Clinical Nasopharyngeal Swab Samples Research Articles

CRISPR dual enzyme cleavage triggers DNA and RNA substrate cleavage for SARS-CoV-2 dual gene detection.

The widespread dissemination of coronavirus 2019 imposes a significant burden on society. Therefore, rapid detection facilitates the reduction of transmission risk. In this study, we proposed a multiplex diagnostic platform for the rapid, ultrasensitive, visual, and simultaneous detection of the severe acute respiratory syndromecoronavirus 2(SARS-CoV-2) open reading frame 1ab (ORF1ab) and N genes. A visual diagnostic method was developed using a clustered regularly interspaced short palindromic repeat (CRISPR)-Cas12a/Cas13a dual-enzyme digestion system integrated with multiplex reverse transcriptase-recombinase polymerase amplification (RT-RPA). Two CRISPR-Cas proteins (Cas12a and Cas13a) were introduced into the system to recognize and cleave the N gene and ORF1ab gene, respectively. We used fluorescent or CRISPR double digestion test strips to detect the digested products, with the N gene corresponding to the FAM channel in the PCR instrument or the T1 line on the test strip, and the ORF1ab gene corresponding to the ROX channel in the PCR instrument or the T2 line on the test strip. The analysis can be completed in less than 20 min. Meanwhile, we assessed the application of the platform and determined a sensitivity of up to 200 copies/mL. Additionally, dual gene validation in 105 clinical nasopharyngeal swab samples showed a 100% positive predictive value agreement and a 95.7% negative predictive value agreement between our method and quantitative reverse transcription-polymerase chain reaction. Overall, our method offered a novel insight into the rapid diagnosis of SARS-CoV-2.

CoLAMP: CRISPR-based one-pot loop-mediated isothermal amplification enables at-home diagnosis of SARS-CoV-2 RNA with nearly eliminated contamination utilizing amplicons depletion strategy

Rapid point-of-care diagnostics, essential in settings such as airport on-site testing and home-based screening, displayed important implications for infectious disease control during the SARS-CoV-2 outbreak. However, the deployment of simple and sensitive assays in real-life scenarios still faces the concern of aerosol contamination. Here, we report an amplicon-depleting CRISPR-based one-pot loop-mediated isothermal amplification (CoLAMP) assay for point-of-care diagnosis of SARS-CoV-2 RNA. In this work, AapCas12b sgRNA is designed to recognize the activator sequence sited in the loop region of the LAMP product, which is crucial for exponential amplification. By destroying the aerosol-prone amplifiable products at the end of each amplification reaction, our design can significantly reduce the amplicons contamination that causes false positive results in point-of-care diagnostics. For at-home self-testing, we designed a low-cost sample-to-result device for fluorescence-based visual interpretation. As well, a commercial portable electrochemical platform was deployed as a proof-of-concept of ready-to-use point-of-care diagnostic systems. The field deployable CoLAMP assay can detect as low as 0.5 copies/μL of SARS-CoV-2 RNA in clinical nasopharyngeal swab samples within 40 min without the need for specialists for its operation.

Proteomics-based mass spectrometry profiling of SARS-CoV-2 infection from human nasopharyngeal samples.

Severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) is the cause of the on‐going global pandemic of coronavirus disease 2019 (COVID‐19) that continues to pose a significant threat to public health worldwide. SARS‐CoV‐2 encodes four structural proteins namely membrane, nucleocapsid, spike, and envelope proteins that play essential roles in viral entry, fusion, and attachment to the host cell. Extensively glycosylated spike protein efficiently binds to the host angiotensin‐converting enzyme 2 initiating viral entry and pathogenesis. Reverse transcriptase polymerase chain reaction on nasopharyngeal swab is the preferred method of sample collection and viral detection because it is a rapid, specific, and high‐throughput technique. Alternate strategies such as proteomics and glycoproteomics‐based mass spectrometry enable a more detailed and holistic view of the viral proteins and host–pathogen interactions and help in detection of potential disease markers. In this review, we highlight the use of mass spectrometry methods to profile the SARS‐CoV‐2 proteome from clinical nasopharyngeal swab samples. We also highlight the necessity for a comprehensive glycoproteomics mapping of SARS‐CoV‐2 from biological complex matrices to identify potential COVID‐19 markers.

A fast and sensitive absolute quantification assay for the detection of SARS-CoV-2 peptides using parallel reaction monitoring mass spectrometry

The on-going SARS-CoV-2 (COVID-19) pandemic has called for an urgent need for rapid and high-throughput methods for mass testing and early detection, prevention as well as surveillance of the disease. We investigated whether targeted parallel reaction monitoring (PRM) quantification using high resolution Orbitrap instruments can provide the sensitivity and speed required for a high-throughput method that could be used for clinical diagnosis. We developed a high-throughput and sensitive PRM-MS assay that enables absolute quantification of SARS-CoV-2 nucleocapsid peptides with short turn-around times by using isotopically labelled synthetic SARS-CoV-2 concatenated peptides. We established a fast and high-throughput S-trap-based sample preparation method and utilized it for testing 25 positive and 25 negative heat-inactivated clinical nasopharyngeal swab samples for SARS-CoV-2 detection. The method was able to differentiate between negative and some of the positive patients with high viral load. Moreover, based on the absolute quantification calculations, our data show that patients with Ct values as low as 17.8 correspond to NCAP protein amounts of around 7.5 pmol in swab samples. The present high-throughput method could potentially be utilized in specialized clinics as an alternative tool for detection of SARS-CoV-2 but will require enrichment of viral proteins in order to compete with RT-qPCR.

Bi-ECDAQ: An electrochemical dual-immuno-biosensor accompanied by a customized bi-potentiostat for clinical detection of SARS-CoV-2 Nucleocapsid proteins

Multiplex electrochemical biosensors have been used for eliminating the matrix effect in complex bodily fluids or enabling the detection of two or more bioanalytes, overall resulting in more sensitive assays and accurate diagnostics. Many electrochemical biosensors lack reliable and low-cost multiplexing to meet the requirements of point-of-care detection due to either limited functional biosensors for multi-electrode detection or incompatible readout systems. We developed a new dual electrochemical biosensing unit accompanied by a customized potentiostat to address the unmet need for point-of-care multi-electrode electrochemical biosensing. The two-working electrode system was developed using screen-printing of a carboxyl-rich nanomaterial containing ink, with both working electrodes offering active sites for recognition of bioanalytes. The low-cost bi-potentiostat system (∼$80) was developed and customized specifically to the bi-electrode design and used for rapid, repeatable, and accurate measurement of electrochemical impedance spectroscopy signals from the dual biosensor. This binary electrochemical data acquisition (Bi-ECDAQ) system accurately and selectively detected SARS-CoV-2 Nucleocapsid protein (N-protein) in both spiked samples and clinical nasopharyngeal swab samples of COVID-19 patients within 30 min. The two working electrodes offered the limit of detection of 116 fg/mL and 150 fg/mL, respectively, with the dynamic detection range of 1–10,000 pg/mL and the sensitivity range of 2744–2936 Ω mL/pg.mm2 for the detection of N-protein. The potentiostat performed comparable or better than commercial Autolab potentiostats while it is significantly lower cost. The open-source Bi-ECDAQ presents a customizable and flexible approach towards addressing the need for rapid and accurate point-of-care electrochemical biosensors for the rapid detection of various diseases.

Functionalized Terpolymer-Brush-Based Biointerface with Improved Antifouling Properties for Ultra-Sensitive Direct Detection of Virus in Crude Clinical Samples.

New analytical techniques that overcome major drawbacks of current routinely used viral infection diagnosis methods, i.e., the long analysis time and laboriousness of real-time reverse-transcription polymerase chain reaction (qRT-PCR) and the insufficient sensitivity of "antigen tests", are urgently needed in the context of SARS-CoV-2 and other highly contagious viruses. Here, we report on an antifouling terpolymer-brush biointerface that enables the rapid and sensitive detection of SARS-CoV-2 in untreated clinical samples. The developed biointerface carries a tailored composition of zwitterionic and non-ionic moieties and allows for the significant improvement of antifouling capabilities when postmodified with biorecognition elements and exposed to complex media. When deployed on a surface of piezoelectric sensor and postmodified with human-cell-expressed antibodies specific to the nucleocapsid (N) protein of SARS-CoV-2, it made possible the quantitative analysis of untreated samples by a direct detection assay format without the need of additional amplification steps. Natively occurring N-protein-vRNA complexes, usually disrupted during the sample pre-treatment steps, were detected in the untreated clinical samples. This biosensor design improved the bioassay sensitivity to a clinically relevant limit of detection of 1.3 × 104 PFU/mL within a detection time of only 20 min. The high specificity toward N-protein-vRNA complexes was validated both by mass spectrometry and qRT-PCR. The performance characteristics were confirmed by qRT-PCR through a comparative study using a set of clinical nasopharyngeal swab samples. We further demonstrate the extraordinary fouling resistance of this biointerface through exposure to other commonly used crude biological samples (including blood plasma, oropharyngeal, stool, and nasopharyngeal swabs), measured via both the surface plasmon resonance and piezoelectric measurements, which highlights the potential to serve as a generic platform for a wide range of biosensing applications.

Instrument-free, CRISPR-based diagnostics of SARS-CoV-2 using self-contained microfluidic system

Rapid and sensitive detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is critical for early diagnostics and timely medical treatment of coronavirus disease 2019 (COVID-19). However, current detection methods typically rely on expensive and bulky instrumentation. Here, we developed a simple, sensitive, instrument-free, CRISPR-based diagnostics of SARS-CoV-2 using a self-contained microfluidic system. The microfluidic chip integrates isothermal amplification, CRISPR cleavage, and lateral flow detection in a single, closed microfluidic platform, enabling contamination-free, visual detection. To simplify the operation and transportation of the device, we lyophilized the CRISPR reagents in the reaction chamber and pre-stored the liquid solutions in blisters. We employed a low-cost, portable hand warmer to incubate the microfluidic chip without the need for electricity. The self-contained microfluidic system can detect down to 100 copies of SARS-CoV-2 RNA. Further, we clinically validated our method by detecting 24 COVID-19 clinical nasopharyngeal swab samples, achieving excellent sensitivity (94.1%), specificity (100%), and accuracy (95.8%). This simple, sensitive, and affordable microfluidic system represents a promising tool for point-of-care diagnostics of COVID-19 and other infectious diseases.

Rapid detection of novel coronavirus SARS-CoV-2 by RT-LAMP coupled solid-state nanopores

The current pandemic of COVID-19 caused by SARS-CoV-2 (severe acute respiratory syndrome coronavirus-2) has raised significant public health concerns. Rapid and accurate testing of SARS-CoV-2 is urgently needed for early detection and control of the disease spread. Here, we present an RT-LAMP coupled glass nanopore digital counting method for rapid detection of SARS-CoV-2. We validated and compared two one-pot RT-LAMP assays targeting nucleocapsid (N) and envelop (E) genes. The nucleocapsid assay was adopted due to its quick time to positive and better copy number sensitivity. For qualitative positive/negative classification of a testing sample, we used the glass nanopore to digitally count the RT-LAMP amplicons and benchmarked the event rate with a threshold. Due to its intrinsic single molecule sensitivity, nanopore sensors could capture the amplification dynamics more rapidly (quick time to positive). We validated our RT-LAMP coupled glass nanopore digital counting method for SARS-CoV-2 detection by using both spiked saliva samples and COVID-19 clinical nasopharyngeal swab samples. The results obtained showed excellent agreement with the gold standard RT-PCR assay. With its integration capability, the electronic nanopore digital counting platform has significant potential to provide a rapid, sensitive, and specific point-of-care assay for SARS-CoV-2.

Optical trapping assisted label-free and amplification-free detection of SARS-CoV-2 RNAs with an optofluidic nanopore sensor

Ultrasensitive, versatile sensors for molecular biomarkers are a critical component of disease diagnostics and personalized medicine as the COVID-19 pandemic has revealed in dramatic fashion. Integrated electrical nanopore sensors can fill this need via label-free, direct detection of individual biomolecules, but a fully functional device for clinical sample analysis has yet to be developed. Here, we report amplification-free detection of SARS-CoV-2 RNAs with single molecule sensitivity from clinical nasopharyngeal swab samples on an electro-optofluidic chip. The device relies on optically assisted delivery of target carrying microbeads to the nanopore for single RNA detection after release. A sensing rate enhancement of over 2,000x with favorable scaling towards lower concentrations is demonstrated. The combination of target specificity, chip-scale integration and rapid detection ensures the practicality of this approach for COVID-19 diagnosis over the entire clinically relevant concentration range from 104-109 copies/mL.

Oil immersed lossless total analysis system for integrated RNA extraction and detection of SARS-CoV-2

The COVID-19 pandemic exposed difficulties in scaling current quantitative PCR (qPCR)-based diagnostic methodologies for large-scale infectious disease testing. Bottlenecks include lengthy multi-step processes for nucleic acid extraction followed by qPCR readouts, which require costly instrumentation and infrastructure, as well as reagent and plastic consumable shortages stemming from supply chain constraints. Here we report an Oil Immersed Lossless Total Analysis System (OIL-TAS), which integrates RNA extraction and detection onto a single device that is simple, rapid, cost effective, and requires minimal supplies and infrastructure to perform. We validated the performance of OIL-TAS using contrived SARS-CoV-2 viral particle samples and clinical nasopharyngeal swab samples. OIL-TAS showed a 93% positive predictive agreement (n = 57) and 100% negative predictive agreement (n = 10) with clinical SARS-CoV-2 qPCR assays in testing clinical samples, highlighting its potential to be a faster, cheaper, and easier-to-deploy alternative for infectious disease testing.

Optimization and Clinical Evaluation of a Multi-Target Loop-Mediated Isothermal Amplification Assay for the Detection of SARS-CoV-2 in Nasopharyngeal Samples.

SARS-CoV-2 is the coronavirus responsible for COVID-19, which has spread worldwide, affecting more than 200 countries, infecting over 140 million people in one year. The gold standard to identify infected people is RT-qPCR, which is highly sensitive, but needs specialized equipment and trained personnel. The demand for these reagents has caused shortages in certain countries. Isothermal nucleic acid techniques, such as loop-mediated isothermal amplification (LAMP) have emerged as an alternative or as a complement to RT-qPCR. In this study, we developed and evaluated a multi-target RT-LAMP for the detection of SARS-CoV-2. The method was evaluated against an RT-qPCR in 152 clinical nasopharyngeal swab samples. The results obtained indicated that both assays presented a “good concordance” (Cohen’s k of 0.69), the RT-LAMP was highly specific (99%) but had lower sensitivity compared to the gold standard (63.3%). The calculated low sensitivity was associated with samples with very low viral load (RT-qPCR Cq values higher than 35) which may be associated with non-infectious individuals. If an internal Cq threshold below 35 was set, the sensitivity and Cohen’s k increased to 90.9% and 0.92, respectively. The interpretation of the Cohen’s k for this was “very good concordance”. The RT-LAMP is an attractive approach for frequent individual testing in decentralized setups.

Optofluidic multiplex detection of single SARS-CoV-2 and influenza A antigens using a novel bright fluorescent probe assay

The urgency for the development of a sensitive, specific, and rapid point-of-care diagnostic test has deepened during the ongoing COVID-19 pandemic. Here, we introduce an ultrasensitive chip-based antigen test with single protein biomarker sensitivity for the differentiated detection of both severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and influenza A antigens in nasopharyngeal swab samples at diagnostically relevant concentrations. The single-antigen assay is enabled by synthesizing a brightly fluorescent reporter probe, which is incorporated into a bead-based solid-phase extraction assay centered on an antibody sandwich protocol for the capture of target antigens. After optimization of the probe release for detection using ultraviolet light, the full assay is validated with both SARS-CoV-2 and influenza A antigens from clinical nasopharyngeal swab samples (PCR-negative spiked with target antigens). Spectrally multiplexed detection of both targets is implemented by multispot excitation on a multimode interference waveguide platform, and detection at 30 ng/mL with single-antigen sensitivity is reported.

A novel One-pot rapid diagnostic technology for COVID-19

Novel coronavirus disease (COVID-19) caused by SARS-CoV-2 is an ongoing global pandemic associated with high rates of morbidity and mortality. RT-qPCR has become the diagnostic standard for the testing of SARS-CoV-2 in most countries. COVID-19 diagnosis generally relies upon RT-qPCR-mediated identification of SARS-CoV-2 viral RNA, which is costly, labor-extensive, and requires specialized training and equipment. Herein, we established a novel one-tube rapid diagnostic approach based upon formamide and colorimetric RT-LAMP (One-Pot RT-LAMP) that can be used to diagnose COVID-19 without the extraction of specific viral RNA. The technique could visually detect SARS-CoV-2 within 45 min with a limit of detection of 5 copies per reaction in extracted RNA, and about 7.66 virus copies per μL in viral transport medium. The One-Pot RT-LAMP test showed a high specificity without cross-reactivity with 12 viruses including SARS-CoV, MERS-CoV, and human infectious influenza virus (H1N1/H3N2 of influenza A and B virus, ect. We validated this One-Pot RT-LAMP approach by its successful use for the analysis of 45 clinical nasopharyngeal swab samples, yielding results identical to those of traditional RT-qPCR analyses, while achieving good selectivity and sensitivity relative to a commercial RT-qPCR approach. As such, this One-Pot RT-LAMP technology may be a valid means of conducting high-sensitivity, low-cost and rapid SARS-CoV-2 identification without the extraction of viral RNA.

Direct diagnostic testing of SARS-CoV-2 without the need for prior RNA extraction

The COVID-19 pandemic has resulted in an urgent need for a rapid, point of care diagnostic testing that could be rapidly scaled on a worldwide level. We developed and tested a highly sensitive and robust assay based on reverse transcription loop mediated isothermal amplification (RT-LAMP) that uses readily available reagents and a simple heat block using contrived spike-in and actual clinical samples. RT-LAMP testing on RNA-spiked samples showed a limit of detection (LoD) of 2.5 copies/μl of viral transport media. RT-LAMP testing directly on clinical nasopharyngeal swab samples in viral transport media had an 85% positive percentage agreement (PPA) (17/20), and 100% negative percentage agreement (NPV) and delivered results in 30 min. Our optimized RT-LAMP based testing method is a scalable system that is sufficiently sensitive and robust to test for SARS-CoV-2 directly on clinical nasopharyngeal swab samples in viral transport media in 30 min at the point of care without the need for specialized or proprietary equipment or reagents. This cost-effective and efficient one-step testing method can be readily available for COVID-19 testing world-wide, especially in resource poor settings.

Direct Detection of SARS-CoV-2 Using Reverse Transcription Loop-Mediated Isothermal Amplification (RT-LAMP) Without RNA Purification

Coronavirus disease 2019 (COVID-19) is an acute respiratory disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) which has spread globally. Shortage of nucleic acid extraction kits may delay the speed of diagnosis. In order to address this need, we propose a simple method for direct RNA extraction from nasopharyngeal swab samples without RNA purification. Here, we describe a reverse transcription loop-mediated isothermal amplification technique with 95.4% sensitivity (95% CI: 84.2-99.4%) and 100% specificity (95% CI: 78-100%). Combined with a simple RNA extraction step, this optimized RT-LAMP method is able to amplify SARS-CoV-2 directly from clinical nasopharyngeal swab samples in viral transport media in 50 minutes. This method provides an opportunity to facilitate SARS-CoV-2 detection especially in resource limited settings where nucleic acid extraction kits are few.Funding: This study was supported by Prototype Research Grant Scheme (PRGS), PR001-2020B (PRGS/2/2020/SKK09/UM/02/1) from the Ministry of Education, Malaysia.Declaration of Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this manuscript.Ethics Approval Statement: Ethical approvals for this study was obtained from UMMC 85 Medical Ethics Committee (202041-8418) and Medical Research Ethics Committee 86 (MREC) Ministry of Health Malaysia (NMRR-20-2344-56994).

Electric field-driven microfluidics for rapid CRISPR-based diagnostics and its application to detection of SARS-CoV-2

The rapid spread of COVID-19 across the world has revealed major gaps in our ability to respond to new virulent pathogens. Rapid, accurate, and easily configurable molecular diagnostic tests are imperative to prevent global spread of new diseases. CRISPR-based diagnostic approaches are proving to be useful as field-deployable solutions. In one basic form of this assay, the CRISPR-Cas12 enzyme complexes with a synthetic guide RNA (gRNA). This complex becomes activated only when it specifically binds to target DNA and cleaves it. The activated complex thereafter nonspecifically cleaves single-stranded DNA reporter probes labeled with a fluorophore-quencher pair. We discovered that electric field gradients can be used to control and accelerate this CRISPR assay by cofocusing Cas12-gRNA, reporters, and target within a microfluidic chip. We achieve an appropriate electric field gradient using a selective ionic focusing technique known as isotachophoresis (ITP) implemented on a microfluidic chip. Unlike previous CRISPR diagnostic assays, we also use ITP for automated purification of target RNA from raw nasopharyngeal swab samples. We here combine this ITP purification with loop-mediated isothermal amplification and the ITP-enhanced CRISPR assay to achieve detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA (from raw sample to result) in about 35 min for both contrived and clinical nasopharyngeal swab samples. This electric field control enables an alternate modality for a suite of microfluidic CRISPR-based diagnostic assays.

Novel human astroviruses in pediatric respiratory samples: A one-year survey in a Swiss tertiary care hospital.

Although classical human astroviruses (HAstV) are known to be a leading cause of viral gastroenteritis, the pathogenesis and clinical manifestations of novel HAstV remain largely unknown. There is mounting evidence that, in contrast to classical astroviruses, novel HAstV exhibit tropism for the upper respiratory tract. This one‐year period prevalence screened all available clinical nasopharyngeal swab samples collected from pediatric patients aged ≤5 years for novel and classical HAstV using real‐time reverse transcription polymerase chain reaction. A total of 205 samples were tested; two novel HAstV cases were detected for a prevalence of 1.3%, with viral loads suggesting active upper respiratory tract replication. No classical HAstV was detected.

A four year seasonal survey of the relationship between outdoor climate and epidemiology of viral respiratory tract infections in a temperate climate

BackgroundThe relation between weather conditions, viral transmission and seasonal activity of respiratory viruses is not fully understood. ObjectivesTo investigate the impact of outdoor weather in a temperate climate setting on the seasonal epidemiology of viruses causing respiratory tract infections, particularly influenza A (IFA). Study designIn total, 20,062 clinical nasopharyngeal swab samples referred for detection of respiratory pathogens using a multiplex PCR panel, between October 2010 and July 2013, were included. Results of PCR detection were compared with local meteorological data for the same period. ResultsLow temperature and vapor pressure (VP) were associated with weekly incidence of IFA, respiratory syncytial virus, metapneumovirus, bocavirus and adenovirus but no association with relative humidity was found. The incidence of human rhinovirus and enterovirus was independent of temperature. During seasonal IFA outbreaks, the weekly drop of average temperature (compared with the week before) was strongly associated with the IFA incidence recorded the following week. ConclusionA sudden drop in outdoor temperature might activate the annual influenza epidemic in a temperate climate by facilitating aerosol spread in dry air. These conditions also seem to affect the incidence of other respiratory pathogens but not human rhino- or enterovirus, suggesting that routes of infection other than aerosol may be relevant for these agents.

Isolating Influenza RNA from Clinical Samples Using Microfluidic Oil-Water Interfaces.

The effective and robust separation of biomolecules of interest from patient samples is an essential step in diagnostic applications. We present a platform for the fast extraction of nucleic acids from clinical specimens utilizing paramagnetic PMPs, an oil-water interface, a small permanent magnet and a microfluidic channel to separate and purify captured nucleic acids from lysate in less than one minute, circumventing the need for multiple washing steps and greatly simplifying and expediting the purification procedure. Our device was able to isolate influenza RNA from clinical nasopharyngeal swab samples with high efficiency when compared to the Ambion® MagMAXTM Viral RNA Isolation Kit, sufficiently separating nucleic acid analytes from PCR-inhibiting contaminants within the lysate while also critically maintaining high integrity of the viral genome. We find that this design has great potential for rapid, efficient and sensitive nucleic acid separation from patient sample.

A packaged paper fluidic-based microdevice for detecting gene expression of influenza A virus

Pathotyping and subtyping of influenza A virus were performed with a packaged paper fluidic-based analytical microdevice (PFAM) after one-step reverse transcription-polymerase chain reaction (RT-PCR). The PFAM contains two test lines: one for detecting M gene to identify the influenza A virus and another for haemagglutinin subtyping to determine the viral strain among H1N1, H3N2, and H5N1. The M gene and the haemagglutinin gene (H1, H3, and H5 genes) were amplified by using the Digoxigenin and the Texas Red modified primers, respectively, in the multiplex RT-PCR. The amplicon products were loaded in the conjugate pad of the PFAM in which the streptavidin coated gold nanoparticles were linked with the biotin moieties that were incorporated in the middle of the DNA strands, and then captured by the anti-Digoxigenin and anti-Texas Red immobilized on the test lines. Influenza A H1N1, H3N2, and H5N1 could be identified with a limit of detection of 102 copies of RNA templates in 10min. Pathotyping and subtyping of the clinical nasopharyngeal swab samples were also analyzed whose results were confirmed by real-time RT-PCR.