Coherent Light Beams Research Articles

High topological charge lasing in quasicrystals.

Photonic modes exhibiting a polarization winding akin to a vortex possess an integer topological charge. Lasing with topological charge 1 or 2 can be realized in periodic lattices of up to six-fold rotational symmetry-higher order charges require symmetries not compatible with any two-dimensional Bravais lattice. Here, we experimentally demonstrate lasing with topological charges as high as -5, +7, -17 and +19 in quasicrystals. We discover rich ordered structures of increasing topological charges in the reciprocal space. Our quasicrystal design utilizes group theory in determining electromagnetic field nodes, where lossy plasmonic nanoparticles are positioned to maximize gain. Our results open a new path for fundamental studies of higher-order topological defects, coherent light beams of high topological charge, and realizations of omni-directional, flat-band-like lasing.

Optical coherence measurement-based penetration depth monitoring of stainless steel sheets in laser lap welding using long short-term memory network

The industrial production site for laser lap welding of thin stainless steel plates puts strict requests on the level and fluctuation stability of penetration depth. Hence, the penetration depth monitoring is increasingly garnering attention. This research proposes an optical coherence measurement-based approach to monitor penetration depth utilizing machine learning in laser lap welding for stainless steel sheets. After the acquisition of the keyhole depth signal by the coherent light beam, it is found that there is a significant association relationship between the reconstructed keyhole depth obtained by empirical modal decomposition and the penetration depth curve, but meanwhile a penetration depth monitoring error also exists. Accordingly, based on the cross-correlation analysis and numerical simulation, it is revealed that the formation mechanism and sources of this error are related to the “bottom melt layer thickness”, “hysteresis property” and “multiple reflections”. On this basis, a long short-term memory network is built to memorize the historical information of the reconstructed keyhole depth for predicting the penetration depth at each moment. The experimental results demonstrate that the prediction model has high accuracy and good generalization ability, and thus effective monitoring for penetration depth can be achieved.

Quantum Nonlinear Spectroscopy via Correlations of Weak Faraday‐Rotation Measurements

AbstractThe correlations of fluctuations are key to studying fundamental quantum physics and quantum many‐body dynamics. They are also useful information for understanding and combating decoherence in quantum technology. Nonlinear spectroscopy and noise spectroscopy are powerful tools to characterize fluctuations, but they can access only very few among the many types of higher‐order correlations. A systematic quantum sensing approach, called quantum nonlinear spectroscopy (QNS), is recently proposed for extracting arbitrary types and orders of time‐ordered correlations, using sequential weak measurement via a spin quantum sensor. However, the requirement of a central spin as the quantum sensor limits the versatility of the QNS since usually a central spin interacts only with a small number of particles in proximity and the measurement of single spins needs stringent conditions. Here, the aim is to employ the polarization (a pseudo‐spin) of a coherent light beam as a quantum sensor for QNS. After interacting with a target system (such as a transparent magnetic material), the small Faraday rotation of the linearly polarized light can be measured, which constitutes a weak measurement of the magnetization in the target system. Using a Mach–Zehnder interferometer with a designed phase shift, one can post‐select the effects of the light–material interaction to be either a quantum evolution or a quantum measurement of the material magnetization. This way, the correlated difference photon counts of a certain number of measurement shots, each with a designated interference phase, can be made proportional to a certain type and order of correlations of the magnetic fluctuations in the material. The analysis of the signal‐to‐noise ratios shows that the second‐order correlations are detectable in general under realistic conditions and higher‐order correlations are significant when the correlation lengths of the fluctuations are comparable to the laser spot size (such as in systems near the critical points). Since the photon sensor can interact simultaneously with many particles and interferometry is a standard technique, this protocol of QNS is advantageous for studying quantum many‐body systems.

Coherence enhancement between incoherent lasers based on passive phase compensation

AbstractCoherent light beams play an important role in the development of opto‐electronic microwave and terahertz technologies, serving as a source for generating RF carrier signals with very high quality. The authors explore in this work an approach to enhance the coherence between two incoherent lasers so as to provide coherent light beams, and proof‐of‐concept demonstrates a terahertz signal generation with low phase noise. Based on the proposed passive phase compensation technique, the phase noise between two independent lasers can be well suppressed and the carrier to noise ratio in the terahertz regime remains high. In the experiment, the beating phase noise between two independent lasers is reduced from −60.68 dBc/Hz@10kHz to −90.05 dBc/Hz@10kHz at about 280 GHz, which is promisingly applicable in the terahertz photonics community.

Investigation of diffraction grating in three-level gain medium

This research investigates the modulation of diffraction intensity distributions in both one- and two-dimensional scenarios within a three-level atomic system. The study employs a partially coherent light beam as the probe field, engaging with the atomic medium. Additionally, a control field capable of generating a standing wave is introduced. Analysis reveals that various parameters, including spatial coherence, beam width, and mode index of the partially coherent light, exert influence on the diffraction intensity distribution. The presence of a microwave field in the three-level atom is also considered, impacting the diffraction intensity distribution. Remarkably, the study observes that altering parameters such as microwave field strength and beam width of the partially coherent light results in the maximum energy of the probe field being transferred to higher orders, concurrently minimizing the central intensity. This distinctive method allows for the manipulation of diffraction intensity distribution through external control parameters. The proposed theoretical framework for creating a diffraction grating presents a novel avenue for experiment.

Neural étendue expander for ultra-wide-angle high-fidelity holographic display

Holographic displays can generate light fields by dynamically modulating the wavefront of a coherent beam of light using a spatial light modulator, promising rich virtual and augmented reality applications. However, the limited spatial resolution of existing dynamic spatial light modulators imposes a tight bound on the diffraction angle. As a result, modern holographic displays possess low étendue, which is the product of the display area and the maximum solid angle of diffracted light. The low étendue forces a sacrifice of either the field-of-view (FOV) or the display size. In this work, we lift this limitation by presenting neural étendue expanders. This new breed of optical elements, which is learned from a natural image dataset, enables higher diffraction angles for ultra-wide FOV while maintaining both a compact form factor and the fidelity of displayed contents to human viewers. With neural étendue expanders, we experimentally achieve 64 × étendue expansion of natural images in full color, expanding the FOV by an order of magnitude horizontally and vertically, with high-fidelity reconstruction quality (measured in PSNR) over 29 dB on retinal-resolution images.

Formation of multibeam dynamic gradient interference light fields with refractive optical elements

This paper presents methods for the formation and properties of light fields that controllably vary in time and space, obtained as a result of the interference of three or four coherent light beams using refractive optical elements. The formation of three-beam and four-beam interference fields is carried out using trihedral and tetrahedral glass pyramids respectively. The possibility of the interference field displacement in the transverse plane is ensured by devices for controlled phase changes of at least two of the interfering beams. The directions of propagation of these beams do not lie in the same plane with the optical axis of the original beam incident on the pyramid. In threeand four-beam dynamic interference fields the peak intensity values are higher than in the original laser beams and two-beam interference fields, so it is advisable to use them for processing flat objects with laser radiation, moving the interference maxima along the surface of the object. With a pairwise azimuthal displacement of the propagation directions of four interfering beams around the longitudinal axis, a dynamic interference field is formed, the periodically structured maxima of which cyclically smoothly change their shape from cells to band and back. At different speeds of pairs of directions the interference structure of the maxima rotates around the longitudinal axis. Therefore, this field can be used for therapeutic effects on biological tissues and for mixing microparticles in suspensions and emulsions. Since the local maxima of the intensity of all these interference fields have dimensions of the order of several micrometers while exceeding in value the maximum intensity of the initial light beam, these fields in the cross section are gradient and therefore can be used not only for laser exposure, but also for moving ensembles of microparticles including for sorting and changing concentration.

Three-channel robust optical encryption via engineering coherence Stokes vector of partially coherent light

Optical encryption strategies utilizing fully coherent light have been widely explored but often face challenges such as speckle noise and beam instabilities. In this work, we introduce a novel protocol for multi-channel optical information encoding and encryption using vectorial spatial coherence engineering of a partially coherent light beam. By characterizing the beam’s spatial coherence structure with a 2×2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$2 \ imes 2$$\\end{document} coherence matrix, we demonstrate independent control over the three components of the coherence Stokes vector. This allows for three-channel optical information encoding and encryption, with applications in color image representation. Unlike existing methods based on fully coherent light modulations, our approach utilizes a two-point dependent coherence Stokes vector, proving resilient to random noise in experimental scenarios. Our findings provide a robust foundation for higher-dimensional optical encoding and encryption, addressing limitations associated with partially coherent light in complex environments.

Tunable polarization holographic gratings obtained by varying the ratio of intensities of the recording beams

Polarization holography has been extensively applied in many fields, such as optical science, metrology, and biochemistry, due to its property of polarization modulation. However, the modulated polarization state of diffracted light corresponds strictly to that of incident light one by one. Here, a kind of tunable polarization holographic grating has been designed in terms of Jones matrices, and intensity-based polarization manipulation has been realized experimentally. The proposed tunable polarization holographic grating is recorded on an azobenzene liquid-crystalline film by a pair of coherent light beams with orthogonal polarization states and asymmetrically controlled intensities. It is found that the diffracted light can be actively manipulated from linearly to circularly polarized based on the light intensity of the recording holographic field when the polarization state of incident light keeps constant. Our work could enrich the field of light manipulation and holography.

Characterization of Orbital Angular Momentum Beams by Polar Mapping and Fourier Transform

The recognition, decoding and tracking of vortex patterns is of increasing importance in many fields, ranging from the astronomical observations of distant galaxies to turbulence phenomena in liquids or gases. Currently, coherent light beams with orbital angular momentum (OAM) are of particular interest for optical communication, metrology, micro-machining or particle manipulation. One common task is to identify characteristic spiral patterns in pixelated intensity maps at real-world signal-to-noise ratios. A recently introduced combination of polar mapping and Fast Fourier Transform (FFT) was extended to novel sampling configurations and applied to the quantitative analysis of the spiral interference patterns of OAM beams. It is demonstrated that specific information on topological parameters in non-uniform arrays of OAM beams can be obtained from significantly distorted and noisy intensity maps by extracting one- or two-dimensional angular frequency spectra from single or concatenated circular cuts in either spatially fixed or scanning mode. The method also enables the evaluation of the quality of beam shaping and optical transmission. Results of proof-of-principle experiments are presented, resolution limits are discussed, and the potential for applications is addressed.

Inorganic perovskite-based active multifunctional integrated photonic devices

The development of highly efficient active integrated photonic circuits is crucial for advancing information and computing science. Lead halide perovskite semiconductors, with their exceptional optoelectronic properties, offer a promising platform for such devices. In this study, active micro multifunctional photonic devices were fabricated on monocrystalline CsPbBr3 perovskite thin films using a top-down etching technique with focused ion beams. The etched microwire exhibited a high-quality micro laser that could serve as a light source for integrated devices, facilitating angle-dependent effective propagation between coupled perovskite-microwire waveguides. Employing this strategy, multiple perovskite-based active integrated photonic devices were realized for the first time. These devices included a micro beam splitter that coherently separated lasing signals, an X-coupler performing transfer matrix functions with two distinguishable light sources, and a Mach-Zehnder interferometer manipulating the splitting and coalescence of coherent light beams. These results provide a proof-of-concept for active integrated functionalized photonic devices based on perovskite semiconductors, representing a promising avenue for practical applications in integrated optical chips.

Change of polarization degree of light beams on propagation in curved space

Even in free space, which is commonly considered of as a flat space–time in most settings, the degree of polarization of a partially spatially coherent light beam changes as it travels. Similarly, the polarization degree would change when a partially spatially coherent light beam propagates in a curved space–time. The difference of the polarization degree between the curved space and flat space can reveal the essential structure of the curved space. In this work, we consider a simplest case of curved space known as Schwarzschild spacetime. We can simulate the Schwarzschild space–time as an optical material with an effective refractive index. The difference of the polarization degree of a light beam propagating in curved space and flat space can be achieved up to 5%, which is detectable in practical measurement. In addition, we have found that the partially spatially coherent light source is necessary for obtaining significant changes in polarization degree. Our results provide an alternative method to estimate the Schwarzschild radius of a massive object with the optical polarization degree measurement.

Towards Mixed-State Coded Diffraction Imaging.

Coherent diffraction imaging (CDI) is a computational technique for reconstructing a complex-valued optical field from an intensity measurement. The approach is to illuminate an object with a coherent beam of light to form a diffraction pattern, and use a phase retrieval algorithm to reconstruct the object's complex transmittance from the measurement. However, as the name implies, conventional CDI assumes highly coherent illumination. Recent works therefore extend CDI to account for partial coherence and imperfect detection, by modeling light as an incoherent mixture of multiple fields (e.g., multiple wavelengths) and recovering each field simultaneously. In this work, we make strides towards the practical implementation and usage of multi-wavelength diffraction imaging. In particular, we provide novel analysis of the noise characteristics of multi-wavelength diffraction imaging, and show that it is preferable to coherent diffraction imaging under high signal-independent noise. Additionally, we present a compact coded diffraction imaging system and corresponding phase retrieval algorithms to robustly and simultaneously recover complex fields representing multiple wavelengths. Using a novel mixed-norm color prior, our prototype system reconstructs a larger number of multi-wavelength fields from fewer measurements than existing methods, and supports applications such as micron-scale optical path difference measurement via synthetic wavelength holography.

Polarization- and Chaos-Game-Based Fingerprinting of Molecular Targets of Listeria Monocytogenes Vaccine and Fully Virulent Strains.

Two approaches to the synthesis of 2D binary identifiers ("fingerprints") of DNA-associated symbol sequences are considered in this paper. One of these approaches is based on the simulation of polarization-dependent diffraction patterns formed by reading the modeled DNA-associated 2D phase-modulating structures with a coherent light beam. In this case, 2D binarized distributions of close-to-circular extreme polarization states are applied as fingerprints of analyzed nucleotide sequences. The second approach is based on the transformation of the DNA-associated chaos game representation (CGR) maps into finite-dimensional binary matrices. In both cases, the differences between the structures of the analyzed and reference symbol sequences are quantified by calculating the correlation coefficient of the synthesized binary matrices. A comparison of the approaches under consideration is carried out using symbol sequences corresponding to nucleotide sequences of the hly gene from the vaccine and wild-type strains of Listeria monocytogenes as the analyzed objects. These strains differ in terms of the number of substituted nucleotides in relation to the vaccine strain selected as a reference. The results of the performed analysis allow us to conclude that the identification of structural differences in the DNA-associated symbolic sequences is significantly more efficient when using the binary distributions of close-to-circular extreme polarization states. The approach given can be applicable for genetic differentiation immunized from vaccinated animals (DIVA).

All-optical switching based on coherent control of metasurface

In this paper, we propose a novel method to design ultrafast all-optical switchings based on the coherent perfect absorption principle of metasurface. Using the coherent interaction between two beams of coherent light and the metasurface, the absorption can be modulated between 0.3% and 98. 3%. Since no nonlinear dielectric is used, the ultrafast all-optical switching function can be achieved at arbitrary low intensity conditions. We further studied the mechanism of resonant absorption on metasurface, and analyzed the influence of geometric parameters on resonant absorption. Through time-domain simulation analysis, when the incident laser pulse duration is 40 fs, the switching response time is 82 fs, which provides a switching contrast ratio of more than 108.

Spatial intensity correlations of transmitted intensity patterns emerging from large particles.

Propagation of a coherent light beam through a random medium generates speckle patterns, in which some information of media and object is hidden. Speckles produced by particles smaller than wavelength are studied thoroughly, yet it is also essential to investigate speckles produced by larger particles. In this paper, the spatial intensity correlations of transmitted speckle patterns generated by large particles are studied theoretically and experimentally. A semi-empirical expression of spatial intensity correlation function of speckle patterns is derived based on Bethe-Salpeter equation, taking particle size and concentration into account. After performing experiments with various particle sizes and concentrations, we fit the theoretical expression to experimental results and determine the introduced parameters. We analyze the variation of spatial intensity correlation function with particle size and concentration. Theoretical analyses and experimental results given in this paper have potential applications in coherent imaging through random and disordered media.

Sensing azimuthally symmetric objects by a single-pixel detector via COAM matrix

A coherence-orbital angular momentum (COAM) matrix describes the second-order spatial correlations among the pairs of the OAM states in a light beam at two radial positions. It provides a detailed information regarding the azimuthal features of the light beam itself or of the objects interacting with it. In this Letter, we reveal a close relationship existing between the COAM matrix's elements of a partially coherent light beam and the angular gratings that it passes through. It is demonstrated both in theory and in experiment that all the parameters of the angular gratings can be identified by measuring the COAM matrix elements. While the off-diagonal elements possess information about the angular shifts and the rotation speed of the angular grating, the diagonal elements account for the energy distribution among the OAM modes. The experimental results agree reasonably well with the theoretical analysis. One practically significant capability is that our technique offers the determination of angular shifts of azimuthally symmetric objects and/or their rotational speed, by means of a single-pixel detector.

Type of hyperbolic-cosine-form inseparable phase and its application in particle manipulation

The ability to engineer the distribution of light with high precision is the key to improving the control accuracy and freedom of optical manipulation. Instead of traditional optical manipulation based on using the three-dimensional adjustable displacement platform, our report demonstrates that evolutions of light field distributions during propagation can be used to manipulate particles. By devising a hyperbolic-cosine-form inseparable phase, we theoretically endow the partially coherent light beam with the optional self-stretching or self-splitting ability. Importantly, we achieved the controllable separation of the particles in our experiment by using this self-splitting ability. Our results demonstrate the feasibility of manipulating particles by using light beam evolutions and further improve the control freedom and precision of traditional optical tweezers.

Generation of optical vortex lattices by in-line phase modulation with partially coherent light.

Of late, generation of different kinds of optical vortex lattices has been gaining much attention due to various applications. Several methods have been reported for the generation of optical vortex lattices using a coherent light source involving interferometric, diffractive, and pinhole phase plate methods. Owing to cost effectiveness and ease in optical implementation, these days use of incoherent or partially coherent light beams is becoming popular. In this study, we demonstrate generation of different kinds of optical vortex lattices through in-line modulation of phase distributions employing the phase concatenation approach and a light-emitting diode as a light source. It is a non-interferometric and flexible technique for the selection of the parameters that characterize the optical vortices and their arrays. The proposed method allows generation of an array of optical vortices of different topological charges with zero and non-zero radial indices having different symmetries.

Clinical applications of lasers in conventional periodontal care

Periodontal (gum) diseases present one of the main threats to oral and general health; they are very prevalent across the globe and, if left untreated, lead to tooth loss, with a significant impact on the quality of life. In addition, the impact of gum infection and inflammation on diabetes and cardiovascular disease complications has been well documented. Having in mind the key role of bacteria and the host’s immune response in the development of periodontal diseases but also the subgingival niche anatomy that complicates the adequate management of the dental biofilm and post-treatment healing, the field of periodontics is open to new or additional therapeutic methods that would complement the conventional approaches to periodontal care. Lasers were one of the first instruments used for photon therapy in dentistry due to their ability to emit a collimated, coherent light beam with monochromatic and synchronous wavelengths. We reviewed here the possibilities of the application and therapeutic effects of lasers during the initial phase of periodontal therapy using Er:YAG, Nd:YAG, CO2, and diode lasers. Therefore, the aim of this paper is to summarize the use of lasers and their clinical effects as adjuncts to the conventional, nonsurgical treatment of patients with periodontitis and to facilitate a scientific debate on this under-researched and controversial field of dental care.