Co-amorphous Salt Research Articles

Designing a Novel Coamorphous Salt Formulation of Telmisartan with Amlodipine to Enhance Permeability and Oral Absorption.

Coamorphous formulation is a useful approach for enhancing the solubility of poorly water-soluble drugs via intermolecular interactions. In this study, a hydrogen-bonding-based coamorphous system was developed to improve drug solubility, but it barely changed the apparent permeability (Papp) of the drug. This study aimed to design a novel coamorphous salt using ionic interactions to improve drug permeability and absorption. Telmisartan (TMS), with an acidic group, was used to form a coamorphous salt with basic amlodipine (AML). Evaluation of the physicochemical properties confirmed the formation of a coamorphous salt via ionic interactions between the amine group of AML and the carboxyl group of TMS at a molar ratio of 1:1. The coamorphous salt of TMS/AML enhanced the partitioning of both drugs into octanol, indicating increased lipophilicity owing to the interaction between TMS and AML. The coamorphous salt dramatically enhanced TMS solubility (99.8 times that of untreated TMS) and decreased AML solubility owing to the interaction between TMS and AML. Although the coamorphous salt showed a decreased Papp in the permeation study in the presence of a thicker unstirred water layer (UWL) without stirring, Papp increased in the presence of a thinner UWL with stirring. The oral absorption of TMS from the coamorphous salt increased by up to 4.1 times compared to that of untreated TMS, whereas that of AML remained unchanged. Although the coamorphous salt with increased lipophilicity has a disadvantage in terms of diffusion through the UWL, the UWL is thin in human/animal bodies owing to the peristaltic action of the digestive tract. Dissociation of the coamorphous salt on the membrane surface could contribute to the partitioning of the neutral form of drugs to the membrane cells compared with untreated drugs. As a result, coamorphous salt formation has the advantage of improving the membrane permeation and oral absorption of TMS, owing to the enhanced solubility and supply of membrane-permeable free TMS on the surface of the membrane.

Diversity of Solid Forms Promoted by Ball Milling: Characterization and Intrinsic Dissolution Studies of Pioglitazone Hydrochloride and Fluvastatin Sodium Drug-Drug Systems.

Coamorphous salt in a 1:1 ratio prepared by ball milling from Fluvastatin sodium (FLV) and Pioglitazone hydrochloride (PGZ·HCl) can be selectively formed by neat grinding (NG). Furthermore, the salt-cocrystal continuum was preferably formed by employing liquid-assisted grinding (LAG) using ethanol (EtOH). Attempts to prepare the coamorphous salt starting from the salt-cocrystal continuum by NG were unsuccessful. Interestingly, through ball milling by NG or LAG, a great diversity of solid forms (PGZ·HCl-FLV 1:1) could be accessed: NG and hexane (coamorphous); ethyl acetate (physical mixture); EtOH (salt-cocrystal continuum); and water (which presents two Tg, indicating immiscibility of the components). An exploration was performed at different drug-to-drug ratios by NG. By differential scanning calorimetry (DSC), the presence of two endothermic events was observed in this screening: incongruous melting point (solidus) and excess of one of the components (liquidus), except in the 1:1 solid form. From these results, eutectic behavior was observed. Through the construction of a binary phase diagram, it was determined that the 1:1 molar ratio gives rise to the formation of the most stable coamorphous composition. Dissolution profile studies of these solid forms were carried out, specifically on pure FLV and the solid forms of PGZ⋅HCl-FLV (1:2; 1:4; and 1:6), together with the coamorphous 1:1 salt. By itself, pure FLV presented the highest Kint (13.6270 ± 0.8127 mg/cm2⋅min). On the other hand, the coamorphous 1:1 showed a very low Kint (0.0220 ± 0.0014 mg/cm2·min), indicating very fast recrystallization by the FLV, which avoids observing a sudden release of this drug in the solution. This same behavior was observed in the eutectic composition 1:2. In the other solid forms, the value of Kint increases along with the %w of FLV. From the mechanochemical point of view, ball milling by NG or LAG became an important synthetic tool since it allows obtaining a great variety of solid forms to explore the solid-state reactivity of the drug-drug solid-form PGZ HCl-FLV.

Ball-Milling Preparation of the Drug-Drug Solid Form of Pioglitazone-Rosuvastatin at Different Molar Ratios: Characterization and Intrinsic Dissolution Rates Evaluation.

Ball-milling using neat grinding (NG) or liquid-assisted grinding (LAG) by varying the polarity of the solvents allowed access to various drug-drug solid forms of pioglitazone hydrochloride (PGZ·HCl) and rosuvastatin calcium (RSV). Using NG, the coamorphous form was formed from the reaction of pioglitazone hydrochloride (PGZ·HCl) and rosuvastatin calcium (RSV) in a 2:1 molar ratio. The formation of the expected coamorphous salt could not be corroborated by FT-IR, but DSC data showed that it was indeed a single-phase amorphous mixture. By varying the molar ratios of the reactants, either keeping PGZ·HCl constant and varying RSV or vice versa, another coamorphous form was obtained when a 1:1 molar ratio was employed. In the case of the other outcomes, it was observed that they were a mixture of solid forms coexisting simultaneously with the coamorphous forms (1:1 or 2:1) together with the drug that was in excess. When RSV was in excess, it was in an amorphous form. In the case of PGZ·HCl, it was found in a semicrystalline form. The intrinsic dissolution rates (IDRs) of the solid forms of PGZ·HCl-RSV in stoichiometric ratios (1:1, 2:1, 1:4, 6:1, and 1:10) were evaluated. Interestingly, a synchronized release of both drugs in the dissolution medium was observed. In the case of the release of RSV, there were no improvements in the dissolution profiles, because the acidic media caused the formation of degradation products, limiting any probable modification in the dissolution processes. However, the coamorphous 2:1 form exhibited an improvement of 1.03 times with respect to pure PGZ·HCl. It is proposed that the modification of the dissolution process of the coamorphous 2:1 form was limited by changes in the pH of the media as RSV consumes protons from the media due to degradation processes.

Norfloxacin co-amorphous salt systems: Effects of molecular descriptors on the formation and physical stability of co-amorphous systems

Amorphization technology has been a promising strategy to improve the solubility and dissolution of drugs. This study aims to prepare norfloxacin (NFX) co-amorphous (CA) systems and evaluate the association between molecular descriptors and the formation and physical stability of NFX CAs. The molecular miscibility between NFX and 17 co-former candidates was firstly predicted using Hansen solubility parameters (HSPs) and six NFX CAs were successfully prepared by dry ball mill. Compared with crystalline NFX, four NFX CAs showed enhanced solubility (up to 2.50-fold) and dissolution rates. NFX CAs exhibited excellent physical stability under dry conditions. According to the quantitative calculations of Pearson correlation coefficient and Ridge regression, molecular descriptors have a great effect on NFX CA formation with structural parameters (Weight, VDW_vol, VDW_area, Rings) stronger than miscibility parameter Δ δ¯ and pKa. These molecular descriptors corresponding to π···π interactions, molecular miscibility and ionic interactions are also responsible for physical stability. The results demonstrate that NFX CA can be stably formed if the co-former has more rings, smaller Δ δ¯ (less than or close to 5 MPa0.5) and larger ΔpKa. This study offers a potential strategy to screen and design a CA system using multivariate data analysis based on theoretical considerations of molecular descriptors.

Co-Amorphous Formulations of Furosemide with Arginine and P-Glycoprotein Inhibitor Drugs.

In this study, the amino acid arginine (ARG) and P-glycoprotein (P-gp) inhibitors verapamil hydrochloride (VER), piperine (PIP) and quercetin (QRT) were used as co-formers for co-amorphous mixtures of a Biopharmaceutics classification system (BCS) class IV drug, furosemide (FUR). FUR mixtures with VER, PIP and QRT were prepared by solvent evaporation, and mixtures with ARG were prepared by spray drying in 1:1 and 1:2 molar ratios. The solid-state properties of the mixtures were characterized with X-ray powder diffraction (XRPD), Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) in stability studies under different storage conditions. Simultaneous dissolution/permeation studies were conducted in side-by-side diffusion cells with a PAMPA (parallel artificial membrane permeability assay) membrane as a permeation barrier. It was observed with XRPD that ARG, VER and PIP formed co-amorphous mixtures with FUR at both molar ratios. DSC and FTIR revealed single glass transition values for the mixtures (except for FUR:VER 1:2), with the formation of intermolecular interactions between the components, especially salt formation between FUR and ARG. The co-amorphous mixtures were found to be stable for at least two months under an elevated temperature/humidity, except FUR:ARG 1:2, which was sensitive to humidity. The dissolution/permeation studies showed that only the co-amorphous FUR:ARG mixtures were able to enhance both the dissolution and permeation of FUR. Thus, it is concluded that formulating co-amorphous salts with ARG may be a promising option for poorly soluble/permeable FUR.

Generation of High Dose Inhalable Effervescent Dispersions against Pseudomonas aeruginosa Biofilms

PurposeNovel particle engineering approach was used in this study to generate high dose inhalable effervescent particles with synergistic effects against Pseudomonas aeruginosa biofilms.MethodsSpray dried co-amorphous salt of ciprofloxacin (CFX) and tartaric acid (TA) was prepared and coated with external layer of sodium bicarbonate and silica coated silver nanobeads. Design of experiments (DOE) was used to optimize physicochemical properties of particles for enhanced lung deposition.ResultsGenerated particles were co-amorphous CFX/TA showing that CFX lost its zwitterionic form and exhibiting distinct properties to CFX/HCl as assessed by FTIR and thermal analysis. Particles exhibited mass mean aerodynamic diameter (MMAD) of 3.3 μm, emitted dose of 78% and fine particle dose of 85%. Particles were further evaluated via antimicrobial assessment of minimum inhibitory concentrations (MIC) and minimum biofilm eradication concentration (MBEC). MIC and MBEC results showed that the hybrid particles were around 3–5 times more effective when compared to CFX signifying that synergistic effect was achieved. Diffusing wave spectroscopy results showed that the silver containing particles had a disruptive effect on rheological properties as opposed to silver free particles.ConclusionsOverall, these results showed the potential to use particle engineering to generate particles that are highly disruptive of bacterial biofilms.

Spray-drying of inhalable, multifunctional formulations for the treatment of biofilms formed in cystic fibrosis

Cystic fibrosis (CF) is a serious lung disease, commonly susceptible to Pseudomonas aeruginosa colonization. The dense mucus together with biofilm formation limit drug permeability and prevent the drug from reaching the site of action, causing treatment failure of the bacterial infection. Besides the use of antibiotics, the mucolytic agent N-acetylcysteine (NAC) is recommended to be co-administered in the treatment of CF. Although several formulations have been developed for inhalation therapy to improve the pulmonary condition in CF patients, there is still no comprehensive study on a combined multifunctional dry powder formulation of antibiotics with NAC. In this work, we developed an innovative multifunctional dry powder inhaler (DPI) formulation based on salt formation between NAC and antibiotics and characterized their solid state properties and physical stability. NAC could be spray dried together with three different antibiotics, azithromycin (Azi), tobramycin (Tobra) and ciprofloxacin (Cipro), without the use of organic solvents to form Azi/NAC, Tobra/NAC and Cipro/NAC DPI formulations. Solid-state characterization of these DPI formulations showed that they were amorphous after spray drying. Azi/NAC and Tobra/NAC form co-amorphous salt systems that were physically stable under storage at stress conditions. For particle characterization, the obtained mass median aerodynamic diameters were in a suitable range for inhalation (< 5.0μm). The multifunctional antibiotic/NAC formulations conserved or improved the antibiotic susceptibility and showed promising results regarding the inhibition of P. aeruginosa PA14 biofilm formation.

Influence of preparation technique on co-amorphization of carvedilol with acidic amino acids

Basic amino acids (AAs) have successfully been used as co-formers with acidic drugs for the preparation of co-amorphous formulations using ball-milling (BM) and spray-drying (SD). In contrast, acidic AAs have been reported as poor co-formers for co-amorphous formulations, even for basic drugs, when using BM as a preparation technique. In this study the basic drug carvedilol (CAR) and the two acidic AAs, glutamic acid and aspartic acid, were used to explore the possibilities of producing co-amorphous formulations using BM, SD and liquid assisted grinding (LAG). X-ray powder diffraction, thermal analysis and Fourier-transform infrared spectroscopy were used to determine the solid state form of the various CAR-AA mixtures prepared. BM the CAR-AA mixtures for 60 min did not result in co-amorphization as XRPD revealed remaining crystallinity of both CAR and the AA. On the other hand, successful co-amorphous salt formation was obtained for all SD samples. Differential scanning calorimetry showed that all the SD CAR-AA mixtures had a single glass transition temperature of approximately 80 °C. The CAR-AA mixtures prepared by LAG showed some polymorphic conversion of CAR. Intrinsic dissolution testing showed the highest dissolution rate for all SD mixtures due to co-amorphous salt formation. Hence it was observed that of the three preparation techniques used, successful co-amorphous formulations of a basic drug with an acidic AA could only be prepared by SD.

In vitro and in vivo comparison between crystalline and co-amorphous salts of naproxen-arginine

Liquid-assisted grinding (LAG) and dry ball milling (DBM) have recently been used to obtain different physical forms of drug-amino acid salts with promising dissolution and physical stability properties. In this work, crystalline and co-amorphous naproxen-arginine mixtures were prepared using LAG and DBM, respectively, and compared with regard to their in vitro and in vivo performance. X-ray powder diffraction and Fourier-transformed infrared spectroscopy showed that LAG led to the formation of a crystalline salt, while DBM led to a co-amorphous salt. These results agreed with the differential scanning calorimetry profiles: a melting point of 230 °C was determined for the crystalline salt, while the co-amorphous formulation showed a single glass transition temperature at approx. 92 °C. Both solid state forms of the salt showed increased intrinsic dissolution rates (14.8 and 74.1-fold, respectively) and also higher solubility (25.3 and 29.8-fold, respectively) compared to the pure crystalline drug in vitro. Subsequently, the co-amorphous salt revealed an improved bioavailability in a pharmacokinetic study, showing a 1.5-fold increase in AUC0-t and a 2.15-fold increase in cmax compared to the pure crystalline drug. In contrast, even though showing a better in vitro performance, the crystalline salt interestingly did not show an increase in bioavailability in comparison to pure crystalline naproxen.

Preparation and characterization of multi-component tablets containing co-amorphous salts: Combining multimodal non-linear optical imaging with established analytical methods

Co-amorphous mixtures have rarely been formulated as oral dosage forms, even though they have been shown to stabilize amorphous drugs in the solid state and enhance the dissolution properties of poorly soluble drugs.In the present study we formulated tablets consisting of either spray dried co-amorphous ibuprofen-arginine or indomethacin-arginine, mannitol or xylitol and polyvinylpyrrolidone K30 (PVP). Experimental design was used for the selection of tablet compositions, and the effect of tablet composition on tablet characteristics was modelled. Multimodal non-linear imaging, including coherent anti-Stokes Raman scattering (CARS) and sum frequency/second harmonic generation (SFG/SHG) microscopies, as well as scanning electron microscopy, X-ray diffractometry and Fourier-transform infrared spectroscopy were utilized to characterize the tablets.The tablets possessed sufficient strength, but modelling produced no clear evidence about the compaction characteristics of co-amorphous salts. However, co-amorphous drug-arginine mixtures resulted in enhanced dissolution behaviour, and the PVP in the tableting mixture stabilized the supersaturation. The co-amorphous mixtures were physically stable during compaction, but the excipient selection affected the long term stability of the ibuprofen-arginine mixture. CARS and SFG/SHG proved feasible techniques in imaging the component distribution on the tablet surfaces, but possibly due to the limited imaging area, recrystallization detected with x-ray diffraction was not detected.

Organic acids as co-formers for co-amorphous systems – Influence of variation in molar ratio on the physicochemical properties of the co-amorphous systems

Co-amorphous drug delivery systems are attracting increasing attention in the pharmaceutical field, due to their promising potential to improve the solubility and bioavailability of poorly water-soluble drugs. In this study, three organic acids, namely benzoic acid, malic acid and citric acid, were investigated as co-formers for the weakly basic drug carvedilol. It was hypothesised that the mono-, di- and triprotic nature of the organic acids could result in co-amorphous salt formation with carvedilol at the respective stoichiometric molar ratios, leading to different physicochemical properties of the co-amorphous samples. The carvedilol-organic acid samples were spray dried at molar ratios from 1:4 to 4:1 and amorphous products were obtained for all mixtures except for carvedilol-benzoic acid at a molar ratio of 1:4. A positive deviation of the glass transition temperature compared to the Gordon-Taylor equation was seen for all co-amorphous samples. Salt formation was confirmed by FTIR, but interestingly complete salt formation did not simply follow the molar ratio of the number of basic and acidic groups, most likely due to steric hindrance. As more than one molecule of carvedilol was found to be involved in most co-amorphous systems with the organic acids, this approach allows for a higher “drug loading” compared to other co-formers that usually form co-amorphous systems at a 1:1 M ratio. In addition, the large number of available organic acids offers various options for selecting co-formers.

A Novel Desloratadine-Benzoic Acid Co-Amorphous Solid: Preparation, Characterization, and Stability Evaluation.

Low physical stability is the limitation of the widespread use of amorphous drugs. The co-amorphous drug system is a new and emerging method for preparing a stable amorphous form. Co-amorphous is a single-phase amorphous multicomponent system consisting of two or more small molecules that are a combination of drugs or drugs and excipients. The co-amorphous system that uses benzoic acid (BA) as an excipient was studied to improve the physical stability, dissolution, and solubility of desloratadine (DES). In this study, the co-amorphous formation of DES and BA (DES–BA) was prepared by melt-quenching method and characterized by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), and polarized light microscopy (PLM). Dissolution, solubility, and physical stability profiles of DES–BA were determined. The DES crystals were converted into DES–BA co-amorphous form to reveal the molecular interactions between DES and BA. Solid-state analysis proved that the co-amorphous DES–BA system (1:1) is amorphous and homogeneous. The DSC experiment showed that the glass transition temperature (Tg) of tested DES–BA co-amorphous had a higher single Tg compared to the amorphous DES. FTIR revealed strong interactions, especially salt formation. The dissolution rate and solubility of co-amorphous DES–BA (1:1) obtained were larger than the DES in crystalline form. The PXRD technique was used to assess physical stability for three months at 40 °C with 75% RH. The DES–BA co-amorphous system demonstrated better physical stability than a single form of amorphous DES. Co-amorphous DES–BA has demonstrated the potential for improving solid-state stability, as the formation of DES–BA co-amorphous salt increased solubility and dissolution when compared to pure crystalline DES. This study also demonstrated the possibility for developing a DES–BA co-amorphous system toward oral formulations to improve DES solubility and bioavailability.

Undesired co-amorphisation of indomethacin and arginine during combined storage at high humidity conditions

The use of co-amorphous systems for solubility enhancement of poorly water-soluble drugs has recently gained interest in the field of pharmaceutical technology. However, undesired co-amorphisation of a drug may lead to an alteration of the performance of the drug product, e.g. the previously observed co-amorphisation of indomethacin and arginine upon storage of tablets containing both components in an initially crystalline form at room temperature (RT) and 75% relative humidity (RH). Therefore, the aim of the present study was to further investigate this unintended co-amorphisation by storing plain crystalline γ-indomethacin and arginine as well as physical mixtures of both components at RT and three different RH levels (28, 58, and 75% RH). After storage for up to 101 days, their properties were analysed by X-ray powder diffraction, infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and HPLC. Results showed that the solid state of plain γ-indomethacin did not change during storage at all three storage conditions. In contrast, arginine was found to form a dihydrate upon storage at RT/58% RH and RT/75% RH. The physical mixtures, stored at RT/28% RH and RT/58% RH, remained crystalline and were chemically stable, while the formation of a co-amorphous salt between indomethacin and arginine as well as basic hydrolysis of indomethacin started already 1 day after exposure to RT/75% RH. Moreover, formation of a crystalline salt of indomethacin and arginine upon storage at RT/75% RH was observed. As neither of these instabilities occurred, if indomethacin was stored separately, the simultaneous effects of arginine and moisture on the solid state properties and chemical stability of indomethacin should be taken into account, if selecting arginine as excipient.

On the role of salt formation and structural similarity of co-formers in co-amorphous drug delivery systems

Co-amorphous drug delivery systems based on amino acids as co-formers have shown promising potential to improve the solubility and bioavailability of poorly water-soluble drugs. Potential salt formation is assumed to be a key molecular interaction responsible for amorphous stability and increased solubility. However, little is known about the importance of the overall structure of the co-former. In this study, the structurally related amino acids arginine (basic) and citrulline (neutral) were chosen together with four model drugs (acidic furosemide and nitrofurantoin; basic cimetidine and mebendazole) to investigate the importance of salt formation versus structural similarity of co-formers. Drug-amino acid mixtures were ball milled at a molar ratio of 1:1. Generally, arginine showed a higher tendency to successfully form co-amorphous systems with the model drugs compared with citrulline, irrespective of assumed salt formation. Salt forming mixtures showed much higher Tgs, faster dissolution rates, higher solubility and physical stability compared to the corresponding non-salt forming mixtures. In conclusion, structural similarity of the co-formers does not lead to similar co-former performance for a given drug. Salt formation is not a prerequisite for the formation of a co-amorphous system, but if a co-amorphous salt system is formed, improved dissolution rate and physical stability are observed.

Performance comparison between crystalline and co-amorphous salts of indomethacin-lysine

The introduction of a highly water soluble amino acid as co-amorphous co-former has previously been shown to significantly improve the dissolution rate of poorly water soluble drugs. In this work, dry ball milling (DBM) and liquid assisted grinding (LAG) were used to prepare different physical forms of salts of indomethacin (IND) with the amino acid lysine (LYS), allowing the direct comparison of their solid-state properties to their in vitro performance. X-ray powder diffraction and Fourier-transformed infrared spectroscopy showed that DBM experiments led to the formation of a fully co-amorphous salt, while LAG resulted in a crystalline salt. Differential scanning calorimetry showed that the samples prepared by DBM had a single glass transition temperature (Tg) of approx. 100°C for the co-amorphous salt, while a new melting point (223°C) was obtained for the crystalline salt prepared by LAG. Intrinsic dissolution and powder dissolution studies demonstrated an increased dissolution rate of the drug in the co-amorphous salt compared to pure amorphous IND and also the crystalline drug-LYS salt. Furthermore, the co-amorphous IND-LYS salt presented long term physical stability in dry conditions at 25°C and 40°C. Overall, it has been shown that the co-amorphous form of a salt has a superior performance in comparison to a crystalline salt.

Spray drying of poorly soluble drugs from aqueous arginine solution

Co-amorphous drug-amino acid mixtures have shown potential for improving the solid-state stability and dissolution behavior of amorphous drugs. In previous studies, however these mixtures have been produced mainly with small-scale preparation methods, or with methods that have required the use of organic solvents or other dissolution enhancers. In the present study, co-amorphous ibuprofen-arginine and indomethacin-arginine mixtures were spray dried from water. The mixtures were prepared at two drug-arginine molar ratios (1:1 and 1:2). The properties of the prepared mixtures were investigated with differential scanning calorimetry, X-ray powder diffractometry, Fourier-transform infrared spectroscopy and a 24h, non-sink, dissolution study. All mixtures exhibited a single glass transition temperature (Tg), evidence of the formation of homogenous single-phase systems. Fourier transform infrared spectroscopy revealed strong interactions (mainly salt formation) that account for the positive deviation between measured and estimated Tg values. No crystallization was observed during a 1-year stability study in either 1:1 or 1:2 mixtures, but in the presence of moisture, handling difficulties were encountered. The formation of co-amorphous salts led to improved dissolution characteristics when compared to the corresponding physical mixtures or to pure crystalline drugs.

Influence of variation in molar ratio on co-amorphous drug-amino acid systems

Molecular interactions were investigated within four different co-amorphous drug-amino acid systems, namely indomethacin–tryptophan (Ind–Trp), furosemide–tryptophan (Fur–Trp), indomethacin-arginine (Ind-Arg) and furosemide-arginine (Fur-Arg). The co-amorphous systems were prepared by ball milling for 90min at different molar ratios and analyzed by XRPD and DSC. Interactions within the co-amorphous samples were evaluated based on the deviation between the actual glass transition temperature (Tg) and the theoretical Tg calculated by the Gordon-Taylor equation. The strongest interactions were observed in the 50mol% drug (1:1M ratio) mixtures, with the exception of co-amorphous Ind-Arg where the interactions within the 40mol% drug samples appear equally strong. A particularly large deviation between the theoretical and actual Tgs was observed within co-amorphous Ind-Arg and Fur-Arg systems. Further analysis of these co-amorphous systems by 13C solid-state NMR (ssNMR) and FTIR confirmed that Ind and Fur formed a co-amorphous salt together with Arg. A modified approach of using the Gordon-Taylor equation was applied, using the equimolar co-amorphous mixture as one component, to describe the evolution of the Tgs with varying molar ratio between the drug and the amino acid. The actual Tgs for co-amorphous Ind-Trp, Fur-Trp and Fur-Arg were correctly described by this equation, confirming the assumption that the excess component was amorphous forming a homogeneous single component within the co-amorphous mixture without additional interactions. The modified equation described the Tgs of the co-amorphous Ind-Arg with excess Arg less well indicating possible further interactions; however, the FTIR and ssNMR data did not support the presence of additional intermolecular drug-amino acid interactions.

Preparation and characterization of spray-dried co-amorphous drug-amino acid salts.

Recently, co-amorphous drug-amino acid mixtures were introduced as a promising alternative to other amorphous stabilization approaches such as the use of polymers to form glass solutions. So far, these co-amorphous mixtures have been mainly prepared via vibrational ball milling on a lab scale. In this study, spray-drying was investigated as a scale up preparation method for co-amorphous indomethacin (IND)-amino acid mixtures. In addition, the physico-chemical properties of the different co-amorphous systems were investigated with respect to the amino acids' ability towards co-amorphous salt formation. The mixtures were characterized for their solid state properties using differential scanning calorimetry, thermogravimetric analysis and X-ray powder diffraction. Fourier-transform infrared spectroscopy was used to analyze molecular interactions. Furthermore, intrinsic dissolution behaviour, and physical stability at various storage conditions, were examined. Results showed that IND could be converted into an amorphous form in combination with the amino acids arginine (ARG), histidine (HIS) and lysine (LYS) by spray-drying. Solid state characterization revealed elevated glass transition temperatures for all mixtures compared with the pure amorphous drug due to co-amorphization with the amino acids. Furthermore, strong intermolecular interactions in the form of salt/partial salt formation between the drug and amino acids were seen for all blends. All mixtures were physically stable (>10 months) at room temperature and 40°C under dry conditions. Intrinsic dissolution of the co-amorphous mixtures showed an improved dissolution behaviour under intestinal pH conditions for IND-ARG compared with the crystalline and amorphous forms of the drug. On the other hand, IND-LYS and IND-HIS revealed no significant improvement in the intrinsic dissolution rate of IND due to recrystallization of IND during dissolution. It could be shown that strong intermolecular interactions between drug and co-amorphous coformer that persist during the dissolution are crucial to prevent recrystallization and to enhance dissolution of a co-amorphous formulation.

Solid-state properties and dissolution behaviour of tablets containing co-amorphous indomethacin–arginine

Co-amorphous drug formulations provide the possibility to stabilize a drug in its amorphous form by interactions with low molecular weight compounds, e.g. amino acids. Recent studies have shown the feasibility of spray drying as a technique to manufacture co-amorphous indomethacin–arginine in a larger production scale. In this work, a tablet formulation was developed for a co-amorphous salt, namely spray dried indomethacin–arginine (SD IND–ARG). The effects of compaction pressure on tablet properties, physical stability and dissolution profiles under non-sink conditions were examined. Dissolution profiles of tablets with SD IND–ARG (TAB SD IND–ARG) were compared to those of tablets containing a physical mixture of crystalline IND and ARG (TAB PM IND–ARG) and to the dissolution of pure spray dried powder.Concerning tableting, the developed formulation allowed for the preparation of tablets with a broad range of compaction pressures resulting in different porosities and tensile strengths. XRPD results showed that, overall, no crystallization occurred neither during tableting nor during long-term storage. Dissolution profiles of TAB SD IND–ARG showed an immediate release of IND by erosion. The solubility of crystalline IND was exceeded by a factor of about 4, which was accompanied by a slow crystallization. For TAB PM IND–ARG, an in situ amorphization of IND in the presence of ARG was observed. As a result, a supersaturation was obtained, too, followed by a faster crystallization compared to TAB SD IND–ARG. In conclusion, the AUC24h of TAB SD IND–ARG was twofold higher than the AUC24h of TAB PM IND–ARG. Interestingly, different plateaus were obtained for TAB SD IND–ARG, TAB PM IND–ARG and pure SD IND–ARG after 24h dissolution, which could be explained by the formation of different polymorphic forms of indomethacin.