Coil For Wireless Power Transfer System Research Articles

Research on the Characteristics of Wireless Power Transfer in Non-ferromagnetic Metal Pipe

With the development of various electronics, the way of transmitting energy by wire has brought increasingly negative effects on the operability and convenience of products. As wireless power transfer (WPT) technology requires no transmission lines, it has received increasingly wide attention. Most of the previous research on the technology of magnetic resonant coupling WPT mainly focused on the transmission of energy in the air. This paper establishes the wireless power transfer system model under non-ferromagnetic metallic environment and studies the effect of non-ferromagnetic metallic environment on coil self-inductance L, mutual inductance M and coil resistance R of WPT system. On this basis, the study on the relationship between coil diameter and mutual inductance is carried out for aluminium pipe, and the relationship between coil diameter and diameter of metal pipe at the maximum mutual inductance is fitted. Besides, experimental verification is conducted for the change of mutual inductance between the coils of WPT system in the aluminium pipe, presenting that the actual measurement results of mutual inductance in the aluminium pipe are consistent with the theory.

Regulation of spatial fields in wireless power transfer with artificial magnetic conductor

In order to improve the efficiency of wireless power transfer (WPT) system, the spatial fields are regulated on a two-non-resonant-coil WPT system by hexagon artificial magnetic conductors (AMC). In our configuration, the AMC is located by the side of the two-non-resonant-coil WPT system and close to the transmitter coil. The AMC structure consists of small hexagon copper patches periodically arranged on the dielectric substrate. Each patch is grounded by a via passing through its center hole. Chip capacitors are soldered in the gaps between the adjacent patches. We can design the working frequency of WPT system through the capacitance of these chip capacitors. The results show that the electromagnetic fields are changed between the transmitter coil and the receiver coil in WPT system due to the introducing of the AMC structure. There are two main reasons. First, many resonant modes are excited by near magnetic fields on the AMC structure. Second, near magnetic fields are shielded by the AMC structure. The variation of space electromagnetic field improves the transmission efficiency of WPT system. When the working frequency is 27 MHz and the transmission distance is 3 cm, the experiment verifies that the transmission efficiency increases by 22% in the WPT system with the AMC structure compared with the WPT system without the AMC structure. Simultaneously, the transmission efficiency is raised by 25% at different transmission distances. The simulation results are almost consistent with the experimental results. There is a little difference that the number of resonant modes is different between the simulation and the experiment due to the resistance loss of the chip capacitors in experiment. Therefore, we correct the simulation results under consideration of resistive loss. In addition, the excited multiple resonant modes can supply multiple and adjustable working frequencies in the WPT system with the AMC structure. In practical applications, AMC is low in cost and easy to implement.

Analysis of transmission efficiency of the superconducting resonance coil according the materials of cooling system

The wireless power transfer (WPT) system using a magnetic resonance was based on magnetic resonance coupling of the transmission and the receiver coils. In these system, it is important to maintain a high quality-factor (Q- factor) to increase the transmission efficiency of WPT system. Our research team used a superconducting coil to increase the Q-factor of the magnetic resonance coil in WPT system. When the superconductor is applied in these system, we confirmed that transmission efficiency of WPT system was higher than normal conductor coil through a preceding study. The efficiency of the transmission and the receiver coil is affected by the magnetic shielding effect of materials around the coils. The magnetic shielding effect is dependent on the type, thickness, frequency, distance, shape of materials. Therefore, it is necessary to study the WPT system on the basis of these conditions. In this paper, the magnetic shield properties of the cooling system were analyzed using the High-Frequency Structure Simulation (HFSS, Ansys) program. We have used the shielding materials such as plastic, aluminum and iron, etc. As a result, when we applied the fiber reinforced polymer (FRP), the transmission efficiency of WPT was not affected because electromagnetic waves went through the FRP. On the other hand, in case of a iron and aluminum, transmission efficiency was decreased because of their electromagnetic shielding effect. Based on these results, the research to improve the transmission efficiency and reliability of WPT system is continuously necessary.

Induced Current Calculation in Detailed 3-D Adult and Child Model for the Wireless Power Transfer Frequency Range

Induced current density in the human body is the basic restriction of the electromagnetic field protection guidelines for frequencies . Due to the difficulty of measurement, numerical methods are often used for assessment of basic restrictions. In this paper, induced current distributions are calculated in the high-resolution 3-D adult and child models exposed to magnetic fields between 100 kHz and 10 MHz, which is the frequency range of the resonant wireless power transfer (WPT) systems. For this frequency range, it is difficult to apply the conventional finite-difference time-domain (FDTD) method for bioelectric field computation. Thus, the quasi-static FDTD method is used to reduce the number of time steps. The results are analyzed according to different human models, grounding conditions, organs, frequencies, and orientations of the incident magnetic field. In addition, the plane wave exposure is compared with exposure to magnetic field of transmit coil of WPT system. Using the calculation results, the feasibility of the magnetic field reference level in the International Commission on Non-Ionizing Radiation Protection guideline is analyzed.