Electrocatalysts For CO2 Reduction Reaction Research Articles

Experimental and Computational Study Toward Identifying Active Sites of Supported SnOx Nanoparticles for Electrochemical CO2 Reduction Using Machine-Learned Interatomic Potentials.

SnOx has received great attention as an electrocatalyst for CO2 reduction reaction (CO2RR), however; it still suffers from low activity. Moreover, the atomic-level SnOx structure and the nature of the active sites are still ambiguous due to the dynamism of surface structure and difficulty in structure characterization under electrochemical conditions. Herein, CO2RR performance is enhanced by supporting SnO2 nanoparticles on two common supports, vulcan carbon and TiO2. Then, electrolysis of CO2 at various temperatures in a neutral electrolyte reveals that the application window for this catalyst is between 12 and 30°C. Furthermore, this study introduces a machine learning interatomic potential method for the atomistic simulation to investigate SnO2 reduction and establish a correlation between SnOx structures and their CO2RR performance. In addition, selectivity is analyzed computationally with density functional theory simulations to identify the key differences between the binding energies of *H and *CO2 -, where both are correlated with the presence of oxygen on the nanoparticle surface. This study offers in-depth insights into the rational design and application of SnOx-based electrocatalysts for CO2RR.

Highly dispersed nickel-copper bimetallic catalysts prepared by monolayer NiCu-layered double hydroxide nanocomposites for CO2 electrocatalytic reduction

The design of novel electrocatalyst for CO2 reduction reaction to available chemical substance is a meaningful approach to mitigate the CO2 emission problem. However, it is challenging to achieve uniform dispersion of the metals in the carbon substrate to enhance catalytic performance. Surprisingly, layered double hydroxide nanosheets have uniform metal distribution, which are appropriate metal negative supports for CO2RR catalyst. Herein, we have successfully prepared a simple, green and efficient novel CO2RR metal catalyst using monolayer NiCu-LDH nanocomposites as precursor. Based on solid phase exfoliation, monolayer NiCu-LDH nanocomposite material was obtained, and then the ultra-thin two-dimensional carbon substrate with homogeneous metals dispersion was formed by in-situ nitridation. The obtained Ni2Cu1-CN shows excellent CO2RR performance with CO current density of 12.65 mA cm−2 and great CO faraday efficiency of 96.9 % at −0.8 V (vs. RHE). But metals formed nanoparticles due to vibration migration at high temperature, which caused active sites to be obscured. Surprisingly, introduction of Zn prevented Cu and Ni metals from agglomerating and exposed more active sites. The as‐prepared Ni2Cu1Zn1-CN shows excellent catalytic performance with the greatest CO faraday efficiency of 98.1 % and high CO current density of 16.6 mA cm−2 at −0.8 V (vs RHE) and remarkable stability.

Insight on Zn-Al LDH as electrocatalyst for CO2 reduction reaction: An in-situ ATR-IR study

Electrochemical reduction of CO2 (CO2RR) is expected to play a key role among the various strategies being explored to limit global warming. In this scenario, Layered Double Hydroxides (LDHs) are emerging as a promising class of electrocatalysts to replace the most used noble metals. In this work three Zn-Al LDH with different Zn2+/Al3+ ratio were synthesized and characterized by means of XRD, STEM-EDX and HR-TEM. Their suitability for CO2RR to CO was assessed by means of a custom-made three-compartment cell, showing an increase in CO selectivity by decreasing the Zn2+/Al3+ ratio. The CO2 interaction with the samples was firstly characterized by means of volumetric adsorption measurements, exhibiting an increase in capture capacity by decreasing the Zn2+/Al3+ ratio. The evolution of the samples in interaction with a CO2-saturated liquid flow was then deeply investigated by means of in-situ ATR-IR spectroscopy. The samples displayed a different evolution in the vibrational region of the carbonate-like species (1800–1200 cm−1). To better discriminate the different carbonate cyclohexane was also employed. A definitive assignment of the main IR bands of the carbonate was carried out by studying the spectral behavior of the different bands observed in the ATR-IR experiments and by comparing these results with the existing literature. Interestingly, Zn-Al 1:2 LDH, the most efficient electrocatalyst for CO2RR, is also the sole sample exhibiting a higher monodentate to total bidentate carbonates ratio, suggesting that the existence of a higher content of low coordination oxygen anions with stronger basic character can influence the final catalytic activity.

Activating *CO by Strengthening Fe–CO π‐Backbonding to Enhance Two‐Carbon Products Formation toward CO2 Electroreduction on Fe–N4 Sites

AbstractMany non‐precious metal‐nitrogen (M–Nx)‐containing catalysts are highly efficient for electrochemical reduction of CO2 to CO and yet encounter challenges in further converting CO to more valuable two‐carbon products (C2), such as ethanol and acetic acid. The ambiguous structure‐activity relationship of the M–Nx moieties toward CO2 reduction reaction (CO2RR) results in difficulties in regulating the CO2RR product selectivity on the M–Nx‐containing catalysts. Herein, by using fluorinated iron phthalocyanines with axial‐coordinated ligands (L–FePc–F) as an M–N4‐based model electrocatalyst for CO2RR, a correlation between the electronic structure and C2 selectivity of Fe–N4 is revealed and a comprehensive descriptor based on the Fe–CO π‐backbonding is proposed for guiding the regulation of M–N4 toward higher C2 selectivity. Based on the regulation principle, the Br‐axial‐coordinated FePc–F (Br–FePc–F) remarkably increases the Faradic efficiency (FE) of C2 products from 0% (i.e., the FEC2 of FePc–F) to 34% due to the strengthened Fe–CO π‐backbonding stemming from the elevated 3dxz/dyz orbital energy and enhanced electron‐donating ability of the Fe centers of Fe–N4. This work provides a strategy and mechanism insights on the regulation of the C2 selectivity of CO2RR on the Fe–N4 moieties, which may be inspiring for precise construction and regulation of the M–Nx‐containing catalysts for specific CO2RR products.

Amorphous ZnSnOx Hollow Spheres Enable Highly Efficient CO2 Reduction.

Carbon dioxide (CO2) adsorption and electron transport play an important role in CO2 reduction reaction (CO2RR). Herein, we have demonstrated a new class of diverse hollow ZnSnOx (ZSO) through the amorphization of hydroxides to enhance CO2 adsorption and accelerate electron transport. The amorphization is occurred by calcination process, as indicated by Fourier transform infrared spectroscopy and Raman spectra. In particular, the ZnSnOx hollow spheres (ZSO HSs) achieve a high Faradaic efficiency (FE) of HCOOH up to 92.7 % at best, outperforming the commercial ZSO (Comm. ZSO, 85.7 %). ZSO HSs also exhibit durable stability with negligible activity decay after 10 h of successive electrolysis. In-situ attenuated total reflectance infrared absorption spectroscopy further reveals strong adsorption of CO2 and rapid intermediate configuration transformation in amorphous ZSO HSs. This work demonstrates the practical application of ZSO for CO2RR and provides a new insight to create efficient CO2RR electrocatalysts.

Halide precursor reduction strategy to modulate bismuthene with high selectivity and wide potential window for electrochemical CO2 reduction

AbstractDeveloping high‐performance electrocatalysts for CO2 reduction reaction (CO2RR) is vital in achieving a carbon‐neutral society by converting CO2 into valuable chemicals. CO2RR electrocatalyst with lower overpotential, higher selectivity and wider working potential range is urgently desired, but it is still challenging to realize these factors simultaneously. Here, high‐performance bismuthene‐based electrocatalysts were synthesized by reducing bismuth precursors like BiCl3, BiBr3, and BiI3 in liquid phases. Especially, bismuthene‐I derived from BiI3 showed a nanosheet morphology (around four‐layer) with significantly enhanced (110) surfaces. It enabled an ultrawide potential window (0.7 V) for high formate selectivity (>90%) in a H‐type cell and achieved an ultralow potential (−0.46 V vs. reversible hydrogen electrode) to attain a current density of 200 mA cm−2 in a gas‐diffusion flow cell. The prominent long‐term operational capability of bismuthene‐I was demonstrated in both H‐type and gas‐diffusion cells. Density functional theory calculations revealed that bismuthene‐I possessed abundant topological Bi(110) surfaces states that can reduce the CO2RR overpotential, suppress the competitive hydrogen evolution reaction, and facilitate electron donation during CO2 electrocatalysis. The bismuthene‐I realized low overpotential, high selectivity and wide working potential range simultaneously for electrochemical CO2RR. This work unfolds the broader plausibility of facilely reducing precursors for the scalable fabrication of high‐performing CO2RR electrocatalysts.

Screening of Cu-Mn-Ni-Zn high-entropy alloy catalysts for CO2 reduction reaction by machine-learning-accelerated density functional theory

High-entropy-alloy (HEA) catalysts have been used in many challenging electrocatalytic reactions, e.g., CO2 reduction reaction (CO2RR) due to their promising properties. For CO2RR catalysts, tuning metal compositions in Cu-based catalysts is one of the techniques to control the desired products. Thus, this work investigated the optimal composition of Cu-Mn-Ni-Zn HEA catalysts using high-throughput screening (HTS) for CO2RR targeting on two competing routes toward CH4 and CH3OH products. The screening protocol evaluates catalytic activity through adsorption energy (Eads) of *CO2, *CO, *COOH, and *H. At the same time, the selectivity is represented by Eads of *COH, *CH4, *CHO, and *CH3OH, using density functional theory (DFT) accelerated by machine learning techniques. The screening result from 11,920 data revealed 259 candidates for CH4-selective and 4,214 for CH3OH-selective catalysts. Interestingly, the Cu-Mn-Ni-Zn excellently prevented competitive hydrogen evolution reaction by up to 90%. Optimal composition for each route are Cu0.1Mn0.4Ni0.2Zn0.3 and Cu0.2Mn0.4Ni0.1Zn0.3 in CH4-selective route and Cu0.3Mn0.3Ni0.2Zn0.2, Cu0.3Mn0.2Ni0.3Zn0.2, Cu0.3Mn0.2Ni0.2Zn0.3, and Cu0.2Mn0.3Ni0.3Zn0.2 in CH3OH-selective route. The optimal catalyst structure with high CO2RR activity in both routes was revealed to have the Mn atom as an active site, while Cu, Ni, and Zn as neighboring atoms. Hence, the Cu-Mn-Ni-Zn HEA catalyst is the promising electrocatalyst for CO2RR.

Charge‐switchable ligand ameliorated cobalt polyphthalocyanine polymers for high‐current‐density electrocatalytic CO2 reduction

AbstractMetallic phthalocyanines are promising electrocatalysts for CO2 reduction reaction (CO2RR). However, their catalytic activity and stability (especially under high potential) are still unsatisfactory. Herein, we synthesized a covalent organic polymer (COP‐CoPc) by introducing charge‐switchable viologen ligands into cobalt phthalocyanine (CoPc). The COP‐CoPc exhibits great activity for CO2RR, including a high Faradaic efficiency over a wide potential window and the highest CO partial current density among all ligand‐tuned phthalocyanine catalysts reported in the H‐type cell. Particularly, COP‐CoPc also shows great potential for practical applications, for example, a FECO of >95% is realized at a large current density of 150 mA/cm2 in a two‐electrode membrane electrode assembly reactor. Ex situ and in situ X‐ray absorption fine structure spectroscopy measurements and theory calculations reveal that when the charge‐switchable viologen ligands switch to neutral‐state ones, they can act as electron donors to enrich the electron density of Co centers in COP‐CoPc and enhance the desorption of *CO, thus improving the CO selectivity. Moreover, the excellent reversible redox capability of viologen ligands and the increased Co–N bonding strength in the Co–N4 sites enable COP‐CoPc to possess outstanding stability under elevated potentials and currents, enriching the knowledge of charge‐switchable ligands tailored CO2RR performance.

Silver frameworks based on a tetraphenylethylene-imidazole ligand for electrocatalytic reduction of CO2 to CO.

Metal-organic frameworks (MOFs) can be used as electrocatalysts for the CO2 reduction reaction (CO2RR) because of their well-dispersed metal centers. Silver is a common electrocatalyst for reduction of CO2 to CO. In this study, two Ag-MOFs with different structures of [Ag8O2(TIPE)6](NO3)4 (Ag-MOF1) and [Ag(TIPE)0.5CF3SO3] (Ag-MOF2) [TIPE = 1,1,2,2-tetrakis(4-(imidazol-1-yl)phenyl)ethene] were synthesized and used for CO2 electroreduction. The results show that Ag-MOF2 is superior to Ag-MOF1 and exhibits high CO faradaic efficiency (FE) of 92.21% with partial current density of 29.51 mA cm-2 at -0.98 V versus reversible hydrogen electrode (RHE). The FECO is higher than 80% in the potential range of -0.78 to -1.18 V. The difference may be caused by different framework structures leading to different electrochemical active surface areas and charge transfer kinetics. This study provides a new strategy for designing and constructing CO2 electroreduction catalysts and provides potential ways for solving environmental and energy problems caused by excessive CO2 emission.

A novel two-dimensional cobaltporphyrin-based organic framework as a promising electrocatalyst for CO2 reduction reaction: a computational study

Nine two-dimensional (2D) metalloporphyrin organic frameworks are designed and constructed by copper clusters and metalloporphyrins, in which the Co-PMOF is identified as the best electrocatalyst toward the CO2 reduction reaction among them.

Composite interfaces of g-C3N4 fragments loaded on a Cu substrate for CO2 reduction.

Designing an electrocatalyst with high efficiency and product selectivity is always crucial for an electrocatalytic CO2 reduction reaction (CO2RR). Inspired by the great progress of two-dimensional (2D) nanomaterials growing on Cu surfaces and their promising CO2RR catalytic efficiencies at their interfaces, the unique performance of Cu-based 2D materials as high-efficiency and low-cost CO2RR electrocatalysts has attracted extensive attention. Herein, based on density functional theory (DFT) calculations, we proposed a composite structure of graphitic carbon nitride (g-C3N4) fragments loaded on a Cu surface to explore the CO2RR catalytic property of the interface between g-C3N4 and the Cu surface. Three composite interfaces of C3N4/Cu(111), C3N4/Cu(110) and C3N4/Cu(100) have been studied by considering the reaction sites of vertex nitrogen atoms, edge nitrogen atoms and the nearby Cu atoms. It was found that the C3N4/Cu interfaces where nitrogen atoms contact the Cu substrate present competitive CO2RR activity. Among them, C3N4/Cu(111)-N3 exhibited a better activity for CH3OH production, with a low overpotential of 0.38 V. For HCOOH and CH4 production, C3N4/Cu(111)-Cu and C3N4/Cu(100)-N1 have overpotentials of 0.26 V and 0.44 V. The electronic analysis indicates the electron transfer from the Cu substrate to the g-C3N4 fragment and mainly accumulates on the nitrogen atoms of the interface. Such charge accumulation can activate the adsorbed CO bond of CO2 and lead to lower energetic barriers of CO2RR. DFT calculations indicate that the boundary nitrogen sites reduced the energy barrier of *CHO, which is crucial for CO2RR, compared with that of the pristine Cu surface. Our study explores a new Cu-based electrocatalyst and indicates that the C3N4/Cu interface can enhance the activities and selectivity of CO2RR and open a new strategy to design high-efficiency electrocatalysts for CO2RR.

Customizing catalyst surface/interface structures for electrochemical CO2 reduction.

Electrochemical CO2 reduction reaction (CO2RR) provides a promising route to converting CO2 into value-added chemicals and to neutralizing the greenhouse gas emission. For the industrial application of CO2RR, high-performance electrocatalysts featuring high activities and selectivities are essential. It has been demonstrated that customizing the catalyst surface/interface structures allows for high-precision control over the microenvironment for catalysis as well as the adsorption/desorption behaviors of key reaction intermediates in CO2RR, thereby elevating the activity, selectivity and stability of the electrocatalysts. In this paper, we review the progress in customizing the surface/interface structures for CO2RR electrocatalysts (including atomic-site catalysts, metal catalysts, and metal/oxide catalysts). From the perspectives of coordination engineering, atomic interface design, surface modification, and hetero-interface construction, we delineate the resulting specific alterations in surface/interface structures, and their effect on the CO2RR process. At the end of this review, we present a brief discussion and outlook on the current challenges and future directions for achieving high-efficiency CO2RR via surface/interface engineering.

Two-Dimensional Carbon Nitride as a Support of Single Metal Atom for Carbon Dioxide Reduction Reaction

Electrochemical conversion of CO2 into added-value chemicals is an important approach to recycle CO2. Heterogeneous catalysis is widely used in industrial applications because of the possibility of facile separation, which reduces the operating costs, although heterogeneous catalysts often have limited selectivity. In contrast, homogeneous catalysts are very selective although they have limited industrial applications due to their cost, the use of precious metals, and the difficulty in separating and recovering the catalysts. Currently, the research community is trying to combine the properties of homogeneous and heterogeneous catalysts. From the heterogeneous catalyst perspective, research has been focused on creating smaller and dispersed catalyst particles. Single-atom catalysts (SACs), which comprise atoms of metal species dispersed on a solid support, are expected to bridge the homogeneous and heterogeneous catalyst properties.The work described herein explores, by means of density functional simulations, the electrocatalytic CO2 reduction reaction (CO2RR) using several single transition metal atoms anchored in 2D graphitic carbon nitride (g-C3N4),1 focusing on the group XI transition metals since they include Cu, the only transition metal capable of reducing CO2 to hydrocarbons and alcohols with acceptable faradaic efficiencies. Moreover, the Cu1/g-C3N4 system has been experimentally evaluated as CO2RR electrocatalysts. 2D g-C3N4 has been demonstrated to be a competitive candidate for electrocatalytic CO2 reduction since it can act as an active support for single metal-atom catalysts, mainly Cu, Pd, and Pt, and the deposition of Au single atom was experimentally characterized.The computational hydrogen electrode model has been used to explore the suitability of several transition metals atoms anchored to C3N4, showing that single atoms enhance the catalytic activity of the system as the first proton–electron transfer is thermodynamically favored in comparison to bare carbon nitride support. Our theoretical interpretations are consistent with the experimental results using Cu1/g-C3N4,2 revealing that the competitive H2 generation is favored due to the strong CO binding energies. This fact reinforced the capability of our computational models to predict the behavior of several single metal atom electrocatalysts to reduce CO2, for instance, predicting that Au can promote the methane formation after eight electron-proton transfer processes. Our computational study paves the road to finding suitable metals that catalyze the first proton–electron transfer in the carbon dioxide reduction reaction. Posada-Pérez, A. Vidal-López, M. Solà, and A. Poater, 2023, Phys. Chem. Chem. Phys, 25, 8574.Cometto, A. Ugolotti, E. Grazietti, A. Moretto, G. Bottaro, L. Armelao, C. Di Valentin, L. Calvillo and G. A. Granozzi, npj 2D Mater. Appl., 2021, 5, 63. Figure 1

Single transition metal anchored on defective boron carbide monolayer for efficient and selective CO2 electrochemical reduction: A theoretical study

Electrochemical reduction of CO2 to produce fuels and industrial chemicals shows significant promise for reducing greenhouse gas emission and mitigation the energy crisis. The exploitation of highly efficient catalysts has long been considered an attractive yet challenging task. Herein, we systematically studied the electrocatalytic performance of a range of transition metal (TM) single atom anchored on defective BC3 monolayer, specifically those with a boron vacancy (VB) and a carbon vacancy (VC), named TM@VB and TM@VC, respectively, as single-atom catalysts (SACs) for CO2 reduction reaction (CO2RR) via density functional theory (DFT). We screened a total of 28 stable SACs by evaluating the formation energy and dissolution potential of metal atoms. Detail reaction mechanisms involved in CO2 reduction process to produce diverse C1 products were considered. Among the 28 candidates, Cu@VB, Mo@VB, Re@VB, Co@VC, and Ir@VC displayed remarkable efficiency in reducing CO2 into HCOOH at nearly zero or extremely low limiting potentials (UL) of -0.01 ∼ 0 V. These SACs exhibit excellent electrocatalytic activity, surpassing most previously reported catalysts. Furthermore, these five SACs effectively suppressed the competing hydrogen evolution reaction, highlighting their high selectivity toward HCOOH. In addition, the volcano relationship between the ∆G*HCOO and UL was established. This work may offer a promising strategy for the research and development of high-efficiency CO2RR electrocatalysts, which has potential implications for addressing environmental and energy challenges.

Instructive Synergistic Effect of Coordinating Phosphorus in Transition-Metal-Doped β-Phosphorus Carbide Guiding the Design of High-Performance CO2RR Electrocatalysts.

Developing efficient electrocatalysts for the CO2 reduction reaction (CO2RR) is the key and difficult point to alleviate energy and climate issues. The synergistic catalytic effects between metal and nonmetal elements have gained attention for the design of the CO2RR electrocatalysts. The realization of this effect requires a suitable combination of metal and nonmetal elements, as well as the support of suitable substrates. Based on this, the transition-metal-doped β-phosphorus carbide (TM-PC) (TM = 4d and 5d transition metals except Tc) catalysts are designed, and their structures, electronic properties, and CO2RR catalytic performances are studied in depth via first-principle calculations. The strong bonding ability and high reactivity brought by the moderate electronegativity and abundant electrons and orbitals of phosphorus are the key to the excellent catalytic performance of TM-PCs. Coordinating phosphorus atoms improve the catalyst activity in two ways: (1) regulating the electron transfer of the TM active site, and (2) acting as the active site and changing the reaction mechanism. With the participation of coordinating P atoms, the "relay" of active sites reduces the limiting potential values for the reduction from CO2 to CH4 catalyzed by Cr-PC and Mo-PC by 0.27 and 0.23 V, respectively, compared with pathways where only the TM atom is the active site, reaching -0.55 and -0.63 V, respectively. Regarding the coordinating P atom as the second active site, Cr-PC and Mo-PC can catalyze the production of CH3CH2OH at limiting potential values of -0.54 and -0.67 V, respectively. This study demonstrates the dramatic enhancement of catalytic activity caused by suitable nonmetal coordinating atoms such as P and provides a reference for the design of high-performance CO2RR electrocatalysts based on metal-nonmetal coordinating active centers.

Machine-Learning assisted screening of double metal catalysts for CO2 electroreduction to CH4

Electrochemical CO2 reduction reaction (CO2RR) has become a promising application in addressing energy challenges and environmental crises. However, the scaling relationship between the reaction intermediates constrains the successful deep reduction of CO2. Dual-metal-site catalysts (DMSCs) have emerged as potential electrocatalysts for CO2RR by breaking the scaling relationship due to their more adaptable active sites. Herein, this study aims to investigate the correlation between the adsorption energies of essential intermediates in CO2RR catalysis with double transition metal atoms anchored on graphdiyne monolayer (TM1-TM2@GDY) through machine-learning (ML) assisted density functional theory (DFT) calculations. The results reveal the important descriptors of CO2RR catalyzed by TM1-TM2@GDY, and demonstrate that the heteronuclear TM1-TM2@GDY have great potential for deep CO2 reduction. Especially, Co-Mo@GDY and Co-W@GDY show low limiting potential (-0.60 V and −0.39 V, respectively) and high selectivity on the reaction from CO2 to CH4 based on the free energy diagrams. This study indicates that the two TM atoms on GDY act cooperatively for the catalysis of CO2RR. Notably, utilizing ML eliminates the need to calculate all transition metal combinations by DFT, which is a great boost in quickly investigating catalytic performance and high screening for excellent catalysts.

Facile synthesis of single‐nickel‐atomic dispersed mesoporous carbon nanosheets with controllable nitrogen doping for efficient electrochemical CO2 reduction

AbstractThe catalytic conversion of CO2 into high value‐added chemical products driven by electricity was an effective strategy to reduce atmospheric CO2 concentration. The development of high efficiency catalysts had always been the core for electrocatalytic reduction of CO2. The single transition metal sites anchored on nitrogen‐doped carbon showed great potential in CO2 reduction reaction (CO2RR). In this paper, the atomically dispersed Ni−N sites are constructed on the two‐dimensional mesoporous carbon nanosheets by the secondary pyrolysis method. The rich mesoporous structure of the two‐dimensional nanosheets is beneficial to CO2 diffusion and adsorption during CO2RR, and the high nitrogen contents could increase the Ni single atom loadings. The nitrogen content and type could be controlled by regulating the ratio of nitrogen source to carbon source, and the catalyst activity is improved as the proportion of nitrogen sources increases. When the ratio of nitrogen source to carbon source is four, the oxidation state of Ni single atoms Ni@NMCN4 is between 0 and +2, and Ni single atoms exists as Ni−N4 structure with pyridinic N of 32.78 %, which exhibits the best electrochemical CO2RR activity. The active site of Ni@NMCN4 is confirmed as the highly stable Ni single atoms. Moreover, the pyridinic N species are proved to play an important role in enhancing the CO2 electroreduction performance. This work provides a new perspective to adjust the nitrogen content and type in transition metal monatomic‐N‐doped carbon electrocatalysts for CO2RR.

Efficient CO2 reduction for CO production using triatomic catalyst screening: A DFT study

The electrochemical reduction of CO2 to produce CO has garnered significant interest in recent years. Despite the significant progress made, efficient electrocatalysts for CO2 Reduction Reaction are still lacking. On the basis of the SACs, the TACs expands the multi-active sites and improves the catalytic performance. In this work, we conduct a theoretical screening of transition metal TACs on graphdiyne (TM1TM2TM3@GY, TM = Mn, Fe, Co, Ni, Cu, and Mo) and systematically investigate their catalytic activity. The results reveal that MnMoCu@GY exhibits superior catalytic performance for CO2RR-to-CO, with a low limiting potential of −0.36 eV, as evidenced by adsorption configurations and electronic structure analyses. Furthermore, MnMoCu@GY significantly inhibits the competitive hydrogen evolution reaction. We also find that the d-band center and band gap, as well as the redistribution of charge, play a critical role in determining the energy of intermediates, and consequently, the activity and selectivity of TACs in CO2RR. Our theoretical study not only further extends the TACs, but also opens a new door to boost the sustainable CO2 conversion.

Boosting the CO2 electroreduction performance of La2-xAgxCuO4-δ perovskites via A-site substitution mechanism

The electrochemical CO2 reduction reaction (CO2RR) has been widely recognized as a promising approach to achieve the carbon cycle balance in human society. However, potent electrocatalysts are required to achieve the selective conversion of CO2 to high value-added chemical products. Here, we reported a Ruddlesden-Popper layered perovskite catalyst, namely La2-xAgxCuO4-δ, which exhibits enhanced activity and selectivity towards CO2RR by tuning the A-site cations with Ag doping. Combinatorial characterizations and theoretical calculation reveal the partial replacement of Ag+ on the A-site of La2CuO4 can tune the electronic structure of Cu2+ ions of the B site, improving the adsorption/activation of crucial reaction intermediates. Importantly, Ag doping constructs oxygen vacancies, which shifts the reaction pathways from the two-electron transfer reduction to the multi-electron/proton transfer reduction, thereby promoting the formation of multi-carbon products. Taken together, these findings offer fresh insights for the strategic development of efficient perovskite electrocatalysts for CO2RR.

CO2 Electrochemical reduction on the two dimensional transition metal coordinated by 2,3,6,7,10,11-triphenylenehexathiol and 2,3,6,7,10,11-triphenylenehexamine, a computational survey

ABSTRACT Electrochemical CO2 reduction reaction (CO2RR) provides a feasible technology for alleviating global warming, energy crisis and sustainable energy production. In this work, CO2RR reaction mechanism on TM-THTA (TM = Fe, Co, Ni, Ru, Rh, Pd, THTA is composed by two types of building blocks of 2,3,6,7,10,11-triphenylenehexathiol and 2,3,6,7,10,11-triphenylenehexamine) has been studied by using density functional method. Our study showed that the studied catalysts are stable both thermodynamically and electrochemically. Rh-THTA is a good CO2 reduction catalyst in producing CH4. Pd-THTA is a potential CO2 reduction catalyst in producing HCOOH. Solvent effect plays important role in reaction mechanism. The strong hydrogen evolution reaction in Rh-THTA and Pd-THTA can be refrained by adjusting the pH values of electrolyte. We hope this study could provide a useful way to develop 2D-MOF-based CO2RR electrocatalysts.