Circularly Polarized Radiation Pattern Research Articles

CMA-Based Quadruple-Cluster Leaf-Shaped Metasurface-Based Wideband Circularly-Polarized Stacked-Patch Antenna Array for Sub-6 GHz 5G Applications

This research proposes a quadruple-cluster leaf-shaped metasurface (MTS)-based circularly-polarized (CP) stacked-patch antenna array with hybrid coupler feed network for sub-6 GHz 5G applications. In the study, the leaf-shaped MTS-based CP stacked-patch antenna is characterized by characteristic mode analysis (CMA). In the antenna design, one cluster of the quadruple-cluster leaf-shaped MTS-based antenna array consists of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$4\times4$ </tex-math></inline-formula> leaf-shaped MTS elements; and the hybrid coupler feed network is used to enhance impedance bandwidth (IBW), axial ratio bandwidth (ARBW), and antenna gain. Simulations are carried out and an antenna prototype is fabricated and experiments undertaken. The measured IBW, ARBW, and maximum gain at the center frequency (4 GHz) are 62.5% (3.4– 5.9 GHz), 21% (3.8– 4.54 GHz), and 9.04 dBic at 3.9 GHz. The novelty of this research lies in the use of: (i) the CMA concept to design and develop the leaf-shaped wideband MTS-based stacked-patch antenna with CP radiation pattern; and (ii) a low-complexity hybrid coupler feed network to enhance the IBW, ARBW and gain.

A low-profile broadband crossed-dipole antenna with fractal structure and inverted-L plates

A low-profile broadband circularly polarized (CP) crossed-dipole antenna is proposed. In this antenna, the dipole uses a fractal-based structure with multiple similar patches for obtaining broadband CP radiation and impedance matching. The incorporation of the crossed-dipole antenna with four triangular parasitic patches improves both the impedance and axial ratio (AR) bandwidths. Four parasitic coupled inverted-L metal plates are loaded on the ground plane to significantly enhance the AR bandwidth and reduce the antenna profile. The measured results are in agreement with the simulations, which demonstrates that the proposed antenna has a low profile of 0.18 λ0, a − 10 dB impedance bandwidth of 91% (2.78–7.42 GHz), a 3 dB AR bandwidth of 81.5% (2.99–7.1 GHz), and a good right hand circular polarization (RHCP) radiation pattern with an average gain of 7.9 dBi over the whole operating band.

A Pattern Reconfigurable Circularly Polarized Quadrifilar Helix Antenna Through Phase Control

We have proved in theory and simulation that the circularly polarized (CP) radiation from a resonant quadrifilar helix antenna (QHA) is independent of the phase between two composed bifilar helices, while the CP radiation pattern can be reconfigured by controlling this phase. It is demonstrated that the QHA is capable of generating a wide range of CP radiation patterns, including two cardioid patterns toward both ends, two vertical toroid patterns in two different orientations, and the mixed patterns of cardioid and toroid. A wideband and multilayer feeding network was developed to excite the four basic modes of the proposed QHA through phase control in the experiment. The simulated and measured right-handed circular polarization (RHCP) radiation patterns agree quite well. The proposed QHA was also designed to cover several global navigation satellite system (GNSS) bands. The measured impedance bandwidth is 1.26–1.65 GHz (26.8%) and the 3 dB axial ratio bandwidth is 1.1–1.8 GHz (41.4%) in the endfire mode. It is shown that the proposed QHA can be easily operated in two endfire modes to have an equivalent isotropic pattern for flying objects. When the antenna is operating in the endfire mode, the gain is in the range of 2.1–3.5 dBi, and the radiation efficiency is 70%–85% in the operating band.

A Pillbox Based Dual Circularly-Polarized Millimeter-Wave Multi-Beam Antenna for Future Vehicular Radar Applications

In this paper, a dual circularly-polarized (CP) multi-beam antenna is proposed for future vehicular radar applications. The antenna is composed of two pillbox reflector beamforming networks (BFNs) and a series-fed microstrip line based dual CP leaky-wave antenna (LWA) array, which has a symmetrical structure and can obtain both left hand circular polarization (LHCP) and right hand circular polarization (RHCP) by switching the exciting current direction of the microstrip line. Besides, a shorted stub is loaded in the LWA to suppress the open-stop band (OSB), and thus achieve the broadside radiation and good impedance matching of the LWA. To realize the dual-polarized radiation characteristic with low-cost passive beam scanning capability, two pillbox BFNs are connected at both sides of the LWA to share the LWA aperture. The two different BFNs can excite different CP radiation patterns. A prototype of the proposed antenna is fabricated in the frequency band 23.5–24.5 GHz, and the measured results approve that the proposed antenna can realize ±36° beam scanning range with −4.0 dB crossover level, and the gain is higher than 17.7 dBi in the operating band. The advantages of the proposed antenna, including low-profile, low-cost, passive beam scanning ability, and dual circular polarization, make it an attractive choice for low-cost millimeter-wave radar applications.

Harmonic Suppression and Size Reduction of a Low-Profile CP Patch Antenna by Using Nondegenerate Modes

A novel design method of harmonic suppression and size reduction of a circularly polarized (CP) microstrip patch antenna (MPA) is presented by using nondegenerate modes. Based on a circular MPA, a pair of orthogonal modes could be generated between these undesired resonant modes. Then, by loading the shorting pins in a quarter fan-shaped patch, all these undesirable high-order modes could be suppressed between them. After that, the higher and lower modes are moved closer to each other by cutting a long slot at the angle bisector of the fan-shaped patch, providing the CP radiation pattern. Finally, a prototype of this proposed antenna has been designed, produced, and measured to verify the design concept. The experimental results show that the proposed antenna has an impedance bandwidth of 286 MHz (13 774–14 060 MHz), axial ratio bandwidth of 80 MHz (13 900–13 980 MHz), and a left-hand CP peak gain of around 4.8 dBi. Most importantly, the CP antenna has realized the harmonic suppression of about 15 GHz, which has an obvious advantage as compared to the traditional CP MPA. Moreover, the antenna still holds the primary low-profile, single-radiator, simple structure, and high-efficiency simultaneously.

Broadband and Compact Circularly Polarized MIMO Antenna With Concentric Rings and Oval Slots for 5G Application

A broadband and compact size circularly polarized (CP) two-port multiple input multiple output (MIMO) antenna with a footprint of 25 mm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times20$ </tex-math></inline-formula> mm is investigated. The designed oval-shaped MIMO antenna employs concentric rings with oval slots (CROS), along with a circular radiator and two open-ended parallel protruded stubs. The CP radiation is achieved by embedding three oval slots, in which two of them are deployed at the left and right side of the concentric rings, whereas the third one is deployed at the top section of the concentric rings. The measured 10-dB impedance bandwidth of the proposed MIMO antenna was 46.30% (3.12–5.00 GHz), and its corresponding 3-dB axial ratio bandwidth (ARBW) was 41.34% (3.30–5.02 GHz). Furthermore, very wide beamwidths of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$137^{\circ }\pm 0.2$ </tex-math></inline-formula> and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$154^{\circ }\pm 0.2$ </tex-math></inline-formula> were measured in the right-hand circular polarization (RHCP) and left-hand circular polarization (LHCP) radiation patterns, respectively. The minimum achieved isolation between the antenna elements is 18.50 dB without using any additional decoupling structure, and the calculated envelope correlation coefficient (ECC) < 0.03.

Wearable Pattern-Diversity Dual-Polarized Button Antenna for Versatile On-/Off-Body Communications

A wearable dual-port button antenna that excites pattern-diversity dual-polarized waves is proposed for on-/off-body applications. Its simple structure comprises of two radiators and a common ground plane designed into two substrates. The crossed-dipole radiator is made by two symmetric bowtie dipoles printed on a circular-shaped semi-rigid substrate, which covers an ultra-wideband (UWB) application with circular polarization and directional radiation patterns, high gain, and high efficiency suitable for off-body communication. The annular-ring radiator and common ground plane are made by a conductive textile on the square-shaped flexible-felt substrate. The annular-ring radiator is shorted to the ground plane using four vias, which generates triple TM modes covering the 2.45/5.85 GHz wireless body area networks (WBAN) with omni-directional radiation patterns and a 3.8 GHz C-band with a directional radiation pattern suitable for on-/off-body communications. The fabricated antenna is verified by measurement in both free space and phantom body environment. Measurements agreed well with simulations. Simulated specific absorption rates (SARs) under US and EU standards are below the safe level, making the proposed antenna suitable for on-/off-body communications.

A Novel Design of CPW Feed Planar Omnidirectional Circularly Polarized Antenna

A novel planar omnidirectional circularly polarized (CP) antenna is presented. The omnidirectional circular polarization characteristics of the planar antenna are the result of the combined effect of a planar quasi-magnetic dipole (PQMD) and a printed electric dipole (PED) in this paper. The CP radiation pattern of the proposed antenna can be achieved by distributing appropriate current amplitude and phase to both elements, respectively. A power divider is used to adjust the amplitude and phase relationship between two basic components. In order to achieve a planar structure, coplanar waveguide (CPW) feed is adopted to feed the quasi-magnetic dipole for the first time. The overall electrical size of antenna is 1.61λ × 0.38λ. Finally, the correctness of our theoretical analysis is verified by processing and measuring this antenna. Through the analysis of the measurement results, we have obtained the following conclusions: the operating bandwidth of the proposed antenna obtained by measurement is from 5.67 to 5.86 GHz, in which the reflection coefficient is less than −10 dB and the axial ratio is less than 3 dB. Within the available bandwidth, the proposed antenna achieves omnidirectional radiation characteristics with a gain between 0.89 and 2.48 dBic.

A Circularly Polarized Water Patch Antenna

A circularly polarized (CP) water patch antenna is proposed in this letter. Both the patch and the ground plane are composed of distilled water. The water patch is in square shape with two diagonal truncated corners for generating CP radiation pattern. A metallic L-shaped probe is employed as the feeding portion. The entire configuration had been accomplished by a 3-D printed plastic container. Measured results show that the proposed CP water patch antenna can achieve a wide impedance bandwidth of 29%, a 3 dB axial-ratio (AR) bandwidth of 8.0%, a left-hand circular polarization gain up to 3.05 dBic, and a maximum radiation efficiency of 48% over the operating band. This presented design aims to demonstrate the feasibility of using distilled water to form the CP patch antenna. Besides, some parametric studies have also been carried out to investigate the performance characteristics, which significantly provide the design guideline for a range of CP water patch antenna designs in the future.

A Novel Dual-Broadband Circularly Polarized Patch Antenna for Precise Satellite Navigation

This paper presents a novel dual-band circularly polarized patch antenna for precise satellite navigation. The radiation elements are composed of the inner cross-shaped patch and the outer annular patch which are printed on the same surface of one substrate. Two patches work in different bands, respectively, and emit dual-band circularly polarized radiation. In order to obtain a more compact antenna to meet the application of precise satellite navigation, we vertically place four metal cylinders under the ends of the cross-shaped patch to form four capacitive loadings to lower the resonant frequency of the inner cross-shaped patch. A capacitive coupling feed structure is used to match the input impedance of a patch antenna and make the antenna compact enough. The simulated and measured results show that the proposed antenna can produce appropriate dual-band circularly polarized radiation patterns for precise satellite navigation. The measured results of the antenna illustrate that maximum RHCP gain of the antenna is 4.72 dBi in the low band and 3.98 dBi in the high band, the 3 dB gain bandwidth is 70 MHz in the low band and 65 MHz in the high band.

A Simple-Topology Compact Broadband Circularly Polarized Antenna With Unidirectional Radiation Pattern

In this letter, a geometrically simple, reflector-backed single-point-fed circularly polarized (CP) antenna with unidirectional radiation pattern is presented. The structure comprises a simple coplanar waveguide feeding circuit with an open slot etched on one side of the coplanar ground. The enhanced CP bandwidth is obtained by combining the loop mode, the slot mode, and the asymmetrical configuration of the coplanar ground planes along the feedline. All parameters are optimized at the full-wave level of description for the best impedance and axial-ratio (AR) bandwidth. The antenna footprint is only 0.35λ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">o</sub> × 0.39λ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">o</sub> at the lowest CP operating frequency of 3.1 GHz. The measurement results indicate 82% impedance bandwidth (from 3 to 7.2 GHz) and 80% AR bandwidth (from 3.1 to 7.2 GHz). A unidirectional right-hand circular polarization radiation pattern in the +z-direction is also achieved by adding a reflector. The peak realized gain of the antenna is 6.7 dBic, and the peak radiation efficiency is 98%.

The New C-Shaped Parasitic Strip for the Single-Feed Circularly Polarized (CP) Microstrip Antenna Design

A new single-feed circularly polarized (CP) microstrip antenna with the C-shaped parasitic strip is proposed in this paper. The proposed CP antenna is designed for the transmitting terminal in the Global Navigation Satellite System (GNSS). The square patch is surrounded by a C-shaped parasitic strip. By adjusting the parasitic strip dimension, the antenna CP operation is achieved. The main advantage of this method is that those two resonant modes for achieving the CP operation are independent from each other, which is liable to design and debug the proposed CP microstrip antenna. The designed CP microstrip antenna has the good impedance matching, the good CP radiation pattern, and the stable CP gain across the 3 dB AR (axial ratio) bandwidth.

A Circularly Polarized Octagon-Star-Shaped Microstrip Patch Antenna With Conical Radiation Pattern

A new circularly polarized (CP) microstrip patch antenna with conical radiation pattern is proposed and investigated. The proposed CP antenna has a single feed, a low profile, and a very simple structure. The patch has an octagon-star shape, and can be considered as a superimposition of two square patches. By generating two orthogonal degenerated TM11 modes from the two superimposed square patches, omnidirectional CP radiation is achieved for the proposed antenna. The operation mechanism of the antenna is theoretically explained. A prototype of the proposed antenna is fabricated and measured. Measured results are consistent with the simulated and theoretical results. The antenna can produce a conical CP radiation pattern with a measured average axial ratio (AR) of 1.80 dB in the azimuth plane ( $\theta = 45$ °) and a measured 3-dB AR bandwidth covering the global positioning system L1 band.

Dual-band Circularly Polarized Four-arm Spidron Fractal Antenna for Ku-band Satellite Communication

ABSTRACTA dual-band circularly polarized four-arm Spidron fractal antenna is proposed for Ku-band satellite communication. The dual-band characteristic is realized using two-crossed dipole antennas of different lengths. Each dipole arm includes a Spidron fractal patch to generate circular polarization and a printed meander-line to reduce the size. The proposed antenna is fed by a 50- coaxial cable, and a conducting cavity is utilized to obtain a directional circularly polarized radiation pattern. The experiments demonstrate that the fabricated antenna exhibits −10 dB reflection bandwidths ranging from 10.75 GHz to 12.65 GHz and from 13.33 GHz to more than 15 GHz with a broad 3 dB axial ratio bandwidth covering a frequency range of 10.66–14.46 GHz. The measured peak gains are 8.76 dBic in the lower band and 7.43 dBic in the upper band.

Circularly polarized rectangular DRA coupled through orthogonal slot excited with microstrip circular ring feeding structure for Wi-MAX applications

In this article, a wideband circularly polarized rectangular dielectric resonator antenna (RDRA) coupled through orthogonal slots and excited with a new microstrip circular ring has been investigated. Circular polarization has been achieved by using plus shaped (+) slot on the ground plane and excited through a new microstrip circular ring feed. TE11δ mode has been excited in the RDRA which has been confirmed through the distribution of E-field and dielectric waveguide model (DWM) method of RDRA. Circularly polarized (CP) RDRA offering measured −10 dB input impedance bandwidth of 20.79% (centered at 3.27 GHz) and 3 dB axial ratio bandwidth in broadside direction of 12.09% (centered at 3.39 GHz), respectively. From the CP radiation pattern, proposed design confirms that right-handed CP (RHCP) in broadside direction. The difference between RHCP field and left-handed CP (LHCP) field are above −26 dB in operational band. In addition, the proposed CP antenna offers stable gain and radiation efficiency in working bands and it is suitable for IEEE 802.16e/d Wi-MAX (3.3-3.7 GHz) band.

Dual-band circularly polarized flat antenna with plano convex and concave slots for RFID readers

This article has proposed a circularly polarized dual-band antenna with unidirectional pattern operating at the bandwidth frequencies of 920–925 MHz and 2.40–2.48 GHz for radiofrequency identification (RFID) readers. The proposed antenna structure is of a radiating patch with a single feeder and two pairs of plano convex and concave slots. This work has innovated and utilized the convex and concave slotting technique to generate the circular polarization. The simulated results showed that the dual-band antenna is of circular polarization (CP) and unidirectional radiation pattern with the 3 dB axial ratio and the respective gains of 1.31 and 1.36 dBic for the experimental lower and upper bandwidth frequencies. An antenna prototype was subsequently fabricated and tests performed. The simulated and measured results are in good agreement, rendering the proposed dual-band antenna with plano convex and concave slots suitably applicable to the ultrahigh frequency and microwave RFID readers.

A Broadband Slot Antenna With Unidirectional Circularly Polarized Radiation Patterns

A novel circular slot antenna is proposed in this letter to generate a broadband circular polarization (CP) wave. This antenna consists of a Γ-shaped radiator and a circular ground with a cut of three ellipses. By adjusting the size and position of these ellipses, a CP wave can be realized. A chip resistor, which is used to receive the currents and decrease reflection, can significantly enhance the CP bandwidth. The study of the effect to antenna performance of different geometric parameters has been conducted. The results show that good performance of impedance bandwidth ( $S$ 11 < −10 dB) is approximately 106.1% (1.01 ∼ 3.29 GHz), and 3-dB axial-ratio bandwidth is approximately 89.7% (1.26 ∼ 3.31 GHz). Moreover, the antenna exhibits a stable average gain of about 6.0 dBic in the operating band, and the circularly polarized peak gain is about 7.6 dBic.

A novel wideband and circularly polarized cross-dipole antenna

In this paper, we present a novel wideband circularly polarized (CP) composite, called cavity-backed crossed dipole antenna for 2.45 GHz industrial, scientific, and medical (ISM) band wireless communication. To excite the CP radiation effectively, a curved-delay line providing an orthogonal phase difference among the cross-dipole elements is attached at corners of the sequentially rotated elements. By choosing a proper radius of the curved-delay line, a wide input impedance of the antenna can be realized. Unlike conventional cross-dipole antennas, the proposed cross-dipole antenna is designed with an open stub added to the radiating arms of the dipole so that both impedance and axial ratio bandwidths are enhanced. The antenna is center-fed by a 50-Ω coaxial cable and is placed above a cavity-backed reflector to obtain a directional CP radiation pattern. With the advantage of being center-fed, a symmetric CP radiation pattern can be achieved across the entire operating bandwidth. To further improve the directivity and the radiation pattern, a rectangular cavity-backed reflector is used. Simulated and measured results confirm that the proposed antenna has good CP characteristics. The proposed antenna obtains a broad 3-dB axial ratio bandwidth of 49% (1.20 GHz, 1.96–3.16 GHz) and an impedance bandwidth of 67.7% (1.66 GHz, 1.69–3.35 GHz) for reflection coefficient (S11) ≦ −10 dB. It also yields an average CP gain of 9.2 dBic across the operating bandwidth and a peak CP gain of 10 dBic. Copyright © 2016 John Wiley & Sons, Ltd.

A Planar Quasi-Magnetic–Electric Circularly Polarized Antenna

A new planar quasi-magnetic–electric circularly polarized (CP) antenna is proposed. The antenna has a simple planar structure with a small size and a single feed, and produces an omnidirectional CP radiation pattern. It is based on a quarter-wave shorted patch connected with two printed strips. The tangential electric field at the main open aperture of the shorted patch can be considered as an equivalent magnetic current, while the two strips contribute two electric currents. With a single feed, the proposed antenna exhibits an inherent phase difference of about 90° for the two kinds of currents, and therefore, a CP radiation is obtained. The antenna is designed and fabricated. Measured results show that the antenna has an impedance bandwidth of 4.3%. In the band of interest, the antenna generates a circular polarization and an omnidirectional pattern in the plane perpendicular to the magnetic and electric currents, with an average axial ratio below 1.5 dB and a gain between 2.4 and 3.3 dBi.

Pattern Reconfigurable Antenna Array With Circular Polarization

A design for arrays with beam-steering capability in the azimuthal plane is described. The array is a four-sector antenna configuration, and each sector element can generate unidirectional radiation with circular polarization (CP). A reconfigurable $1\times4$ power divider with broadband operation is designed and used to excite the sector elements. By controlling PIN diodes, the divider can offer 11 states for the four outputs, and each state is corresponding to one CP radiation pattern of the array. Prototypes for the sector array and the tunable divider are, respectively, constructed, and the experimental results of the integrated structure demonstrate that, in addition to the beam-steering capability, the array can also generate bidirectional and omnidirectional radiation patterns between 1.9 and 2.3 GHz. Moreover, these steerable beams and radiation patterns have a cross polarization of less than $-18$ dB for all azimuthal angles.