Coalbed Methane Extraction Research Articles

A transient source-function-based embedded discrete fracture model for simulation of multiscale-fractured reservoir: Application in coalbed methane extraction

A transient source-function-based embedded discrete fracture model for simulation of multiscale-fractured reservoir: Application in coalbed methane extraction

Analysis of dominant flow in tectonic coal during coalbed methane transport

Diffusion and seepage are the main flow forms of coal seam gas transport, and are one of the key factors in the selection of gas extraction improvement methods. Changes in the physical structure of tectonic coal make gas transport more complex during coalbed methane extraction. In this paper, we develop a multi-field coupled model of methane transport in coal seams, taking into account the effects of tectonics, and theoretically analyze the dominant flow patterns for methane extraction. Then, the evolution of gas dominated flow is analyzed for different initial pressures, initial permeabilities, and initial diffusion coefficients of tectonic and intact coal seams. The results show that the amount of daily methane seepage in tectonic coal increases with the initial pressure of the coal reservoir, but decreases with the initial diffusion coefficient of the coal reservoir. Methane seepage in tectonic coal has a longer control time than in intact coal at different initial pressures, initial permeabilities, and initial diffusion coefficients of the coal reservoir. For different coal reservoir initial pressures, coal reservoir initial permeabilities, and coal reservoir initial diffusion coefficients, the maximum seepage control time for tectonic coal is 20, 17, and 15 times longer than for intact coal, respectively. Finally, the discrepancies of methane dominant flow in tectonic coal and intact coal during methane extraction were analyzed by using the double bottleneck flow model, and methods for methane enhanced extraction in tectonic coal and intact coal were discussed. The results presented in this paper may provide a theoretical reference for the extraction of differentiated gas in coal seams.

Study on the Spontaneous Combustion Law of Coal Body around a Borehole Induced by Pre-extraction of Coalbed Methane.

To address the challenges associated with the high gas content, high pressure, and low permeability coefficient in deep coal seams, strategies such as infilling boreholes and increasing the negative pressure of extraction are commonly implemented to alleviate issues related to coalbed methane extraction. However, long-term mining pressure can lead to the development of cracks in the coal seam near the borehole, thereby creating air leakage channels, which could potentially impact the oxygen supply during the extraction process. This leads to secondary disasters such as the spontaneous combustion of coal and gas explosions, considerably impacting the life and health of underground workers. To solve this issue, a thermal-fluid-solid coupling model for the working surface was constructed based on numerical simulation software, taking into account the multimechanism coupling effect of coal seam gas. The laws of coal oxidation and spontaneous combustion induced by coalbed methane extraction around boreholes were studied. The variation laws of the oxygen concentration, coal temperature, and oxidation heating zone around the borehole under different extraction conditions were simulated and analyzed. The findings demonstrate that the negative extraction pressure enables the gas to penetrate the fracture zone of the borehole, leading to an increase in the oxygen consumption rate and coal temperature around the borehole with an increase in negative extraction pressure. The coal gas leakage surrounding the borehole reduces as the sealing depth increases, and both the heating rate of coal and oxygen volume fraction show a downward trend. The fitting relationship between the negative pressure of drainage, depth of sealing, and temperature change in the coal body surrounding the boreholes was identified. It was determined that the negative pressure of 13 kPa for borehole drainage and a sealing depth >18 m are the optimal extraction parameters. The range of the oxidation zone and the position of the boundary line under this parameter were predicted, and the position function of the dangerous area of oxidation heating was defined. The research results have remarkable implications for the coordinated prevention and control of gas and coal spontaneous combustion in coalbed methane predrainage boreholes, as well as for efficient prevention and control of CO in on-site gas extraction boreholes, thus ensuring efficient and safe gas extraction.

Theories, Techniques and Materials for Sealing Coalbed Methane Extraction Boreholes in Underground Mines: A Review

To further enhance the intelligent technology, platformisation, and systematisation of coalbed methane extraction sealing technology, this paper analyses the research progress of theories, technologies, and sealing materials related to coalbed methane extraction sealing and systematically summarises the latest achievements of the basic theories, key technologies, and sealing materials of coalbed methane extraction. Considering the increasing mining depth, advancements in intelligent technology, and the evolving landscape of coalbed methane development, it is particularly important to establish a more comprehensive coalbed methane extraction borehole sealing system. Based on this, future development trends and research prospects are proposed: In terms of coalbed-methane-extraction-related theories, there should be a stronger focus on fundamental research such as on gas flow within the coal matrix. For coalbed methane extraction borehole sealing technologies and devices, efforts should be made to enhance research on intelligent, platform-based, and systematic approaches, while adapting to the application of directional long borehole sealing processes. In terms of coalbed methane extraction borehole leakage detection, non-contact measurement and non-destructive monitoring methods should be employed to achieve dynamic monitoring and early warning of methane leaks, integrating these technologies into coalbed methane extraction system platforms. For coalbed methane extraction borehole sealing materials, further development is needed for liquid sealing materials that address borehole creep and the development of fractures in surrounding rock, as well as solid sealing materials with Poisson’s ratios similar to that of the surrounding rock mass.

Innovative Microwave System for Safe and Efficient Coalbed Methane Extraction: Design, Implementation, and Field Applications

Innovative Microwave System for Safe and Efficient Coalbed Methane Extraction: Design, Implementation, and Field Applications

Cost estimation of Non-CO2 greenhouse gas emissions reduction- A bottom-up analysis of coal-bed methane extraction and utilization in Shanxi, China

This paper analyzes the synergistic effect of coal-bed methane (CBM) extraction and utilization on greenhouse gas (GHG) emissions reduction in Shanxi Province. Using data from a survey of 87 CBM extraction firms and 61 CBM utilization firms, we draw abatement cost curves of methane emission reduction with the "Conserved Supply Curve (CSC)." Our findings show large diversity among the methane abatement costs of extraction firms, meanwhile cost diversity in the extraction step is mainly due to differences in extraction technologies, rather than mine types. Power generation is the main utilization option for CBM, with much smaller abatement cost diversity than in the extraction step. Most utilization projects are established near CBM sources, with small-scale equipment supplied by domestic vendors. We suggest Shanxi could introduce a carbon pricing mechanism to further encourage CBM extraction and increase its scale. Promoting technology standardization can reduce cost diversity among extraction firms, while developing CBM purifying firms can create standardized products and break the strong integration of extraction and utilization. Strengthening CBM transportation infrastructure can form a competitive market with multi-source supply upstream and efficient transportation downstream. Promoting joint research and development for domestic CBM utilization equipment can also improve its scale.

Molecular simulation of CO2/N2 injection on CH4 adsorption and diffusion

As an efficient and clean energy, coalbed methane development and utilization have deep significance in promoting energy conservation and emission reduction, reducing greenhouse gas emissions. Therefore, molecular simulation was utilized to study the influence of N2/CO2 on the adsorption and diffusion of methane in coal under different gas injection methods and to elucidate the influence of varying gas injection methods on the efficiency of coalbed methane extraction, which provides a basis for the efficient development of coalbed methane. The results show that the adsorption effect of gases in coal decreases with the increase of temperature and increases with the rise of pressure, and the adsorption performance of the three gases in coal shows the law of CO2 > CH4 > N2. In addition, the injection of CO2/N2 had an obvious inhibition effect on CH4 adsorption, and the inhibition effect of CO2 was more significant, and the inhibition effect on CH4 adsorption reached the maximum when the two gases were mixture injected. In terms of diffusion, compared with separate injection, mixed injection of N2 + CO2 promotes CH4 diffusion more effectively, which can be reflected in the relative concentration distribution and velocity distribution. The injection of N2 helps to increase the porosity of coal, and the injection of CO2 and N2 + CO2 will lead to the decrease of porosity, but the mixed gas injection has less effect than the injection of CO2 alone.

Enhanced coalbed methane recovery by microwave-induced thermal fracture

Abstract The investigation on microwave-induced permeabilization and response of coal under microwave heating is of great significance for the industrial application of microwave heating technology instead of traditional heating in coalbed methane mining. Santanghu coal is used as a sample to measure the permeability and porosity of coal samples before and after microwave heating. The fracture changes of coal samples before and after heating are compared to observe the penetration effect of microwaves on coal samples. Based on the technology of directional drilling and continuous tubing technology in petroleum engineering, a technology of increasing the production of coalbed methane by microwave heating in a wide range of coal seams is proposed. The feasibility of this enhanced production method is validated through COMSOL Multiphysics simulations, which model the temperature field distribution within coal seams under various microwave parameters. This approach highlights the potential of microwave technology in coalbed methane recovery. The results show that: (1) the thermal field of coal samples under microwave heating is inhomogeneous. The average length and area of the cracks of the coal samples increased under microwave radiation, and the cracking of the coal samples confirmed the cracking effect of microwaves on the coal samples. (2) With prolonged microwave heating, coal samples exhibit an initial decrease followed by an increase in porosity and permeability, a trend attributed to the expansion of solid particles that occupy and reduce pore spaces. (3) The in-situ microwave heating technique for coalbed methane extraction overcomes the challenges of long-distance microwave transmission loss and methane backflow in transmission pipelines, utilizing continuous pipelines for extensive microwave heating of coal seams. (4) The microwave power and intermittent heating duration have a significant effect on the temperature field distribution of the coal seam, and when the heating duration is 60 days, 1600 W is used to have an effective temperature field distribution while avoiding the waste of heat. When the power is constant at 1600 W, the effective temperature range is wider when the intermittent heating duration is 60 days.

Research on simulating coal crack development under high voltage electric pulse stress waves using zero thickness cohesive elements

High voltage electric pulse (HVEP) technology has demonstrated significant potential in enhancing coal seam permeability. However, there is a notable gap in numerical simulation studies that investigate the cracks development patterns in coal under the influence of this technology. In this study, a HVEP coal rock fracturing system was utilized to conduct a physical simulation experiment of coal sample electrical fragmentation. A finite-discrete element method (FDEM) model, incorporating zero-thickness cohesive elements, was developed to simulate the process of stress wave-induced crack propagation in coal, triggered by the plasma channel. The results indicate that over time, the stress wave typically exhibits an initial rapid rise followed by an oscillatory decline. The peak value of the stress wave decreases significantly with distance, stabilizing beyond a propagation distance of 10 mm. Furthermore, the fracturing efficacy of coal by HVEP stress waves is closely linked to specific characteristic parameters: within the range of 75–125 MPa, a positive correlation exists between the stress wave peak and the complexity of the coal crack network. Reducing the stress wave loading rate can increase the crack area to some extent, although excessively slow loading rates may lead to excessive energy dissipation during propagation, which is detrimental to crack expansion. Conversely, when the ratio of β to α ranges from 1 to 100, decelerating the attenuation rate of the stress wave aids in generating stress concentration within the crack zone, thereby facilitating crack propagation. The established numerical model aims to advance understanding of HVEP’s fracturing mechanisms and enhance its application in coalbed methane extraction.

Research on the Effective Extraction radius of Directional Long Boreholes for Coalbed Methane Extraction Based on Gas Extraction Quantity Measurement

Research on the Effective Extraction radius of Directional Long Boreholes for Coalbed Methane Extraction Based on Gas Extraction Quantity Measurement

Micromechanism of the effect of coal functional groups on the catalytic/esterification reaction of acetic acid

Acidification modification has proven to be a successful approach for enhancing the permeability of low-permeability coal seams and increasing coalbed methane extraction. To explore the influence of acetic acid on the organic structure of coal, a combined approach of experimental research and quantum chemical calculation is employed to examine the reaction mechanism of coal organic structure in response to acetic acid. Fourier transform infrared spectroscopy reveals a reduction in the content of hydroxyl and C–O bonds in the treated samples, along with the appearance of an absorption peak of C=C bonds. This demonstrates that the main site of acetic acid acidification modification on coal molecules is the hydroxyl functional group. Therefore, glycerol can be used as a simplified model of coal molecules for further investigation. In addition, three typical functional groups (phenyl, hydroxyl, amino) are selected as the research objects. The electronic density topological properties, molecular surface electrostatic potential, Mayer bond orders and CM5 charge of coal molecules were calculated based on quantum chemical theory. This reveals the intrinsic strength of each chemical bond between single atoms in a molecule, thereby predicting potential reaction pathways between acetic acid and coal molecules. The micro-mechanism of acetic acid catalyzing/esterifying the organic structure of coal is studied using transition state methods. The computational results show that there are two main modes of reaction between acetic acid and coal molecules: (1) acetic acid catalyzes the dehydration reaction of coal molecules; (2) acetic acid reacts with coal molecules to form ester intermediates, followed by decomposition through various reactions. Among the 14 reaction pathways, acetic acid provides protons or groups to trigger the dehydration of coal molecules. Interestingly, it is found that the overall hydroxyl group participates in the reaction is easier than the individual hydrogen atom on the hydroxyl group, and the overall carboxyl group participates in the reaction is easier than the individual hydroxyl group. This indicates that the higher the overall atomic reactivity of acetic acid, the lower the reaction barrier. Compared with catalytic reactions, acetic acid tends to undergo esterification reactions with hydroxyl groups, with the phenyl ring functional group significantly affecting the reaction barrier. The introduction of various oxygen-containing functional groups like ketone, aldehyde, and ester in the reaction products will hinder the adsorption of non-polar methane, reduce the adsorption capacity of coal seams for gas, and play an essential role in promoting gas desorption. The research findings can provide theoretical guidance for the organic acidification modification of low-permeability coal seams to enhance gas permeability and coalbed methane extraction.

The Changing of Micromechanical Properties of Coal after Water Immersion: The Insight from Nanoindentation Test

The application of the hydrodynamic method has enhanced the extraction of coal bed methane (CBM). In this method, fracturing fluid rapidly penetrates the coal reservoir, altering its intrinsic pore structure and microscopic mechanical properties. These changes impact the properties of the coal reservoir and CBM depletion. It is, therefore, crucial to explore how these micro-characteristics evolve following water invasion. In this context, using nanoindentation tests, the microscopic characteristics of three coal samples were measured under dry conditions and at water saturations corresponding to 44% and 75% relative humidity. The influence of water immersion on the pore structure was also assessed using mercury injection experiments. Moreover, cluster analysis was used to categorize the extensive measured data into three sub-components: fractures (large pores), inertinite, and vitrinite, to investigate the impact of water saturation on microscopic properties. The findings indicate that cluster analysis is well-suited to these data, showing excellent agreement with porosity and maceral tests. The relationship between the elastic modulus and hardness of dry and wet coal samples varies across the sub-components. There is a notable dependency in the case of vitrinite, whereas water content tends to reduce this dependency. It is also found that water content negatively affects elastic modulus and hardness and reduces the anisotropy ratio. The mechanical properties of inertinite are highly responsive to water immersion, whereas vitrinite exhibits lesser sensitivity. The softening mechanisms of coal when immersed in water, such as calcite phase dissolution, swelling stress fracturing, and weakening of macerals, are identified. This study offers new perspectives on the impact of moisture on the alteration of micromechanical properties in coal.

Mechanical Damage to Coal and Increased Coal Permeability Caused by Water-Based Ultrasonic Cavitation

Coalbed methane (CBM), recognized as a sustainable and environmentally friendly energy source, plays a crucial role in mitigating global climate change and advancing low-carbon energy solutions. However, the prevalence of low-permeability coal seams poses a significant challenge to effective CBM extraction. Improving coal permeability has emerged as a viable strategy to address the issue of low-permeability coal. Conventional CBM stimulation methods fall short in overcoming this obstacle. In contrast, the enhanced technique of CBM extraction by water-based ultrasonic cavitation holds great promise due to its use of high energy intensity, safety, and efficiency. Nevertheless, the inadequate theoretical framework for managing this technology impedes its widespread adoption for large-scale applications. This study investigated the impact of water-based ultrasonic cavitation treatment on coal’s properties and permeability through mechanical testing and permeability measurements conducted before and after treatment. This study also explored the process by which this technology, known as WUC-ECBM, improves coal’s mechanical properties and permeability. The findings suggest a potential stimulation technique (WUC-ECBM) for use in CBM extraction, and its physical mechanism.

The effect of temperature and ultrasonic power on the microstructure evolution of coal modified by clean fracturing fluid: An experimental study

Ultrasonic-assisted fracturing permeability enhancement technology offers several advantages, including a broad range of hydraulic fracturing permeability enhancement, microstructure modified by fracturing fluid, and ultrasonic promotion of gas desorption and extraction. This technology can significantly improve the efficiency of coalbed methane extraction and has broad application prospects. To investigate the effect of ultrasonic action power and temperature on the microstructure evolution of coal by using clean fracturing fluid, experiments were conducted using coal samples from a mine in Shenyang. The pore structure of these samples was analyzed by scanning electron microscopy (SEM) and mercury intrusion method (MIP), while the chemical microstructure was evaluated with energy dispersive spectroscopy (EDS), X-ray diffraction experiment (XRD) and Fourier transform infrared spectroscopy (FTIR). The results showed that ultrasonic treatment improved the pore structure characteristics and connectivity by facilitating chemical reactions between fracturing fluid and mineral impurities. Specifically, when the ultrasonic parameter was set at 600W-60 °C, the pore volume of coal samples increased by 26.09 %, tortuosity decreased by 31.81 %, pore fractal dimension increased by 3.93 %, permeability increased by 100.45 %, aromaticity increased by 16.69 %, and the degree of branching aliphatic side-chains increased by 108.70 %. Under the same ultrasonic power, the effective temperature for ultrasonic-assisted fracturing fluid treatment on coal rock was found to be 60 °C. Additionally, under the same temperature conditions, an increase in ultrasonic power resulted in significant enhancements in both pore structure parameters and chemical structure parameters in coal, showing a certain linear relationship. The research results enrich the theoretical system of coalbed methane mining and provide theoretical guidance for the field practice of this technology.

Influence of primary interface characteristics on mechanical properties and damage evolution of coal-rock combination

Indirect fracturing technology of coal seam roofs is a crucial method to enhance coalbed methane extraction efficiency in broken soft coal seams. The cracks formed significantly increase permeability by extending from the rock-coal interface into the coal seam. The structural features of the coal-rock interface are pivotal in determining the path of crack propagation, highlighting the importance of studying the mechanical properties and damage evolution in coal-rock combinations. Industrial CT, three-dimensional (3D) reconstruction, and 3D printing technology are utilized to create physical models with authentic interface structure features. Subsequently, coal-rock combination samples exhibiting smooth and original interface characteristics are produced through a layered pouring method. Uniaxial compression experiments are conducted on various interface feature combinations to examine the impact of primary interface structure characteristics on the mechanical properties and damage evolution of the combinations. Real-time monitoring is performed using acoustic emission (AE) equipment. The results show that the compressive strength of coal-rock combinations treated with glue and pouring is significantly higher than those treated with vaseline, while the axial strain shows an opposite trend. The presence of an interface constraint effect weakens the strength of the rock near the coal-rock interface, while enhancing the strength of the coal. The damage in coal-rock combinations initially occurs in the middle and lower parts of the coal, then progresses towards the interface and rock. Finally, a uniaxial compression model considering the interface constraint effect explains and theoretically demonstrates the phenomenon observed in the experiment, where more complex coal-rock interface structures result in higher compressive capacities of samples. It provides insights for further investigation into fracture trans-media expansion and permeability enhancement during the indirect fracturing of coal seam roofs.

A viscoelastic‐healing suspension sealing material with a double‐network gel structure for improving borehole‐sealing performance

AbstractDeveloping a high‐performance sealing material to improve the sealing quality of extraction boreholes is of great significance for achieving efficient coalbed methane (CBM) extraction and safety mining. In this work, a viscoelastic‐healing suspension sealing material (VEHS) with a double‐networked gel structure was developed, consisting of a latex emulsion (LE) and polymeric superabsorbent (PSA) with the addition of fly ash (FA) and sodium montmorillonite (Na‐MMT). X‐ray diffraction, scanning electron microscopy, and rheometer tests were conducted to characterize the variation in the microstructural characteristics and rheological behaviors of VEHS, respectively. Besides, response surface methodology was utilized to model the relationships between the composition of VEHS and its viscosity and fluidity. The results show that the VEHS's structure is uniformly dense. The viscosity of VEHS, a pseudoplastic fluid, decreases progressively with an increasing shear rate while rising and stabilizing over time. Within the stress range of 10–30 Pa, VEHS exhibits relatively balanced viscoelasticity. VEHS shows excellent fluidity and can form a viscoelastic‐healing coagulated layer that is firmly adhered to the coal wall, leading to a strong sealing ability. The research has the potential to enhance the effectiveness of CBM extraction and brings the advantages in terms of safety, economy, and society.

Quantitative Analysis of Fracture Roughness and Multi-Field Effects for CO2-ECBM Projects

Carbon Dioxide-Enhanced Coalbed Methane (CO2-ECBM), a progressive technique for extracting coalbed methane, substantially boosts gas recovery and simultaneously reduces greenhouse gas emissions. In this process, the dynamics of coalbed fractures, crucial for CO2 and methane migration, significantly affect carbon storage and methane retrieval. However, the extent to which fracture roughness, under the coupled thermal-hydro-mechanic effects, impacts engineering efficiency remains ambiguous. Addressing this, our study introduces a pioneering, cross-disciplinary mathematical model. This model innovatively quantifies fracture roughness, incorporating it with gas flow dynamics under multifaceted field conditions in coalbeds. This comprehensive approach examines the synergistic impact of CO2 and methane adsorption/desorption, their pressure changes, adsorption-induced coalbed stress, ambient stress, temperature variations, deformation, and fracture roughness. Finite element analysis of the model demonstrates its alignment with real-world data, precisely depicting fracture roughness in coalbed networks. The application of finite element analysis to the proposed mathematical model reveals that (1) fracture roughness ξ markedly influences residual coalbed methane and injected CO2 pressures; (2) coalbed permeability and porosity are inversely proportional to ξ; and (3) adsorption/desorption reactions are highly sensitive to ξ. This research offers novel insights into fracture behavior quantification in coalbed methane extraction engineering.

Gas-liquid permeability of propped fracture with retained coal fine particles in coalbed methane reservoirs

Coal fine particles are easily retained in the propped fractures during hydraulic fracturing and CBM (coalbed methane) extraction, which seriously affects the gas–liquid permeability. In this paper, gas–liquid permeability test experiments of propped fractures under different retained coal fine particles concentration were conducted. The results showed that the retained coal fines discharge rate (Rd) and gas/liquid effective permeability (Kge/Kwe) decreased with the increase of the closure stress. As the gas–liquid ratio increased, the Rd of the propped fractures with retained coal fine particles decreased. The Kwe decreased significantly while Kge increased slightly, yet the gas/liquid effective permeability loss rate (lw/lg) rose. As the retained coal fine particles concentration in the propped fractures increased, both the Rd and Kge/Kwe decreased monotonously. When the retained coal fine particles concentration reached 10%, changing the gas–liquid ratio and.closure stress exerted little effect on the gas/liquid effective permeability. In addition, the lg/lw was inversely proportional to Rd within the propped fractures with retained coal fine particles. The research results are of guiding significance for optimizing the CBM extraction system, solving the problem of low gas–liquid permeability caused by retained coal fine particles, and promoting the smooth drainage of CBM.

Solid-liquid particle flow sealing mucus (PFSM) in enhancing coalbed methane (CBM) recovery: Multiple-perspectives analysis and mechanism insights

The paper presents an in-depth investigation of solid-liquid two-phase particle flow sealing mucus (PFSM) for enhanced coalbed methane (CBM) recovery. PFSM is composed of solid waste particles such as fly ash and rubber particles. The PFSM is assessed using multiple-perspectives analysis, which includes measurements of water retention, pressure expansion, rheological characteristics, adhesion, wettability, microscopy and field case studies. Single-factor and multi-factor studies are used to optimize slurry material ratios. The results show that PFSM has outstanding water retention characteristics, with over 80 % retention for 30 days at 30 °C, and impressive expansion performance, with 9.52 % at 0.6 MPa. The shear thinning curve conforms to the Cross model. After 30 s, the final contact angle is 75.17 °, which is about 6 ° smaller than that of cement based materials. Field experiments show that, after applying PFSM, the drainage gas concentration can be improved at least 60 % comparing to other sealing materials. This research findings could offer novel insights into enhancing CBM extraction, indicating potential for safer and more efficient coal mine production.

Occurrence and Potential for Coalbed Methane Extraction in the Depocenter Area of the Upper Silesian Coal Basin (Poland) in the Context of Selected Geological Factors

Coalbed methane (CBM) is the only unconventional gas in Poland with estimated recoverable resources. The prospects for developing deep CBM have been explored in recent years by drilling deep exploration wells within the depocenter of the Upper Silesian Coal Basin. The purpose of this study is to analyze the occurrence and potential for CBM extraction in this area of the basin, which can be considered prospective due to the confirmed presence of significant amounts of gas and thick coal seams at depths > 1500 m. The study examined the vertical and horizontal variability of the gas content in the studied area, the coal rank in the seams, thermal conditions, and coal reservoir parameters. The gas content in the seams, reaching more than 18 m3/t coaldaf at a depth of 2840 m, and indicative estimated gas resources of 9 billion m3 were found. The high gas content is accompanied by positive thermal and coal rank anomalies. The permeability and methane saturation of the coal seams are low, and therefore, potential methane production may prove problematic. However, the development of CBM extraction technologies involving directional drilling with artificial fracturing may encourage gas production testing in the study area.