Chromophore Region Research Articles

The interconnecting hairpin extension "arm": An essential allosteric element of phytochrome activity

In red-light sensing phytochromes, isomerization of the bilin chromophore triggers structural and dynamic changes across multiple domains, ultimately leading to control of the output module (OPM) activity. In between, a hairpin structure, "arm", extends from an interconnecting domain to the chromophore region. Here, by removing this protein segment in a bacteriophytochrome from Deinococcus radiodurans (DrBphP), we show that the arm is crucial for signal transduction. Crystallographic, spectroscopic, and biochemical data indicate that this variant maintains the properties of DrBphP in the resting state. Spectroscopic data also reveal that the armless systems maintain the ability to respond to light. However, there is no subsequent regulation of OPM activity without the arms. Thermal denaturation reveals thatthe arms stabilize the DrBphP structure. Our results underline the importance of the structurally flexible interconnecting hairpin extensions and describe their central role in the allosteric coupling of phytochromes.

Selection of green fluorescent proteins by in vitro compartmentalization using microbead-display libraries

In vitro compartmentalization (IVC) is a method to link genotype and phenotype by confining DNA and an in vitro gene expression system in cell-like compartments such as water-in-oil microdroplets. IVC provides a flexible platform for the selection and directed evolution of peptides, proteins, and RNAs with the desired catalytic, binding, and regulatory activities. However, in general, IVC requires confinement of a gene library in each compartment at the single-molecule level, resulting in the low expression level and activity of the protein and difficulty in recovering the DNA. To overcome the problems, we devised an alternative approach using microbeads displaying multiple copies of single genes prepared by on-bead emulsion PCR. We showed that this approach could increase the levels of protein synthesized compared with conventional IVC. Moreover, by employing this approach, we screened a library of green fluorescent protein (GFP) genes containing random sequences in the chromophore region and obtained genes encoding GFPs with different spectral characteristics in only a single round of screening. The result shows that our approach has great potential for practical applications in improving the properties or identifying new properties of enzymes, ribozymes, and their regulators.

Identification and validation of a novel anti-virulent that binds to pyoverdine and inhibits its function

ABSTRACT Pseudomonas aeruginosa: causes serious infections in patients with compromised immune systems and exhibits resistance to multiple antibiotics. The rising threat of antimicrobial resistance means that new methods are necessary for treating microbial infections. We conducted a high-throughput screen for compounds that can quench the innate fluorescence of the chromophore region of the P. aeruginosa siderophore pyoverdine, a key virulence factor. Several hits were identified that effectively quench pyoverdine fluorescence, and two compounds considerably improved the survival of Caenorhabditis elegans when worms were challenged with P. aeruginosa. Commercially available analogs of the best hit, PQ3, were tested for their ability to rescue C. elegans from P. aeruginosa and to interact with pyoverdine via fluorescence and solution NMR spectroscopy. 1H-15N and 1H-13C HSQC NMR were used to identify the binding site of PQ3c. The structure model of pyoverdine in complex with PQ3c was obtained using molecular docking and molecular dynamics simulations. PQ3c occupied a shallow groove on pyoverdine formed by the chromophore and N-terminal residues of the peptide chain. Electrostatic interactions and π-orbital stacking drove stabilization of this binding. PQ3c may serve as a scaffold for the development of pyoverdine inhibitors with higher potency and specificity. The discovery of a small-molecule binding site on apo-pyoverdine with functional significance provides a new direction in the search of therapeutically effective reagent to treat P. aeruginosa infections. Abbreviations: NMR: nuclear magnetic resonance; SAR: structure–activity relationship; MD: molecular dynamics; RMSF: root-mean-square fluctuation; HSQC: heteronuclear single quantum correlation; DMSO: dimethyl sulfoxide; Δδavg: average amide chemical shift change; DSS: 2,2-dimethyl-2-silapentane-5-sulfonate; RMSD: root-mean-square deviation; LJ-SR: Lennard–Jones short-range; Coul-SR: Coulombic short-range; FRET: fluorescence resonance energy transfer

Multistate QM/QM Extrapolation of UV/Vis Absorption Spectra with Point Charge Embedding.

The simulation of UV/vis absorption spectra of large chromophores is prohibitively expensive with accurate quantum mechanical (QM) methods. Thus, hybrid methods, which treat the core chromophoric region at a high level of theory while the substituent effects are treated with a more computationally efficient method, may provide the best compromise between cost and accuracy. The ONIOM (Our own N-layered Integrated molecular Orbital molecular Mechanics) method has proved successful at describing ground-state processes. However, for excited states, it suffers from difficulties in matching the correct excited states among the different levels of theory. We devised an approach, based on the ONIOM extrapolation formula, to combine two QM levels of theory to extrapolate entire excitation bands rather than individual states. In this contribution, we extend the same QM/QM hybrid scheme to include polarization effects on the core region through point charge embedding. The charges are computed to reproduce the electrostatic potential of the entire chromophore at the low level of theory, with proper constraints to avoid overpolarization issues at the boundary between layers. We test this approach on a variety of model compounds that show how the multistate QM/QM-embedding scheme is able to accurately reproduce the spectrum of the entire system at the high level of theory better than (i) the bare QM/QM hybrid scheme, (ii) the low-level calculation on the entire system, and (iii) the high-level calculation on the core region.

Proton Wire Dynamics in the Green Fluorescent Protein.

Inside proteins, protons move on proton wires (PWs). Starting from the highest resolution X-ray structure available, we conduct a 306 ns molecular dynamics simulation of the (A-state) wild-type (wt) green fluorescent protein (GFP) to study how its PWs change with time. We find that the PW from the chromophore via Ser205 to Glu222, observed in all X-ray structures, undergoes rapid water molecule insertion between Ser205 and Glu222. Sometimes, an alternate Ser205-bypassing PW exists. Side chain rotations of Thr203 and Ser205 play an important role in shaping the PW network in the chromophore region. Thr203, with its bulkier side chain, exhibits slower transitions between its three rotameric states. Ser205 experiences more frequent rotations, slowing down when the Thr203 methyl group is close by. The combined states of both residues affect the PW probabilities. A random walk search for PWs from the chromophore reveals several exit points to the bulk, one being a direct water wire (WW) from the chromophore to the bulk. A longer WW connects the "bottom" of the GFP barrel with a "water pool" (WP1) situated below Glu222. These two WWs were not observed in X-ray structures of wt-GFP, but their analogues have been reported in related fluorescent proteins. Surprisingly, the high-resolution X-ray structure utilized herein shows that Glu222 is protonated at low temperatures. At higher temperatures, we suggest ion pairing between anionic Glu222 and a proton hosted in WP1. Upon photoexcitation, these two recombine, while a second proton dissociates from the chromophore and either exits the protein using the short WW or migrates along the GFP-barrel axis on the long WW. This mechanism reconciles the conflicting experimental and theoretical data on proton motion within GFP.

Structural Determinants of Improved Fluorescence in a Family of Bacteriophytochrome-Based Infrared Fluorescent Proteins: Insights from Continuum Electrostatic Calculations and Molecular Dynamics Simulations.

Using X-ray crystallography, continuum electrostatic calculations, and molecular dynamics simulations, we have studied the structure, protonation behavior, and dynamics of the biliverdin chromophore and its molecular environment in a series of genetically engineered infrared fluorescent proteins (IFPs) based on the chromophore-binding domain of the Deinococcus radiodurans bacteriophytochrome. Our study suggests that the experimentally observed enhancement of fluorescent properties results from the improved rigidity and planarity of the biliverdin chromophore, in particular of the first two pyrrole rings neighboring the covalent linkage to the protein. We propose that the increases in the levels of both motion and bending of the chromophore out of planarity favor the decrease in fluorescence. The chromophore-binding pocket in some of the studied proteins, in particular the weakly fluorescent parent protein, is shown to be readily accessible to water molecules from the solvent. These waters entering the chromophore region form hydrogen bond networks that affect the otherwise planar conformation of the first three rings of the chromophore. On the basis of our simulations, the enhancement of fluorescence in IFPs can be achieved either by reducing the mobility of water molecules in the vicinity of the chromophore or by limiting the interactions of the nearby protein residues with the chromophore. Finally, simulations performed at both low and neutral pH values highlight differences in the dynamics of the chromophore and shed light on the mechanism of fluorescence loss at low pH.

Homo‐double helix formation of an optically active conjugated polymer bearing carboxy groups and amplification of the helicity upon complexation with achiral and chiral amines

ABSTRACTAn optically active, m‐terphenyl‐based π‐conjugated polymer bearing carboxy groups was synthesized by the copolymerization of the diethynyl monomer bearing a carboxy group with (S,S)‐2,5‐bis(2‐methylbutoxy)‐1,4‐dibromobenzene using Sonogashira reaction. The copolymer showed a weak circular dichroism (CD) in the main‐chain chromophore region due to a homo‐double helix formation with an excess helical handedness biased by the chiral alkoxy substituents through self‐association. However, upon complexation with achiral amines, such as piperidine, the CD intensity of the polymer significantly increased resulting in the formation of a greater excess one‐handed homo‐double helix via hydrogen‐bonded inclusion complexation with the achiral amines between each strand, leading to the amplification of the helicity. A preferred‐handed homo‐double helix was also induced in the polymer in the presence of nonracemic amines. The effect of the achiral and chiral amines on the homo‐double helix formation was investigated by comparing the CD spectra of the polymer to those of its model dimer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015, 53, 990–999

Engineering color variants of green fluorescent protein (GFP) for thermostability, pH-sensitivity, and improved folding kinetics.

A number of studies have been conducted to improve chromophore maturation, folding kinetics, thermostability, and other traits of green fluorescent protein (GFP). However, no specific work aimed at improving the thermostability of the yellow fluorescent protein (YFP) and of the pH-sensitive, yet thermostable color variants of GFP has so far been done. The protein variants reported in this study were improved through rational multiple site-directed mutagenesis of GFP (ASV) by introducing up to ten point mutations including the mutations near and at the chromophore region. Therefore, we report the development and characterization of fast folder and thermo-tolerant green variant (FF-GFP), and a fast folder thermostable yellow fluorescent protein (FFTS-YFP) endowed with remarkably improved thermostability and folding kinetics. We demonstrate that the fluorescence intensity of this yellow variant is not affected by heating at 75°C. Moreover, we have developed a pH-unresponsive cyan variant AcS-CFP, which has potential use as part of in vivo imaging irrespective of intracellular pH. The combined improved properties make these fluorescent variants ideal tools to study protein expression and function under different pH environments, in mesophiles and thermophiles. Furthermore, coupling of the FFTS-YFP and AcS-CFP could potentially serve as an ideal tool to perform functional analysis of live cells by multicolor labeling.

Gelation-Induced Visible Supramolecular Chiral Recognition by Fluorescent Metal Complexes of Quinolinol–Glutamide

Three metal complexes consisting of Li(+), Zn(2+), and Al(3+) and quinolinol-functionalized L-glutamides (HQLG), (abbreviated as LiHQLG, Zn(HQLG)2, and Al(HQLG)3) were found to form fluorescent metallogels in several organic solvents. In solution, these chiral complexes showed neither any CD signal in the chromophore region nor chiral recognition of the chiral species. However, upon gel formation, the supramolecular chirality emerged because of the self-assembled nanostructures, which provided an opportunity for the chiral recognition of enantiomeric ligands. The metallogels showed different fluorescence changes when they met with enantiomeric (R,R)- or (S,S)-1,2-diaminocyclohexane. Among them, the Al(HQLG)3 metallogels did not show any change whereas the LiHQLG gels exhibited the same decrease in fluorescence. Interestingly, the Zn(HQLG)2 gels showed obviously different fluorescent color with respect to (R,R)- and (S,S)-1,2-diaminocyclohexane, thus providing visible chiral recognition via the naked eye. Such different recognition ability was discussed on the basis of the assembled chiral nanostructures and the primary molecular structures of the metal complexes. It was shown that both of them played important roles in chiral recognition.

Elimination of Redundant and Stop Codons during the Chemical Synthesis of Degenerate Oligonucleotides. Combinatorial Testing on the Chromophore Region of the Red Fluorescent Protein mKate

Although some strategies have been reported for the elimination of stop and redundant codons during the chemical synthesis of degenerate oligonucleotides, incorporating an expensive cocktail of 20 trimer-phosphoramidites is currently a commonly employed and straightforward approach. As an alternative option, we describe here a cheaper strategy based on standard monomer-phosphoramidites and a simplified resin-splitting procedure. The accurate division of the resin, containing the growing oligonucleotide, into four columns represents the key step in this approach. The synthesis of the degenerate codon NDT in column 1, loaded with 60% of the resin, produces 12 codons, while a degenerate codon VMA in column 2, loaded with 30% of the resin, produces 6 codons. Codons ATG and TGG, independently synthesized in columns 3 and 4, respectively, and loaded with 5% each, completes the 20 different codons. The experimental frequency of each mutant codon in the library was assessed by randomizing 12 contiguous codons that encode for amino acids located in the chromophore region of the enhanced red fluorescent protein mKate-S158A. Furthermore, randomization of three contiguous codons that encode for the amino acids Phe62, Met63, and Tyr64, which are equivalent to Phe64, Ser65, and Tyr66 in GFP, gave rise to some red and golden yellow fluorescent mutants displaying interesting phenotypes and spectroscopic properties. The absorption and emission spectra of two of these mutants also suggested that the complete maturation of the red and golden yellow chromophores in mKate proceeds via the formation of a green-type chromophore and a cyan-type chromophore, respectively.

Fluorescent protein engineering by in vivo site‐directed mutagenesis

AbstractIn vivo site‐directed mutagenesis by single‐stranded deoxyribonucleic acid recombineering is a facile method to change the color of fluorescent proteins (FPs) without cloning. Two different starting alleles of GFP were targeted for mutagenesis: gfpmut3* residing in the Escherichia coli genome and egfp carried by a bacterial/mammalian dual expression lentiviral plasmid vector. Fluorescent protein spectra were shifted by subtle modification of the chromophore region and residues interacting with the chromophore of the FP. Eight different FPs (Violeta, Azure, Aqua, Mar, Celeste, Amarillo, Mostaza, and Bronze) were isolated and shown to be useful in multicolor imaging and flow cytometry of bacteria and transgenic human stem cells. To make in vivo site‐directed mutagenesis more efficient, the recombineering method was optimized using the fluorescence change as a sensitive quantitative assay for recombination. A set of rules to simplify mutant isolation by recombineering is provided. © 2012 IUBMB IUBMB Life, 2012

Fluorescent protein engineering by in vivo site‐directed mutagenesis

In vivo site-directed mutagenesis by single-stranded deoxyribonucleic acid recombineering is a facile method to change the color of fluorescent proteins (FPs) without cloning. Two different starting alleles of GFP were targeted for mutagenesis: gfpmut3* residing in the Escherichia coli genome and egfp carried by a bacterial/mammalian dual expression lentiviral plasmid vector. Fluorescent protein spectra were shifted by subtle modification of the chromophore region and residues interacting with the chromophore of the FP. Eight different FPs (Violeta, Azure, Aqua, Mar, Celeste, Amarillo, Mostaza, and Bronze) were isolated and shown to be useful in multicolor imaging and flow cytometry of bacteria and transgenic human stem cells. To make in vivo site-directed mutagenesis more efficient, the recombineering method was optimized using the fluorescence change as a sensitive quantitative assay for recombination. A set of rules to simplify mutant isolation by recombineering is provided.

Modified silica-containing matrices towards the MALDI-TOF-MS detection of small molecules

The new silica-based matrices were designed to demonstrate the concept of using silica to immobilize classic MALDI matrix materials for the analysis of small molecules (<600 Da). The matrices were synthesized by covalently attaching a precursor of ionic liquids (a silylated amine) to the silica and then reacting it with the anion of a conventional MALDI matrix material such as α-cyano-4-hydroxy cinnamic acid (CHCA) to form an ionic macro-complex. This new matrix material displayed at least two advantages. First, the immobilization of the CHCA did not impact the chromophore region of CHCA molecule, which retained its original maximum absorption band at 328 nm. This made the new matrix material compatible with standard MALDI-TOF mass spectrometers equipped with nitrogen lasers. Second, by covalently immobilizing the cationic portion of the ionic liquid moiety on the silica, it was possible to avoid low-mass chemical noise arising from the matrix in the positive-ion mode. The new matrix materials were based on silica gel and mesoporous silica, SBA-15. Their small molecule utility was investigated using two neurotransmitters, dopamine (153.08 Da) and serotonin (176.09 Da). The MALDI-TOF-MS analysis of the neurotransmitters demonstrated that the matrix material based on the modified mesoporous silica ([SBA-15-Si-NH 3 +][CHC −]) yielded spectra with minimal chemical noise and good analyte signal intensity. This was hypothesized to be due to the more efficient ionization facilitated by the larger surface area and spot uniformity of such a matrix material.

An incremental correlation approach to excited state energies based on natural transition/localized orbitals

A new incremental approach to the computation of vertical excitation energies is presented. The method works based on the definition of a dominant occupied orbital where the excitation takes place (natural transition orbital) and by localizing the remaining occupied space. The use of a reduced two-body expansion leads to a linear number of terms to be computed. A series of benchmark calculations have been carried out on small to medium sized photoactive systems. The results compare well to the full calculations, with maximum deviations of 0.3 eV, and an average absolute deviation of about 0.08 eV. In addition, a energy decomposition analysis is made on the basis of orbital distances to the chromophore region. First results indicate that orbitals beyond a relatively small radius can be safely neglected, leading to further drastic savings in the calculations.

Quantum Refinement of Protein Structures: Implementation and Application to the Red Fluorescent Protein DsRed.M1

Quantum refinement is an improvement upon the molecular mechanics (MM)-based crystallographic refinement. In the latter, X-ray data are supplemented with additional chemical information through MM force fields, whereas quantum refinement describes crucial regions of interest in the macromolecule by quantum mechanics (QM) instead of MM. In this paper, we report the implementation of quantum refinement in the ChemShell QM/MM framework and its application in an investigation of the chromophore structure of the red fluorescent protein DsRed.M1. Both mechanical and electrostatic QM/MM embedding schemes are implemented and tested. In the quantum refinement of DsRed.M1, the anionic red acylimine chromophore adopts a nearly orthogonal arrangement (rather than a cis or trans form), and the bond lengths in the acylimine moiety are more consistent with a phenolate (rather than a quinoid) structure. These findings are in contrast to the structure deduced from a standard crystallographic refinement (PDB: 2VAD), but in agreement with our earlier results from a purely theoretical QM/MM study. On the other hand, the quantum refinement of the anionic acylimine form of DsRed.M1 yields a hydrogen bonding network around the chromophore, especially with regard to the arrangement of the water molecules and the Glu148 residue, that is closer to the 2VAD structure than to the previously optimized QM/MM structure. In our earlier study the initial classical molecular dynamics (MD) simulations during QM/MM setup apparently exaggerated the mobility of the water molecules around the chromophore. On the basis of the present results, it seems likely that the Glu148 residue is protonated in the DsRed.M1 protein. The calculation of electronic excitation energies allows for further assessment of the proposed structures, especially in the chromophore region. Using a combination of density functional theory and multireference configuration interaction (DFT/MRCI), we find excellent agreement between experiment and theory only for the structures obtained from quantum refinement and from QM/MM optimization, but not for the 2VAD structure. The present case study on DsRed.M1 thus demonstrates the merits of combining reliable theoretical and experimental information in the determination of protein structures.

Ab initio theory for treating local electron excitations in molecules and its performance for computing optical properties

In this article, as a first step to develop an efficient approximation for predicting the molecular electronic excited state properties at ab initio level, we propose local excitation approximation (LEA). In the LEA scheme, the only local electron excitations within selected substructure (Chromophore) are treated to calculate the targeted excited state wavefunctions, whereas the other electron excitations (local electron excitations in other substructure and charge-transfer excitations between different regions) are simply discarded. This concept is realized by using the localized molecular orbitals (LMO) localizing on the chromophore substructure. If the targeted transitions show the strong local character and the adequate substructure is selected as chromophore region, the LEA scheme can provide excited state properties without large loss of accuracy. The fatal slowdown of convergence speed of Davidson's iterative diagonalization due to the use of LMO can be avoided by additional transformation of LMOs. To assess the accuracy and efficiency of the LEA scheme, we performed test calculations using various compounds at configuration interaction single (CIS) and time-dependent Hartree-Fock (TDHF) level of theory.

Monitoring Light-induced Structural Changes of Channelrhodopsin-2 by UV-visible and Fourier Transform Infrared Spectroscopy

Channelrhodopsin-2 (ChR2) is a microbial type rhodopsin and a light-gated cation channel that controls phototaxis in Chlamydomonas. We expressed ChR2 in COS-cells, purified it, and subsequently investigated this unusual photoreceptor by flash photolysis and UV-visible and Fourier transform infrared difference spectroscopy. Several transient photoproducts of the wild type ChR2 were identified, and their kinetics and molecular properties were compared with those of the ChR2 mutant E90Q. Based on the spectroscopic data we developed a model of the photocycle comprising six distinguishable intermediates. This photocycle shows similarities to the photocycle of the ChR2-related Channelrhodopsin of Volvox but also displays significant differences. We show that molecular changes include retinal isomerization, changes in hydrogen bonding of carboxylic acids, and large alterations of the protein backbone structure. These alterations are stronger than those observed in the photocycle of other microbial rhodopsins like bacteriorhodopsin and are related to those occurring in animal rhodopsins. UV-visible and Fourier transform infrared difference spectroscopy revealed two late intermediates with different time constants of tau = 6 and 40 s that exist during the recovery of the dark state. The carboxylic side chain of Glu(90) is involved in the slow transition. The molecular changes during the ChR2 photocycle are discussed with respect to other members of the rhodopsin family.

Syntheses and Chiroptical Properties of Optically Active Helical Poly(phenylacetylene)s Bearing [60]Fullerene Pendants

Two novel C60-bound chiral (3) and achiral (2) phenylacetylenes were synthesized by the treatment of C60 with (R)-N-[1-(4-ethynylphenyl)ethyl]glycine and N-(4-ethynylbenzyl)glycine by the Prato reaction in the presence of paraformaldehyde and dipentadecyl ketone, respectively. The homopolymerization of the achiral 2 bearing long alkyl chains and copolymerization with optically active phenylacetylenes including 3 using a rhodium catalyst in chloroform homogeneously occurred, giving the C60-containing helical poly(phenylacetylene)s soluble in chloroform, while the homopolymers of the analogous achiral C60-bound phenylacetylenes with no alkyl chain (1) and 3 were totally insoluble in common organic solvents. The obtained copolymers exhibited an induced circular dichroism (ICD) both in the main-chain region and in the fullerene chromophoric region, indicating that the optically active copolymers possess a preferred-handed helical conformation and that the pendant fullerene groups are arranged in helical arrays with a predominant screw-sense along the polymer backbones. The formation of a hierarchical supramolecular assembly of the homopolymers of 1 and 3 bearing fullerene pendants on each repeating unit was also studied by electron microscopy.

X-Ray Crystallographic Analysis of 9-cis-Rhodopsin, a Model Analogue Visual Pigment†

Recent progress in high-resolution structural study of rhodopsin has been enabled by a novel selective extraction procedure with rod photoreceptor cells. In this study, we applied the method for rapid and efficient preparation of a purified analogue pigment using bovine rod outer segment membranes with 9-cis-retinal. After complete bleaching of the membranes and subsequent regeneration with the exogenous retinal, 9-cis-rhodopsin is selectively extracted from the membranes using combination of zinc and heptylthioglucoside. The solubilized sample, even with a small amount of contaminating retinal oximes, is shown to be pure enough for three-dimensional crystallization. The X-ray diffraction from 9-cis-rhodopsin crystals was examined and the electron density map at 2.9 angstroms resolution in the chromophore region can be fitted well with the model of 9-cis-retinal Schiff base.

Supramolecular Helical Assembly of an Achiral Cyanine Dye in an Induced Helical Amphiphilic Poly(phenylacetylene) Interior in Water

A water-soluble amphiphilic poly(phenylacetylene) bearing the bulky aza-18-crown-6-ether pendants forms a one-handed helix induced by l- or d-amino acids and chiral amino alcohols through specific host-guest interactions in water. We now report that such an induced helical poly(phenylacetylene) with a controlled helix sense can selectively trap an achiral benzoxazole cyanine dye among various structurally similar cyanine dyes within its hydrophobic helical cavity inside the polymer in acidic water, resulting in the formation of supramolecular helical aggregates, which exhibit an induced circular dichroism (ICD) in the cyanine dye chromophore region. The supramolecular chirality induced in the cyanine aggregates could be further memorized when the template helical polymer lost its optical activity and further inverted into the opposite helicity. Thereafter, thermal racemization of the helical aggregates slowly took place.