Coarse Soil Research Articles

Synthesis of the influence of some parameters on dynamic shear resistance of coarse soil

Synthesis of the influence of some parameters on dynamic shear resistance of coarse soil

Sorting and Weathering Trends of Soil at Gale Crater, Mars: Implications for Regional Pedological Processes

AbstractDetailed soil characterization at Gale crater based on in situ observations has revealed compositional trends within soils, while the physical and chemical processes underlying the compositional trends remain to be evaluated. Here we use the grain‐morphometrical and geochemical trends across the Wentworth‐classes of 48 in situ soil targets at Gale crater to evaluate underlying pedological processes and potential chemical weathering signatures. The concentration of olivine minerals within the ∼250 to ∼500 μm size range indicates the prevalence of heavy mineral sorting in a granulometric sense in Gale soils that surpasses the possible effect of the cratering‐induced mixing processes. The extent of olivine sorting in soils varies spatially and is influenced by the targets' aeolian setting. The finest portion of Gale soils (<125 μm) is likely a mixture of allochthonous sediment, globally sourced from atmospheric suspension, and autochthonous counterparts from the weathering of local rocks, while the coarser soils (>125 μm) are mostly sourced from local rocks, with possible inputs from both the unaltered parent rock of the Stimson formation and the bedrocks that have undergone diagenetic alteration. If applicable globally, this would reinforce prior inferences that even dust‐mantled regions are geochemically heterogeneous owing to a substantial fraction of soils derived from underlying lithology. The low chemical weathering intensity and coupling of mobile elements in soils suggest localized, low pH and low water‐to‐rock ratio aqueous weathering conditions under predominantly cold and arid climates, which may occur either during post‐pedogenetic alteration in soils or during the acidic alteration of source rocks.

Field‐based estimation of cation exchange capacity using induced polarization methods

AbstractThis study investigates the potential of field‐based induced polarization (IP) methods to provide in‐situ estimates of soil cation exchange capacity (CEC). CEC influences the fate of nutrients and pollutants in the subsurface. However, estimates of CEC require sampling and laboratory analysis, which can be costly, especially at large scales. Induced polarization (IP) methods offer an alternative approach for CEC estimation. The sensitivity of IP measurements to the surface properties of geological materials ought to make them more appropriate than DC resistivity and electromagnetic induction methods, that are sensitive to bulk electrical properties . Such abilities of IP are well demonstrated in the laboratory; however, applications are lacking at field scales. In this work, the ability of field‐based IP to characterize the CEC of floodplain soils is assessed by implementing a methodology that allows for direct comparison between IP and soil parameters. In one field, soil polarization and CEC exhibited the expected positive correlation; but multi‐frequency measurements showed no clear advantage over single‐frequency measurements. In another field, coarser soils (with low CEC) exhibited a high polarization. These coarser soils were characterized by anomalous magnetic susceptibility values, and hence the polarization was attributed to the presence of magnetic minerals. Although better than order‐of‐magnitude estimates of CEC were possible in soils without substantial magnetic minerals, better characterization of porosity, saturation, cementation and saturation exponents, and pore fluid conductivity would improve predictions. However, the measurement of these parameters would require similar efforts as direct CEC measurements. This study contributes to bridging the gap between laboratory‐derived relationships and their applicability in field applications. Overall, this work provides valuable insight for future studies seeking to understand polarization mechanisms in soils at the field scale.

Growth trends of loblolly pine age five or less in relation to soil type and management intensity

We evaluated three objectives for loblolly pine (Pinus taeda L.) trees age five or less: 1) how height growth varies by soil type and silvicultural intensity, 2) the accuracy of predicted base-age 25 site index (SI25) using age one to five heights, and 3) if height dominance exhibited early in the rotation is maintained throughout the rotation. Data from 42 sites across the southeastern United States with an array of soil textures and management intensities (optimal, intensive, and operational) were used. Management intensity and soils significantly affected tree height. Coarse loamy soils were the most responsive to increasing management intensity. At age four, tree heights were greatest in the optimal group (4.63 m), followed by the intensive (4.31 m), and then the operational (3.06 m). Organic soils do not appear to respond to maximum management intensity. Predictability of SI25 was high especially starting at age four, with R2 values ranging from 0.27 for the age four intensive group to 0.78 for the age four operational group. The optimal group had the greatest slope with an expected increase of 2.61, 2.75, 1.88, and 1.78 m in site index per additional meter of height at ages two, three, four, or five, respectively. Data from six different study sites indicate, the tallest (class one) and smallest (class five) trees changed percentile class the least often over time. As early as age two, over 40 % of observations in classes one and five had zero changes in class through age 13. Young tree data were effective in predicting SI25, and height dominance appeared generally set early in the rotation.

Synergy Between Woody Peat and Bentonite Alters Stability of Soil Organic Carbon in Coarse Soil by Enhancing Capacity for Soil Aggregation and Hydro‐Physical Properties

ABSTRACTCoarse soil has a poor structure and is susceptible to wind and water erosion, thereby making it difficult to maintain the soil organic carbon (SOC) content. Woody peat (WP) is an organic material that can increase the SOC content of the soil, while clay materials can rapidly enhance the capacity for soil aggregate formation. In order to explore the synergistic effects of WP and clay materials (bentonite and red clay) on the aggregate structure and hydro‐physical properties of coarse soil, as well as the mechanism associated with SOC mineralization (ΔSOC), we conducted an incubation study using lou soil (L0) and loessial soil (H0) with three treatments: addition of WP alone (LW, HW), mixture of WP and bentonite (LWB, HWB), and mixture of WP and red clay (LWR, HWR). The three treatments enhanced the proportion of macroaggregate (> 2 mm) and aggregate stability of the two soils, and optimized the water retention and ventilation performance. The highest aggregate stability of LWB and HWB can be attributed to the positive synergistic effect of WP and bentonite, and bentonite was more effective than red clay due to its crystal structure. The results also showed that the ΔSOC values were significantly lower under LWB and HWB than those under WP addition alone and adding the mixture of WP and red clay (p < 0.05). Moreover, partial least squares path modeling analysis showed that the hydro‐physical properties of the two improved soils inhibited SOC mineralization (p > 0.05), whereas particulate organic carbon (POC) content significantly accelerated SOC mineralization (p < 0.01). The synergistic effect of clay materials increased mineral‐associated organic carbon (MAOC), which was beneficial to maintain the long‐term effectiveness of WP. Overall, our results demonstrated that the synergistic use of WP and bentonite enhanced the aggregate stability and hydro‐physical properties of coarse soil and improved SOC storage capacity. These results provide scientific and theoretical guidance to facilitate the rapid improvement of coarse soil through engineering measures in arid and semi‐arid areas with water and fertilizer limitations.

Microplastic Transport and Accumulation in Rural Waterbodies: Insights from a Small Catchment in East China.

Microplastic (MP) pollution in agricultural ecosystems is an emerging environmental concern, with limited knowledge of its transport and accumulation in rural waterbodies. This study investigates the distribution and sources of MP in drainage ditches influenced by pond connectivity, land use, and soil properties within a small catchment in Nanjing, East China. Sediment was collected from ditches in 18 sites across forest, agricultural, horticultural, and urban areas. Using laser-directed infrared spectroscopy (LDIR), 922 MP particles were identified. Six materials were dominant: fluororubber (FR), polyethylene terephthalate (PET), polyurethane (PU), acrylonitrile (ACR), chlorinated polyethylene (CPE), and polyethylene (PE). MP concentrations varied by land use and pond connectivity, with ditches above ponds exhibiting higher counts (1700 particles/kg) than those below (1050 particles/kg), indicating that ponds act as MP sinks. The analysis revealed site-specific MP sources, with FR linked to road runoff and PET associated with agricultural practices. Correlations between MP shape and soil properties showed that more compact and filled shapes were more commonly associated with coarser soils. PE particle size was negatively correlated with organic matter. This study highlights the need for targeted strategies to reduce MP pollution in rural landscapes, such as reducing plastic use, ditch maintenance, and improved road runoff management.

Recovery and Restructuring of Fine and Coarse Soil Fractions as Earthen Construction Materials

Excessive consumption of natural resources to meet the growing demands of building and infrastructure projects has put enormous stress on these resources. On the other hand, a significant quantity of soil is excavated for development activities across the globe and is usually treated as waste material. This study explores the potential of excavated soils in the Brittany region of France for its reuse as earthen construction materials. Characterization of soil recovered from building sites was carried out to classify the soils and observe their suitability for earthen construction materials. These characteristics include mainly Atterberg limits, granulometry, organic matter and optimum moisture content. Soil samples were separated into fine and coarse particles through wet sieving. The percentage of fines (particles smaller than 0.063 mm) in studied soil samples range from 28% to 65%. The methylene blue value (MBV) for Lorient, Bruz and Polama soils is 1, 1.2 and 1.2 g/100 g, and French classification (Guide de terrassements des remblais et des couches de forme; GTR) of soil samples is A1, B5 and A1, respectively. The washing of soils with lower fine content helps to recover excellent-quality sand and gravel, which are a useful and precious resource. However, residual fine particles are a waste material. In this study, three soil formulations were used for manufacturing earth blocks. These formulations include raw soil, fines and restructured soil. In restructured soil, a fine fraction of soil smaller than 0.063 mm was mixed with 15% recycled sand. Restructuring of soil fine particles helps to improve soil matrix composition and suitability for earth bricks. Compressed-earth blocks of 4 × 4 × 16 cm were manufactured at a laboratory scale for flexural strength testing by using optimum molding moisture content and compaction through Proctor normal energy. Compressive strength tests were performed on cubic blocks of size 4 × 4 × 4 cm. Mechanical testing of bricks showed that bricks with raw soil had higher resistance with a maximum of 3.4 MPa for Lorient soil. Removal of coarse particles from soil decreased the strength of bricks considerably. Restructuring of fines with recycled sand improves their granular skeleton and increases the compressive strength and durability of bricks.

An investigation of the behaviour of polymer fluids in the American Petroleum Institute filter press

The American Petroleum Institute (API) filter press test has been used for decades in the construction industry as part of the quality control regime for bentonite-based excavation support fluids. The industry has carried over the use of this test to polymer fluids despite the lack of published evidence of its suitability for these fluids and the very different mechanisms by which polymer fluids and bentonite slurries achieve excavation support. This paper presents the first systematic investigation of this issue through a combination of laboratory testing and theoretical analysis. The investigation demonstrates the very different behaviours of bentonite slurries and polymer fluids. In contrast to the results for bentonite slurries, API filter press results for polymers are shown to be highly sensitive to the filter paper used. In particular, repeatability testing revealed a substantial variation in the polymer fluid loss rates attributable to three primary factors: (a) the filter paper pore size; (b) filter paper damage resulting from the applied test pressure; (c) apparent ‘clogging’ of the filter paper pore space. Furthermore, the study demonstrates the poor repeatability of the API filter press test for polymer fluids even when filter papers of the same type are used. Interestingly, analysis of polymer flow with respect to filter paper pore size and the applied pressure showed that the filter papers were behaving as porous media rather than a simple bundle of capillaries; their behaviour could not be modelled using a simple capillary bundle model. Importantly, this finding shows that the filter press may provide a rapid method of assessing the apparent viscosity of polymer fluids in porous media at high shear rates – data that cannot be obtained by rotational viscometry, and would otherwise require resort to permeameter testing of coarse soils. The investigation demonstrates that the filter press test is not useful for the on-site quality control of polymer fluids but, given the theory presented in the paper, it can be a useful laboratory tool that provides valuable insight into polymer fluid flow behaviour in soils of high hydraulic conductivity, the most challenging soils for polymer fluid support.

Pore Structures in Detritusphere of Soils Under Switchgrass and Restored Prairie Vegetation Community

ABSTRACTRoot detritusphere, that is, the soil in the vicinity of decomposing root residues, plays an important role in soil microbial activity and C sequestration. Pore structure (size distributions and connectivity of soil pores) in the detritusphere serves as a major driver for these processes and, in turn, is influenced by the physical characteristics of both soil and roots. This study compared pore structure characteristics in the root detritusphere of soils of contrasting texture and mineralogy subjected to > 6 years of contrasting vegetation: monoculture switchgrass and polyculture prairie systems. Soil samples were collected from five experimental sites in the US Midwest representing three soil types. Soil texture and mineralogy were measured using a hydrometer and x‐ray powder diffraction, respectively. The intact cores were scanned with x‐ray computed micro‐tomography to identify visible soil pores, biopores, and particulate organic matter (POM). We specifically focused on pore structure within the detritusphere around the POM of root origin. Results showed that the detritusphere of coarser textured soils, characterized by high sand and quartz contents, had lower porosity in the vicinity of POM compared with finer textured soils. POM vicinities in finer textured soils had high proportions of large (> 300 μm diameter) pores, and their pores were better connected than in the coarser soils. Lower porosity in the outer (> 1 mm) parts of the detritusphere of switchgrass than of prairie suggested soil compaction by roots, with the effect especially pronounced in the coarser soils. The results demonstrated that soil texture and mineralogy played a major, while vegetation played a more modest, role in defining the pore structure in the root detritusphere.

Experiments on suffusion of coarse soils from an ageing British dam

This study presents a laboratory investigation on the susceptibility of suffusion in soil samples collected from a very old earth dam. The dam, rebuilt around 1800, is composed of two earth fills and lacks a clay core or filtration components, making it vulnerable to internal erosion. Following an inspection in 2006, concerns were raised about the dam’s vulnerability to internal erosion during strong floods. Boreholes and vibro-cores were performed to collect samples, which were then tested for suffusion susceptibility. The study found that four out of six samples were highly susceptible to suffusion erosion, with the erosion process starting at gradients much lower than unity. The opposite was observed for samples with fines content greater than 30% and showing some plasticity. The results were compared to predictions from seven geometric criteria found in the literature, but none of the methods could forecast the behaviour of all tests. The study highlights the need for laboratory tests when there is no agreement between the predictions from available criteria. The findings of this study were used to inform the rehabilitation of the dam, which included installing sand filters designed to capture the smallest particles and relief wells distributed along the entire length and height of the eastern embankment. The study demonstrates the importance of assessing suffusion susceptibility in embankment dam safety control and the need for laboratory tests to validate predictions from geometric criteria.

Change in Land Use Affects Soil Organic Carbon Dynamics and Distribution in Tropical Systems

Anthropogenic land cover change is directly responsible for the deforestation and degradation of tropical forests. In this context, assessing soil organic carbon (SOC) stocks is key to understanding the impact of anthropogenic activities on SOC so that we can implement management practices that effectively reduce emissions or promote carbon sequestration. Our objective was to assess the effect of land-use change on the dynamics and distribution of SOC in three systems (agriculture, pasture and agroforestry) after 40 years of deforestation in a tropical dry forest in the central–eastern region of Honduras. For this purpose, the bulk density, percentage of coarse fragments (>2 mm) and soil organic carbon content were determined at three depths (0.00–0.10 m, 0.10–0.20 m and 0.20–0.30 m). The results showed an increase in bulk density for all new uses, although soil compaction had not yet occurred. In terms of total soil organic carbon (TOC) stocks, deforestation caused a decrease from 17% to 48% in agricultural and agroforestry soils, respectively; on the other hand, grasslands did not show significant differences compared to tropical dry forest, suggesting that they have a high potential as carbon sinks in deforested tropical areas. However, this did not imply a better state of the system, as the greatest increases in bulk density were found in pastures.

Long-term biochar and soil organic carbon stability – Evidence from field experiments in Germany

Organic soil amendments (OSA) with long residence times, such as biochar, have a high potential for soil organic carbon (SOC) sequestration. The highly aromatic structure of biochar reduces microbial decomposition and explains the slow turnover of biochar, indicating long persistence in soils and thus potential SOC sequestration. However, there is a lack of data on biochar-induced SOC sequestration in the long-term and under field conditions. We sampled two long-term field experiments in Germany, where biochar was applied 12 and 14 years ago. Both locations differ in soil characteristics and in the types and amounts of biochar and other OSA. Amendments containing compost and 31.5 Mg ha−1 of biochar on a loamy soil led to a SOC stock increase of 38 Mg ha−1 after OSA addition. The additional increase is due to non-biochar co-amendments such as compost or biogas digestate. After eleven years, this SOC stock increase was still stable. High biochar amount additions of 40 Mg ha−1 combined with biogas digestate, compost or synthetic fertilizer on a sandy soil led to an increase of SOC stocks of 61 Mg ha−1; 38 Mg ha−1 dissipated in the following four years most likely due to lacking physical protection of the coarse soil material, and after nine years the biochar-amended soils showed only slightly higher SOC stocks (+7 Mg ha−1) than the control. Black carbon stocks on the same soil increased in the short- and mid-term and decreased almost to the original stock levels after nine years. Our results indicate that in most cases the long-term effect on SOC and black carbon stocks is controlled by biochar quality and amount, while non-biochar co-amendments can be neglected. This study proves that SOC sequestration through the use of biochar is possible, especially in loamy soils, while non-biochar OSA cannot sequester SOC in the long term.

Mechanical properties of teguline clay pellet mixtures during continuous oedometric compression

Clay pellet mixtures are generally compressed to improve their engineering performance. Deepening the comprehension of the mechanical properties of these mixtures in the complete compression process facilitates the benefit to the engineering design and their utilization. In this study, the effects of soil grain size distribution, water content and dry density on the mechanical properties and microstructure of Teguline clay pellet mixtures during a continuous oedometric compression process are explored. Three types of soil pellet mixtures, including mixture A (grain size ≤5 mm), mixture B (≤ 0.4 mm) and mixture C (2–5 mm), were prepared with different water contents of 7%, 8% and 12% respectively. Subsequently, continuous oedometeric compression was undertaken to explore their mechanical behaviours of the soil pellet mixtures. After that, the microstropic structures of the compacted pellet mixtures were investigated using mercury intrusion porosimetry (MIP). The results indicated that mixture A has a minimal initial packing density of pellet mixtures, while mixture C has a maximum one at the initial compression stage. After completion of compression, the compression curves of the pellet mixtures tended to converge uniformity at a semilogarithm coordinate as the vertical stress increased. All of the compression curves presented a concave shape at the plastic compression stage, which is significantly influenced by grain size distribution and water content. In contrast, the elastic compression and rebound behaviours are little affected by the grain size distribution and water content. As far as the microstructure is concerned, compacted samples prepared by mixture A or C presented a unimodal pore structure, while those by mixture B showcased a bimodal pore structure. In comparison with the unimodal pore distribution of the undisturbed stiff clay, the compacted samples displayed a pseudo-unimodal pore distribution because the inter-aggregate pores still existed. A double tangent method was proposed to determine the delimiting pore diameter of the pseudo-unimodal pore distribution curves and found that the delimiting pore diameter decreased with the increase of dry density and water content. Moreover, the inflexion point for the pore diameter of compacted samples prepared by coarse soil was larger than that of fine soil. Combining this work with previous research, it was found that the high compression of coarse soil easily causes the pseudo-unimodal shape, which is also impacted by water content and particle properties. This work could help deepen the understanding of the mechanical characteristics and microstructure of the stiff clay pellet mixtures during continuous oedometric compression.

Vegetation restoration in the coarse‐textured soil area is more conducive to the accumulation of Fe‐associated C

Abstract Vegetation restoration has an important effect on soil carbon (C) pool dynamics. Highly stable iron (Fe)‐associated C is an important component of the soil C pool and it plays a crucial role in the soil C cycle. However, a knowledge gap remains regarding the existence of Fe‐associated C variation during vegetation restoration. Herein, 0–60 cm soil samples of cropland, grassland, shrubland and forestland from three soil types (loam, loess and sandy soils) were collected to explore the response of Fe‐associated C to vegetation restoration. The results showed that soil Fe‐associated C proportion in the study area ranged from 2.2% to 26.3%. Surface soil (0–20 cm) Fe‐associated C content in loess and sandy soils increased following vegetation restoration, but decreased in loam soil. The accumulation efficiency of soil Fe‐associated C during vegetation restoration was higher in coarser soils. Moreover, the Fe‐associated C content and proportion of forestland with a higher soil organic matter (SOM) pool were the highest among the land use types. Vegetation restoration affects soil Fe‐associated C in two different ways: (1) increasing the SOM and dissolved organic C and improving the efficiency of C and Fe binding to promote the accumulation of Fe‐associated C; (2) decreasing the total soil Fe content, reducing the trivalent iron (Fe(III)) to bivalent iron (Fe(II)) and breaking the binding of C and Fe to decrease soil Fe‐associated C content, and these two different ways were found in all three soil types. Additionally, higher SOM accumulation efficiency and less root destruction caused by vegetation restoration in coarse soils resulted in a higher Fe‐associated C accumulation efficiency. Synthesis and applications. Vegetation and soil type strongly regulated the effects of vegetation restoration on soil Fe‐associated C. Forestlands may be the optimum vegetation type to provide soil C sequestration benefits, effectively increasing soil C pool and maximising Fe‐associated C content. This study has addressed the knowledge gap regarding the effects of vegetation restoration on soil Fe‐associated C and provides scientific basis for a better understanding of the soil C cycle and developing scientific vegetation restoration measures.

Random forest approach to estimate soil thermal diffusivity: Evaluation and comparison with traditional pedotransfer functions

Pedotransfer functions (PTFs) are widely used in science and engineering to calculate soil thermal diffusivity (κ) as a function of soil moisture content and other soil physical properties. However, available data on κ are rather scarce and already developed PTFs suffer from significant uncertainties in applicability and performance. Few studies attempted to systematically review and evaluate these PTFs with large dataset of κ. The objectives of this study were to (1) review and collate currently available PTFs for κ; (2) compile a κ dataset to evaluate performance of these PTFs, (3) build a machine learning (ML) (i.e., random forest-RF) model with three classes of soil physical properties to determine soil physical properties most appropriate to use as predictors for calculating κ, and (4) compare the RF modelling with the traditional PTFs. The correlation coefficient (r), centered root-mean-square (E'), and standard deviation (SD) were used to evaluate the performance of the above PTFs. A total of nine PTFs were synthesized and assessed with a compiled dataset consisting of 998 measurements from 106 soils with a wide range of textures. In general, the PTFs of Lukiashchenko and Arkhangelskaya (2018) (LA2018–1 and LA2018–2) perform the best. While the quadratic equation of Mady and Shein (2018) (MS2018–1 and MS2018–2) showed better performance for coarse and medium textured soil. However, the overall performance of the nine PTFs for predicting κ was not as accurate as RF. RF can satisfactorily calculate κ taking into account sand, silt, clay contents, and soil moisture content as predictors.

Biochar effects on salt-affected soil properties and plant productivity: A global meta-analysis

Biochar has been recognized as a promising practice for ameliorating degraded soils, yet the consensus on its effects remains largely unknown due to the variability among biochar, soil and plant. This study therefore presents a meta-analysis synthesizing 92 publications containing 987 paired data to scrutinize biochar effects on salt-affected soil properties and plant productivity. Additionally, a random meta-forest approach was employed to identify the key factors of biochar on salt-affected soil and plant productivity. Results showed that biochar led to significant reductions in electrical conductivity (EC), bulk density (BD) and pH by 7.4%, 4.7% and 1.2% compared to the unamended soil, respectively. Soil organic carbon (by 55.1%) and total nitrogen (by 31.3%) increased significantly with biochar addition. Moreover, biochar overall enhanced plant productivity by 31.5%, and more pronounced increases in forage/medicinal with higher salt tolerance than others. The results also identified that the soil salinity and biochar application rate were the most important co-regulators for EC and PP changes. The structural equation model further showed that soil salinity (P < 0.001), biochar pH (P < 0.001) and biochar specific surface area (P < 0.01) had a significant negative effect on soil EC, but it was positively impacted by biochar pyrolysis temperature (P < 0.05). Furthermore, plant productivity was positively affected by biochar pH (P < 0.001) and biochar feedstock (P < 0.01), while negatively influenced by biochar pyrolysis temperature (P < 0.01). This study highlights that woody biochar with 7.6 < pH < 9.0 and pyrolyzed at 400–600 °C under 30–70 t ha−1 application rate in moderately saline coarse soils is a recommendable pattern to enhance forage/medicinal productivity while reducing soil salinity. In conclusion, biochar offers promising avenues for ameliorating degradable soils, but it is imperative to explore largescale applications and field performance across different biochar, soil, and plant types.

Effect of Median Soil–Particle Size Ratio on Water Storage Capacity of Capillary Barrier

Capillary barriers are widely used as a cover system to enhance the upper-soil-layer water storage capacity and reduce water infiltrate into the lower soil layer. In this paper, the effects of the median soil–particle size ratio on the water storage capacity of capillary barriers were studied using a series of indoor one-dimensional soil column infiltration tests. The results show that the water storage capacity rises with an increase in the median soil–particle size ratio until it exceeds 10. The variation in the total water storage capacity is related to not only the median soil–particle size ratio but also the particle size of coarse-grained soil or fine-grained soil. When the fine-grained soil-layer particle size is constant, the total water storage first increases, then decreases, and finally remains constant after increasing the median soil–particle size ratio. In contrast, when the coarse-grained soil layer particle size is constant, the relationship between the capillary barrier’s total water storage and median soil–particle size ratio can be defined as a power function. Using the capillary barrier can increase coarse-grained sand by 90% in water storage capacity and can only increase fine-grained sand by 7% in water storage capacity. The breakthrough time increases with the increase in the median soil–particle size ratio. The presence of the coarse and fine-grained soil layer interface in the capillary barrier can affect the fine-grained soil layer infiltration rate.

Tillage and mulching effects on carbon stabilization in physical and chemical pools of soil organic matter in a coarse textured soil

Characterization of soil organic carbon (SOC) in terms of size, storage inside aggregates and chemical recalcitrance is vital to understand mechanisms of its stabilization and to devise climate smart agricultural management practices. Tillage and residue retention are known to influence carbon (C) storage within soil aggregates and its accumulation as particulate organic matter as well as organomineral complexes. However, the effect of tillage and crop residue retention on C stabilization in coarse textured soils through various mechanisms is not well understood. We studied the effect of conservation agriculture involving no tillage with surface residue mulch (NTM) in maize-wheat sequence on particulate (POC) and mineral associated organic C (MinOC), C storage within aggregates and acid non-hydrolysable C (NHC) in a sandy loam soil. Compared to conventional tillage without residue retention (CTM0), the NTM improved SOC stocks by 23% in top 15-cm soil and significantly increased coarse POC (∼92 to 284%) and fine POC (67 to 123%) with relatively little effect on MinOC. This indicated that MinOC had relatively small contribution towards SOC stabilization in coarse textured sandy loam soils with limited potential to form organomineral complexes. The results further showed that the effects of NTM were brought about by improved aggregate stability and C preservation inside macroaggregates of size >1 mm. Furthermore, greater amount of SOC (2.64 g C kg−1) and macroaggregate associated C (0.35–0.59 g C kg−1) occurred in recalcitrant forms (NHC) under NTM compared to conventional (CT) and deep tillage (DT). The NTM also impacted the belowground C input through improved root length density (RLD) and development of fibrous roots expressed as specific root length (SRL), which influenced SOC build-up and stabilization. It is concluded that compared to the existing practice of CTM0, the conservation agriculture involving NT with residue retention leads to SOC sequestration in coarse textured soils. Its large scale adoption, besides helping in climate change mitigation will lead to soil health improvement.

An integrated modeling approach to simulate human-crop-groundwater interactions in intensively irrigated regions

Global food security is threatened by aquifer depletion in arid and semi-arid regions. Ensuring aquifer sustainability while minimizing farmers' costs requires effective groundwater management policies, which are informed by hydro-economic models. However, the reliability of these models is typically compromised by oversimplifications. This study introduces a hydro-economic modeling framework (ABM-MODFLOW), applied in the U.S. High Plains, overcoming previous models’ shortcomings. It employs an interdisciplinary approach, simulating real-world farming decisions and the resultant impacts on groundwater systems. Model validation indicates satisfactory performance in reproducing historical data and trends, outperforming the standalone groundwater model. Results show that agents with high irrigation capacities and fine soils earn the highest profits, whereas those with low irrigation capacities and coarse soils achieve the lowest profits. This modeling framework provides an advanced approach for simulating interactions between human decisions, crops, and groundwater in heavily stressed aquifers globally, supporting the development of effective groundwater management policies.

Correlation Between Coarse Wood Debris and Soil Different Chemical Properties of Three Forest Types in Northeast China

Correlation Between Coarse Wood Debris and Soil Different Chemical Properties of Three Forest Types in Northeast China