Coal-based Power Plants Research Articles

A Study on Development in Engineering Properties of Dense Grade Bituminous Mixes with Coal Ash by Using Natural Fiber

Coal-based thermal power plants in India produce significant waste, primarily fly ash and bottom ash, which poses environmental and health risks when disposed of in large quantities. This research explores the effective use of these waste products in bituminous paving mixes, substituting natural aggregates to conserve resources. Dense-graded bituminous macadam (DBM) specimens were prepared using natural coarse aggregates, bottom ash as fine aggregate, and fly ash as filler, with sisal fiber as a reinforcing additive. Varying percentages (0–1%) and lengths (5–20 mm) of SS1 emulsion- coated sisal fiber were tested to optimize the mix’s engineering properties. VG30 bitumen, chosen for its superior Marshall characteristics, resulted in an optimum binder content of 5.57%, fiber content of 0.5%, and fiber length of 10 mm, achieving a Marshall stability of 15 kN. Additional performance tests, including moisture susceptibility, indirect tensile strength (ITS), creep, and tensile strength ratio assessments, confirmed that the coal ash and sisal fiber mix significantly enhances pavement durability. This approach offers an eco-friendly and economical solution for bituminous pavement construction, addressing coal ash disposal challenges and conserving natural aggregates. Keywords: Bottom ash, Fly ash, Sisal fiber, Emulsion, Indirect tensile strength, Static creep test, Tensile strength ratio.

CO2-selective membrane reactor process for water-gas-shift reaction with CO2 capture in a coal-based IGCC power plant

Integrated gasification combined cycle (IGCC) power plants enable pre-combustion carbon capture to reduce CO2 emissions. Membrane water-gas-shift (WGS) reactors can intensify these processes by converting raw syngas to H2 with simultaneous CO2 capture in one unit. This paper reports process design and techno-economic analysis (TEA) for a membrane reactor (MR) process with a CO2 selective ceramic-carbonate dual-phase (CCDP) membrane for WGS reaction with CO2 capture for a IGCC power plant. The target performance includes CO conversion > 95 %, hydrogen purity > 90 %, CO2 purity > 95 %, and carbon capture > 90 %. Using a commercial catalyst and a CCDP membrane, the MR can achieve the performance target at 750 °C and space velocity of 250 h−1. The outcome of the process design and TEA shows that the CCDP MR has an operating cost of $24 M/year, significantly lower than that for the conventional processes (40 M$/year). However, the MR process has a higher capital cost ($1007 M) than the conventional process ($527 M) because of the higher cost of the CCDP MRs. Modeling analysis shows a MR with higher CO2 permeance can deliver the target at a higher space velocity and lower membrane surface area to catalyst volume ratio, leading to a significantly reduced MR capital costs.

Multi-faceted sustainability improvement in low voltage power distribution network employing DG and capacitor bank

Efficient distribution of active and reactive power in distribution networks is crucial for ensuring that consumer demand is met and that electrical power quality is maintained. This requires careful planning, particularly in terms of optimally placing and sizing distributed generator (DG) and capacitor bank (CB) units. These units play a key role in minimizing power losses and voltage fluctuations within the network. However, implementing DG and CB units in unbalanced distribution networks presents unique challenges due to inherent system unbalances. To address these challenges, this article proposes a method for allocating and sizing DG and CB units in unbalanced distribution networks. The approach accounts for the network's unbalance and targets multiple objectives, such as reducing power losses, improving multi-phase voltage stability, and minimizing phase-to-phase voltage unbalance. The fast and flexible radial power flow (FFRPF) technique is employed to model complex interactions and constraints within the network, leading to a multi-objective optimization problem. This optimization problem is solved using the weight aggregated particle swarm optimization (WA-PSO) method, a variant of particle swarm optimization tailored for multi-objective functions. WA-PSO simplifies the process by combining multiple objectives into a single function using weighted aggregation. The efficacy of this approach is validated on 19, 34, and 123-node unbalanced radial distribution networks (URDNs). The results show significant improvements in power delivery efficiency across all tested networks, especially when DG and CB units are operated simultaneously. Specifically, DG and CB integration led to a reduction in system losses by 89.90 %, 88.42 %, and 86.87 %, and a decrease in three-phase voltage unbalance indices by 88.75 %, 81.68 %, and 39.05 %, for the 19, 34, and 123-node systems, respectively, while maintaining voltage stability within acceptable limits. Additionally, CO2 emissions were reduced by 52 %, 62 %, and 53 % when microturbines were utilized instead of coal-based thermal power plants, further highlighting the environmental benefits of the proposed approach.

Symposium Review: Exploring the role of geosciences in carbon storage

Carbon capture and storage (CCS) is crucial for clean energy transitions, yet its adoption in Southeast Asia has been slow. In India, the drive for sustainable energy and CCS research intensified after the prime minister set a net-zero target of 2070. Major industries (e.g., steel, cement, and coal-based power plants)have been encouraged to adopt sustainable practices. India is developing domestic CCS capabilities and is open to importing proven technologies.

Valorization of food waste into hydrogen energy through supercritical water gasification: Generation potential and techno-econo-environmental feasibility assessment

Food waste (FW) is a significant portion of the solid waste produced by cities, and it has become a global problem due to the poor management of food distribution and consumption. The improper disposal of FW in landfills precipitates pervasive global environmental predicamentsHowever, effective management strategies have the potential to convert this large amount of garbage into a very effective renewable energy source, particularly through the generation of environmentally friendly hydrogen. This study examines the capacity for energy generation and the practicality of hydrogen production in Bangladesh using supercritical water gasification technology. The findings indicate that approximately 489 MW of electricity can be extracted from approximately 23 million tons (Mt) of FW in 2023, with a projected escalation to around 2042 MW by 2042, coinciding with an anticipated surge in FW generation to approximately 110 Mt. Moreover, the study delves into the economic feasibility of these gasification endeavors, employing diverse metrics encompassing total life cycle cost, net present value, investment payback duration, levelized cost of energy, and internal rate of return. Technoeconomic analyses divulge an investment with a net present value of 11,669.4 M$M$, an 11-year payback period, and an internal rate of return of 14 %. In addition, the research assesses the technological, economic, and environmental viability inherent in the establishment of gasification-based electricity-generating facilities in Bangladesh's preeminent eight cities by 2023. This examination postulates that a transition from coal-based power plants to those powered by food waste would precipitate an annual reduction of 3.59 Mt in carbon dioxide emissions.

Understanding physiological, elemental distribution and bioaccumulation responses of crustose and foliose lichens in the vicinity of coal-based thermal power plant, Raebareli, Uttar Pradesh, India

Environmental pollution, especially from coal-based thermal power plants, poses significant risks to human respiratory health and the environment. This study evaluates the diversity of lichens in the areas. Physiological and bioaccumulation responses of two crustose lichens (Bacidia incongruens and Rindoina sophodes) and one foliose lichen (Pyxine cocoes) in the vicinity of the Feroz Gandhi Unchahar National Thermal Power Corporation, Raebareli, Uttar Pradesh, India were also assessed. These lichens, exposed to emissions including fly ash, greenhouse gases, metals, and particulate matter were analyzed for metal accumulation and physiological responses. Changes in physiological parameters and metal profiles concerning distance from the coal-based thermal power plant to the outskirts were analyzed for B. incongruens, R. sophodes and P. cocoes by utilizing Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The study identified 18 lichen species from 12 genera and 10 families in the area, with Pyxine sorediata newly recorded in Uttar Pradesh. The dominant species, B. incongruens, P. cocoes, and R. sophodes, preferred substrates like Mangifera indica, Acacia nilotica, and Azadirachta indica bark. Physiological analyses revealed variations in pigment concentrations, with significant differences in chlorophyll a, chlorophyll b, total chlorophyll, carotenoids, and chlorophyll degradation, while protein content remained stable. Metal accumulation studies showed nine metals with distinct patterns, B. incongruens had higher concentrations in the west (52730.61 µg g-1) and P. cocoes in the east (23628.32 µg g-1). Correlation analyses indicated significant relationships between paired elements, suggesting specific sources of environmental contamination. This research highlights the significance of integrating physiological and environmental factors to understand lichen responses to coal based thermal power plant.

Investigation of co-combustion characteristics and kinetics of low-ranked coal and hydrochar derived from cow manure

CO2 emission should be reduced by the effective utilization of low-ranked coal in a coal-based power plant based on co-combustion of coal and biomass. This study investigated the co-combustion behavior of lignite and cow manure using three different kinds of samples: raw lignite coal blended with cow manure (CM-L), raw lignite coal blended with hydrochar derived from cow manure (HCM-L), and co-hydrothermal carbonization (Co-HTC) of lignite coal and cow manure (Co-HCML) using thermogravimetric analysis and a hydrothermal carbonization (HTC) temperature of 200 °C for 60 min. The kinetic parameters were calculated and analyzed using the Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose methods. The combustion characteristics were studied of the various kinds of hydrochar mixed with lignite coal. The results showed that the low-ranked coal improved the fuel properties by increasing carbon content and decreasing sulfur through the HTC processes. The activation energy of Co-HCML was the lowest, which is preferable, and therefore it was recommended as the promising process.

Comparative Analysis of Single Stage and Dual Stage PV Based Generation System for Pollution Reduction in Asian Nations

The growing need for sustainable and clean energy solutions has elevated photovoltaic (PV) systems to the forefront of competitive options. In order to evaluate the performance and viability of single-stage and dual-stage single-phase PV voltage source inverter systems within the context of renewable energy, this study undertakes a thorough comparative analysis. MATLAB Simulink has been used to run the simulations, and the results produced show that the selected configurations are robust and closely match theoretical expectations. The study explores the subtle distinctions, benefits, and drawbacks that come with single- and dual-stage systems. By extensively evaluating the consequences on system stability, grid synchronisation, and power quality, useful insights emerge. The simplicity and efficiency of the single-stage system are demonstrated by the direct connectivity between the PV MPPT output and the inverter. In contrast, the dual-stage system addresses the issue of low PV output voltage by incorporating a boost converter with an MPPT algorithm, albeit at the expense of more parts and complexity. The research described here adds a great deal to the current discussion on PV system optimization. The study notably clarifies methods for improving dependability and efficiency in applications involving renewable energy. With the increasing worldwide trend towards sustainable energy, it is critical to comprehend the subtle dynamics of various PV setups. In addition to offering a comprehensive grasp of the complexities involved in single- and dual-stage single-phase PV voltage source inverter systems, this research paves the way for future developments in the planning and execution of effective renewable energy solutions especially for Asian nations that still rely on coal-based power plants. Increased contribution of solar based electricity generation will lead to a significant drop in pollution contributed by the ash and gases released by thermal power plants that employ fossil fuels. The ultimate goal of this study is to provide information to stakeholders in the renewable energy industry so that they may make more informed decisions and create PV systems that are both sustainable for the environment and efficient for the utility.

Thermoeconomic analysis of organic Rankine cycle with different working fluids for waste heat recovery from a coal-based thermal power plant

Thermoeconomic analysis of organic Rankine cycle with different working fluids for waste heat recovery from a coal-based thermal power plant

Design Of Tangentially Fired Pulverized Coal Burner Nozzle For Enhanced Erosion Resistance

Erosion-induced failure of pulverized coal burner nozzles (PCBN) presents a significant challenge in pulverized coal-based thermal power plants. Investigations have identified multiple causative factors leading to the accelerated degradation and consequent reduced lifespan of PCBN. These factors include the erosive impact of solid fuel particles carried at high velocities and angles, as well as the high-temperature conditions within the combustion zone. To mitigate erosion, strategies often revolve around enhancing material resistance or optimizing aerodynamic profiles to minimize drag forces. This study employs Computational Fluid Dynamics (CFD) via the CFX code to model and analyze the erosion dynamics within PCBN. By adjusting the geometry of the inner plates within the PCBN, simulations indicated a notable improvement in erosion resistance. The optimized design achieved this by expanding the flow area between the innermost bifurcated plates without altering their angle, leading to a more uniform flow distribution and favorable velocity and pressure gradients. These modifications have the potential not only to prolong nozzle life but also to contribute to more efficient combustion in tangentially fired furnaces.

Evaluating the effect of fly ash on soil properties and germination of rice (Oryza sativa): A study on the utilization of thermal power plant residue

India has a power capacity of 4,02,817 MW, with over half coming from coal-based thermal power plants like the Kolaghat Thermal Power Plant (KTPP), West Bengal, India. These plants produce harmful fly ash, requiring safe disposal. KTPP alone generated 0.5921 million tons of fly ash in 2020-21, managed using ash ponds. Concerns have arisen regarding contamination of nearby agricultural fields, impacting rice cultivation. The objective of the study was to understand how fly ash affects soil and seed germination and emphasizes the importance of making careful decisions when using industrial residues in agriculture to ensure sustainable and responsible practices that prioritize environmental health and plant well-being.Samples were collected from areas near KTPP, and plant growth substrates were prepared by mixing control soil with varying fly ash concentrations. The study was conducted between 15 February and 19 May 2023 in PnaskuraBanamali College (Autonomous), Purba Medinipur, West Bengal, India. The physical and chemical properties of these substrates were analyzed, and rice seed germination studies were carried out over 30 days. The subsequent transplantation and growth assessments included measuring shoots and roots, analyzing leaf chlorophyll and carotenoids, and conducting statistical evaluations. The experiments were triplicated, and statistical analyses using SPSS 16 indicated statistical significance at p less than 0.05.The study helps to understand how fly ash affects soil and seed germination, revealing both positive and negative effects on soil properties and plant growth. It emphasizes the need for careful decision-making when using industrial residues in agriculture to ensure sustainable and responsible practices that prioritize both environmental health and plant well-being.

Long-term PM2.5 exposure is associated with asthma prevalence and exhaled nitric oxide levels in children.

Exhaled nitric oxide concentration (FENO) is a marker of airway inflammation. This study aimed to evaluate the association of air pollution exposure with FENO levels and asthma prevalence with respiratory symptoms in school children. We analyzed 4736 school children who reside in six townships near industrial areas in central Taiwan. We evaluated asthmatic symptoms, FENO, and conducted the environmental questionnaire. The personal exposure of PM2.5, NO, and SO2 was estimated using land-use regression models data on children's school and home addresses. Annual exposure to PM2.5 was associated with increased odds of physician-diagnosed asthma (OR = 1.595), exercise-induced wheezing (OR = 1.726), itchy eyes (OR = 1.417), and current nasal problems (OR = 1.334) (P < 0.05). FENO levels in the absence of infection were positively correlated with age, previous wheezing, allergic rhinitis, atopic eczema, near the road, and for children with high exposure to PM2.5 (P < 0.05). An increase of 1 μg/m3 PM2.5 exposure was significantly associated with a 1.0% increase in FENO levels for children after adjusting for potential confounding variables, including exposures to NO and SO2. Long-term exposures to PM2.5 posed a significant risk of asthma prevalence and airway inflammation in a community-based population of children. Annual exposure to PM2.5 was associated with increased odds of physician-diagnosed asthma and nasal problems and itchy eyes. Long-term exposures to PM2.5 were significantly associated with FENO levels after adjusting for potential confounding variables. This is first study to assess the association between FENO levels and long-term air pollution exposures in children near coal-based power plants. An increase of 1 μg/m3 annual PM2.5 exposure was significantly associated with a 1.0% increase in FENO levels. Long-term exposures to PM2.5 posed a significant risk of asthma prevalence and airway inflammation in a community-based population of children.

Sustainable utilisation of rice husk for cleaner energy: A circular economy between agricultural, energy and construction sectors

Global research focuses on cleaner and sustainable energy alternatives like biomass due to the limited availability of coal and high CO2 emissions associated with coal combustion. Rice husk-based electricity generation is hindered by the absence of cogeneration facilities in rice mills. Rice (Oryza sativa) cultivation is wide-spread and constructing several biomass plants at various locations is uneconomical. Hence, instead of using as biomass, rice husk is field burnt as a method of disposal. Construction of only few rice cogenerations facilitates and using already existing sugar mills and coal based thermal plants cogeneration facilities in a combined way is cost-effective and sustainable solution. Therefore, the present study examines the synergistic utilisation of sugar mills, coal-based power plants and only few newly proposed biomass power plants for effective combustion of rice husk. Maharashtra, one of the largest states in India is considered as the study area. Already existing 181 sugar mills, 18 thermal power plants are considered in 36 districts of Maharashtra state. Site suitability analysis was performed using a multi-criteria decision-making technique and ArcGIS. Furthermore, sensitivity analysis was conducted to assess the robustness of the suitability index values. From the analysis, it is found that nine districts require new biomass power plants. In remaining 27 districts use of already existing cogeneration facilities at sugar mills and coal-based power plants are found to be economical than new plants. In addition, 98.7 % of carbon emission was reduced when rice husk is used instead of coal for generating the equivalent quantity of power.

Thermo-Economic Analysis of Organic Rankine Cycle with Different Working Fluids for Waste Heat Recovery from Coal-based Power Plant

The utilization of waste heat from power plants, which is generally lost to the atmosphere, can reduce energy waste significantly. Heat recovery systems can be integrated with power plants to utilize the waste heat, improving plant energy efficiency and reducing fossil fuel consumption and carbon emissions. The current study is focused on harnessing waste heat through the Organic Rankine Cycle (ORC) from 500 MWe supercritical power plant with CO2 capture. The simulation flow sheet program “Cycle-Tempo” models and simulates different plant layouts. This study considered five different working fluids for ORC, such as R245fa, Benzene, Methanol, Ethanol, and Acetone. The ORC generates additional electricity of 9.91 MWe for R245fa, 14.11 MWe for Benzene, 13.71 MWe for Methanol, 14.04 MWe for Ethanol and 13.97 MWe for Acetone. The thermodynamic study concludes that ORC based on benzene is the best, and the economic analysis discloses that ORC based on ethanol is the best among all working fluids with a payback period of 0.869 years and cost of electricity of Rupees 1.101 per kWh. This study also concludes that the novel technique used in the present study is economically viable, contributing to a more energy-efficient and environmentally friendly power generation system.

Physical, Mechanical, and Durability Properties of Concrete with Class F Fly Ash

Concrete is one of the most used manufactured materials in the world. Fly ash (FA) is a byproduct produced from pulverized coal combustion in power generation. A total of 0.08 million tons of class F fly ash is produced from a coal-based power plant yearly in Barapukuria, Bangladesh, whose disposal is of a great issue. Therefore, this study aims to explore the possibility of using class F FA in concrete construction as a supplementary cementitious material. In this study, two different water-to-cement ratios (0.4 and 0.5), each with five cement replacement levels numerically, 0%, 10%, 20%, 30%, and 40% with FA are used. Various tests are performed on cylinder and beam specimens to assess physical, mechanical, and durability properties, such as workability, density, compressive strength (CS), splitting tensile strength (STS), flexural strength (FS), chloride ion penetrability (CIP), and shrinkage. Analyzing the results, it is reported that workability increases and density decreases with the increasing FA replacement. Mechanical properties mostly decrease with increasing FA content. However, the strength gained with age is higher for concrete with FA compared to the control concrete. The CIP reduces with FA replacement, especially at 56 days of age. Shrinkage value reduces 82% at 40% replacement FA replacement and w/c ratio 0.4. However, at 10% FA replacement and concrete age of 56 days, mechanical strength loss is infinitesimal or even better compared to the control concrete. Thus, a low replacement percentage of FA with a high curing period is a suitable concrete cement alternative.

Revitalizing PT. Sindo Energy (SE): A Forward-Thinking Proposed Scenario Planning to Navigate Coal-Regulatory Changes and Ensure Sustainability

Coal is a valuable natural resource that belongs to the Indonesian state and serves as a crucial raw material for fulfilling the country’s primary energy requirements. Starting from 2022, the Government has made a formal declaration to attain Net Zero Emissions (NZE) by the year 2060. Presidential Decree no. 112 of 2022 has been issued to expedite the development of renewable energy for electricity supply. One of the consequences of this decree is the discontinuation of coal-based power plants, reflecting the government’s dedication to transitioning to alternative energy sources in the future. Sindo Energy (SE) is a mining contractor services company that operates under the Indonesia Mining Alliances (IMA). It specializes in the coal industry and has a significant market share, contributing to a Gross Profit Margin of 93.43%. Naturally, projects that collaborate with SE are firms that own coal and so have the power to influence the overall business operations. This study aims to offer a comprehensive and enduring perspective on the potential future occurrences of scenario planning. The fundamental basis for creating the four scenarios, namely Believing Spirit (BS), Pioneer of Changes (PC), Truly Fighter (TF), and Chameleon Specialist (CS), involves identifying the major focal issues, driving reasons, and sources of uncertainty. This research outlines four scenarios that depict the projected industrial conditions in 2040. Each scenario presents different ramifications and possibilities, as outlined in the study. This research also generates pre-emptive indicators for SE business, which will subsequently prove valuable for corporations in formulating strategic measures that the company can adopt to confront potential situations in the face of future uncertainty, via implementation plans spanning a minimum of 15 years, in the upcoming year.

Development of sustainable water-resistant binder with FGD gypsum & fly ash, and its environmental impact evaluation via carbon footprint and energy consumption analysis

A sustainable water-resistant binder was developed utilizing flue gas desulphurized (FGD) gypsum and fly ash (FA), which are byproducts of coal-based thermal power plants. FGD gypsum was subjected to calcination, resulting in the formation of β-hemihydrate plaster. Various trial mixes of binders were then formulated, incorporating different proportions of β-hemihydrate (50–75%) and fly ash (15–40%), along with a fixed amount of OPC (10%) and activators. The physio-chemical and mechanical properties of the sustainable binders were evaluated, leading to the recommendation of a binder mix (P4) containing 30% fly ash and 60% β-hemihydrate plaster due to its favorable cost-effectiveness. Binder mixes P4 exhibited a compressive strength of 10.25 MPa after 28 days, with a water absorption rate of 9.25%. To assess the durability of the binders, they were subjected to extreme weather conditions, evaluating their strength under hot and cold temperatures. The binder mixes displayed low thermal conductivities (0.140–0.153 W/m.K), making them suitable for insulation applications. Furthermore, the binders achieved a Class 1 classification based on fire test analysis according to BS 476–1997. The development of these binders serves the dual purpose of waste management by utilizing byproducts and providing an economical alternative to the cement industry for both internal and external applications. It propels the construction industry toward a future characterized by reduced carbon emissions.

Sustainability of Renewable Energy Options as Compared to Coal-Fired Power Plants in Pakistan

Though frequent availability of energy is vital for economic growth, using any energy source can have a certain degree of impact on the environment. Pakistan is facing the worst power crisis nowadays. The government of Pakistan has been focused to find energy solutions in fossil fuels. As the world moves towards a clean sustainable direction, coal sources, are cheap at the moment, and new coal-based power plants can be put up quickly with a predictable output, but with the degradation of the environment, Pakistan can utilize sustainable energy resources such as biomass, solar energy, hydropower, and wind power; which are frequently available in Pakistan and can generate environment-friendly power above 40,000 MW. It is necessary to consider these sustainable energy resources, as their prices have been dipping dramatically and it is now cheaper to build new commercial plants based on improved technologies able to generate more electricity. The present paper discusses the insight environment-friendly sustainable energy options available in Pakistan other than coal-fired plants to overcome future energy demand.

Cooking with Modern Energy in Rural Households of India

Between 2016 and 2019, there has been an improvement in the percentage of rural households using clean cooking energy, partly owing to government interventions. However, unclean solid fuels are still the primary source of energy for cooking purposes for about 60% of rural households. One of the foremost reasons for this is the cost of acquiring and using clean energy sources. This paper estimates the cost incurred by a household when switching from solid fuels to liquefied petroleum gas (LPG) or electricity for cooking, followed by a social cost–benefit analysis of two interventions: universal provision of LPG to all rural households and universal provision of electricity to all rural households. The findings suggest that electricity is a cheaper alternative to LPG at the household level; however, investing in the universal provision of LPG is socially beneficial for the government. Universal provision of electricity for cooking can only become socially beneficial if the proportion of renewable electricity increases, reducing the environmental costs of carbon emissions from coal-based power plants. Keywords: LPG, electricity, cost, benefit, social, energy

Multi-objective optimization of a hybrid renewable energy system supplying a residential building using NSGA-II and MOPSO algorithms

Multi-objective optimization of a hybrid system is investigated to supply an autonomous residential building. The proposed system consists of photovoltaic panel, wind turbine, ground source heat pump, diesel generator, battery bank, and fuel cell. This study presents an innovative approach in optimization considering all economic, technical, environmental, and social aspects. Objective functions include loss of power supply probability (LPSP), levelized cost of energy (LCOE), CO2 emission, and human development index (HDI) that are optimized simultaneously. Also, the simulation-based approach in NSGA-II and MOPSO algorithms is used to estimate the Pareto front. The Pareto front solutions are the optimum points that help decision-makers choose the best system configuration based on priorities. Due to the importance of renewable energy utilization and reliability, two conditions of renewable fraction (RF) > 70% and LPSP < 0.05 are considered to select the optimal systems. Among the selected systems, the solutions with the highest RF also generated more extra energy. Diesel generators are much less expensive than fuel cells; however, the environmental benefits of the fuel cell make this technology attractive. Therefore, systems that use only the diesel generator as a backup unit have lower LCOE and higher CO2 emissions. LCOE in selected solutions is reduced by 51 to 88% by selling extra power to the grid. The environmental assessment results show that CO2 emissions in selected systems compared to coal-based power plants and natural gas power plants are decreased by 46–100% and 3–100%, respectively. Also, Pareto fronts evaluation shows that the NSGA-II algorithm's solutions covered a more extensive range and scattered more uniformly.