work we also tested maintenance of pEC156 possessing a ColE1-type replicon in bacteria belonging to Enterobacteriaceae family. We have found that pEC156 was most stably maintained in Enterobacter cloacae and Klebsiella oxytoca representing coli-type enterobacteria. We have found that in all enterobacteria tested pEC156 derivatives deficient in the cer site were significantly less stably maintained than cer+ variants.

Enhancement of ColE1-type replication promoted by the Gp alpha initiator protein of bacteriophage P4.

Gp alpha, the phage P4 specific replication protein, increases in vitro replication of pCN51, a pBR322 based replicon, by a factor of two. This effect is dependent on DNA polymerase I and requires transcription by host RNA polymerase. Electron microscopic analysis of replicating intermediates indicates that pCN51 replication occurred from the same origin and with the same directionality in the presence and in the absence of Gp alpha. These results reveal that Gp alpha can influence the replication of an heterologous replicon and show that this effect occurs in ColE1-type replicons without altering the normal pattern of initiation. Further analysis of replicating intermediates shows an increase in the average size of the ColE1-type replication 'bubble' obtained in the presence of Gp alpha. It is proposed that Gp alpha interacts with the ColE1 replisome complex at an early replication stage.

Chimeric nature of two plasmids of Hafnia alvei encoding the bacteriocins alveicins A and B.

The complete nucleotide sequences of two bacteriocin-encoding plasmids isolated from Hafnia alvei (pAlvA and pAlvB) were determined. Both plasmids resemble ColE1-type replicons and carry mobilization genes, as well as colicin-like bacteriocin operons. These bacteriocins appear to be chimeras consisting of translocation domains from Tol-dependent colicins, unique binding domains, and killing and immunity domains similar to those of the pore-forming colicin Ia. Just as is found for colicin Ia, these H. alvei bacteriocins (alveicins) lack lysis genes. The alveicins are unusually small at 408 and 358 amino acids for alveicin A and B, respectively, which would make alveicin B the smallest pore-forming bacteriocin yet discovered. The pattern of nucleotide substitution in the alveicins suggests that the dominant forces in the evolution of their killing domains and immunity genes are neutral mutation and random genetic drift rather than diversifying selection, which has been implicated in the evolution of other colicins. Five of six bacteriocinogenic isolates of H. alvei were found to carry plasmids identical to pAlvA. Comparisons of the levels of nucleotide divergence in five housekeeping genes to the levels of divergence in their respective plasmids led us to conclude that pAlvA is transferring laterally through the H. alvei population relatively rapidly.

Three small, cryptic plasmids from Aeromonas salmonicida subsp. salmonicida A449

The nucleotide sequences of three small (5.2–5.6 kb) plasmids from Aeromonas salmonicida subsp. salmonicida A449 are described. Two of the plasmids (pAsa1 and pAsa3) use a ColE2-type replication mechanism while the third (pAsa2) is a ColE1-type replicon. Insertions in the Rep protein and oriV region of the ColE2-type plasmids provide subtle differences that allow them to be maintained compatibly. All three plasmids carry genes for mobilization ( mobABCD), but transfer genes are absent and are presumably provided in trans. Two of the plasmids, pAsa1 and pAsa3, carry toxin–antitoxin gene pairs, most probably to ensure plasmid stability. One open reading frame (ORF), orf1, is conserved in all three plasmids, while other ORFs are plasmid-specific. A survey of A. salmonicida strains indicates that pAsa1 and pAsa2 are present in all 12 strains investigated, while pAsa3 is present in 11 and a fourth plasmid, pAsal1, is present in 7.

Characterization of pEC156, a ColE1-Type Plasmid from Escherichia coli E1585-68 That Carries Genes of the EcoVIII Restriction-Modification System

The complete 4312-bp sequence of the pEC156 plasmid from Escherichia coli E1585-68, which carries genes encoding the EcoVIII restriction-modification (R-M) system, an isoschizomer of HindIII from Haemophilus influenzae, has been determined. Two clustered and convergently oriented open reading frames, large enough to encode genes of the EcoVIII R-M system, were found. The transcriptional start points were mapped by the primer extension method. The relative molecular masses of the EcoVIII endonuclease and EcoVIII methyltransferase deduced from the nucleotide sequence are 35,554 and 33,910, respectively. Nucleotide sequence analysis of pEC156 suggests that this plasmid is a ColE1-type replicon. It consists of an origin of replication and two untranslated genes encoding RNA I and RNA II, both involved in the regulation of plasmid DNA replication. The replication region also contains the gene encoding a 64-aa Rom-like protein. Inactivation of the putative rom gene by insertion of a kanamycin-resistance cassette resulted in 4.5-fold increase in pEC156-derived plasmid copy number in E. coli cells. All of these elements (RNA I, RNA II, and rom) reveal a high level of similarity to ColE1 homologs. The replication of all ColE1-type plasmids is dependent on the activity of E. coli DNA polymerase I. It was shown that a pEC156 derivative (pIB8) carrying an antibiotic resistance gene indeed failed to replicate in an E. coli polA12(ts) mutant at 43°C, and its copy number was reduced in the E. coli pcnB80 mutant. These results prove that pEC156 is a ColE1-type replicon.

Isolation and Characterization of a ColE1-like Plasmid fromEnterobacter agglomeranswith a Novel Variant ofromGene

Complete nucleotide sequence of a plasmid isolated fromEnterobacter agglomeranshas been determined. The plasmid, called pPIGDM1, consists of 2495 base pairs. The analysis of its nucleotide sequence suggested that pPIGDM1 may be a ColE1-like replicon. We confirmed this hypothesis by constructing a pPIGDM1-derived plasmid harboring thecatgene (pBW4), which could be introduced intoEscherichia colicells, and demonstrating that pBW4 cannot replicate in the absence of thepolAfunction and that its copy number is significantly decreased in thepcnBmutant. Like some other ColE1-type replicons (e.g., pBR322), pPIGDM1-derived plasmids can be amplified both by chloramphenicol method and in isoleucine-starvedrelAmutants but not inrelA+bacteria. Inactivation of the putativeromgene by insertion of an ampicillin-resistance gene resulted in significant increase in pPIGDM1-derived plasmid copy number inE. colidespite the fact that amino acid sequence of the putative RNA I modulator (Rom) protein is only 55.7% identical to the ColE1 analog. The pPIGDM1-derivedrom-like coding sequence is also homologous to therom-like gene present in theProteus vulgarisplasmid pPvu1. We suggest to group all these gene products into a new family called ROMS (RNA one modulators). Since a pPIGDM1-derived plasmid is compatible with other ColE1-like replicons (pMB1-, p15A, RSF1030-, and CloDF13-derived) inE. coli,one may consider pPIGDM1 as a progenitor of new cloning vehicles compatible with most (if not all) of currently used plasmid vectors. Moreover, this plasmid may serve as a source of the newrom-like gene coding for a protein useful in investigation of RNA–protein interactions. A role for the pPIGDM1 plasmid in the host strain is not known.

Enhancement of ColE1-type replication promoted by the Gpα initiator protein of bacteriophage P4

Gpα, the phage P4 specific replication protein, increases in vitro replication of pCN51, a pBR322 based replicon, by a factor of two. This effect is dependent on DNA polymerase I and requires transcription by host RNA polymerase. Electron microscopic analysis of replicating intermediates indicates that pCN51 replication occurred from the same origin and with the same directionality in the presence and in the absence of Gpα. These results reveal that Gpα can influence the replication of an heterologous replicon and show that this effect occurs in ColE1-type replicons without altering the normal pattern of initiation. Further analysis of replicating intermediates shows an increase in the average size of the ColE1-type replication `bubble' obtained in the presence of Gpα. It is proposed that Gpα interacts with the ColE1 replisome complex at an early replication stage.

Transformation of Coxiella burnetii to ampicillin resistance.

A 5.8-kb chromosomal fragment isolated from Coxiella burnetii initiates plasmid replication in Escherichia coli and was characterized as an autonomous replication sequence, ars (M. Suhan, S.-Y. Chen, H.A. Thompson, T.A. Hoover, A. Hill, and J.C. Williams, J. Bacteriol. 176:5233-5243, 1994). In the present study, an ars replicon was used to transform C. burnetii to ampicillin resistance. Plasmid pSKO(+)1000 contained the C. burnetii ars sequence cloned into a ColE1-type replicon encoding beta-lactamase. pSKO(+)1000 was introduced into C. burnetii by electroporation. Ampicillin-resistant cells were selected, and survivors were examined for the transformed genotype by Southern hybridization. Transformants stably maintained the pSKO(+)1000 bla DNA sequence in the chromosome as a result of homologous recombination. The recombination event resulted in the duplication of the 5.8-kb ars sequence in the C. burnetii chromosome. The bla gene was also located in an episome. However, an ampicillin resistance plasmid lacking the C. burnetii ars sequence did not stably transform C. burnetii. A biological assay analyzing beta-lactamase activity of C. burnetii transformants during acid activation in vitro provided evidence for expression of the bla (beta-lactamase) gene.

A fourth class of theta-replicating plasmids: the pAM beta 1 family from gram-positive bacteria.

Plasmid pAM beta 1 from Enterococcus faecalis uses a unidirectional theta mode of replication. We show here that this replication (i) is dependent on a plasmid-encoded replication protein (Rep) but not on a DNA structure typical for origins of most Rep-dependent plasmids and (ii) is initiated by DNA polymerase I (PolI). pAM beta 1 minimal replicon shares no homology with highly conserved ColE1-type replicons, which use PolI for initiation but do not encode a Rep, or with ColE2 and ColE3 replicons, which require PolI for replication and encode a Rep. We propose that pAM beta 1 and a number of other naturally occurring and closely related plasmids from a distinct plasmid class.

Isolation of the replication DNA region from a Rhizobium plasmid and examination of its potential as a replicon for Rhizobiaceae cloning vectors

The DNA region essential for replication and stability of a native plasmid (pTM5) from Rhizobium sp. ( Hedysarum) has been identified and isolated within a 5.4-kb PstI restriction fragment. The isolation of this region was accomplished by cloning endonuclease-restricted pTM5 DNA into a ColE1-type replicon and selecting the recombinant plasmids containing the pTM5 replicator (pTM5 derivative plasmids) by their ability to replicate in Rhizobium. DNA homology studies revealed that pTM5-like replicons are present in cryptic plasmids from some Rhizobium sp. ( Hedysarum) strains but not in plasmids from strains of other Rhizobium species or Agrobacterium tumefaciens. The pTM5 derivative plasmids were able to replicate in Escherichia coli and A. tumefaciens and in a wide range of Rhizobium species. On the basis of stability assays in the absence of antibiotic selective pressure, the pTM5 derivative plasmids were shown to be highly stable in both free-living and symbiotic cells of Rhizobium sp. ( Hedysarum). The stability of these plasmids in other species of Rhizobium and in A. tumefaciens varied depending on the host and on the plasmid. Most pTM5 derivative plasmids tested showed significantly higher symbiotic stability than RK2 derivative plasmids pRK290 and pAL618 in Rhizobium sp. ( Hedysarum), R. meliloti, and R. leguminosarum bv. phaseoli. Consequently, we consider that the constructed pTM5 derivative plasmids are potentially useful as cloning vectors for Rhizobiaceae.

Molecular cloning of the plasmid RP4 primase region in a multi-host-range tacP expression vector

Plasmid RP4 primase was overproduced by utilizing autoregulated high-level expression vector systems in Escherichia coli and in four other Gram-negative bacterial species. Analysis of the products in E. coli revealed that in addition to the two primase polypeptides of 118 and 80 kDa the pri region of RP4 encodes two smaller proteins of 16.5 and 8.6 kDa. The transcript for the four RP4-specified products is polycistronic. The vector system used in E. coli is based on the plasmid pKK223–3 (Brosius and Holy, 1984), a ColE1-type replicon which contains a polylinker sequence flanked on one side by the controllable tac promoter and on the other side by two strong transcriptional terminators. The gene for the lac repressor ( lacI Q) was inserted to render the use of the plasmid independent from repressor-overproducing strains. The gene cartridge essential for high-level expression and selection was combined with the RSF1010 replicon to generate a vector plasmid functioning in a wide variety of Gram-negative hosts. The versatility of the vector family was extended by constructing derivatives that contain the polylinker in inverted orientation relative to the tac promoter. Therefore, the orientation of the cloned fragment can be chosen by ‘forced cloning’ into the appropriately selected vector.

Characterization of a mini-F plasmid derived from an F mutant expressing incompatibility in the autonomous but not in the integrated state

Plasmid DNA from Escherichia coli F′ ser/MA219 harboring an altered F′ factor, which expressed incompatibility in the autonomous but not in the integrated state ( DeVries and Maas, 1973, J. Bacteriol. 115, 213–220), was digested with the restriction endonuclease EcoRI and ligated to a nonreplicating trpED fragment. A miniplasmid was obtained containing a 5.7-kb EcoRI fragment capable of self-replication. This plasmid, designated pRE300, was incompatible with mini-F as well as with ColE1 derivatives. It represents a cointegrate formed in vivo between a 2.2-kb segment of the F replication region and a ColE1-type replicon of unknown derivation. The F-derived component of pRE300 corresponds to a minimalized F replicon (43.85–46.05 kb F) retaining oriII and the incB locus but missing the incC and incD functions. It is postulated that the Inc − mutation resulted from the insertion of a transposable DNA sequence into the incC locus of the parent F plasmid.