Cold Plasma Reactor Research Articles

Influence of ozone supply mode and aeration on photocatalytic ozonation of organic pollutants in wastewater using TiO2 and ZnO nanoparticles

Photocatalytic ozonation, which combines the effects of lighting and ozonation, has been shown to enhance the decolorization and degradation of organic pollutants in wastewater. Dye solutions with concentrations of 10 ppm for both methylene blue and methyl orange dyes were used. The influence of ozoneation on the performance of photocatalytic activity of TiO2 and ZnO nanoparticles for the removal of organic dyes from aqueous solutions was investigated. To evaluate their efficacy for the removal of methylene blue and methyl orange dyes from aqueous solutions, the photocatalysts were exposed to UV light for 90 min, with ozone supplied either intermittently or continuously by an SDBD cold plasma reactor. The photocatalysts utilized in this study were characterized using SEM and XRD techniques. The degree of color degradation was determined using UV–Vis spectroscopy. The results demonstrate that TiO2 and ZnO nanoparticles exhibit different degrees of photocatalytic activity for the two dyes. The addition of ozone was found to enhance both the color degradation and mineralization rates of the pollutants, with intermittent ozonation proving more effective than continuous ozonation. The most significant color degradation results were obtained using TiO2 nanoparticles with intermittent ozonation for methylene blue dye (97 %) and ZnO nanoparticles with intermittent ozonation for methyl orange dye (40 %). Overall, this study provides evidence that photocatalytic ozonation represents a promising technique for water treatment.

Enhancing microorganism inactivation performance through optimization of plate-to-plate dielectric barrier discharge cold plasma reactors

Atmospheric pressure dielectric barrier discharge cold plasma (CP) is an effective method for inactivating microorganism contamination. However, improving CP inactivation efficiency as affected by CP reactor parameters still remains unstudied. In this study, the effects of discharge voltage, dielectric material and dielectric thickness of CP reactor on inactivation performance were investigated, and their influence mechanisms on plasma discharge were discussed. Results indicated that efficiency was improved using the reactor parameters of a high discharge voltage (17 kV) with a centre frequency (10 kHz) and a high dielectric constant (ceramic) with a small dielectric thickness (1 mm), resulting in higher electron number density and electric field strength, producing more reactive substances for enhancing microorganism inactivation. Under the above conditions, CP treatment for 4 min inactivated 99.6% of Salmonella typhimurium and 96.1% of Listeria monocytogenes. It is hoped that this work could guide the design of commercial CP systems.

Effect of Plasma-Activated Water Bubbles on Fusarium graminearum, Deoxynivalenol, and Germination of Naturally Infected Barley during Steeping.

Contamination of barley by deoxynivalenol (DON), a mycotoxin produced by Fusarium graminearum, causes considerable financial loss to the grain and malting industries. In this study, two atmospheric cold plasma (ACP) reactors were used to produce plasma-activated water (PAW) bubbles. The potential of PAW bubbles for the steeping of naturally infected barley (NIB) during the malting process was investigated. The PAW bubbles produced by treating water for 30 min using a bubble spark discharge (BSD) at low temperature resulted in the greatest concentration of oxygen-nitrogen reactive species (RONS). This treatment resulted in 57.3% DON degradation compared with 36.9% in the control sample; however, the same treatment reduced germination significantly (p < 0.05). Direct BSD ACP treatment for 20 min at low temperature and indirect treatment for 30 min increased the percentage of germinated rootlets of the seedlings compared with the control. Considering both the DON reduction and germination improvement of barley seeds, continuous jet ACP treatment for 30 min performed better than the other treatments used in this study. At higher temperature of PAW bubbles, the concentration of RONS was significantly (p < 0.05) reduced. Based on quantitative polymerase chain reaction (qPCR) analysis and fungal culture tests, the PAW bubble treatment did not significantly reduce infection of NIB. Nonetheless, this study provides useful information for the malting industry for PAW treatment optimization and its use in barley steeping for DON reduction and germination improvement.

Investigation of Partial Oxidation of Methane in a Cold Plasma Reactor with Detailed Product Analysis

Cold plasma is a partially ionized state of matter that unites high reactivity and mild conditions. Therefore, cold plasma reactors are intriguing for reaction engineering. In this work, a laboratory scale dielectric barrier discharge (DBD) cold plasma reactor was designed, set up, and used for studying the influence of the specific energy input (SEI) on the product spectrum of the partial oxidation of methane. In total, 23 experiments were carried out near ambient conditions with a molar reactant ratio of methane to oxygen of 2:1 at SEI between 0.3 and 6.0 J cm−3. The feed also contained argon at a mole fraction of 0.75 mol mol−1. The product stream was split into a fraction that was condensed in a cold trap and the remaining gaseous fraction. The latter was analyzed at-line in a gas chromatograph equipped with a dual column and two carrier gases. The condensed fraction was analyzed by qualitative and quantitative 1H and 13C NMR spectroscopy, Karl Fischer titration, and sodium sulfite titration. In the product stream, 16 components were identified and quantified: acetic acid, acetone, carbon dioxide, carbon monoxide, ethanol, ethane, ethene, ethylene glycol, formaldehyde, formic acid, hydrogen, methanol, methyl acetate, methyl hydroperoxide, methyl formate, and water. A univariant influence of the SEI on the conversions of methane and oxygen and the selectivities to the products was observed. The experimental results provided here are an asset for developing reaction kinetic models of the partial oxidation of methane in DBD plasma reactors.

A Successful Elimination of Indonesian SARS-CoV-2 Variants and Airborne Transmission Prevention by Cold Plasma in Fighting COVID-19 Pandemic: A Preliminary Study

Global infection and mortality rates have soared to millions due to SARS-CoV-2 human-to-human transmission from via droplets which then declared as pandemic. This study examined the created cold plasma equipment (CPE) effectiveness in reducing COVID-19 transmission in a confined space. CPE sucked air using a fan in a test chamber then pushed it into a cold plasma reactor. The results indicated that it was able to terminate all SARS-CoV-2 variants along with bacteria and fungi indoors by keeping it turned on for 30 minutes’ minimum. CPE was proven as safe and effective to hinder virus transmission with the acceptable ozone emission as the side effect.

Removal of Pb(II), Cd(II) and Ni(II) Ions from Groundwater by Nonthermal Plasma.

The removal of Pb(II), Cd(II) and Ni(II) ions from aqueous solutions by means of nonthermal plasma with a dielectric barrier discharge is investigated. Aqueous solutions with metal ion concentrations from 10 to 100 mg/dm3 in spring water were used. In the first stage, the optimization of the solution flow rate, generator modulation frequency and duty cycle was made in terms of the removal efficiency of the considered metals. The removal was then investigated as a function of the number of passes of the solution through the cold plasma reactor. The effect of the initial concentration of ions in the solution was studied. Techniques such as composite central design, least squares method and Fourier transform infrared spectroscopy were used. The physical and chemical parameters of the solutions, such as electrical conductivity, pH, temperature, concentration of metal ions and the content of other substances (e.g., total organic carbon), were measured, and the presence of microorganisms was also examined. It was found that each pass of the solution through the cold plasma reactor causes a decrease in the concentration of Cd(II) and Ni(II); the concentration of Pb(II) drops rapidly after one pass, but further passes do not improve its removal. The removal percentage was 88% for Cd(II) after six passes and 72% for Pb(II) after one pass, whereas 19% for Ni(II). The purification mechanism corresponds to the precipitation of metal ions due to the increasing pH of the solution after exposure to cold plasma.

Design, characterization and applications of direct-current plasma source

In this paper, the construction and operation of a locally designed cold plasma reactor are described. The anode diameter effect was studied at three inner diameters, 5, 10 and 15 mm. This effect on the discharge and plasma characteristics was studied using oxygen and argon gases. It was found that the optimum diameter is 10 mm. Moreover, the plasma density and temperature were investigated using a cylindrical Langmuir probe at the optimum diameter. It was found that the electron temperature reaches 1.6 eV and the electron density reaches 2.3 × 108 cm−3 in the case of oxygen gas. Moreover, X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy analyses were carried out to characterize the manganese- and cobalt-doped ferrite (Mn0.5Co0.5Fe2O4) nanoparticle sample before and after oxygen plasma irradiation. The obtained results showed that the cold plasma reactor was constructed with high efficiency to meet the required applications such as surface modification, plasma deposition and etching.

Effect of non-thermal plasma using the isolation barrier vacuum reactor (DBD) on seven broccoli cultivars

Seed treatment with a DBD isolation barrier vacuum reactor. Using the drainage of the insulating barrier in the air at atmospheric pressure and room temperature, the effect of non-thermal plasma treatment of seeds on the development rate of seven broccoli cultivars cultivated in Mosul (Al Rashidiya) was investigated. The use of DBD at atmospheric pressure had a significant influence on germination and plant growth of the seven cultivars of broccoli from the seeds used for a period of 0.5, 1, 3, 5, 10, 15 minutes as compared to the control group. In comparison to the control sample, the favorable effect of plasma therapy on seedling growth for the timing (0.5 and 1 minute) had the optimum timing of exposing (broccoli) seeds to plasma from 3, 5, 10, 15 minutes. On the other hand, a negative effect was found after the seeds were exposed to plasma discharge for an extended period of time. The explanation for this might be due to the mechanical effect of the process of exposing seeds to plasma therapy, which resulted in a decrease in plant development and vitality when compared to the time of 0.5 minutes. These findings revealed that the newly constructed cold plasma reactors may considerably increase seed germination and plant development; however, the plasma processing duration for each seed must be tuned.

Systematic Simulation Strategy of Plasma Methane Pyrolysis for CO2‐Free H2

AbstractRecently, the direct conversion of methane into hydrogen using cold plasma reactors has attracted increasing attention, since hydrogen has considerable potential as a future feedstock in the steel and chemical industries. However, the simulation of plasma pyrolysis reactors is extremely complex due to the vast temporal and spatial ranges of the variables involved and steep gradients. Previously, methane pyrolysis has been meticulously modeled by 0D simulations, and 3D plasma modeling has been largely confined to Argon systems. In this paper, a systematic methodology is presented, which provides an expedient and efficient hierarchy of 0D to 3D simulations, in order to approximate the methane pyrolysis simulation of a plasma reactor in its entirety. Various simulation tools are applied in a coordinated and pragmatic manner. The results show that the proposed synergy allows simplification of the reaction set and arc characteristics, significantly reducing the runtime required for the simulations.

Liquid “Syngas” Based on Supercritical Water and Graphite Oxide/TiO2 Composite as Catalyst for CO2 to Organic Conversion

The conversion of carbon monoxide into organic substances is one of the top topics of modern science due to the development of industry and the climate changes caused by it on the one hand, and the possibility of obtaining an economic effect on the other, as it could allow for partial recovery of fuels. A problem in this regard has always been the low solubility of CO2 in water, which eliminated the possibility of easy converting carbon dioxide into the liquid. The development of research on water critical states revealed the fact that water in a subcritical state has a much higher ability to dissolve gases. And this effect was used to obtain the "liquid synthesis gas" model presented in this paper. Equally important was the selection of an appropriate catalyst that would increase the efficiency of the conversion process by generating hydrogen in the system under the influence of cold plasma. In this work we present the studies of transformation of CO2 dissolved in supercritical water using partially reduced graphite oxide—nanometric titania composite (RGO-TiO2) as catalyst, due to the ability of RGO to generate hydrogen in the water environment (water splitting) under the influence of various physical factors, especially cold plasma. The RGO catalyst was stabilized with titanium oxide to obtain higher activity at lower RGO concentrations in the system. Therefore, research on conversions was preceded by a thorough analysis of CO2 solubility in supercritical water, as well as an analysis of the structural, morphological, and spectroscopic properties of the catalyst.Graphic General scheme of cold plasma reactor.

Atmospheric plasma-based approaches for the degradation of dimethyl phthalate (DMP) in water

Cold plasma based treatment of contaminated water is becoming a promising novel green remediation option. This study assessed the performance of two different cold plasma reactors, using, respectively, a self-pulsing discharge (SPD) and a multipin corona discharge (MCD), in the degradation of dimethyl phthalate (DMP), a persistent and ubiquitous pollutant of the aquatic environment. The process kinetics and energy efficiency, as well as the main plasma generated reactive species were determined under various operating conditions concerning the plasma feed gas and flowrate, the voltage polarity, the input power, the DMP initial concentration, the liquid conductivity, and the aqueous matrix used to prepare DMP solutions for these experiments. The MCD reactor, operated with air as plasma feed gas and negative voltage polarity, gave the best results in terms of rate and energy efficiency. Moreover, variations in plasma input power and in the liquid conductivity have limited effect on DMP degradation rate, making this reactor suitable for treating liquids with a range of initial conductivities The effects of DMP initial concentration on its rate of degradation and on the process energy efficiency were also investigated. Differences in the efficiency of production and distribution of plasma generated reactive species, notably •OH and H2O2, observed for the two tested reactors are discussed in terms of different extension of the plasma/liquid interface and diffusion into the bulk solution. It is proposed that among the reactive species, •OH foremost, and O3 to a lesser extent, play a pivotal role in DMP degradation, while the contribution of H2O2 appears to be limited. The rate of DMP degradation was not drastically different in Milli-Q water and in tap water, a positive outcome in view of practical applications of the technology. The lower rate observed in tap than in Milli-Q water is attributed to the presence of bicarbonate and carbonate, which are known scavengers of hydroxyl radicals.

Recent progress in air treatment with combined photocatalytic/plasma processes: A review

Nowadays, air pollution is an increasingly important topic, as environmental regulations require limiting pollutant emissions. This problem requires new techniques to reduce emissions by either improving the current emission control systems and processes or installing new hybrid treatment systems. These are of broad diversity, and every system has its advantages and disadvantages. The tendency is, accordingly, to combine various techniques to achieve more acceptable and suitable treatment. Recent studies suggest that the combination of photocatalysis and plasma in a reactor can offer attractive pollutant treatment efficiency with a minimum of partially oxidized by-products than that of these processes taken separately. However, there is little review of the capability of this pairing to treat different brands of pollutants. Besides, available data concerning reactor design with flows treated 10 to 1000 times higher than those studied at the lab scale. This review paid particular attention to determine the reaction mechanisms in terms of engineering and design of combination reactors (plasma and catalysis). Likewise, we developed the effect of critical parameters such as pollutant load, relative humidity, and flow rate to understand the degradation kinetics of specific pollutants individually by using plasma and photocatalysis. Additionally, this review compares different designs of cold plasma reactors combination with heterogeneous catalysis with special attention on synergistic and antagonistic effects of using plasma and photocatalysis processes at the laboratory, pilot, and industrial scales. Therefore, the elements discussed in this review stick well to the first theme on pollution prevention of the special issue concerning pollution prevention and the application of clean technologies to promote a circular (bio) economy.

Impact of metals on (star)dust chemistry: a laboratory astrophysics approach.

Laboratory experiments are essential in exploring the mechanisms involved in stardust formation. One key question is how a metal is incorporated into dust for an environment rich in elements involved in stardust formation (C, H, O, Si). To address experimentally this question we have used a radiofrequency cold plasma reactor in which cyclic organosilicon dust formation is observed. Metallic (silver) atoms were injected in the plasma during the dust nucleation phase to study their incorporation in the dust. The experiments show formation of silver nanoparticles (~15 nm) under conditions in which organosilicon dust of size 200 nm or less is grown. The presence of AgSiO bonds, revealed by infrared spectroscopy, suggests the presence of junctions between the metallic nanoparticles and the organosilicon dust. Even after annealing we could not conclude on the formation of silver silicates, emphasizing that most of silver is included in the metallic nanoparticles. The molecular analysis performed by laser mass spectrometry exhibits a complex chemistry leading to a variety of molecules including large hydrocarbons and organometallic species. In order to gain insights into the involved chemical molecular pathways, the reactivity of silver atoms/ions with acetylene was studied in a laser vaporization source. Key organometallic species, Ag n C2H m (n=1-3; m=0-2), were identified and their structures and energetic data computed using density functional theory. This allows us to propose that molecular Ag-C seeds promote the formation of Ag clusters but also catalyze hydrocarbon growth. Throughout the article, we show how the developed methodology can be used to characterize the incorporation of metal atoms both in the molecular and dust phases. The presence of silver species in the plasma was motivated by objectives finding their application in other research fields than astrochemistry. Still, the reported methodology is a demonstration laying down the ground for future studies on metals of astrophysical interest such as iron.

Impact of cold plasma processing on major peanut allergens

Cold plasma is emerging as a novel food processing technology, with demonstrated efficacies for microbial inactivation and residual chemical dissipation of food products. Given the technology’s multimodal action it has the potential to reduce allergens in foods, however data on the efficacy and mechanisms of action are sparse. This study investigates the efficacy of cold plasma on major peanut allergens (Ara h 1 and Ara h 2). For this purpose, dry, whole peanut (WP) and defatted peanut flour (DPF) were subjected to an atmospheric air discharge using a pin to plate cold plasma reactor for different treatment durations. With increases in plasma exposure, SDS-PAGE analysis revealed reduced protein solubility of the major peanut allergens. Alterations in allergenicity and structure of Ara h 1 and Ara h 2 were examined using ELISA and circular dichroism (CD) spectroscopy. Competitive ELISA with proteins purified from plasma treated WP or DPF revealed reduced antigenicity for both Ara h 1 and Ara h 2. The highest reduction in antigenicity was 65% for Ara h 1 and 66% Ara h 2 when purified from DPF. Results from CD spectroscopy analysis of purified proteins strongly suggests the reduction in antigenicity is due to modifications in the secondary structure of the allergens induced by plasma reactive species. Cold plasma is effective at reducing peanut protein solubility and causes changes in allergen structure leading to reduced antigenicity.

Partial oxidation of methane in a cold plasma reactor

Partial oxidation of methane in a cold plasma reactor

Dissipation of Pesticide Residues on Grapes and Strawberries Using Plasma-Activated Water

In this study, we present a novel atmospheric air plasma discharge for the generation of plasma-activated water (PAW), with the aim of reducing pesticide residues on fresh fruit. For this purpose, a large discharge volume pin-to-plate cold plasma reactor was employed. The pesticide-spiked grapes and strawberries were processed with varying PAW concentrations to study their efficacies for pesticide degradation combined with an evaluation of any induced changes in key nutritional and quality attributes. The results suggest that the reduction of chlorpyrifos was 79% on grapes and 69% on strawberries while that of carbaryl was 86% on grapes and 73% on strawberries, respectively. The degradation of pesticides in PAW is due to the generation of metastable reactive species including nitrates, nitrites, and hydrogen peroxide. The high oxidation potential and acidic environment of this PAW are proposed as important actors for pesticide dissipation. In addition to the effective pesticide reductions obtained, there were no significant changes in the key physical attributes (color and firmness) of the treated samples and only slight changes in the ascorbic acid levels observed for both strawberries and grapes. This study points to the effective potential of PAW for chemical decontamination of fruit while maintaining important quality and nutritional parameters.

A Novel Active Needle Probe in an Atmospheric Pressure Corona-Based Cold Plasma Reactor With Admixtures of Helium and Dry Air

Corona-based atmospheric pressure cold plasma reactors can be applied to material processing, bacteria inactivation, plasma medicine, etc. Knowledge generated in this article can be used to optimize such reactors when they use electrodes consisting of arrays of needles. The experiment used a gas admixture of helium and dry air and an applied 60-Hz ac voltage of 6.5-kV rms, with an electrode gap of 6 cm. A novel single conducting needle probe was inserted into the corona gap from below the grounded electrode. Two distinct conduction and displacement current signals were captured by a digital oscilloscope: 1) current collected by the probe and 2) current collected by the grounded electrode. Current oscillograms were sorted into several classes, one of which showed evidence that corona pulses launched from the tip of the needle probe acted to shield surrounding portions of the grounded electrode resulting in distinct counter pulses of current (called shielding current pulses) observed at the grounded electrode current sensor. This needle probe has the ability to provide information regarding which electrode launches a corona pulse when both needle arrays (the high-voltage array and the grounded array) are known to be sources of corona discharges.

New insights into the structure and formation of coals, terrestrial and extraterrestrial kerogens from resonant UV Raman spectroscopy

Resonant UV (244 nm-excitation) Raman spectroscopy was used to characterize a series of coals, type II kerogens, Insoluble Organic Matter (IOM) extracted from primitive chondrites and two stratospheric Interplanetary Dust Particles. UV-Raman spectra of immature terrestrial kerogens and coals are distinct from those of extraterrestrial kerogens extracted from type 1 and 2 primitive chondrites, allowing unambiguous identification. The degree of disorder in the refractory carbonaceous matter in the considered IDPs is found to be higher than in primitive chondrites, confirming former interpretation of visible (514 nm-excitation) Raman spectra of IDPs. Spectral and structural features of laboratory analogues of chondritic organic matter formed in cold plasma reactors at 500–700 °C differ from those of natural samples, challenging the hypothesis that chondritic organic matter within the protosolar disk may form through plasma reactions. Finally, UV Raman data shed new light in the structural evolution of coals during maturation and support the presence of an sp2 structural transition at vitrinite reflectance Ro ∼ 0.4–0.5%. Comparison with former visible Raman and infrared spectroscopic data confirms the existence of this structural transition, which is related to a dramatic drop of oxygenated species (carboxyl, hydroxyl, ketone and ether groups). Oxygen thus plays an indirect but significant role in the control of the Raman spectra of polyaromatic materials. A potential application of this technique is the determination of the biotic versus abiotic origin of kerogens in ancient rocks on Earth, and of soils and rocks on Mars that is otherwise difficult with classical visible-excitation Raman spectroscopy.

Fatty Acid Methyl Ester Synthesis in the Cold Plasma Reactor using CO_2 and Steam Mixture

Fatty Acid Methyl Ester Synthesis in the Cold Plasma Reactor using CO_2 and Steam Mixture

Investigation of a large gap cold plasma reactor for continuous in-package decontamination of fresh strawberries and spinach

Abstract The aim of this work was to investigate the efficacy of a large gap atmospheric cold plasma (ACP) generated with an open-air high-voltage dielectric barrier discharge (DBD) pilot-scale reactor, operated in either static (batch) or continuous mode for produce decontamination and quality retention. Significant reductions in the bacterial populations inoculated on the strawberries and spinach were obtained after the static mode of ACP treatment with 2.0 and 2.2 log10 CFU/ml reductions for E. coli and 1.3 and 1.7 log10 CFU/ml reductions for L. innocua, respectively. Continuous treatment was effective against L. innocua inoculated on strawberries, with 3.8 log10 CFU/ml reductions achieved. No significant differences in colour, firmness, pH or total soluble solids (TSS) was observed between control and ACP-treated samples with the effects of treatment retained during the shelf-life period. The pilot-scale atmospheric air plasma reactor retained the strawberry quality characteristics in tandem with useful antimicrobial efficacy. Industrial relevance This in-package plasma technology approach is a low-power, water-free, non-thermal, post-package treatment. Generating cold plasma discharges inside food packages achieved useful antimicrobial effects on fresh produce. Depending on the bacterial type, produce and mode of ACP treatment significant reductions in the populations of pathogenic microorganisms attached to the fresh produce was achieved within 2.5 min of treatment. The principal technical advantages include contaminant control, quality retention, mitigation of re-contamination and crucially the retention of bactericidal reactive gas molecules in the food package volume, which then revert back to the original gas.