Coexpression Of VP2 Research Articles

Co-expression of VP2, NS1 and NS2-Nt proteins by an MVA viral vector induces complete protection against bluetongue virus.

Bluetongue (BT), caused by bluetongue virus (BTV), is an important arthropod-borne livestock disease listed by the World Organization for Animal Health. Live-attenuated and inactivated vaccines have permitted to control BT but they do not simultaneously protect against the myriad of BTV serotypes. Recently, we identified the highly conserved BTV nonstructural protein NS1 and the N-terminal region of NS2 as antigens capable of conferring multiserotype protection against BTV. Here, we designed Modified Vaccinia Ankara (MVA) viral vectors that expressed BTV-4 proteins VP2 or VP7 along with NS1 and NS2-Nt as well as MVAs that expressed proteins VP2, VP7 or NS1 and NS2-Nt. Immunization of IFNAR(-/-) mice with two doses of MVA-NS1-2A-NS2-Nt protected mice from BTV-4M infection by the induction of an antigen-specific T cell immune response. Despite rMVA expressing VP7 alone were not protective in the IFNAR(-/-) mouse model, inclusion of VP7 in the vaccine formulation amplified the cell-mediated response induced by NS1 and NS2-Nt. Expression of VP2 elicited protective non-cross-reactive neutralizing antibodies (nAbs) in immunized animals and improved the protection observed in the MVA-NS1-2A-NS2-Nt immunized mice when these three BTV antigens were co-expressed. Moreover, vaccines candidates co-expressing VP2 or VP7 along with NS1 and NS2-Nt provided multiserotype protection. We assessed protective efficacy of both vaccine candidates in sheep against virulent challenge with BTV-4M. Immunization with MVA-VP7-NS1-2A-NS2-Nt partially dumped viral replication and clinical disease whereas administration of MVA-VP2-NS1-2A-NS2-Nt promoted a complete protection, preventing viraemia and the pathology produced by BTV infection.

Identification of rotavirus VP6 residues located at the interface with VP2 that are essential for capsid assembly and transcriptase activity.

Rotavirus has a complex triple-layered icosahedral capsid. The external layer consists of VP7 and VP4, the intermediate layer consists of VP6 trimers, and the internal layer consists of VP2. Double-layered particles (DLP) derived from the virus by solubilization of VP4 and VP7 are transcriptionally competent and extrude capped mRNA from their vertices. Analysis of the pseudoatomic model of the VP6 layer, obtained by placing the atomic structure of VP6 into electron microscopy reconstructions of the DLP, has identified the regions of the protein involved in interactions with the internal layer. To study the role of VP6 both in the assembly of DLP and in transcription, 13 site-specific substitution mutations of VP6, targeting the contacts between the two inner layers, were constructed and expressed in the baculovirus system. The effects of these mutations on VP6 expression, trimerization, and formation of macromolecular assemblies were investigated. Using either in vitro reconstituted DLP derived from purified viral cores and recombinant VP6 or in vivo self-assembled virus-like particles resulting from the coexpression of VP2 and VP6 in the baculovirus-Sf9 system (VLP2/6), we have identified the amino acids essential for recovery of transcription or assembly. All VP6 mutants formed stable trimers which, like wild-type VP6, assembled into tubular structures. The ability of VP6 to interact with VP2 was examined by several assays, including electron microscopy, coimmunoprecipitation, purification of VLP2/6, and monitoring of the transcriptase activity of reconstituted DLP. Of the 13 VP6 mutants examined, 3 were unable to assemble with VP2 and 3 others partially assembled. These mutants either did not rescue the transcriptase activity of core particles or did so only marginally. Four mutants as well as the wild-type VP6 assembled and transcribed very well. Three mutants assembled well on cores but, surprisingly, did not rescue the transcriptase activity of reconstituted DLP. Our results indicate that hydrophobic interactions between VP6 and VP2 residues are responsible for the stability of the DLP. They also show that subtle electrostatic interactions between VP6 and the underlying transcriptase machinery can be essential for mRNA synthesis.

Complementary roles of multiple nuclear targeting signals in the capsid proteins of the parvovirus minute virus of mice during assembly and onset of infection.

This report describes the distribution of conventional nuclear localization sequences (NLS) and of a beta-stranded so-called nuclear localization motif (NLM) in the two proteins (VP1, 82 kDa; VP2, 63 kDa) forming the T=1 icosahedral capsid of the parvovirus minute virus of mice (MVM) and their functions in viral biogenesis and the onset of infection. The approximately 10 VP1 molecules assembled in the MVM particle harbor in its 142-amino-acid (aa) N-terminal-specific region four clusters of basic amino acids, here called BC1 (aa 6 to 10), BC2 (aa 87 to 90), BC3 (aa 109 to 115), and BC4 (aa 126 to 130), that fit consensus NLS and an NLM placed toward the opposite end of the polypeptide (aa 670 to 680) found to be necessary for VP2 nuclear uptake. Deletions and site-directed mutations constructed in an infectious MVM plasmid showed that BC1, BC2, and NLM are cooperative nuclear transport sequences in singly expressed VP1 subunits and that they conferred nuclear targeting competence on the VP1/VP2 oligomers arising in normal infection, while BC3 and BC4 did not display nuclear transport activity. Notably, VP1 proteins mutated at BC1 and -2, and particularly with BC1 to -4 sequences deleted, induced nuclear and cytoplasmic foci of colocalizing conjugated ubiquitin that could be rescued from the ubiquitin-proteasome degradation pathway by the coexpression of VP2 and NS2 isoforms. These results suggest a role for VP2 in viral morphogenesis by assisting cytoplasmic folding of VP1/VP2 subviral complexes, which is further supported by the capacity of NLM-bearing transport-competent VP2 subunits to recruit VP1 into the nuclear capsid assembly pathway regardless of the BC composition. Instead, all four BC sequences, which are located in the interior of the capsid, were absolutely required by the incoming infectious MVM particle for the onset of infection, suggesting either an important conformational change or a disassembly of the coat for nuclear entry of a VP1-associated viral genome. Therefore, the evolutionarily conserved BC sequences and NLM domains provide complementary nuclear transport functions to distinct supramolecular complexes of capsid proteins during the autonomous parvovirus life cycle.

Individual Rotavirus-like Particles Containing 120 Molecules of Fluorescent Protein Are Visible in Living Cells

Rotaviruses are large, complex icosahedral particles consisting of three concentric capsid layers. When the innermost capsid protein VP2 is expressed in the baculovirus-insect cell system it assembles as core-like particles. The amino terminus region of VP2 is dispensable for assembly of virus-like particles (VLP). Coexpression of VP2 and VP6 produces double layered VLP. We hypothesized that the amino end of VP2 could be extended without altering the auto assembly properties of VP2. Using the green fluorescent protein (GFP) or the DsRed protein as model inserts we have shown that the chimeric protein GFP (or DsRed)-VP2 auto assembles perfectly well and forms fluorescent VLP (GFP-VLP2/6 or DsRed-VLP2/6) when coexpressed with VP6. The presence of GFP inside the core does not prevent the assembly of the outer capsid layer proteins VP7 and VP4 to give VLP2/6/7/4. Cryo-electron microscopy of purified GFP-VLP2/6 showed that GFP molecules are located at the 5-fold vertices of the core. It is possible to visualize a single fluorescent VLP in living cells by confocal fluorescent microscopy. In vitro VLP2/6 did not enter into permissive cells or in dendritic cells. In contrast, fluorescent VLP2/6/7/4 entered the cells and then the fluorescence signal disappear rapidly. Presented data indicate that fluorescent VLP are interesting tools to follow in real time the entry process of rotavirus and that chimeric VLP could be envisaged as "nanoboxes" carrying macromolecules to living cells.

Assembly of Viroplasm and Virus-like Particles of Rotavirus by a Semliki Forest Virus Replicon

In this study we have used an expression system based on Semliki Forest virus (SFV) to study assembly and intracellular localization of certain capsid proteins of rotavirus in neurons and mammalian epithelial cells. The complete genes of vp2 (vp2A) and vp6 (vp6A) of group A rotavirus (SA-11) and gene 5 encoding vp6 (vp6C) of porcine group C rotavirus (strain Cowden/AmC-1) were inserted into an SFV expression replicon. Transfection of BHK-21 cells within vitro-made SFV transcripts resulted in a high level of expression of the heterologous genes. Cotransfection with helper RNA encoding the SFV structural proteins, but lacking the genomic RNA packing signal, resulted in production of recombinant infectious virus. Immunological and biochemical analysis revealed that vp6 was expressed to high levels in primary neurons and mammalian epithelial cells and that vp6 was retained as an authentic homotrimer, stabilized by noncovalent interactions with native antigenic determinants. Thin section electron microscopy analysis revealed that vp6 alone assembled into viroplasm-like structures in the cytoplasm. While coexpression of vp2 and vp6 of group A rotavirus resulted in formation of single-shelled-like particles, no evidence of intracellular assembly was found, suggesting that other viral proteins are required for intracellular formation of single-shelled particles. A notable observation was that the vp6 proteins of group A and C rotaviruses showed different immunofluorescence patterns in BHK-21 cells; vp6C displayed an intense punctate immunofluorescence pattern, while vp6A was characterized by a pronounced filamentous staining in close vicinity to the cytoskeleton.

Characterization of virus-like particles produced by the expression of rotavirus capsid proteins in insect cells

Rotaviruses are triple-layered particles that contain four major capsid proteins, VP2, VP4, VP6, and VP7, and two minor proteins, VP1 and VP3. We have cloned each of the rotavirus genes coding for a major capsid protein into the baculovirus expression system and expressed each protein in insect cells. Coexpression of different combinations of the rotavirus major structural proteins resulted in the formation of stable virus-like particles (VLPs). The coexpression of VP2 and VP6 alone or with VP4 resulted in the production of VP2/6 or VP2/4/6 VLPs, which were similar to double-layered rotavirus particles. Coexpression of VP2, VP6, and VP7, with or without VP4, produced triple-layered VP2/6/7 or VP2/4/6/7 VLPs, which were similar to native infectious rotavirus particles. The VLPs maintained the structural and functional characteristics of native particles, as determined by electron microscopic examination of the particles, the presence of nonneutralizing and neutralizing epitopes on VP4 and VP7, and hemagglutination activity of the VP2/4/6/7 VLPs. The production of VP2/4/6 particles indicated that VP4 interacts with VP6. Cell binding assays performed with each of the VLPs indicated that VP4 is the viral attachment protein. Chimeric particles containing VP7 from two different G serotypes also were obtained. The ability to express individual proteins or to coexpress different subsets of proteins provides a system with which to examine the interactions of the rotavirus structural proteins, the role of individual proteins in virus morphogenesis, and the feasibility of a subunit vaccine.

Structure of Correctly Self-Assembled Bluetongue Virus-like Particles

Bluetongue virus-like particles (VLPs), synthesized by coexpression of VP2, VP3, VP5, and VP7 using recombinant baculoviruses, have been examined by cryoelectron microscopy and image analysis. The 3-D reconstruction of these VLPs reveals an icosahedral structure 86 nm in diameter with essentially the same features as for the native Bluetongue virus (BTV) particle. The VLP is thus shown to contain the four constituent proteins as the native virus particle, with each of the protein positions highly occupied. Since the BTV core-like particle formed by coexpression of VP3 and VP7 lacks five VP7 trimers around each of the five-fold axes, it appears that the presence of the outer capsid proteins VP2 and VP5 is necessary for the adhesion of these VP7 trimers around the five-fold axes. The observed spontaneous formation of complete VLP in the absence of the BTV nonstructural proteins implies that the nonstructural proteins are not necessary for the formation of the double-shelled viral capsid. However, the nonstructural proteins may be involved in different aspects of genome replication and packaging.

Cooperation of structural proteins during late events in the life cycle of polyomavirus.

The polyomavirus minor late capsid antigen, VP2, is myristylated on its N-terminal glycine, this modification being required for efficient infection of mouse cells. To study further the functions of this antigen, as well as those of the other minor late antigen, VP3, recombinant baculoviruses carrying genes for VP1, VP2, and VP3 have been constructed and the corresponding proteins have been synthesized in insect cells. A monoclonal antibody recognizing VP1, alpha-PyVP1-A, and two monoclonal antibodies against the common region of VP2 and VP3, alpha-PyVP2/3-A and alpha-PyVP2/3-B, have been generated. Reactions of antibodies with antigens were characterized by indirect immunofluorescence, immunoprecipitation, and immunoblot analysis. Immunofluorescent staining of mouse cells infected with polyomavirus showed all antigens to be localized in nuclei. When the late polyomavirus proteins were expressed separately in insect cells, however, only VP1 was efficiently transported into the nucleus; VP2 was localized discretely around the outside of the nucleus, and VP3 exhibited a diffused staining pattern in the cytoplasm. Coexpression of VP2, or VP3, with VP1 restored nuclear localization. Immunoprecipitation of infected mouse cells with either anti-VP1 or anti-VP2/3 antibodies precipitated complexes containing all three species, consistent with the notion that VP1 is necessary for efficient transport of VP2 and VP3 into the nucleus. Purified empty capsid-like particles, formed in nuclei of insect cells coinfected with all three baculoviruses, contained VP2 and VP3 proteins in amounts comparable to those found in empty capsids purified from mouse cells infected with wild-type polyomavirus. Two-dimensional gel analysis of VP1 species revealed that coexpression with VP2 affects posttranslational modification of VP1.

Expression of the major capsid protein VP6 of group C rotavirus and synthesis of chimeric single-shelled particles by using recombinant baculoviruses.

VP6 of group C (Cowden strain) rotavirus was expressed in the baculovirus system. The recombinant protein, expressed to a high level in insect cells, was purified by ion-exchange chromatography. The purified protein was proven to be trimeric. The effect of pH on the trimer's stability was investigated. Coexpression of VP6 from group A (bovine strain RF) and VP6 from group C in the baculovirus system did not result in the formation of chimeric trimers. Coexpression of VP2 from group A rotavirus (bovine strain RF) and VP6 from group C in the baculovirus system led to the formation of chimeric, empty, single-shelled particles. These results demonstrate conservation in the domains necessary for binding to VP2 in different serogroups of VP6. The locations of the domains involved in trimerization and in the interaction with VP2 are discussed.

Expression of rotavirus VP2 produces empty corelike particles

The complete VP2 gene of bovine rotavirus strain RF has been inserted into the baculovirus transfer vector pVL941 under the control of the polyhedrin promoter. Cotransfection of Spodoptera frugiperda 9 cells with wild-type baculovirus DNA and transfer vector DNA led to the formation of recombinant baculoviruses which contain bovine rotavirus gene 2. Infection of S. frugiperda cells with this recombinant virus resulted in the production of a protein similar in size and antigenic properties to the authentic rotavirus VP2. The protein binds double-stranded RNA and DNA in an overlay protein blot assay. Expressed VP2 assembles in the cytoplasm of infected cells in corelike particles 45 nm in diameter. These corelike particles were purified by sucrose gradient centrifugation and found to be devoid of nucleic acid. Coexpression of VP2 and VP6 from heterologous rotavirus strains (bovine and simian) resulted in the formation of single-shelled particles. These results definitively show the existence of an innermost protein shell in rotavirus which is formed independently of other rotavirus proteins. These results have implications for schemes of rotavirus morphogenesis.