Coated-type Chiral Stationary Phases Research Articles

Synthesis by carbonate aminolysis and chiral recognition ability of cellulose 2,3-bis(3,5-dimethylphenyl carbamate)-6-(α-phenylethyl carbamate) selectors

Novel chiral selectors based on cellulose 2,3-bis(3,5-dimethylphenyl carbamate)-6-(α-phenylethyl carbamate) were regioselectively synthesized by carbonate aminolysis and isocyanate chemistry. By oxycarbonylation with phenyl chloroformate, carbamoylation with 3,5-dimethylphenyl isocyanate, and subsequent aminolysis of the previously introduced reactive carbonate moiety at C6 with enantiopure (R)-or (S)-α-phenylethylamine, chiral selectors have been obtained, which regioselectively carry two different phenyl carbamate substituents. The cellulose derivatives were comprehensively characterized by ATR-FTIR, solid-state NMR, GPC, and elemental analysis. In parallel, 3-aminopropyl-functionalized silica gel as an inert carrier material for the chiral selectors was prepared and the obtained coated-type chiral stationary phases were characterized by both solid-state 29Si NMR, 13C NMR, and elemental analysis. The enantioseparation performance of the chiral selectors was studied and compared to cellulose tris(3,5-dimethylphenyl carbamate) as a reference. With this protocol in hand, certain shortcomings of conventional approaches towards the regioselective synthesis of polysaccharide-based chiral selectors were overcome, such as the limitation to standard isocyanate reagents, being able to apply now the whole wealth of commercially available (chiral) primary and also secondary alkylamines instead.Graphical abstract

The interactions between chiral analytes and chitosan-based chiral stationary phases during enantioseparation

The goal of the present study was to disclose the interactions between chitosan-type chiral selectors (CSs) and chiral analytes during enantioseparation. Hence, six chitosan 3,6-bis(phenylcarbamate)-2-(cyclohexylmethylurea)s were synthesized and characterized. These chitosan derivatives were employed as CSs with which the corresponding coated-type chiral stationary phases (CSPs) were prepared. According to the nature and position of the substituents on the phenyl group, the CSs and CSPs were divided into three sets. The counterparts of the three sets were 3,5-diMe versus 3,5-diCl, 4-Me versus 4-Cl and 3-Me versus 3-Cl. The enantioseparation capability of the CSPs was evaluated with high-performance liquid chromatography. The CSPs demonstrated a good enantioseparation capability to the tested chiral analytes. In enantioselectivity, the CSs with 3,5-diCl and with 4-Me roughly were better than the counterparts with 3,5-diMe and with 4-Cl respectively. The CS with 3-Me enantiomerically recognized more analytes than the one with 3-Cl, but showed lower separation factors in more enantioseparations. The acidity of the amide hydrogen in the phenylcarbamates was investigated with density functional theory calculations and 1H NMR measurements. The trend of the acidity variation with different substituents on the phenyl group was confirmed by the retention factors of acetone on the CSPs. Compared the retention factors of analytes on every set of the counterparts, the formation of hydrogen bond (HB) in enantioseparation could be outlined as follows: when the CSs interacted with chiral analytes without reactive hydrogen but with lone paired electrons, the carbamate N‒Hs in the CSs were HB donors and the analytes were HB acceptors; if the CSs interacted with analytes with a reactive hydrogen, the role of the CSs in HB formation was related to the acidity of the reactive hydrogen; the patterns of HB formation between the CSs and analytes were also impacted by compositions of mobile phases, in addition to the nature, number and position of substituents on the phenyl group. Based on the discussion, chiral recognition mechanism could be understood in more detail. Besides, the strategy to improve enantioseparation capability of a CSP by introducing a substituent onto phenyl group was clarified and further comprehended.

Synthesis of poly(phenylacetylene)s containing chiral phenylethyl carbamate residues as coated-type CSPs with high solvent tolerability.

Two novel helical poly(phenylacetylene) derivatives containing chiral phenylethyl carbamate residues in the end of each side chain (PPA-S and PPA-R) were synthesized by polymerization of the corresponding phenylacetylene monomers using Rh(nbd)BPh4 as a catalyst in DMF. The enantioseparation properties of the polymers were evaluated as coated-type chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC). Under the same chromatographic conditions, PPA-S and PPA-R showed different enantioseparation properties, indicating that the different interactions between the analytes and the polymers, which result from the different chiral phenylethyl carbamate groups in the end of each side chains. Racemates 1, 7, and 8 could be better resolved on PPA-S, while racemate 6 was separated on PPA-R more efficiently. In addition, the coated-type CSPs showed good solvent tolerability and could work without any damage by introducing the polar solvents, such as CHCl3 and THF, in eluent. Moreover, some racemates could be better resolved on these coated-type CSPs with the addition of THF to the eluent.

Does local chain conformation affect the chiral recognition ability of an amylose derivative? Comparison between linear and cyclic amylose tris(3,5-dimethylphenylcarbamate)

Coated-type chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC) were prepared from three cyclic amylose tris(3,5-dimethylphenylcarbamate) (cADMPC) samples, of which weight-average molar mass (Mw) ranges from 19 to 91 kg mol−1, and from three linear ADMPC samples ranging in Mw from 25 to 90 kg mol−1. CSPs made of cADMPC showed appreciably different chiral separation ability comparing with those for ADMPC with a mixed eluent of n-hexane and 2-propanol. Local conformation plays an important role for the chiral separation taking into account that the local helical structure of cADMPC in dilute solution is extended comparing with ADMPC. Immobilized-type CSPs were also prepared from enzymatically synthesized linear and cyclic amylose samples with 3-(triethoxysilyl)propylcarbamate linkers (ADMPCi and cADMPCi) of which Mw’s are in the range from 18 to 130 kg mol−1. When we choose quite high linker contents, CSPs of cADMPCi were fairly close to those of ADMPCi. This suggests that local conformations of ADMPCi and cADMPCi are similar in the stationary phase since they are crosslinked to the other polymer chains with multiple points on the polymer chain.

Liquid Chromatographic Enantiomeric Separation of Chiral Aliphatic Amines Using 2-Hydroxynaphthaldehyde as a Derivatizing Agent on Polysaccharide-Derived Chiral Stationary Phases

A new liquid chromatographic enantiomer separation of chiral amines as 2-hydroxynaphthaldimine derivatives on several coated and immobilized chiral stationary phases (CSPs) derived from polysaccharides is described. 2-Hydroxynaphthaldehyde was introduced as a derivatizing agent for the enantiomeric separation of chiral aliphatic amines under the normal phase conditions, and was found to both enhance detection sensitivity and provide suitable interaction sites for enantiodiscrimination. Cellulose-derived CSPs, in general, exhibited better enantiomeric separation than amylose-derived CSPs. Amongst the examined six covalently bonded and four coated-type CSPs, covalently bonded Chiralpak IC, which contains a cellulose-based chiral selector, showed the best enantioseparation. The method was applied to the determination of the enantiomeric purity of commercially available (R)- and (S)-leucinol. The enantiomeric impurities of the investigated analytes procured from two suppliers were found to be 0.06–1.20%. The developed analytical method was also validated in accordance with ICH guidelines and proved to be enantioselective, sensitive and effective for the enantiomeric separation of chiral aliphatic amines as 2-hydroxynaphthaldimine derivatives under ultraviolet detection.

Immobilization of helical poly(phenylacetylene)s having l-phenylalanine ethyl ester pendants onto silica gel as chiral stationary phases for HPLC

Novel one-handed helical copoly(phenylacetylene)s bearing a small amount of 3-(triethoxysilyl)propyl residues (CPAs 1–4) were synthesized, and efficiently chemically immobilized onto silica gel by the intermolecular polycondensation of the triethoxysilyl groups. Their chiral recognition abilities were evaluated as immobilized-type chiral stationary phases (CSPs) for high performance liquid chromatography (HPLC). These immobilized-type CSPs showed different chiral recognition abilities from the corresponding coated-type CSPs, which may be ascribed to the conformational change in the copoly(phenylacetylene)s during the immobilization process according to the diffuse reflectance circular dichroism (DRCD) measurement of the copolymer. In addition, the immobilized-type CSPs showed a universal solvent tolerability, for instance, CHCl3-containing eluents that cannot be used with the corresponding coated-type CSPs could now be used for the immobilized-type CSPs so that the chiral recognition of i-CSP-2 for the racemic 1-(9-anthyl)-2,2,2-trifluoroethanol (5) was improved with separation factors comparable or higher than those obtained on the popular polysaccharide-based CSPs. The intermolecular polycondensation of the triethoxysilyl groups of the copoly(phenylacetylene)s is a valuable immobilization method for poly(phenylacetylene)-based CSPs.

High-performance chiral stationary phases based on chitosan derivatives with a branched-chain alkyl urea

In this study, two series of chitosan 3,6-bis(arylcarbamate)-2-(isobutylurea)s and corresponding coated-type chiral stationary phases (CSPs) were prepared from two kinds of chitosans with different molecular weights. Most of the prepared CSPs demonstrated better enantioseparation performance than the homemade CSP of cellulose tris(3,5-dimethylphenylcarbamate). The CSPs of chitosan 3,6-bis(4-methylphenylcarbamate)-2-(isobutylurea) with higher molecular weight and chitosan 3,6-bis(3-chloro-4-methylphenylcarbamate)-2-(isobutylurea) with lower molecular weight possessed outstanding chiral recognition abilities which were at least as good as that of the commercialized CSP of Chiralcel OD–H towards the tested chiral analytes. Except for the two CSPs derived from chitosan 3,6-bis(4-methylphenylcarbamate)-2-(isobutylurea)s, the CSPs (the first class) with the chiral selectors of lower molecular weight provided better enantioseparations than the ones (the second class) with the chiral selectors of higher molecular weight. On the other hand, the chiral selectors of the first class CSPs showed higher swelling capacities in organic solvents than the ones of the second class. All prepared CSPs could be analyzed with a wider range of mobile phases, in which some “unusual organic solvents” such as ethyl acetate, chloroform and THF etc. could be used as additives. According to separation performance and tolerance against organic solvents, we concluded that the chitosan derivatives with branched-chain alkyl urea at 2-C of glucosamine residue were preferable to be used as chiral selectors for enantiomeric separation.

Homogeneous synthesis of partially substituted cellulose phenylcarbamates aiming at chiral recognition

AbstractHomogeneous carbanilation of cellulose with nine kinds of substituted phenyl isocyanates, in which the substituents were varied from electron‐donating to electron‐withdrawing groups, was carried out in 1‐allyl‐3‐methylimidazolium chloride (AmimCl) without any catalyst. The degree of substitution (DS) of cellulose phenylcarbamates in a range from 0 to 3 was readily controlled by altering reaction temperature, reaction time and molar ratio of phenyl isocyanate/anhydroglucose unit. Furthermore, the electronic effect of the substituents on the aromatic ring had a prominent impact on the reactivity of phenyl isocyanates. The phenyl isocyanates with stronger electron‐withdrawing substituents exhibited a higher reactivity. A plot of DS and Hammett substituent constants exhibited linearity with a positive slope. Subsequently, four kinds of partially substituted cellulose phenylcarbamates with DS of 2.0 were synthesized successfully in AmimCl, and then employed as coated‐type chiral stationary phases (CSPs) for high‐performance liquid chromatography. The enantioseparation results demonstrated that these CSPs exhibited high chiral recognition abilities for some racemates. The substituents on the phenyl moieties had a considerable effect on the chiral recognition ability of cellulose phenylcarbamate‐based CSPs. © 2015 Society of Chemical Industry

Comparative studies between covalently immobilized and coated chiral stationary phases based on polysaccharide derivatives for enantiomer separation of N‐protected α‐amino acids and their ester derivatives

Liquid chromatographic enantiomer separation of several N-benzyloxycarbonyl (CBZ) and N-tert-butoxycarbonyl (BOC) alpha-amino acids and their corresponding ethyl esters was performed on covalently immobilized chiral stationary phases (CSPs) (Chiralpak IA and Chiralpak IB) and coated-type CSPs (Chiralpak AD and Chiralcel OD) based on polysaccharide derivatives. The solvent versatility of the covalently immobilized CSPs in enantiomer separation of N-CBZ and BOC-alpha-amino acids and their ester derivatives was shown and the chromatographic parameters of their enantioselectivities and resolution factors were greatly influenced by the nature of the mobile phase. In general, standard mobile phases using 2-propanol and hexane on Chiralpak IA showed fairly good enantioselectivities for resolution of N-CBZ and BOC-alpha-amino acids and their esters. However, 50% MTBE/hexane (v/v) for resolution of N-CBZ-alpha-amino acids ethyl esters and 20% THF/hexane (v/v) for resolution of N-BOC-alpha-amino acids ethyl esters afforded the greatest enantioselectivities on Chiralpak IA. Also, liquid chromatographic comparisons of the enantiomer resolution of these analytes were made on amylose tris(3,5-dimethylphenylcarbamate)-derived CSPs (Chiralpak IA and Chiralpak AD) and cellulose tris(3,5-dimethylphenylcarbamate)-derived CSPs (Chiralpak IB and Chiralcel OD). Chiralpak AD and/or Chiralcel OD showed the highest enantioselectivities for resolution of N-CBZ-alpha-amino acids and esters, while Chiralpak AD or Chiralpak IA showed the highest resolution of N-BOC-alpha-amino acids and esters.

Comparison of several polysaccharide-derived chiral stationary phases for the enantiomer separation ofN-fluorenylmethoxy-carbonyl α-amino acids by hplc

The liquid chromatographic enantiomer separation of N-fluorenylmethoxycarbonyl (FMOC) protected alpha-amino acids was performed on nine polysaccharide-derived chiral stationary phases (CSPs). The cellulose derived coated CSPs, Chiralcel OD-H (separation factor = 1.09-2.70) and Chiralcel OD (separation factor = 1.08-2.55), had the best performance of all the CSPs for resolution of N-FMOC alpha-amino acids and therefore, all analyte enantiomers were base-line separated on Chiralcel OD-H and/or Chiralcel OD. Enantioseparation on cellulose tris(3,5-dimethylphenylcarbamate) derived CSPs (Chiralcel OD-H, Chiralcel OD and Chiralpak IB) is generally greater than that on amylose tris(3,5-dimethylphenylcarbamate) derived CSPs (Chiralpak AD-RH, Chiralpak AD and Chiralpak IA). Additionally, coated type CSPs (Chiralcel OD-H or Chiralcel OD, and Chiralpak AD) generally provided better enantioseparation for these analytes than the covalently bonded type CSPs (Chiralpak IB and Chiralpak IA) with the same chiral selector of cellulose tris(3,5-dimethylphenylcarbamate) and amylose tris(3,5-dimethylphenylcarbamate), respectively. However, Chiralpak IB and Chiralpak IA had an advantage over the coated type CSPs in that a broader range of solvents could be used due to its covalently bonded nature.

Covalently Bonded and Coated Chiral Stationary Phases Derived from Polysaccharide Derivatives for Enantiomer Separation of N‐Fluorenylmethoxycarbonyl α‐Amino Acids with Fluorescence Detection

Liquid chromatographic comparisons for enantiomer resolution of N‐fluorenylmethoxycarbonyl (FMOC) α‐amino acids with fluorescence detection were made on covalently bonded type chiral stationary phases (CSPs) (Chiralpak IA and Chiralpak IB) and coated type CSPs (Chiralpak AD and Chiralcel OD) derived from polysaccharide derivatives of the same chiral selectors. This is the first study reported of enantiomer resolution with fluorescence detection on covalently bonded type CSPs, Chiralpak IA and Chiralpak IB. In general, covalently bonded type CSPs (Chiralpak IA and Chiralpak IB) showed lower enantioseparation than coated type CSPs (Chiralpak AD and Chiralcel OD) for enantiomer resolution of these analytes, respectively. Owing to higher sensitivity and broader solvent compatibility in fluorescence detection on Chiralpak IA and Chiralpak IB than in UV detection, however, this analytical method is expected to enlarge their application of enantiomer resolution, such as an online HPLC monitoring of asymmetric synthesis.

Synthesis of chemically bonded cellulose trisphenylcarbamate chiral stationary phases for enantiomeric separation.

Cellulose trisphenylcarbamate is regioselectively bonded to 3-aminopropyl silica gel and underivatized silica gel, respectively, at the 6-position of the primary hydroxyl group on the glucose unit of cellulose with 4,4'-diphenylmethane diisocyanate (DPDI) as a spacer. Enantioseparations are evaluated on these prepared chiral stationary phases (CSPs) with several organic acids as the modifiers in the mobile phase by high-performance liquid chromatography. The influence of the amount of DPDI used on chiral resolution is investigated. Also, the corresponding coated-type phase is also prepared for the aim of comparison. It is observed that the bonded-type phase shows a lower chiral recognition power but a better column efficiency than the coated-type phase under the liquid chromatographic mobile phase with hexane-alcohol. However, the bonded-type CSPs are compatible with a wider number of solvents such as tetrahydrofuran (THF) or chloroform, which generally result in the solubility or swelling of the cellulose derivatives on the coated-type CSPs. The results obtained from this study indicate that the bonded-type CSP may provide complementary enantioselectivity over the coated-type phase by adopting THF as a component in the mobile phase.