Circularly Polarized Square Slot Antenna Research Articles

Broadband CPW-Fed Circularly Polarized Square Slot Antenna for Universal UHF RFID Handheld Reader

This paper presents a new coplanar waveguide (CPW)-fed circularly polarized square slot antenna (CPSSA). The proposed antenna uses an inverted Z-shaped feedline protruded from the signal line of the feeding CPW. Circularly polarized (CP) radiation can be achieved by adequately inserting the arc-shaped grounded strip into the upper right corner of the square slot. The widened vertical tuning stub on the L-shaped grounded strip can improve impedance matching and axial ratio (AR) performance. The measured results indicate that the 10 dB impedance bandwidth is 620 MHz (652-1272 MHz), and the 3 dB axial ratio bandwidth is 320 MHz (840-1160 MHz), which has a broadband characteristic. In the range of the universal UHF RFID band, the measured peak gain is about 4.4 dBi. The proposed CPSSA uses low-cost FR4 material as the dielectric substrate. The overall size of the antenna is 119 × 119 × 0.5 mm3. The proposed antenna has a simple structure, easy processing, good performance, wide operating bandwidth, and dual circular polarization characteristic. It can be applied to the universal UHF RFID handheld reader environment.

A CPW‐fed compact square slot antenna with wideband circularly polarized for C‐band application

AbstractThis paper presents a compact wideband circularly‐polarized square slot antenna (CPSSA). The antenna is a coplanar waveguide feed structure with three T‐stubs toward the slot center and one semi‐circle tuning stub was etched to the feed line and modified inverted L‐shaped strips around the corners of the ground. Moreover, two spiral slots were loaded in the ground plane for exciting currents in a different direction. A prototype of the designed antenna is fabricated and measured to confirm the simulation results. A reasonably good agreement between the measured and simulated results in terms of the reflection coefficient <−10 dB and axial ratio are achieved. The 3‐dB axial ratio bandwidth achieved by the combination is from 4.35 to 8.15 GHz (60%, measured). The designed CPSSA has a compact size of 0.57λₒ × 0.57λₒ × 0.0116λₒ at the center frequency and fabricated on the FR4 substrate.

Wideband circularly polarized parasitic patches loaded coplanar waveguide-fed square slot antenna with grounded strips and slots for wireless communication systems

In this paper, the design, implementation, and experimental validation of a wideband circularly polarized square slot antenna (CPSSA) is presented. The proposed antenna comprises of an irregular square patch, asymmetrical grounded-L strips, an inverted-L grounded slot, a parasitic asymmetrical rectangular split ring resonator (RSRR) and inverted-L strip patches with the overall size of 0.305λL × 0.305λL × 0.007λL. By appropriately embedding strips, slots and parasitic patches on the antenna structure, the measured wideband 3-dB axial ratio bandwidth (ARBW) of 83.2% (2.33–5.65 GHz) is obtained, while the measured impedance bandwidth (IBW) of 86.72% (2.165–5.48 GHz) is achieved. Overall, CP bandwidth is 80.66%. A parametric study of different design parameters is investigated, and the overall performance of the antenna is presented.

Dual wideband circular polarized CPW-fed strip and slots loaded compact square slot antenna for wireless and satellite applications

A small size coplanar waveguide-fed dual wideband circularly polarized square slot antenna (CPSSA) is presented. It composed of an inverted C-shaped patch, grounded-L strip, a pair of grounded spiral slots and a horizontal rectangular grounded slot. The circular polarization (CP) is achieved by embedding grounded-L strip and a pair of grounded spiral slots. By engraving rectangular slot in left corner of CPW ground plane, the 3-dB axial ratio bandwidth (ARBW) of lower band is enhanced and it also generates another CP band at about 12 GHz and a notched band. From the experimental results, it is observed that the 3-dB ARBWs of the proposed antenna are 74.62% (5.01 GHz, 4.21–9.22 GHz) and 12% (1.37 GHz, 11.26–12.62 GHz) while the impedance bandwidths are 92.70% (6.48 GHz, 3.75–10.23 GHz) and 13.70% (1.63 GHz, 11.12–12.75 GHz) in lower and upper bands, respectively. The antenna has peak gain about 3.67 and 6.36 dBic in lower and upper CP bands, respectively, with good LHCP radiations. The overall size of antenna is 20 × 20 × 1 mm3.

Single layer CPSSA array with change polarization diversity in broadband application

The present study proposes a novel broadband circularly polarized (CP) multiple-input multiple-output antenna array designed for C-band applications. The first step was the introduction of a reconfigurable circularly polarized square slot antenna (CPSSA) capable of changing polarization diversity, which could cover impedance bandwidth (BW) from 4.48 to 8.21 GHz with 1.9 GHz of −3 dB axial ratio (AR) BW. Then, a feed network composed of 90° and 180° couplers, a crossover, and delay lines was presented. The CPSSA with two metalized via-holes adopted with two ports polarization diversity fed the networks. A number of reconfigurable CP array antennas using the polarization diversity technique have been presented so far. However, given that the proposed layout designed in a single layer had advantages of reduced antenna size and increased antenna gain and ARBW, this approach has received due attention over recent years. Another promising feature of this approach is its capability to change the polarization diversity by rotation of phases in the array feed network using PIN diodes.

Broadband Circularly Polarized Slot Antenna Array Using Sequentially Rotated Technique for $C$-Band Applications

This letter presents the investigation results on a novel circularly polarized square-slot antenna (CPSSA) array designed to operate at a frequency of 5.5 GHz. In order to realize the proposed antenna array, four miniature circular polarized square-slot antennas are used with L-shape grounded strips located at the slots' opposite corners to reduce cross polarization. The antenna is fed by symmetric coplanar waveguide. The CPSSA element achieves a bandwidth of 16.6% for an axial ratio $\leq 3~$ dB. The CPSSA's performance is further enhanced with the construction of a novel 2 $\,\times\,$ 2 antenna array that is designed using sequentially rotated feed technique. The 3-dB axial ratio of the array extends to approximately 2 GHz with an impedance bandwidth of 31%. The CPSSA array was designed to operate over the frequency range between 4 and 6.825 GHz corresponding to an impedance bandwidth of 52% for ${\rm VSWR} (1.71:1). Acceptable agreement between the simulation and measured results validates the proposed design.

Broadband CPW-Fed Circularly Polarized Square Slot Antenna With Inverted-L Strips for UWB Applications

This letter presents a new design for a circularly polarized square slot antenna (CPSSA). The proposed single-layer antenna composed of a square ground plane embedded with two unequal-size inverted-L strips around two opposite corners is capable of generating a resonant mode for exciting two orthogonal E vectors. In this model, compared to the previous CPSSA structures, the impedance bandwidth and the axial ratio bandwidth of antenna are increased, which is four times wider than the impedance bandwidth of previous similar designs. The designed CPSS antenna with size 60 × 60 × 0.8 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> operates over the frequency band between 2.67 and 13 GHz (4.74:1, 132%) for VSWR <; 2, exhibiting a 32.2% (4.9-6.9 GHz, 1.5:1) circular polarization (CP) bandwidth. Throughout this letter, the improvement process of the axial ratio (AR) and S\\ properties are presented and discussed in detail.

Broadband CPW-Fed Circularly Polarized Square Slot Antenna With Three Inverted-L-Shape Grounded Strips

A new form CPW-fed broadband circularly polarized square slot antenna (CPSSA) with three inverted-L-shape grounded strips around the corners of the slot is proposed and fabricated. In comparison to the previous CPSSA structures, the axial-ratio (AR) bandwidth of the antenna is increased, which is two times wider than the previous proposed design. By embedding the L-shape strip to the ground plane and using the vertical stub to the feed line, very good axial-ratio bandwidth is obtained. The measured impedance bandwidth and AR of the realized CPSS antenna with optimized parameters is from 2 to 7 GHz (3.5:1, 110%) for VSWR ≤ 2 and 2-5 GHz (2.5:1; 85%) for AR ≤ 3 dB respectively. Throughout this letter, the improvement process of the AR and S <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sub> properties is completely presented and discussed.

A NEW TRIPLE BAND CIRCULARLY POLARIZED SQUARE SLOT ANTENNA DESIGN WITH CROOKED T AND F-SHAPE STRIPS FOR WIRELESS APPLICATIONS

A new design for circularly polarized square slot antenna (CPSSA) is presented. The circular polarization operation in the proposed single-layer antenna is created through two equal sized crooked T-shape and an F-shape strips located on the patch. Compared to most of the previously reported CPSSA structures, the impedance bandwidth and the axial ratio bandwidth of the antenna are increased and also the size of the antenna becomes smaller. The presented CPSSA design has the compact dimensions of 40 £ 40 £ 0:8mm 3 , total impedance matching bandwidth of 8.04GHz and exhibiting a 28.03% (4.6{6.1GHz) 3dB axial ratio bandwidth. A prototype of the antenna is fabricated and tested, and a great agreement with simulated results is obtained.

Broadband CPW-Fed Circularly Polarized Square Slot Antenna With Lightening-Shaped Feedline and Inverted-L Grounded Strips

A novel design is described for a circularly polarized square slot antenna (CPSSA). Circular polarization (CP) operations can be attained using a lightening-shaped feedline protruded from the signal line of the feeding coplanar waveguide (CPW). The CP bandwidth can be significantly enhanced by implanting a pair of inverted-L grounded strips into the slot and adjusting the dimensions of the lightening-shaped feedline, whereas the impedance bandwidth can be greatly enlarged through tuning embedded vertical and horizontal stubs. The designed antenna was measured to exhibit a CP bandwidth of as high as 48.8%.

Circularly Polarized Square Slot Antenna With a Pair of Inverted-L Grounded Strips

This paper presents a new wideband circularly polarized square slot antenna (CPSSA) with a coplanar waveguide (CPW) feed. The proposed antenna features two inverted-L grounded strips around two opposite corners of the slot and a widened tuning stub protruded into the slot from the signal strip of the CPW. Broadside circular-polarization (CP) radiation can be easily obtained using a simple design procedure. For the optimized antenna prototype, the measured bandwidth with an axial ratio (AR) of less than 3 dB is larger than 25% and the measured VSWR les 2 impedance bandwidth is as large as 52%.