Abstract The Kansai Electric Power Co., Inc. (KEPCO) has developed energy efficient chemical absorbents and economical processes which aim to reduce the cost of CO 2 capture, in collaboration with Mitsubishi Heavy Industries, Ltd. (MHI). Together the companies have been developing and critically testing high efficiency, economical absorbents according to the latest absorbent development procedures and process simulation for CO 2 capture processes. This work has been ongoing since 1991, using several Japan based R&D facilities and a pilot plant, used to verify improvements, located at Nanko Power Station in Osaka, Japan. Following significant testing of a range of absorbents in the mid 1990s, KS-1 TM , KS-2 and KS-3 were developed. Based on subsequent rigorous evaluation of the three solvents, KS-1 TM was selected for commercialization because of its overall technical and economical merits. During long-term pilot plant testing, the improved absorbents demonstrated superior performance in relation to the regeneration energy requirements leading to the following results: 2.94 MJlkg- CO 2 in combination with KS-1 TM ” and the Kansai Mitsubishi Carbon Dioxide Recovery (KM-CDR Process TM ) commercial process. In addition, practical, commercially applicable improved absorbent properties such as low corrosiveness and low solvent consumption were also confirmed. KEPCO and MHI continue development work in this area and the current status is summarized as follows: The highly successful R&D phase has led to the commercial deployment of CO 2 capture technology and seven (7) commercial CO 2 capture plants are currently under operation, with a maximum CO 2 capture capacity of 450 metric tons per day (tpd). These commercial plants are deployed in the chemical and fertilizer industry, where the operational performance is assisting in the improved development of R&D concepts. Two (2) further commercial plants are under construction, with commissioning expected in Q3 2010. For further cost reductions in relation to CO 2 capture, recent work has focused on developing new energy efficient chemical absorbents and processes. Following modifications to the Nanko CO 2 capture pilot plant a new “Energy Saving Process”, was developed, which leads to a greater than 10% steam consumption reduction over the MHI conventional process using KS-1 TM absorbent. Additionally the same reduced steam consumption was recorded for tests using the KS-1 TM absorbent. A thermal energy requirement of less than 2.5 MJ/kg- CO 2 in combination with KS-1 TM and the “New Energy Efficient Process” has been confirmed under the optimum operation condition of the CO 2 capture process. In addition to select new absorbents which feature the best profile and fit to the actual operating condition, KEPCO and MHI have intensively evaluated vapor-liquid equilibrium (VLE) and reaction kinetics for a range of newly developed absorbents and their performance is presented in this paper. The above data was obtained using the Nanko CO 2 capture pilot plant which operates under a natural gas fired boiler condition and we expect that the thermal energy requirement of coal fired boiler flue gas (with greater CO 2 concentration condition) will be further reduced. KEPCO and MHI are continuing pilot tests for the “Energy Saving Process”, leading to the application of this new process in commercial CO 2 capture plant design. This paper introduces and presents the current status of the KEPCO & MHI CO 2 capture technology and concepts for future energy reduction improvements. The paper will also include test results in relation to newly developed absorbents, and the “New Energy Efficient Process”, which have enhanced the performance and reduced the associated energy penalty of the CO 2 capture process. KEPCO and MHI are continuing the development of efficient absorbents and optimized processes, thus helping to facilitate the future wide scale deployment of CO 2 capture technology as an effective counter measure against global warming.