Cholesteric Research Articles

Three-Level Chirality Transfer and Amplification in Liquid Crystal Supramolecular Assembly for Achieving Full-Color and White Circularly Polarized Luminescence.

Chiral liquid crystal supramolecular assembly provides an ideal strategy for constructing excellent circularly polarized luminescence (CPL) materials. However, the chirality transfer in chiral liquid crystals normally occurs at two levels from the configurational chirality to the supramolecular phase chirality. The more precise and more levels of chirality transmission are fascinating but remain challenging. The present work reports the first success of three-level chirality transfer and amplification from configurationally point chirality of small molecules to conformationally helical chirality of helical polymers and finally to supramolecular phase chirality of cholesteric liquid crystals composed of chiral nonfluorescent polymers (P46) and nematic liquid crystals. Noticeably, the helical twisting power of P46 is five-fold larger than its monomer. Full-color and white CPL with maximum luminescence dissymmetry factor up to 1.54 and photoluminescence quantum yield up to 63.8% are realized utilizing helical supramolecular assembly combined with selective reflection mechanism. Also significantly, the electrically stimuli-responsive CPL switching device as well as anti-counterfeiting security, information encryption, and chiral logic gate applications are developed. This study deepens the understanding of chirality transfer and amplification across different hierarchical levels.

Biomimetic Structural Hydrogels Reinforced by Gradient Twisted Plywood Architectures.

Naturally structural hydrogels such as crustacean exoskeletons possess a remarkable combination of seemingly contradictory properties: high strength, modulus, and toughness coupled with exceptional fatigue resistance, owing to their hierarchical structures across multiple length scales. However, replicating these unique mechanical properties in synthetic hydrogels remains a significant challenge. This work presents a synergistic approach for constructing hierarchical structural hydrogels by employing cholesteric liquid crystal self-assembly followed by nanocrystalline engineering. The resulting hydrogels exhibit a long-range ordered gradient twisted plywood structure with high crystallinity to mimic the design of crustacean exoskeletons. Consequently, the structural hydrogels achieve an unprecedented combination of ultrahigh strength (46±3MPa), modulus (496±25MPa), and toughness (170±14MJ m-3), together with recorded high fatigue threshold (32.5kJ m-2) and superior impact resistance (48±2kJ m-1). Additionally, through controlling geometry and compositional gradients of the hierarchical structures, a programmable shape morphing process allows for the fabrication of complex 3D hydrogels. This study not only offers valuable insights into advanced design strategies applicable to a broad range of promising hierarchical materials, but also pave the ways for load-bearing applications in tissue engineering, wearable devices, and soft robotics.

Enhanced electrically-induced bandwidth broadening via stratification of polymer stabilized cholesteric liquid crystals

Enhanced electrically-induced bandwidth broadening via stratification of polymer stabilized cholesteric liquid crystals

Simultaneous monitoring of humidity and temperature by polarization volume gratings utilizing responsive cholesteric liquid crystals

Simultaneous monitoring of humidity and temperature by polarization volume gratings utilizing responsive cholesteric liquid crystals

Sign Inversion of Circularly Polarized Luminescence in Cholesteric Liquid Crystals Induced by Mercury Ions through Binaphthyl Dopants′ Conjugation Control

AbstractStimuli‐responsive circularly polarized luminescence (CPL) materials based on cholesteric liquid crystal (CLC) platforms show great promise for applications in information encryption and anticounterfeiting. In this study, we constructed a mercury ion‐responsive CPL system in CLCs by controlling the conjugation degree of axially chiral binaphthyl derivatives. Two chiral binaphthyl derivatives (R/S‐1 and R/S‐2) were initially used as chiral dopants to demonstrate that CPL inversion (glum values from 0.5/‐0.44 to −0.53/0.48) in CLCs could be achieved by modulating the conjugation degree of the chiral binaphthyls. Based on this concept, the thioacetal binaphthyl R‐2S was developed and used as a mercury‐responsive chiral dopant in CLCs. Under Hg ion treatment, the CPL sign inverted (glum value changed from 0.22 to −0.29) due to the transformation of the thioacetal into an aldehyde group. Additionally, the mercury ion‐responsive CPL material was applied in information encryption.

Temperature‐Tunable Cholesteric Liquid Crystal Optical Combiners for Extended Reality Applications

Recent advancements in extended reality (XR) showcase their potential ability to enhance the user experience of traditional displays such as liquid crystal displays and organic light‐emitting diode screens. To achieve this goal, the upcoming generation of head‐mounted displays (HMDs) necessitates a seamless transition between different XR modes, including augmented reality (AR) and virtual reality (VR) modes. Herein, an innovative cholesteric liquid crystal‐ (CLC‐) based optical combiner for HMDs is introduced. This approach enables the display device to switch between AR, VR, and transparent modes via temperature modulation. Since CLC materials demonstrate varying optical properties at different temperatures, a real‐time temperature monitoring system that is paired with an external controller is integrated. This allows for dynamic temperature adjustments of the optical combiner and enables smooth transitions between display modes. Furthermore, the Berreman 4 × 4 matrix method is used to simulate the optical properties of the optical combiner, finding strong agreement with the experimental results. The performance of the tunable optical combiners using 450, 532, and 635 nm laser sources is explored. The findings demonstrate that CLC‐based optical combiners can effectively switch between the three distinct modes at corresponding temperatures, paving the way for versatile applications in future HMDs.

Direct Ink Writing of Cephalopod Skin‐Like Core‐Shell Fibers From Cholesteric Liquid Crystal Elastomers and Dyed Solutions

AbstractDirect ink writing (DIW) of core‐shell structures allows for patterning hollow or composite structures for shape morphing and color displays. Cholesteric liquid crystal elastomers (CLCEs) with liquid crystal mesogens assembled in a helix superstructure are attractive for generating tunable iridescent structural colors. Here, by fine‐tuning the rheology of the core and shell materials, respectively, this study creates droplets or a continuous filament in the core from the precursors of polydimethylsiloxane (PDMS) or poly(vinyl alcohol), whereas CLCE forms the outer shell. By introducing a dye in the droplets, the skin structures of cephalopods, consisting of chromatophores and iridocytes, are mimicked for enhanced color saturation, lightness, and camouflage. After removal of the core material, a CLCE hollow fiber is obtained, which can switch colors upon mechanical stretching and pneumatic actuation, much like papilla along with iridocytes. Further, liquid crystal mesogens assembled in the bulk of the fiber are in polydomain. Thus, the skin appears opalescent at room temperature, much like how leucophores enhance reflectins. Upon heating above the nematic to isotropic transition temperature, the skin becomes transparent. Lastly, a cephalopod model is constructed, where different parts of the model can change colors independently based on different mechanisms.

Overlooked Ionic Contribution of a Chiral Dopant in Cholesteric Liquid Crystals.

This study focuses on the ionic contribution by a chiral dopant added into a nematic host for preparing cholesteric liquid crystals (CLCs). Chiral structures were designated by individually incorporating two enantiomers, R5011 and S5011, into the nematic E44 to construct right- and left-handed CLCs, respectively. Characterized by the space-charge polarization, the dielectric spectra of the CLCs were investigated in the low-frequency regime, where f ≤ 1 kHz. The role of the individual chiral dopant, R5011 or S5011, at concentrations of 0-4.0 wt.% in altering the ionic properties of the CLC material was analyzed by deducing the electrical conductivity, ion density, and ion diffusivity. Regardless of the cell structure to be antiparallel or twisted by 90°, a significant ionic response was observed in the right-handed CLCs in comparison with the left-handed counterparts, suggesting that excess ions originating from our R5011 were introduced into the mesogenic mixtures. This work alarms the potential contribution of notorious impurity ions by a chiral dopant, which is often ignored in fabricating CLCs for electro-optical applications.

Circularly Polarized Organic Ultralong Room‐Temperature Phosphorescence: Generation, Enhancement, and Application

AbstractCircularly polarized luminescent (CPL) materials have garnered tremendous attention owing to their expanded optical properties beyond emission wavelength and intensity. Among these, the emerging circularly polarized organic ultralong room‐temperature phosphorescence (CP‐OURTP) materialsdemonstrating elegant and distinct features are of significant importance for their extended emission lifetime, which represent a novel frontier in research with promising scientific and technological applications across diverse fields. This review systematically outlines the traditional strategies to achieve CP‐OURTP including organic crystals, copolymerization, host–guest doping, a combination of the copolymerization and host–guest doping, spinning and twisting technology, and supramolecular polymer assembly. Importantly, the recent significant progress of CP‐OURTP in the chiral soft materials, such as liquid crystals (LCs) involving lyotropic LCs (cellulose nanocrystals, CNCs) and chiral thermotropic LCs (cholesteric LCs and chiral LC elastomers), is showcased. Finally, the practical applications of CP‐OURTP materials are summarized, and the review concludes with the perspectives on the current challenges and future opportunities for CP‐OURTP materials. This review aims to inspire the further innovations in the fabrication of advanced CP‐OURTP materials and enrich their promising applications.

Local Orientation Transitions to a Lying Helix State in Negative Dielectric Anisotropy Cholesteric Liquid Crystal

Orientation transitions in a cholesteric liquid crystal (CLC) layer with negative dielectric anisotropy, under the influence of a non-uniform spatially periodic electric field created using a planar system of interdigitated electrodes, were studied experimentally and numerically. In the interelectrode space, transitions are observed from a planar Grandjean texture, with the helix axis perpendicular to the layer plane, to states with a lying helix, when the helix axis is parallel to the layer plane and perpendicular to the electrode stripes. It was found that the relaxation time of the induced state in the Grandjean zones, corresponding to two or more half-turns of the helix, significantly exceeded the relaxation time for the first Grandjean zone with one half-turn. An analysis of experimentally observed and numerically simulated textures shows that slow relaxation to the initial state in the second Grandjean zone, as well as in higher-order zones, is associated with the formation of local topologically equivalent states. In these states, the helix has a reduced integer number of helix half-turns throughout the layer thickness or unwound into the planar alignment state.

Enhanced Laser Emission by Incorporating Helically Twisted Silver Nanoflakes within Polymer-Stabilized Cholesteric Liquid Crystals

Enhanced Laser Emission by Incorporating Helically Twisted Silver Nanoflakes within Polymer-Stabilized Cholesteric Liquid Crystals

Propagation of periodic director and flow patterns in a cholesteric liquid crystal under electroconvection

The electroconvection of liquid crystals is a typical example of a dissipative structure generated by complicated interactions between three factors: convective flow, structural deformation, and the migration of charge carriers. In this study, we found that the periodic structural deformation of a cholesteric liquid crystal propagates in space, like a wave, under an alternating-current electric field. The existence of convection and charge carriers was confirmed by flow-field measurements and dielectric relaxation spectroscopy. Given that the wave phenomenon results from electroconvection, we suggest a possible model for describing the mechanism of wave generation. The validity of the model was examined using the Onsager variational principle. Consequently, it was suggested that wave generation can be described by four effects: the electrostatic potential, mixing entropy, anisotropic friction due to charge migration, and viscous dissipation of the liquid crystal.

Multi-stage and multi-colour liquid crystal reflections using a chiral triptycene photoswitchable dopant.

The photomodulation of the helical pitch of cholesteric liquid crystals results in dynamic and coloured canvases that can potentially be used in applications ranging from energy-efficient displays to colour filters, anti-counterfeiting tags and liquid crystal (LC) lasers. Here we report on the analysis of a series of photoswitchable chiral dopants that combine the large geometrical change and bistability of hydrazone switches with the efficient helical pitch induction of the chiral motif, triptycene. We elucidate the effects that conformational flexibility, dispersion forces and π-π interactions have on the chirality transfer ability of the dopant. We then use the irradiation time with visible light (442 nm) combined with a simple digital light processing microscope projection set-up to draw numerous stable multi-coloured images on an LC canvas, showcasing the fine control this dopant yields over the LC assembly.

Color-Tunable Lead Halide Perovskite Single-Mode Chiral Microlasers with Exceptionally High glum.

Chiral microlasers hold great promise for optoelectronics from integrated photonic devices to high-density quantum information processing. Despite significant progress in lead-halide perovskite emitters, chiral lasing with high dissymmetry factors (glum) has not yet been realized. Here, we demonstrate chiral single-mode microlasers with exceptional stability and tunable emission across the visible range by combining CsPbClxBr3-x perovskite microrods (MRs) with a cholesteric liquid crystal (CLC) layer. The MRs lase via a whispering gallery mode (WGM) microcavity and confer chirality through the encapsulated CLC layer, thus exhibiting circularly polarized lasing with dissymmetry factors reaching 1.62. Importantly, we demonstrate wavelength-tunable high dissymmetry chiral lasers in a broad spectral range by tuning the halide composition and using CLC layers with the desired photonic bandgap (PBG). This facile approach to generate chiral lasing not only is applicable to semiconductor nano- and microcrystals but also paves the way for potential integration into nanoscale photonic devices.

Polymer-stabilized cholesteric liquid crystals with multi-state reversibility for applications in advanced smart adjustable anti-counterfeiting and energy-saving displays

The creation of an anti-counterfeiting material with reflection color, fluorescence, infrared imaging, and electrical property information will increase the level of anti-counterfeiting. However, the creation of such a material has proved to be extremely challenging. In this study, twin anti-counterfeiting labels with intelligently tunable patterns were obtained through a strategy of PMMA loaded chiral molecules via diffusing on the micrometer scale. In order to enhance anti-counterfeiting ability, the multi-mode intelligently modulated advanced anti-counterfeiting material was obtained through the strategy of introducing photo-isomerizing dithienylethene and infrared-shielding Cs0.33WO3 nanoparticles. This material can be reversibly converted into fluorescent, reflected colors, infrared, and electrical characteristic signals. The encrypted information is displayed with red fluorescence under UV light irradiation. Furthermore, the encrypted information can be reversibly displayed and erased under repeated stimulation by voltage and pressure, heating and cooling, UV, visible and near infrared (NIR) light. The aim of our work is to create a simple method to prepare complex patterns of structural and fluorescent color anti-counterfeiting films with the improved anti-counterfeiting capability. Based on this, the strategy of co-doping fluorescent molecules and photochromic molecules in liquid crystals combined with etching technology has realized a multiple anti-counterfeiting mode with a higher level of security. The advanced multiple anti-counterfeiting mode can output encrypted information of multiple states which will greatly improve the level of anti-counterfeiting. In terms of display, we obtained billboards with complex patterns, price intelligently tunable and full-color display by diffusion S5011 in liquid crystals, thus extending their application in the field of electronic shelf labels.

A compact, highly sensitive optical fiber temperature sensor based on a cholesteric liquid crystal polymer film

A compact, highly sensitive optical fiber temperature sensor based on a cholesteric liquid crystal polymer film

Cholesteric Liquid Crystal Mirror-Based Smart Window Controlled with Ambient Temperature

In this paper, the authors demonstrate a small prototype of a smart window based on the thermo-optical properties of cholesterol liquid crystals. Due to its polymer-free design, the manufactured smart window is transparent and can reflect certain portions of visible or infrared light without requiring an external power source, and thus is easier to install and operate. The proposed smart window technology based on a cholesteric liquid crystal mirror will reduce energy consumption costs by reflecting excess sunlight and heat transfer, increasing comfort for residents of buildings and structures.

Enhanced cone-shaped lasing from cholesteric liquid crystals.

Strong conical lasing in the violet-blue range of the spectrum from dye doped cholesteric liquid crystals is obtained. In contrast to the previously reported cases, the cone laser emission is sharply increased at the local maximums of the luminescence peaks of the dyes. Besides that, for obtaining the cone lasing strong focusing of the pumping beam is not required. Extremely low pump density is achieved for the cholesteric liquid crystal lasers. It is important that the cone lasing can be observed without simultaneous manifestation of any other laser emissions.

Tunable Helix Inversion and Circularly Polarized Luminescence in Cholesteric Liquid Crystal Copolymers with Room-Temperature Phosphorescence

Tunable Helix Inversion and Circularly Polarized Luminescence in Cholesteric Liquid Crystal Copolymers with Room-Temperature Phosphorescence

Sign Inversion of Circularly Polarized Luminescence in Cholesteric Liquid Crystals Induced by Mercury Ions through Binaphthyl Dopants' Conjugation Control.

Stimuli-responsive circularly polarized luminescence (CPL) materials based on cholesteric liquid crystal (CLC) platforms show great promise for applications in information encryption and anticounterfeiting. In this study, we constructed a mercury ion-responsive CPL system in CLCs by controlling the conjugation degree of axially chiral binaphthyl derivatives. Two chiral binaphthyl derivatives (R/S-1 and R/S-2) were initially used as chiral dopants to demonstrate that CPL inversion (glum values from 0.5/-0.44 to -0.53/0.48) in CLCs could be achieved by modulating the conjugation degree of the chiral binaphthyls. Based on this concept, the thioacetal binaphthyl R-2S was developed and used as a mercury-responsive chiral dopant in CLCs. Under Hg ion treatment, the CPL sign inverted (glum value changed from 0.22 to -0.29) due to the transformation of the thioacetal into an aldehyde group. Additionally, the mercury ion-responsive CPL material was applied in information encryption.