Cobalt Oxide Research Articles

Metal-Organic Framework PCN-224 Combined Cobalt Oxide Nanoparticles for Hypoxia Relief and Synergistic Photodynamic/Chemodynamic Therapy.

Photodynamic therapy (PDT) and chemodynamic therapy (CDT) are promising tumor treatments mediated by reactive oxygen species (ROS), which have the advantages of being minimally invasive. However, the hypoxia of tumor microenvironment and poor target ability often reduce the therapeutic effect. Here we propose a tumor targeted nanoplatform PCN-224@Co3O4-HA for enhanced PDT and synergistic CDT, constructed by hyaluronate-modified Co3O4 nanoparticles decorated metal-organic framework PCN-224. Co3O4 can catalyze the decomposition of highly expressed H2O2 in tumor cells to produce oxygen and alleviate the problem of hypoxia. It can also produce hydroxyl radicals according to the Fenton-like reaction for chemical dynamic therapy, significantly improving the therapeutic effect. The cell survival experiment showed that after in vitro treatment, 4T1 and MCF-7 cancer cells died in a large area under the anaerobic state, while the survival ability of normal cell L02 was nearly unchanged. This result effectively indicated that PCN-224@Co3O4-HA could effectively relieve tumor hypoxia and improve the effect of PDT and synergistic CDT. Cell uptake experiments showed that PCN-224@Co3O4-HA had good targeting properties and could effectively aggregate in tumor cells. In vivo experiments on mice, PCN-224@Co3O4-HA presented reliable biosafety performance, and can cooperate with PDT and CDT therapy to prevent the growth of tumor.

Spectroscopic Investigations of Complex Electronic Interactions by Elemental Doping and Material Compositing of Cobalt Oxide for Enhanced Oxygen Evolution Reaction Activity

AbstractDoping and compositing are two universal design strategies used to engineer the electronic state of a material and mitigate its disadvantages. These two strategies are extensively applied to design efficient electrocatalysts for water splitting. Using cobalt oxide (CoO) as a model catalyst, it is proven that the oxygen evolution reaction (OER) performance can be progressively improved, first by Fe‐doping to form Fe‐CoO solid solution, and further by the addition of CeO2 to produce a Fe‐CoO/CeO2 composite. X‐ray absorption spectroscopy (XAS) reveals that distinct electronic interactions are induced by the processes of doping and compositing. Fe‐doping of CoO can break down the structural symmetry, changing the electronic structure of both Co and O species at the surface and decreasing the flat‐band potential (Vfb). In comparison, subsequent compositing of Fe‐CoO with CeO2 induces negligible electronic changes in the Fe‐CoO (as seen in ex situ characterizations), but significantly modifies the oxidative transformations of both Co and Fe under OER conditions. The spectroscopic investigations reveal that Fe‐doping and CeO2 compositing play different roles in modifying the electronic properties of CoO in its pristine state and during OER catalysis, in return, providing useful guidance for the design of more efficient electrocatalysts using these two strategies.

Design of symmetric supercapacitor based on Co3O4/Carboxymethyl cellulose nanoflakes with excellent cyclic stability

An advanced electrode material having fine micro/nano-architecture that provide unique qualities like ultra-high charge storage capabilities, high specific area and efficient pathway for ion insertion will always have superior position in the energy sphere. The prime motive of the present work is to fabricate carboxymethyl cellulose (CMC) encapsulated cobalt oxide nanoflakes as pioneered electrodes for supercapacitors. Utilizing a Faradaic candidate (cobalt oxide), which traps charges abundantly that leads to attracting capacitance (381 F g−1 at a specific current of 1 A g−1) with least charge transfer resistance (0.87 Ω). Make use of CMC as host that supports the composite via providing admirable cyclic life (100 % capacitance retention even after 5000 continuous charge/discharge cycles). Un-interrupted charge delivery that probably attributed to the formation of flaky architecture of cobalt oxide which was encapsulated by carbon matrix. As the end, a symmetric supercapacitor was designed using Co3O4/C nanoflakes as both positive and negative electrode. The fabricated two cell could capable of maintaining its stability of 95.87 % from its initial value after 5000 cycles of charge and discharge at a practical current density of 20 A g−1. The outcomes of the present study (three and two cell configuration as well) will open new gateways in energy regime for next generation supercapacitors.

A novel layered cobalt oxide Ba2Co9O14 as an efficient and durable bifunctional oxygen electrocatalyst for rechargeable zinc-air batteries

In this work, a layered cobalt oxide Ba2Co9O14 (BCO), belongs to a Ban+1ConO3n+3(Co8O8) family composed by alternating CdI2 based layers (Co8O8) with n (111) perovskite blocks (Ban+1ConO3n+3), has been developed as a potential bifunctional oxygen electrocatalyst candidate for efficient and durable rechargeable zinc-air battery (ZAB) application. Because of the greatly increased the specific surface area caused by ball-milling, the as-milled BCO material exhibits strongly enhanced bifunctional electrocatalytic activity towards oxygen reduction and oxygen evolution reaction in alkaline medium. Moreover, the assembled BCO-based ZAB yields an effectively improved maximum output power density of 166 mW cm−2, a considerable specific capacity of 789 mAh g−1, and excellent charge-discharge cycle stability of over 250 h at 10 mA cm−2 with over 1500 cycles.

Green Fabrication of Cobalt Oxide Nanoparticles by Bacillus megaterium and Their Antibacterial Activities

Green Fabrication of Cobalt Oxide Nanoparticles by Bacillus megaterium and Their Antibacterial Activities

Synthesis and characterization of nitrogen-doped-MWCNT@cobalt oxide for nerve agent simulant detection

Organophosphorus nerve agents are toxic compounds that disrupt neuromuscular transmission by inhibiting the neurotransmitter enzyme, acetylcholinesterase, leading to rapid death. A hybrid composite was synthesized using a hydrothermal process for the early detection of dimethyl methyl phosphonate (DMMP), a simulant of the G-series nerve agent, sarin. Quartz crystal microbalance (QCM) and surface acoustic wave (SAW) sensors were used as detectors. Nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs), cobalt oxide (Co3O4), and N-MWCNT@Co3O4 were compared to detect DMMP concentrations of 25–150 ppm. At 25 ppm, the differential frequencies (Δf) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors were 5.8, 2.3, and 99.5 Hz, respectively. The selectivity results revealed a preference for the DMMP rather than potential interference. The coefficients of determination (R2) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 25–150 ppm DMMP were 0.983, 0.986, and 0.999, respectively. The response times of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 100 ppm DMMP were 25, 27, and 34 s, respectively, while the corresponding recovery times were 85, 105, and 181 s. The repeatability results revealed the reversible adsorption and desorption phenomena for the fixed DMMP concentration of 100 ppm. These unique findings show that synthesized materials can be used to detect organophosphorus nerve agents.

Efficient Leaching of Metal Ions from Spent Li-Ion Battery Combined Electrode Coatings Using Hydroxy Acid Mixtures and Regeneration of Lithium Nickel Manganese Cobalt Oxide

Extensive use of Li-ion batteries in electric vehicles, electronics, and other energy storage applications has resulted in a need to recycle valuable metals Li, Mn, Ni, and Co in these devices. In this work, an aqueous mixture of glycolic and lactic acid is shown as an excellent leaching agent to recover these critical metals from spent Li-ion laptop batteries combined with cathode and anode coatings without adding hydrogen peroxide or other reducing agents. An aqueous acid mixture of 0.15 M in glycolic and 0.35 M in lactic acid showed the highest leaching efficiencies of 100, 100, 100, and 89% for Li, Ni, Mn, and Co, respectively, in an experiment at 120 °C for 6 h. Subsequently, the chelate solution was evaporated to give a mixed metal-hydroxy acid chelate gel. Pyrolysis of the dried chelate gel at 800 °C for 15 h could be used to burn off hydroxy acids, regenerating lithium nickel manganese cobalt oxide, and the novel method presented to avoid the precipitation of metals as hydroxide or carbonates. The Li, Ni, Mn, and Co ratio of regenerated lithium nickel manganese cobalt oxide is comparable to this metal ratio in pyrolyzed electrode coating and showed similar powder X-ray diffractograms, suggesting the suitability of α-hydroxy carboxylic acid mixtures as leaching agents and ligands in regeneration of mixed metal oxide via pyrolysis of the dried chelate gel.

CFD analysis of paraffin-based hybrid (Co–Au) and trihybrid (Co–Au–ZrO2) nanofluid flow through a porous medium

Abstract Ternary hybrid nanofluids possess improved thermal characteristics, enhanced stability, better physical strength, and multi-functionality as compared to hybrid or usual nanofluids. The aim of the ongoing study is to explore the novel thermal attributes of hybrid and trihybrid nanofluids through a porous medium. Whereas the nano-composition of cobalt (Co), gold (Au), and zirconium oxide (ZrO2) make amalgamation in the paraffin (Pfin) which is a base fluid. This nano-composition of the proposed nanoparticles, specifically, subject to the base fluid Pfin has not been interpreted before. The analysis not only covers the features of trihybrid nanofluids (Co–Au–ZrO2–Pfin) but it also describes the characteristics of hybrid (Co–Au–Pfin) as well as pure nanofluids (Co–Pfin). An efficient numerical algorithm is developed for which the numerical simulations are carried out. The approximations are performed in MATLAB software using “Successive under Relaxation (SUR)” technique. A comparison, under certain limiting conditions, with the established results appraises the efficiency of the numerical code. The outcomes evidently designate that temperature raises with the change in thermal radiation and volume fraction of gold and zirconium oxide in either case of pure, hybrid, or ternary nanofluids. The concentration ϕ 3 {\phi }_{3} of ZrO2 has a significant impact on Nusselt number rather than the concentration ϕ 1 {\phi }_{1} of cobalt and ϕ 2 {\phi }_{2} of gold. It has been comparatively noticed that the ternary nanofluids (Co–Au–ZrO2–Pfin) portray embellished and improvised thermal characteristics as compared to the other two cases.

Enhanced Low-Temperature Resistance of Lithium-metal Rechargeable Batteries Based on Electrolyte Including Ethyl Acetate and LiDFOB Additives.

To meet the demand for higher energy density in lithium-ion batteries and expand their application range, coupling lithium metal anodes with high-voltage cathodes is an ideal solution. However, the compatibility between lithium metal batteries and electrolytes affects their applicability. In this study, proposes a locally concentrated electrolyte based on ethyl acetate (EA) as the solvent, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as the lithium salt, and lithium difluorooxoborate (LiDFOB) as a sacrificial agent to enhance the low-temperature and high-voltage endurance of Li//Lithium cobalt oxide (LCO) batteries. The Li//LCO battery can operate within the voltage range of 3 to 4.5 V, with an initial discharge specific capacity of 174.5 mAh g-1 at 20 oC. At -40 oC, after 200 cycles, the capacity retention rate is 87.7%. It can operate under extreme conditions of -70 oC, with a discharge specific capacity of 112.6 mAh g-1. Additionally, LCO//HC batteries using this electrolyte demonstrate excellent performance. Present work provides a new perspective for the optimization of electrolytes for low-temperature lithium-ion batteries.

Progress on Copper-Based AnodeMaterials for Sodium-Ion Batteries.

Fossil fuels have clearly failed to meet people's growingenergy needs due to their limited reserves, potential pollution of the environment, and high costs.The development of cleaner, renewable energy sources as well as secondary batteries for energy storage is imminent, in a modern society where energy demand is soaring. Sodium-ion batteries (SIBs) have become the focus of large-scale energy storage systems as a promising alternative to lithium-ion batteries. The development of SIBs relies on the construction of high performance electrode materials. The design of low cost and high performance anode materials is a key link in this regard. Copper-based anodes are characterised by high theoretical capacity, abundant reserves, low cost and environmental friendliness. A variety of copper-based anode materials, which include cobalt oxides, sulfides, selenides and phosphides, have been synthesised and evaluated in the scientific literature for sodium storage. In detail, the preparation methods, response mechanisms, strengths and weaknesses, the relationship between morphology structure and electrochemical performance are discussed, as well as highlighting strategies to improve the electrochemical performance of copper-based anode materials. Finally, we offer our perspective on the challenges and potential for the development of copper-based anodes as a means of developing practical and high performing SIBs.

Effect of Ni-Doping on Seebeck Coefficient of LaCoO<sub>3</sub> System

The aim of this study is discussing the results achieved on undoped and Ni-doped bulk LaCoO3 samples synthesized by solid-state reaction. The crystal structures of the samples were analyzed by x – ray diffraction (XRD) and Rietveld refinement of the XRD patterns was used to test the quality of the samples, the results of this procedure confirmed a single phase of LaCo1-xNixO3 for (x=0 and 0.05) with rhombohedral crystal structure (space group :). The main interest in this class of materials is the possibility of improving the values of Seebeck coefficient and electrical resistivity through chemical doping. The Seebeck coefficient and electrical resistivity were investigated from room temperature (RT) to 450 K, near RT the LaCoO3 system showed a large negative Seebeck coefficient, but it changed to positive value with increasing temperature while the LaCo0.95Ni0.05O3 composition showed a positive Seebeck coefficient throughout all the temperature range. Hence, within this study the Ni substitution led to decrease the electrical resistivity of the samples to one order of magnitude as a result of the partial substitution of Co3+ in LaCoO3 by Ni2+. LaCoO3 was chosen for this thermoelectric test because cobalt oxides have extensive applications.

Stabilized Nickel‐Rich‐Layered Oxide Electrodes for High‐Performance Lithium‐Ion Batteries

Next‐generation Li‐ion batteries are expected to exhibit superior energy and power density, along with extended cycle life. Ni‐rich high‐capacity layered nickel manganese cobalt oxide electrode materials (NMC) hold promise in achieving these objectives, despite facing challenges such as capacity fade due to various degradation modes. Crack formation within NMC‐based cathode secondary particles, leading to parasitic reactions and the formation of inactive crystal structures, is a critical degradation mechanism. Mechanical and chemical degradation further deteriorate capacity and lifetime. To mitigate these issues, an artificial cathode electrolyte interphase can be applied to the active material before battery cycling. While atomic layer deposition (ALD) has been extensively explored for active material coatings, molecular layer deposition (MLD) offers a complementary approach. When combined with ALD, MLD enables the deposition of flexible hybrid coatings that can accommodate electrode material volume changes during battery operation. This study focuses on depositing ‐titanium terephthalate thin films on a electrode via ALD‐MLD. The electrochemical evaluation demonstrates favorable lithium‐ion kinetics and reduced electrolyte decomposition. Overall, the films deposited through ALD‐MLD exhibit promising features as flexible and protective coatings for high‐energy lithium‐ion battery electrodes, offering potential contributions to the enhancement of advanced battery technologies and supporting the growth of the EV and stationary battery industries.

Enhancing Interaction between Lanthanum Manganese Cobalt Oxide and Carbon Black through Different Approaches for Primary Zn-Air Batteries.

Due to the need for decarbonization in energy generation, it is necessary to develop electrocatalysts for the oxygen reduction reaction (ORR), a key process in energy generation systems such as fuel cells and metal-air batteries. Perovskite-carbon material composites have emerged as active and stable electrocatalysts for the ORR, and the interaction between both components is a crucial aspect for electrocatalytic activity. This work explores different mixing methods for composite preparation, including mortar mixing, ball milling, and hydrothermal and thermal treatments. Hydrothermal treatment combined with ball milling resulted in the most favorable electrocatalytic performance, promoting intimate and extensive contact between the perovskite and carbon material and improving electrocatalytic activity. Employing X-ray photoelectron spectroscopy (XPS), an increase in the number of M-O-C species was observed, indicating enhanced interaction between the perovskite and the carbon material due to the adopted mixing methods. This finding was further corroborated by temperature-programmed reduction (TPR) and temperature-programmed desorption (TPD) techniques. Interestingly, the ball milling method results in similar performance to the hydrothermal method in the zinc-air battery and, thus, is preferable because of the ease and straightforward scalability of the preparation process.

Synergy between Fe-Co oxide catalysts supported over HZSM-5 for direct conversion of methane to methanol

The direct conversion of methane to methanol over iron and cobalt oxide based composite catalysts supported over HZSM-5 was carried out in a fixed-bed micro reactor under changing process parameters and catalyst compositions. The prepared catalysts were well characterized by various techniques including N2 adsorption desorption, X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FTIR), pyridine FTIR, X-ray photoelectron spectroscopy (XPS), UV–vis spectroscopy and temperature programmed reduction (H2-TPR). The characterization results revealed the presence of various reducible iron and cobalt oxide species depending on the Fe/Co molar ratio and total metal oxide loading. Moreover, the XPS and UV–vis spectroscopic results also confirmed the variation of Fe2+/Fe3+ and Co2+/Co3+ species depending on the Fe-Co molar ratio which had strong influence on the performance of the composite catalysts. It was found that the cobalt species favours the formaldehyde formation whereas the iron species promotes the formic acid formation in their respective pure supported oxide catalysts. However, the synergistic effect of iron and cobalt oxide in equimolar ratio in composite catalysts appeared as effective for achieving highest yield of methanol. The methanol selectivity was also influenced by the alteration of various studied process parameters. The higher reaction temperature favoured the overoxidation of methanol to CO2 whereas the methanol selectivity increased with increasing the methane to oxygen ratio. The lattice to adsorbed oxygen ratio also had strong influence on the activity of composite catalysts and methanol selectivity. The highest methanol yield of 1.87% was achieved at the methane conversion of 42.81 % with the 20Fe1Co1Z catalyst at 873 K reaction temperature with CH4/O2 ratio of 2:1 and WHSV of 1030 ml hr−1 gcat−1.

Rapid fabrication of binder free nickel cobalt oxide electrodes with dendritic nanostructure for electrochemical energy storage applications

A rapid and facile technique to synthesize nickel cobalt oxide electrodes by photothermal treatment of mixed organometallic precursor solution is reported. Using short and intense pulses of light from a xenon flash lamp, spray coated films are converted into porous nickel cobalt oxide electrodes with dendritic nanostructure. The electrode films fabricated in a few seconds show excellent energy storage properties as supercapacitor electrodes. Specific capacitance of up to 116 Fg−1 and capacitance retention of up to 75 % were observed in samples with low mass loading. Analysis of the cyclic voltammetry (CV) curves shows that capacitance is the dominating charge storage mechanism in these films. To study the effect of varying the mass loading in electrodes, double and triple layered electrodes were also studied. In films with high mass loading, the specific capacitance of the films decreased but areal capacitance continued to increase. A high areal capacitance of up to 243 mFcm−2 is observed in films with high mass loading. CV curve analysis of high mass loading electrodes further shows that in films with higher mass loading, the charge storage mechanism is a mix of capacitance and diffusion processes. The contribution of diffusion increased with increase in the mass loading of the electrodes. This study sheds light into the mechanism of charge storage in electrodes prepared by large-scale-amenable single step process of photonic curing which could be utilized to fabricate electrodes in industrial scale.

Photocatalytic and antibacterial activity of green synthesized yttrium doped cobalt oxide nanoparticles using tender coconut water (Cocos nucifera)

Photocatalytic and antibacterial activity of green synthesized yttrium doped cobalt oxide nanoparticles using tender coconut water (Cocos nucifera)

Chemical vapor deposition-grown single-layer graphene-supported nanostructured Co3O4 composite as binder-free electrode for asymmetric supercapacitor and electrochemical detection of caffeic acid

In this study, we developed a monolayer graphene/nanostructured cobalt oxide (MLG/Co3O4) composite for asymmetric supercapacitor and electrochemical sensor applications. The MLG was grown by chemical vapor deposition process and the Co3O4 nanostructures were electrodeposited on the MLG surface. Scanning electron microscopy proved that there were flower-like nanostructured Co3O4 densely electrodeposited on the MLG surface. At a current density of 3 mA cm−2, the MLG/Co3O4 composite produced an areal capacitance of 3.73 F cm−2. After 10,000 cycles, the composite electrode still had 93.6 % of its initial capacitance at 5 mA cm−2. The asymmetric system displayed an areal capacitance of 929 mF cm−2 at 4 mA cm−2 with good cycle stability. The asymmetric electrode produced a specific energy of 51 μWh cm−2 and a specific power of 11.1 mW cm−2. Cyclic voltammetric measurements demonstrated that the composite showed redox peaks at 0.48 eV and 0.09 eV toward the determination of CA. With a sensitivity of 0.13 µA/µM/cm2 and a limit of detection of 0.009 µM, the composite showed CA concentrations, ranging from 0.5 to 480 M. The composite displayed excellent selectivity and the current produced for the interfering compounds was exceedingly low. Using the composite electrode, the spiked CA in red wine and green tea samples recovered remarkably effectively.

Nickel-copper-cobalt mixed oxide electrode material for high performance asymmetric supercapacitor

Nickel copper cobalt oxide (NiCuCoO) ternary metal oxide nanoparticles were synthesized by employing the hydrothermal method. NiCuCoO electrode demonstrates a specified capacity of 596 C g−1 at 1 A g−1, high capacitance retaining of 99% even if 1000 sequences at the density of current 10 A g−1, and significant extended cyclic strength over 1000 sequences. The gathered asymmetric supercapacitor (ASC) tool via NiCuCoO as the cathode and activated carbon as anode materials achieve a specified capacity of 168 C g−1 at a current density of 1 Ag−1, an excellent capacity retaining of 95% even later than 5000 sequences at a density of current 10 A g−1. The fabricated device exhibits a high density of energy and power is 96 Wh kg−1 and 841 W kg−1. The prepared material confirms an excellent capacitance routine, so this work represents for a next-generation energy storage device.

Effect of Mo and W co-doping on optical, morphological, electrical and electrochemical properties of Co3O4 thin film

In this study, it was aimed to produce cobalt oxide (Co3O4) thin films with improved optical, electrical, and electrochemical properties for device applications with a simple and low-cost method. Mo, W, and dual Mo and W at the ratio 10 wt% of Co3O4 were added into the solutions. The prepared solutions were coated on glass substrates by spin coating method. The produced thin films' structural, morphological, optical, electrical, and electrochemical properties were examined. As a result of doping, the optical, morphological, conductivity, and electrochemical properties of Co3O4 thin films improved and more stable structures were formed. The Mo and W co-doping provided the most improvement in the properties of the Co3O4 thin film. The results obtained showed that the Mo and W co-doped Co3O4 thin film is a potential candidate for highly efficient electrochemical applications.

Multivariate Bayesian Optimization of CoO Nanoparticles for CO2 Hydrogenation Catalysis.

The hydrogenation of CO2 holds promise for transforming the production of renewable fuels and chemicals. However, the challenge lies in developing robust and selective catalysts for this process. Transition metal oxide catalysts, particularly cobalt oxide, have shown potential for CO2 hydrogenation, with performance heavily reliant on crystal phase and morphology. Achieving precise control over these catalyst attributes through colloidal nanoparticle synthesis could pave the way for catalyst and process advancement. Yet, navigating the complexities of colloidal nanoparticle syntheses, governed by numerous input variables, poses a significant challenge in systematically controlling resultant catalyst features. We present a multivariate Bayesian optimization, coupled with a data-driven classifier, to map the synthetic design space for colloidal CoO nanoparticles and simultaneously optimize them for multiple catalytically relevant features within a target crystalline phase. The optimized experimental conditions yielded small, phase-pure rock salt CoO nanoparticles of uniform size and shape. These optimized nanoparticles were then supported on SiO2 and assessed for thermocatalytic CO2 hydrogenation against larger, polydisperse CoO nanoparticles on SiO2 and a conventionally prepared catalyst. The optimized CoO/SiO2 catalyst consistently exhibited higher activity and CH4 selectivity (ca. 98%) across various pretreatment reduction temperatures as compared to the other catalysts. This remarkable performance was attributed to particle stability and consistent H* surface coverage, even after undergoing the highest temperature reduction, achieving a more stable catalytic species that resists sintering and carbon occlusion.