Chromosome Of Gram-negative Bacteria Research Articles

Amikacin: Uses, Resistance, and Prospects for Inhibition.

Aminoglycosides are a group of antibiotics used since the 1940s to primarily treat a broad spectrum of bacterial infections. The primary resistance mechanism against these antibiotics is enzymatic modification by aminoglycoside-modifying enzymes that are divided into acetyl-transferases, phosphotransferases, and nucleotidyltransferases. To overcome this problem, new semisynthetic aminoglycosides were developed in the 70s. The most widely used semisynthetic aminoglycoside is amikacin, which is refractory to most aminoglycoside modifying enzymes. Amikacin was synthesized by acylation with the l-(−)-γ-amino-α-hydroxybutyryl side chain at the C-1 amino group of the deoxystreptamine moiety of kanamycin A. The main amikacin resistance mechanism found in the clinics is acetylation by the aminoglycoside 6′-N-acetyltransferase type Ib [AAC(6′)-Ib], an enzyme coded for by a gene found in integrons, transposons, plasmids, and chromosomes of Gram-negative bacteria. Numerous efforts are focused on finding strategies to neutralize the action of AAC(6′)-Ib and extend the useful life of amikacin. Small molecules as well as complexes ionophore-Zn+2 or Cu+2 were found to inhibit the acetylation reaction and induced phenotypic conversion to susceptibility in bacteria harboring the aac(6′)-Ib gene. A new semisynthetic aminoglycoside, plazomicin, is in advance stage of development and will contribute to renewed interest in this kind of antibiotics.

Engineering Gram-Negative Microbial Cell Factories Using Transposon Vectors.

The construction of microbial cell factories à la carte largely depends on specialized molecular biology and synthetic biology tools needed to reprogram bacteria for modifying their existing functions or for bestowing them with new-to-Nature tasks. In this chapter, we document the use of a series of broad-host-range mini-Tn5 vectors for the delivery of gene(s) into the chromosome of Gram-negative bacteria and for the generation of saturated, random mutagenesis libraries for studies of gene function. The application of these tailored mini-transposon vectors, which could also be used for chromosomal engineering of a wide variety of Gram-negative microorganisms, is demonstrated in the platform environmental bacterium Pseudomonas putida KT2440.

New transposon tools tailored for metabolic engineering of gram-negative microbial cell factories.

Re-programming microorganisms to modify their existing functions and/or to bestow bacteria with entirely new-to-Nature tasks have largely relied so far on specialized molecular biology tools. Such endeavors are not only relevant in the burgeoning metabolic engineering arena but also instrumental to explore the functioning of complex regulatory networks from a fundamental point of view. À la carte modification of bacterial genomes thus calls for novel tools to make genetic manipulations easier. We propose the use of a series of new broad-host-range mini-Tn5-vectors, termed pBAMDs, for the delivery of gene(s) into the chromosome of Gram-negative bacteria and for generating saturated mutagenesis libraries in gene function studies. These delivery vectors endow the user with the possibility of easy cloning and subsequent insertion of functional cargoes with three different antibiotic-resistance markers (kanamycin, streptomycin, and gentamicin). After validating the pBAMD vectors in the environmental bacterium Pseudomonas putida KT2440, their use was also illustrated by inserting the entire poly(3-hydroxybutyrate) (PHB) synthesis pathway from Cupriavidus necator in the chromosome of a phosphotransacetylase mutant of Escherichia coli. PHB is a completely biodegradable polyester with a number of industrial applications that make it attractive as a potential replacement of oil-based plastics. The non-selective nature of chromosomal insertions of the biosynthetic genes was evidenced by a large landscape of PHB synthesis levels in independent clones. One clone was selected and further characterized as a microbial cell factory for PHB accumulation, and it achieved polymer accumulation levels comparable to those of a plasmid-bearing recombinant. Taken together, our results demonstrate that the new mini-Tn5-vectors can be used to confer interesting phenotypes in Gram-negative bacteria that would be very difficult to engineer through direct manipulation of the structural genes.

Implantation of unmarked regulatory and metabolic modules in Gram-negative bacteria with specialised mini-transposon delivery vectors

Engineering of robust and safe microbial cell factories requires genetic tools somewhat different from those traditionally used for laboratory-adapted microorganisms. We took advantage of the properties of broad-host-range mini-Tn5 vectors and two regulated expression systems (LacIQ/Ptrc and XylS/Pm), together with FRT-flanked, excisable antibiotic resistance determinants, to generate a set of vectors for the delivery of gene(s) into the chromosome of Gram-negative bacteria. This arrangement of modular elements allows the cloning and subsequent markerless insertion of expression cargoes and leaves behind an antibiotic-sensitive host upon the action of the yeast Flp recombinase. We engineered a Pseudomonas putida KT2440 Pm::gfp strain that displayed strong fluorescence upon exposure to 3-methylbenzoate, a XylS effector, and allowed us to examine the performance of the Pm promoter at the single cell level. We also reconstructed a device for sugar transport and phosphorylation in Escherichia coli independent of the native phosphoenolpyruvate-dependent phosphotransferase system by the stable implantation of genes derived from the obligate anaerobe Zymomonas mobilis. In both cases, the information carried by the implanted genes was stably inherited in the absence of any selective pressure. Deliverable expression systems such as those described here will enhance the applicability of various Gram-negative bacteria in biocatalysis and environmental bioremediation.

Random transposon vectors pUTTns for the markerless integration of exogenous genes into gram-negative eubacteria chromosomes

A set of random transposon vectors pUTTns that facilitates the markerless integration of new functions into the chromosome of gram-negative bacteria has been developed. The vectors, which are derived from mini-Tn5 transposons, are located on a R6K-based suicide delivery plasmid that provides the IS 50 R transposase tnp gene in cis, but they are external to the mobile element. The vectors' conjugal transfer to recipients is mediated by RP4 mobilization functions in the donor. Internal to the mini-Tn5 element is a cassette that contains a selectable antibiotic resistance marker (kanamycin, chloramphenicol, or tetracycline resistance gene), a counter-selectable marker ( sacB), a 430-bp repeat of the sacB gene 3′ end acted as the directly-repeated (DR) sequence, and modified multiple cloning sites (MCS). After two total rounds of transposon integration and recombination between the two DRs, only the exogenous DNA inserted into the MCS (passenger genes) and a single 430-bp scar sacBDR fragment remained in the chromosome after excision. The utility of these vectors was demonstrated by integrating the organophosphorus insecticide hydrolase gene ( mpd) into the chromosome of Escherichia, Pseudomonas, Sphingomonas, and Paracoccus species. Sequential integration of another organophosphorus insecticide hydrolase gene ( oph) into the previously engineered bacteria, without bringing any selectable markers, was also successful. These engineered bacteria were relatively stable. Cell viability and original degrading characteristics were not affected compared with the original recipients. This shows that the developed system is very useful for the markerless integration of exogenous genes into the chromosome of gram-negative eubacteria.

NKBOR, a mini-Tn 10-based transposon for random insertion in the chromosome of Gram-negative bacteria and the rapid recovery of sequences flanking the insertion sites in Escherichia coli

We have constructed an R6K-based suicide vector that permits the random insertion of a mini-transposon named NKBOR into the chromosome of Gram-negative bacteria and the subsequent rapid cloning of sequences flanking the insertion site in Escherichia coli. This mini-transposon contains a conditional R6K plasmid origin of replication, a kanamycin resistance gene and unique restriction sites between the IS 10 inverted repeats. NKBOR can be propagated by replication in an E. coli strain containing the R6K replicase π protein. Alternatively the mini-transposon can be replicated in a pSC101 derivative that is thermosensitive for its replication so that the mini-transposon acts as a suicide plasmid at nonpermissive temperatures. Efficient NKBOR transposition is ensured by expression of an adjacent transposase gene and has been demonstrated in E. coli, Klebsiella pneumoniae, and Erwinia carotovora. Sequences flanking the insertion sites in these strains can be rapidly recovered and identified in E. coli strains expressing the R6K π protein.

A panel of Tn 7-based vectors for insertion of the gfp marker gene or for delivery of cloned DNA into Gram-negative bacteria at a neutral chromosomal site

The use of Tn 7-based systems for site-specific insertion of DNA into the chromosome of Gram-negative bacteria has been limited due to the lack of appropriate vectors. We therefore developed a flexible panel of Tn 7 delivery vectors. In one group of vectors, the miniTn 7 element, which is inserted into the chromosome, contains a multiple cloning site (MCS) and the kanamycin, streptomycin or gentamicin resistance markers. Another group of vectors intended for tagging with green fluorescent protein (GFP) carries the gfpmut3* gene controlled by the modified lac promoter P A1/04/03, several transcriptional terminators, and various resistance markers. These vectors insert Tn 7 into a specific, neutral intergenic region immediately downstream of the gene encoding glucosamine-6-phosphate synthetase (GlmS) in the tested fluorescent Pseudomonas strains. The gfp-tagging vector containing a gentamicin-resistance marker is useful for tagging strains carrying a Tn 5 transposon. Tn 5 transposons often carry kanamycin-resistance-encoding genes and are frequently used to generate bacterial mutants and to deliver reporter constructions in gene expression studies. To demonstrate the utility of a dual marker/reporter system, the Tn 7- gfp marker system was combined with a Tn 5-delivered luxAB reporter system in Pseudomonas fluorescens. The system allowed detection of gfp-tagged cells in the barley rhizosphere, while expression of the Tn 5-tagged locus could be determined by measuring bioluminescence.

The pKNOCK series of broad-host-range mobilizable suicide vectors for gene knockout and targeted DNA insertion into the chromosome of gram-negative bacteria.

The pKNOCK series of broad-host-range mobilizable suicide vectors for gene knockout and targeted DNA insertion into the chromosome of gram-negative bacteria.

An Escherichia coli hemolysin transport system-based vector for the export of polypeptides: export of Shiga-like toxin IIeB subunit by Salmonella typhimurium aroA.

The export of Escherichia coli hemolysin across the cytoplasmic and the outer membranes requires the COOH-terminal signal sequence of HlyA, the two specific translocator proteins HlyB and HlyD, and the outer membrane protein TolC. We have developed an export cloning system that is composed of two vectors: one in which the fusion of the desired gene with the 3'-end of hlyA is generated, and a second in which the sequences containing the fusion are combined with the accessory genes hlyB and hlyD, thereby reconstructing the natural organization of the hly locus. In the second vector the fusion and the accessory genes are flanked by Notl sites, allowing subcloning of the whole cluster into a variety of minitransposons to achieve the stable integration of the constructs into the chromosome of Gram-negative bacteria. Since some applications may require the production of transcriptional fusions, an alternative version of the system provides the efficient translation initiation region of T7 phage gene 10 upstream of the fusion protein coding sequence. The usefulness of the system was assessed by constructing a fusion between the gene encoding the B subunit of Shiga-like toxin lle and the 3'-end of hlyA. An attenuated Salmonella typhimurium vaccine strain harboring the resulting construct, either in multicopy or monocopy, efficiently expressed and exported the chimeric protein. We anticipate that this system will lead to a higher stability of the engineered function and permit a faithful monitoring of the export of the recombinant peptide under physiologic single-copy conditions.

Mini-Tn 10 transposon derivatives for insertion mutagenesis and gene delivery into the chromosome of Gram-negative bacteria

Four mini-Tn10 derivatives bearing the nptII, cat, aacC1 and tet genes along with MCS of the pBluescriptII plasmid were constructed. These derivatives are embedded into the γ- ori R6K-based suicide plasmid pBSL177, which can be mobilized into a broad range of hosts by the RP4 plasmid. The relatively small size and the presence of the mutant ATS Tn10 transposase gene, fused to P tac, promoter, as well as the versatile MCS of the pBluescriptII plasmid make these vectors a reliable tool for insertion mutagenesis and chromosomal insertion of the cloned DNA fragments.

A DNA module encoding bph genes for the degradation of polychlorinated biphenyls (PCBs).

In this report we describe the development and construction of a DNA module which encodes bph genes for the metabolism of PCBs and which is capable of stable integration into the chromosome of Gram negative bacteria. Introduction of the bph-module into Pseudomonas putida KT2442, Pseudomonas sp. strain B13 and its genetically engineered derivative B13FR1 expanded the biodegradative ability of these strains to include biphenyl and 4-chlorobiphenyl. The bph operon was stably inherited under laboratory conditions. Behavior of the genetically engineered strains was evaluated under simulated natural habitat conditions in lake sediment microcosms with respect to survival and removal of 4-chlorobiphenyl. The genetically engineered strains persisted under these conditions and were effective in degrading 4-chlorobiphenyl over a five day incubation period.

Transposon mutagenesis in Legionella pneumophila: I. — Persistence of suicide and broad host-range plasmids

Two of three highly virulent strains of Legionella pneumophila could act as recipients at high frequencies in conjugation experiments with Escherichia coli donor strains carrying broad host-range plasmids belonging to incompatibility groups N, P and W. All broad host-range and most transposon-deliveru plasmids persisted within transconjugants with high stability. Only one (pSUP1021) of several vehicles designed for the delivery of transposons into the chromosome of Gram-negative bacteria was found to yield transposon mutants of Legionella at a detectable frequency.

An improved Tn7-based system for the single-copy insertion of cloned genes into chromosomes of gram-negative bacteria

A system is described for the single-copy, stable insertion of cloned DNA sequences into the chromosomes of Gram − bacteria. Two narrow-host-range plasmids form the basis of this system: the ‘carrier’ plasmid contains the mini Tn7-Km transposon, into which foreign DNA can be cloned; the ‘helper’ plasmid provides the Tn7 transposition functions in trans. Both plasmids are readily transferred into Gram − bacteria by conjugation. The functionality of this system has been demonstrated in Rhodospirillum rubrum.

A broad-host-range shuttle system for gene insertion into the chromosomes of Gram-negative bacteria

A deletion derivative of transposon Tn7 containing the Escherichia coli lacZY genes as a selectable marker for insertion of foreign DNA into the chromosomes of soil bacteria was improved to facilitate the cloning of additional genes and their insertion by this element. This report describes a series of plasmid vectors that enable this cloning to be carried out in small, high-copy, narrow host-range plasmids. The final Tn element can then be easily moved (by transposition) without further use of restriction enzymes, to plasmids suitable for delivering it to the bacterial chromosome. The very high specificity for insertion of Tn7 into single locations in bacterial chromosomes has been exploited in the construction of a shuttle system for delivering these Tn7 elements.

IS21 insertion in the trfA replication control gene of chromosomally integrated plasmid RP1: a property of stable Pseudomonas aeruginosa Hfr strains.

Broad host range IncP-1 plasmids are able to integrate into the chromosome of gram-negative bacteria. Strains carrying an integrated plasmid can be obtained when the markers of a temperature-sensitive (ts) plasmid derivative are selected at non-permissive temperature; in this way Hfr (high frequency) donor strains can be formed. The integrated plasmids, however, tend to be unstable in the absence of continuous selective pressure. In order to obtain stable Hfr donor strains of Pseudomonas aeruginosa PAO, we constructed a derivative of an RP1 (ts) plasmid, pME134, which was defective in the resolvase gene (tnpR) of transposon Tn801. Chromosomal integration of pME134 was selected in a recombination-deficient (rec-102) PAO strain at 43 degrees C. Plasmid integration occurred at different sites resulting in a useful set of Hfr strains that transferred chromosomal markers unidirectionally. The tnpR and rec-102 mutations prevented plasmid excision from the chromosome. In several (but not all) Hfr strains that grew well and retained the integrated plasmid at temperatures below 43 degrees C, the insertion element IS21 of RP1 was found to be inserted into the trfA locus (specifying an essential trans-acting replication function) of the integrated plasmid. One such Hfr strain was rendered rec+; from its chromosome the pME134::IS21 plasmid (= pME14) was excised and transferred by conjugation to Escherichia coli where pME14 could replicate autonomously only when a helper plasmid provided the trfA+ function in trans. Thus, it appears that trfA inactivation favours the stability of chromosomally integrated RP1 in P. aeruginosa.

A broad-host-range cloning vector transposable to various replicons

A system is described for the stable insertion of cloned DNA sequences into the chromosomes of Gram-negative bacteria. Two broad-host-range plasmids form the basis of the system: one (the “carrier”) contains a transposable DNA sequence into which foreign DNA can be cloned; the second (the “helper”) provides transposition functions in trans. Both plasmids can be readily transferred between Gram-negative bacteria by conjugation. Instability of the carrier allows enrichment for the products of transposition to the chromosome of the new host, following which the insertion can be stabilised by elimination of the helper. The system was successfully tested in Escherichia coli, Methylophilus methylotrophus and Pseudomonas aeruginosa, and the insertions were stable in each case (< 0.02% loss per generation).