Code-division Multiple-access Mobile Systems Research Articles

Evaluation of Downlink Performance of a Multiple-Cell, Rake Receiver Assisted CDMA Mobile System

In wireless Code Division Multiple Access (CDMA) system, the use of power control is indispensable to combat near-far and fading problems. Signals transmitted over a multipath propagation channel which exhibits inter-path interference and fading. The receiver has to employ measures to mitigate these effects or it will incur severe performance degradation. A classic approach in CDMA communications is the rake receiver. In this paper, the downlink performance is estimated for a CDMA mobile system at the vertex of multiple adjacent cells. At the base station the received signal is coherently dispread and demodulated using a rake receiver. The effects of power control, error correction and rake receiver were also investigated on the assumption that the received signals undergo Rayleigh fading, lognormal shadowing, and frequency selective fading. The evaluation of performance measures of base to mobile link (downlink) of a multiple-cell CDMA mobile system is presented. This study demonstrates that significant performance improvements are achievable with combined use of power control, rake receiver and error correction scheme.

Achievable-SIR-based predictive closed-loop power control in a CDMA mobile system

A power control algorithm with two prediction models based on an achievable signal-to-interference power ratio (SIR) has been proposed under a multipath Rayleigh fading environment in a code-division multiple-access (CDMA) mobile system. An achievable SIR is defined as the maximum-minimum SIR among all users at a particular time step. The corresponding mobile transmission powers are denoted as the "optimum transmission powers." In the individual power predictor (IPP) model, a linear transversal filter is assigned to each user. The output of the IPP, which is a linear combination of the optimum transmission powers of the mobile during the current and previous power measurement periods, predicts the optimum transmission power of the mobile in the next time step. In the global power predictor (GPP) model, a single predictor, constructed by a linear neural network, is used to predict the optimum transmission powers of all mobiles in the next time step. In both predictor models, the weights of the predictors are updated by using the recursive least squares algorithm. To further improve the performance, a reduced power-measurement period has been studied. Simulation results show that the proposed power control algorithm can achieve a lower outage probability and a smaller dynamic range of transmission power compared with a conventional power control scheme.

Integrated call control in a CDMA cellular system

Soft handoff is an essential component of code-division multiple-access (CDMA) digital mobile communication systems. While soft handoff has some advantages of system capacity and communication quality, it also has some disadvantages arising from the excessive use of channel resources. In this study, we propose a new control policy to alleviate effectively this excessive use of channel resources. For CDMA cellular mobile systems consisting of homogeneous cells, a variety of traffic parameters are estimated by the detailed traffic analysis, based on which a Markovian queueing model is developed to analyze the performance of the proposed call control policy. With a well-known performance objective, a mathematical problem of finding optimal call control parameters is proposed, along with its solution method.

Capacity unbalance between uplink and downlink in spectrally overlaid narrow-band and wide-band CDMA mobile systems

In this paper, we discuss unbalance between uplink (mobile-to-base) and downlink (base-to-mobile) in future code division multiple access (CDMA) radio networks where both narrow-band and wide-band CDMA systems are coexisted. Since the two links are not operated in an identical condition, their capacities are unequal and either of the links determines the whole system capacity. The purpose of this paper is to examine which link limits the system and what are the limiting factors. To facilitate the examination, transmission capacity and connection capacity are defined, and simplified formulas are presented to compute those capacities, respectively for uplink and downlink. Signal quality required for each link, effectiveness of power control, spatial distribution of mobile users and other-cell as well as same-cell user interference are usually determining the limiting link. Besides, the traffic unbalance between the links imposed by specific service applications and the network evolution scenarios are also shown to be very influencing factors.

Performance of optimum transmitter power control in CDMA cellular mobile systems

Efficient power control is of great importance in the design of high-capacity cellular radio systems. Optimum power control scheme (OPCS), in the sense that it minimizes the outage probability, has been fully investigated for frequency-division multiple-access/time-division multiple-access (FDMA/TDMA) cellular systems. In this paper, optimum power control theory is introduced to code-division multiple-access (CDMA) cellular systems to derive upper performance bounds for all types of transmitter power control schemes. Simulation results indicate that the OPCS will increase the CDMA system capacity by more than 1.9 dB over the perfect average power control scheme under IS-95-defined radio condition.

An Improved Base Station Modulator Design for a CDMA Mobile System

We propose a new method to eliminate completely the redundant elements in a CDMA (code division multiple access) mobile system. First, we define multilevel logic operation (MLO), which is a new concept to deal with the multilevel logic signals. We prove that the conventional binary logic concept is a subset of the MLO concept. The multilevel logic signal can be directly controlled by using this MLO in place of the binary operation. We applied the MLO to the CDMA base station modulator (BSM) in order to reduce the hardware complexity. In the case of a 3-sectorized cell, this method helps reduce the complexity down the level of below 1% of the conventional CDMA BSM for spreading and filtering, and to 50% for Walsh covering.

Soft handoffs in CDMA mobile systems

This article presents an overview of soft handoff, an idea which is becoming quite important because of its use in the IS-95 code-division multiple access (CDMA) cellular phone standard. The benefits and disadvantages of using soft handoff over hard handoff are discussed, with most results drawn from the available literature. The two most well-known benefits are fade margin improvement and higher uplink capacity, while disadvantages include increased downlink interference and more complex implementation. Handoff parameter optimization is extremely important, so various studies on the trade-offs to be considered when selecting these parameters are surveyed, from both the link quality and resource allocation perspectives. Finally, research directions and future trends are discussed.

An expert system approach for cellular CDMA

The demand for cordless communication has forced suppliers to exploit digital technology to satisfy the increasing demand for service. This demand has led to severe capacity limitations in many areas and spread spectrum techniques are being considered as one means to support these services. It is generally accepted that system control in the future will make use of intelligent processors. In this study we delineate an expert system to be used as an intelligent controller for a cell site working in a CDMA (Code Division Multiple Access) mobile cellular telecommunications system. An existing AI shell is used for program development and simulation and the results are discussed in terms of the benefits obtained by using an expert system approach in the highly dynamic environment of cellular mobile communications.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>