Chitosan-poly Vinyl Alcohol Research Articles

Biocompatible Pickering emulsions and films: Unlocking the chitosan-polyvinyl alcohol synergy for multifaceted capabilities

The exciting potential of harnessing the synergy between polysaccharides and bioactive components is attracting significant scientific interest. This research paves the way for the development of novel materials that can improve human health. Therefore, current research is conducted to explore the innovative use of chitosan, polyvinyl alcohol (PVA) complex (CHN-PVA), olive oil-stabilized Pickering emulsions (PEs), and films with multifaceted applications. The sonication stabilized Pickering emulsions (PEs at different pH values 3, 5, 7, 9, and 11) exhibited decrease in particle size compared to control PEs. The pH significantly impacted the zeta potential of PEs. Fourier-transform infrared spectroscopy (FTIR) confirmed the non-covalent linkages. The antibacterial activity of the PEs revealed greater efficacy against gram-positive bacteria than gram-negative bacteria. The CHN-PVA synergy greatly impacted the mechanical properties of films, resulting in tremendous increase of tensile strength and elongation at break compared to CHN film. The PEs efficiently delivered quercetin at neutral pH. The electro spraying of PEs significantly extended strawberry shelf life. Finally, the films exhibited promising properties of adsorbent and the results depicted that pH had a significant impact on methylene blue removal. Conclusively, this investigation underscores the potential of CHN-PVA films in food, health, and environmental fields.

Enhancing uranium ion adsorption in wastewater: The role of PEI-PVA/CS xerogel

In the process of recovering uranium resources from uranium-containing wastewater (UCW) via adsorption methods, it is imperative to address challenges related to the stability and selectivity of adsorbents in the separation of uranium ions. Xerogel porous adsorbents have garnered significant research interest for their potential application in uranium ion adsorption, owing to their high porosity, robust plasticity, and abundant functional groups. Based on the efficient separation of uranium by acid-resistant polyvinyl alcohol/chitosan (PVA/CS) xerogel, polyethyleneimine (PEI) was selected to adjust its pores. By examining the characteristics of the modified xerogel both prior to and following U(VI) adsorption, optimizing the conditions for its U(VI) adsorption, and analyzing the separation mechanism of U(VI), the results demonstrate that PEI can effectively modify the pore environment of PVA/CS xerogel. Furthermore, PEI-PVA/CS xerogel maintains consistent U(VI) separation efficacy in UCW across a pH range of 2–7. After five cycles of uranium desorption and adsorption, the adsorption recovery capacity exceeds 97.7 %, with minimal interference from cations. The synergistic effect of -NH2 and -OH functional groups is responsible for the efficient separation of U(VI) by PEI-PVA/CS xerogel. This xerogel demonstrates the stability and selectivity required for U(VI) adsorbents, indicating its potential for engineering applications in UCW treatment.

Arginine-Biofunctionalized Ternary Hydrogel Scaffolds of Carboxymethyl Cellulose–Chitosan–Polyvinyl Alcohol to Deliver Cell Therapy for Wound Healing

Wound healing is important for skin after deep injuries or burns, which can lead to hospitalization, long-term morbidity, and mortality. In this field, tissue-engineered skin substitutes have therapy potential to assist in the treatment of acute and chronic skin wounds, where many requirements are still unmet. Hence, in this study, a novel type of biocompatible ternary polymer hybrid hydrogel scaffold was designed and produced through an entirely eco-friendly aqueous process composed of carboxymethyl cellulose, chitosan, and polyvinyl alcohol and chemically cross-linked by citric acid, forming three-dimensional (3D) matrices, which were biofunctionalized with L-arginine (L-Arg) to enhance cellular adhesion. They were applied as bilayer skin biomimetic substitutes based on human-derived cell cultures of fibroblasts and keratinocytes were seeded and grown into their 3D porous structures, producing cell-based bio-responsive hybrid hydrogel scaffolds to assist the wound healing process. The results demonstrated that hydrophilic hybrid cross-linked networks were formed via esterification reactions with the 3D porous microarchitecture promoted by foam templating and freeze-drying. These hybrids presented chemical stability, physicochemical properties, high moisture adsorption capacity, surface properties, and a highly interconnected 3D porous structure well suited for use as a skin substitute in wound healing. Additionally, the surface biofunctionalization of these 3D hydrogel scaffolds with L-arginine through amide bonds had significantly enhanced cellular attachment and proliferation of fibroblast and keratinocyte cultures. Hence, the in vivo results using Hairless mouse models (an immunocompromised strain) confirmed that these responsive bio-hybrid hydrogel scaffolds possess hemocompatibility, bioadhesion, biocompatibility, adhesiveness, biodegradability, and non-inflammatory behavior and are capable of assisting the skin wound healing process.

Preparation of Polyvinyl Alcohol–Chitosan Nanocellulose–Biochar Nanosilver Composite Hydrogel and Its Antibacterial Property and Dye Removal Capacity

In this research, silver-loaded biochar (C-Ag) was acquired from a waste fish scale, and nanocellulose (CNF) was prepared from the waste wheat stalk. Then C-Ag was loaded into chitosan-polyvinyl alcohol hydrogel (CTS-PVA) with CNC as a reinforcement agent, and a novel nanocomposite material was acquired, which could be efficiently applied for antibacterial and dye removal. By plate diffusion analysis, the inhibition areas of C-Ag-CTS-PVA-CNF (C/CTS/PVA/CNF) hydrogel against E. coli ATCC25922, S. aureus ATCC6538, and P. aeruginosa ATCC9027 could reach 22.5 mm, 22.0 mm, and 24.0 mm, respectively. It was found that the antibacterial rate was 100% in the water antibacterial experiment for 2 h, and the antibacterial activity was more than 90% within 35 days after preparation, and the antibacterial rate was more than 90% after repeated antibacterial tests for five times. Through swelling, water adsorption, water loss rate, and water content tests, the hydrogel manifested good moisturizing properties and could effectually block the loss of water and improve the stability of the C/CTS/PVA/CNF hydrogel. The pseudo-first-order and pseudo-second-order models were built, and the adsorption capacity of hydrogel to dye was analyzed, and the dye removal was more consistent with the pseudo-first-order kinetic model. The best removal effect for Congo red was 96.3 mg/g. The C/CTS/PVA/CNF hydrogel had a remarkable removal efficacy on Malachite green, Methyl orange, Congo red, and Methylene blue. As a result, the C/CTS/PVA/CNF hydrogels had robust antibacterial properties and reusability. In addition, the present research developed a facile strategy for effectual dyes removal from the aqueous medium.

Novel pervaporation separation of PVA/CS blend membranes for the removal of DMF from industrial wastewater

AbstractAchieving satisfactory separation of N, N‐Dimethylformamide (DMF)/water is still challenging in industrial wastewater treatment. To address this issue, a novel method involving pervaporation (PV) separation using polyvinyl alcohol/chitosan (PVA/CS) blend films is proposed. Various characterization methods confirmed the strong compatibility between PVA and CS, and the blending improved their mechanical properties and thermal stability. Heat treatment significantly reduced the swelling degree of the membranes. In a binary aqueous system with low concentrations of DMF, controlled separation can be achieved by adjusting the blending ratio of PVA to CS. The membranes exhibited preferential selectivity for DMF when the CS content is 40–75 wt%, which allowed for the concentration and recovery of DMF. At 20 °C with a feed of 10 wt% DMF solution, 2 h heat‐treated PVA/CS‐50 membrane exhibited the best performance, which could be attributed to its strong hydrogen bonding force, with a total flux of 484.09 g m−2 h−1 and a separation factor of 5.41 for DMF. The PVA/CS blend membranes exhibit excellent acid and alkali resistant and are promising candidates for the separation and recovery of DMF from industrial wastewater by membrane technology.

Design and in vitro/in vivo evaluation of chitosan-polyvinyl alcohol copolymer material cross-linked by dynamic borate ester covalent for pregabalin film-forming delivery system

This research introduced a novel polymer synthesized by combining chitosan and modified polyvinyl alcohol, cross-linked with boric acid using dynamic covalent bonds. The polymer was developed to formulate a pregabalin Film-forming system (FFS) for treating postherpetic neuralgia via topical application, showcasing notable skin adhesion and drug delivery properites. The chitosan-boric acid-modified polyvinyl alcohol polymer was analyzed using NMR, FTIR. The exceptional features of the optimized FFS were evaluated through rheometer, Differential scanning calorimetry (Tg = 45.98 °C), contact angle (θ = 78.62°). The elongation (60.05 ± 3.67 %), cohesion (56.94 ± 4.65 MPa) and skin adhesion (58.12 ± 2.99 kPa) of chitosan-boric acid-modified polyvinyl alcohol were found to be 5.2, 6.8, and 8.3 times higher than those of the pure chitosan film, attributed to the double network structure formed by the cross-linked reversible dynamic covalent bond. The optimized pregabalin FFS exhibited increased in vitro (86.25 ± 1.87 μg/g) and in vivo (100.42 ± 7.44 μg/g) skin retention amounts compared to in vivo oral administration (28.43 ± 4.61 μg/g). In summary, the utilization of borate ester dynamic covalent bonds in developing chitosan-based film-forming polymer proved beneficial in improving skin adhesion and topical therapeutic effectiveness, thereby mitigating the risk of systemic side effects associated with oral administration.

Bimetallic Fe/Co-MOF dispersed in a PVA/chitosan multi-matrix hydrogel as a flexible sensor for the detection of lactic acid in sweat samples.

Anovel bimetallic Fe/Co-metal-organic framework (MOF) hydrogel-based wearable sweat sensorwas developed. Morphological and structural analysis of the hydrogel shows uniformly sized spines and spindle-shaped particles of the Fe/Co-MOF, and it has a high surface area (132.306 m2g-1) and porosity (0.059 cm3g-1) as confirmed by Brunauer-Emmett-Teller (BET) studies. The integration of the bimetallic MOF into a polyvinyl alcohol/chitosan (PVA/CS)-mixed matrix resulted in a multiple network hydrogel. The optimisation study investigated the effects of different pH of the PBS electrolyte, scan rates, and accumulation time in voltammetry. The electrochemical methods such as cyclic voltammetry (CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy (EIS) provided information on the redox behaviour, electrochemical stability, and catalytic activity of the hydrogel. The sensor demonstrates a wide linear detection range from 0.05µM to 100mM, a superior sensitivity of 0.02mAmM-1cm-2, and a lower limit of detection of 0.01µM . Active sites distributed over the hydrogel surface, specifically Fe2+ and Co2+ within the MOF structure, catalyse the oxidation of L-lactic acid, resulting in electron transfer and the formation of pyruvic acid. Notably, the fabricated sensor exhibits high selectivity, effectively discriminating against interfering species such as uric acid, ascorbic acid, glucose, urea, dopamine, NaCl, and CaCl2. Real-time analysis conducted in a simulated sweat sample via the standard addition method resulted in good recovery percentages of a minimum of 98%. The work presented here is a versatile and simple platform for point-of-care testing, especially for athletes and military personnel.

Sustainable solution for wastewater management: Fabrication of cost-effective β-cyclodextrin incorporated chitosan polyvinyl alcohol composite hydrogel film for the efficient adsorption of anionic congo red and tartrazine dyes

Dyes are an integral part of leather, textiles, food, and packaging materials, providing aesthetic appeal to the finished article. These industries use large amounts of water, creating wastewater with harmful, toxic, and hazardous pollutants, posing significant health and environmental risks to the public and ecological system. Therefore, to resolve this issue, a superabsorbent β-cyclodextrin incorporated chitosan polyvinyl alcohol cross-linked with citric acid composite hydrogel film (β-CD/Ch/PVA) has been developed for the effective adsorption of congo red (CR) and tartrazine dyes (TG). The Fourier-transform infrared spectroscopic (FTIR) analysis confirmed the presence of –OH, –NH2 functional groups in hydrogel film. The rough surface morphology was obtained through Field emission scanning electron microscopic (FESEM) analysis. Brunauer-Emmett-Teller (BET) method gave the surface area of hydrogel, which is 17.34 m2/g with pore diameter of 4.12 nm, indicating its mesoporous nature. Adsorption parameters like contact time, temperature, pH, initial concentration of dyes, and dosage of hydrogel have been optimized by batch adsorption studies and the Box-Behknen Design Model. In batch experiments, the hydrogel film effectiveness was confirmed, achieving high removal efficiencies of 95.38 % and 96.3 % for CR and TG dyes at pH 7 and 6, respectively. The adsorption process followed the pseudo-second-order kinetics and Langmuir model at room temperature for both dyes, and the maximum adsorption capacity was found to be 366.34 mg/g, 1436.04 mg/g for CR and TG dyes, respectively. The thermodynamic study revealed that the adsorption of dyes was spontaneous and endothermic in nature. The electrostatic interactions and hydrogen bonding between the hydrogel and dye molecules were responsible for the adsorption. This hydrogel film can be reused for 5 consecutive adsorption–desorption cycles for both dyes, maintaining upto 85 % in removal efficiency. Hence, the synthesized β-cyclodextrin incorporated chitosan polyvinyl alcohol composite hydrogel film holds great potential for the remediation of wastewater effluents and addressing environmental issues.

Polyvinyl alcohol-chitosan based oleanolic acid nanofibers against bacterial infection: In vitro studies and in vivo evaluation by optical and laser Doppler imaging modalities

The present work focuses on the fabrication of polyvinyl alcohol-chitosan-loaded oleanolic acid-nanofibers (PVA-CS-OLA-NFs) for bacterial infection. The prepared PVA-CS-OLA-NFs were characterized for contact angle, SEM, AFM, XRD, FTIR, and TGA. The solid-state characterization and in vitro performance evaluation of nanofibers reveal consistent interconnection and diameters ranging from 102 ± 9.5 to 386 ± 11.6 nm. The nanofibers have a flat surface topography and exhibit efficient drug entrapment. Moreover, the in vitro release profile of PVA-CS-OLA-NFs was found to be 51.82 ± 1.49 % at 24 h. Furthermore, the hemocompatibility study showed that the developed PVA-CS-OLA-NFs are non-hemolytic to human blood. The PVA-CS-OLA-NFs demonstrate remarkable antibacterial capabilities, as evidenced by their MBC and MIC values, which range from 128 and 32 μg/mL, against the strains of S. aureus. The in-vivo fluorescence optical imaging showed the sustained PVA-CS-OLA-NFs release at the wound site infected with S. aureus for a longer duration of time. Moreover, the PVA-CS-OLA-NFs showed superior wound healing performance against S. aureus infected wounds compared to the marketed formulation. Further, the laser Doppler imaging system improved oxygen saturation, blood supply, and wound healing by providing real-time blood flow and oxygen saturation information.

Proton conductivity and dielectric studies on chitosan/polyvinyl alcohol blend electrolytes: Synergistic improvements with ionic liquid and graphene oxide

This study investigates the impact of ionic liquid, 1-methylimidazolium tetrafluoroborate (IL) and graphene oxide (GO) on the performance of chitosan/polyvinyl alcohol (CS/PVA)-based composite electrolytes. Fourier-transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) confirm the successful incorporation of IL and GO, affecting the structural and morphological properties of the electrolytes. Thermogravimetric analysis (TGA) reveals enhanced thermal stability in GO-doped samples, with increased residual weight at high temperatures, while IL addition leads to higher initial weight loss due to its hygroscopic nature. Ionic conductivity measurements demonstrate that the CS/PVA/IL-GO(4.0) composite achieves the highest proton conductivity of 1.76 × 10−3 S/m at 300 K and 1 MHz, surpassing other samples and aligning with top values reported in literature. Dielectric studies show a significant increase in dielectric constant to 9.55 × 104 at 300 K and 20 Hz for CS/PVA/IL-GO(4.0), attributed to enhanced dipole alignment and polarization effects. The loss tangent analysis indicates the shortest relaxation time of 2.07 × 10−4 s for CS/PVA/IL-GO(4.0), correlating with its superior proton conductivity. These findings highlight the potential of CS/PVA/IL-GO electrolytes for advanced energy storage and conversion applications, suggesting further research into GO dispersion and long-term stability for optimized performance in practical devices.

Using natural antioxidant Rhubarb extracts in PVA/chitosan bio-adsorbent films for efficient removal of cationic and anionic dyes from polluted water

In this research, sustainable membrane films were developed for removal of cationic and anionic dyes from wastewater based on polyvinyl alcohol/chitosan (PVA/CS) incorporated with natural antioxidant Rhubarb dye (Rh) extracts. Rh dye was extracted from Rhubarb roots by a green method. Three different quantities of Rh dye extracts (i.e., 2.5, 5, and 10 %) were used to fabricate crosslinked PVA/CS films by solvent-casting approach. The fabricated films subjected to different techniques such as X-ray diffraction (XRD), scanning electron microscopy combined with energy dispersive X-ray spectroscopy (SEM-EDX), dynamic mechanical analysis (DMA), as well as antioxidant activity. In all cases, the incorporation of Rh dye extracts inside the composite improved the crystallinity, biocompatibility, stress–strain properties, besides the DPPH scavenging activity reached 42.50 % for PVA/CS-10 % Rh membrane compared to PVA/CS blank (i.e., ∼ 2.10 %). Dyes adsorption including different cationic and anionic dyes implemented for all selected membranes. The data revealed that the membrane containing 10 % Rh dye was the optimum for removal of malachite green oxide (MG, 93 %) as cationic dye and methyl orange (MO, 95.70 %) as anionic dye. Moreover, the kinetics of the removal process exhibited that this process followed the Langmuir, Freundlich, Temkin, Dubinin-Radushkevich models, and the pseudo-1st order kinetic model, with an R2 of 0.998 and 0.943 for MG and MG, respectively. Whereas, the adsorption process corresponded to the Freundlich isotherm model, with coefficients R2 was of 0.989 and 0.988 for MO and MG, respectively. Other parameters including dye concentration, contacting time, pH media, and kinetic studies were also applied on PVA/CS-10 % Rh membrane.

Antibacterial Properties of Dandelion Extract-Based PVA/CTS/DAN/CuNP Composite Gel

Dandelion extract is a reducing agent, and CuSO4∙5H2O was used as a carrier to create copper nanoparticles (CuNPs). A novel polyvinyl alcohol–chitosan–dandelion–CuNP (PVA/CTS/DAN/CuNP) gel was acquired by cross-linking Polyvinyl alcohol (PVA) and chitosan (CTS) solution. Its structure was analyzed using Fourier transform infrared spectroscopy, Scanning electron microscopy, and X-ray diffraction. The PVA/CTS/DAN/CuNP gels manifested good stability, recycling ability, swelling properties, and biocompatibility. Using the agar diffusion method, the diameters of the inhibition zone of the composite gel against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa could be over 21 mm. In conclusion, the PVA/CTS/DAN/CuNP composite gel had good antibacterial performance, which has a high potential for application in microbial contamination treatment and environmental protection.

Microencapsulation of Betalains Extracted from Garambullo (Myrtillocactus geometrizans) to Produce Active Chitosan-Polyvinyl Alcohol Films with Delayed Release of Bioactive Compounds.

Garambullo is a plant with little industrial application. However, garambullo contains betalains, photosensitive phytochemical compounds, which through microencapsulation can be used in chitosan-polyvinyl alcohol (PVOH) films for application in tomato coatings. These biopackages were characterized by physical tests, water vapor permeability, puncture tests, extension, color, differential scanning calorimetry (DCS), Fourier transform infrared (FTIR) spectroscopy, and antioxidant and antimicrobial activity analyses. The influence of the biopackages on the tomato coatings was measured using parameters such as minimum weight loss close to 2% at day 9, pH of 4.6, Brix of 5.5, titratable acidity of 1 g acid/100 mL sample, and shelf life of up to 18 days. The biopackages containing betalain microcapsules had a water vapor permeability of 2 × 10-14 g/h·m·Pa and an elongation of 5 ± 0.5%, indicating that the package did not stretch. The deformation at the breaking point for the package without and with microcapsules was 0.569 and 1.620, respectively. With respect to color, adding white microcapsules and betalains can cause the material to darken, resulting in a yellowish color. Furthermore, the phenolic content was greater for the biopackages with betalains, while there was no significant difference in the antioxidant activity since the active compounds were not released. According to the in vitro results, the inhibition of B. cinerea was achieved on the eighth day when the active compounds were released from the microcapsules. The tomato with betalains lost 2% of its weight, and B. cinerea was inhibited, extending its shelf life to 18 days. The proposed biopackages have good properties as biopolymers and inhibit the presence of B. cinerea.

Fabrication of multifunctional ZnO@tannic acid nanoparticles embedded in chitosan and polyvinyl alcohol blend packaging film

The current study explores biodegradable packaging materials that have high food quality assurance, as food deterioration is mostly caused by UV degradation and oxidation, which can result in bad flavor and nutrition shortages. Thus, new multifunctional zinc oxide nanoparticles/tannic acid (ZnO@TA) with antioxidant and antibacterial activities were incorporated into polyvinyl alcohol/chitosan (PVA/CH) composite films with different ratios (1%, 3%, and 5% based on the total dry weight of the film) via a solution blending method in a neutral aqueous solution. Additionally, ZnO nanoparticles have unique antibacterial mechanisms through the generation of excessive reactive oxygen species (ROS) that may lead to intensify pathogen resistance to conventional antibacterial agents. Thus, minimizing the negative effects caused by excessive levels of ROS may be possible by developing unique, multifunctional ZnO nanoparticles with antioxidant potential via coordination bond between tannic acid and ZnO nanoparticles (ZnO@TA). ZnO@TA nanoparticles were examined using Fourier-transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The effect of the incorporation of ZnO@TA nanoparticles on the barrier, mechanical, thermal, antioxidant, antimicrobial, and UV blocking characteristics of chitosan/polyvinyl alcohol (ZnO@TA@CH/PVA) films was investigated. The lowest water vapor and oxygen permeability and the maximum antioxidant capacity% are 31.98 ± 1.68 g mm/m2 kPa day, 0.144 ± 5.03 × 10–2 c.c/m2.day, and 69.35 ± 1.6%, respectively, which are related to ZnO@TA(50)@CH/PVA. Furthermore, ZnO@TA(50)@CH/PVA film exhibits the maximum UV shielding capacity of UVB (99.994). ZnO@TA(50) @PVA/CH films displayed better tensile strength and Young`s modulus of 48.72 ± 0.23 MPa and 2163.46 ± 61.4 MPa, respectively, than the other film formulations. However, elongation % at break exhibited the most reduced value of 19.62 ± 2.3%. ZnO@TA@CH/PVA film exhibits the largest inhibition zones of 11 ± 1.0, 12.3 ± 0.57, and 13.6 ± 0.57 mm against Staphylococcus aureus, Aspergillus flavus, and Candida albicans, respectively. In accordance with these results, ZnO@TA@CH/PVA films could be utilized for food preservation for the long-term.

The Effect of Nanoclay Type on the Mechanical Properties and Antibacterial Activity of Chitosan/PVA Nanocomposite Films

Nanoclays are a class of nanomaterials extensively used to prepare polymer nanocomposites. In this study, four types of common nanoclays were selected to prepare chitosan–polyvinyl alcohol (CP) nanocomposite films. Montmorillonite cloisite Na+ (MMT), organically modified montmorillonite (OMMT), and bentonite (BNT), as layered aluminosilicates, and halloysite nanotubes (HNT), as a tubular nanoclay, were blended with CP films at concentrations of 1.5, 3 and 4.5%. The nanocomposite films were characterized by FTIR, XRD, SEM/EDX, AFM, tensile strength, and antibacterial tests. SEM/EDX results showed a more uniform distribution of the OMMT and HNT nanoclays in the polymer matrix. AFM images showed a rougher surface for nanocomposite films compared to CP film. Increasing the nanoclay concentration in the films from 1.5 to 4.5% resulted in higher tensile strength for HNT and MMT while the trend was reversed for OMMT and BNT. Among the samples, nanocomposite films composed of OMMT and BNT showed the highest tensile strength at the lowest concentrations (CP-OMMT1.5 99 ± 3.7 MPa, CP-B1.5 81 ± 1.5 MPa). The nanocomposite films prepared from OMMT showed the highest antibacterial activity against E. coli and S. aureus with an inhibition zone of 15 and 19 mm, respectively. The results of this study showed that BNT and OMMT are promising nanoclays for enhancing the mechanical properties and antibacterial activity of hydrophilic polymers. The results of this research can provide new insights into selecting suitable nanoclays for different applications.

Electrospun film polyvinyl alcohol/chitosan loaded with cinnamon essential oil and inhibitory effects on polyphenol oxidase and dominant spoilage bacteria from Pacific white shrimp

Pacific white shrimp (Litopenaeus vannamei) is prone to melanosis and spoilage during refrigeration. To develop an active packaging material with inhibitory effects on polyphenol oxidase (PPO) (related with melanosis) and specific spoilage organisms of refrigerated spoilage Litopenaeus vannamei (Lv-SSOs), one degradable polyvinyl alcohol-chitosan (PVA-CS) fibrous mats encapsulating cinnamon essential oil (CEO) were fabricated by electrospinning. Compared to PVA-CS, the transparency, tensile strength and water contract angle of CEO-loaded electrospun film (CEO/PVA-CS) were all significant increased. CEO molecules uniformly dispersed between PVA-CS fiber bundles without any visible gaps under scanning electron microscopy observation. Fourier transform infrared spectroscopy and X-ray diffraction analyses revealed that CEO successfully embedded into PVA-CS matrix through inter-molecular forces, thus improving the compact of CEO/PVA-CS. In simulate food systems (4 °C and 25 °C), the release patterns of CEO from CEO/PVA-CS fit well to Higuchi and Rigter-Peppas models, and could be explained by the Fickian diffusion mechanism. At refrigeration (4 °C), CEO/PVA-CS had 57.52 ± 3.33% inhibition rate on PPO, extracted from the cephalothorax of Litopenaeus vannamei, after 7 h of interaction. Moreover, CEO/PVA-CS effectively inhibited Lv-SSOs growth at 4 °C. Therefore, the electrospun film of CEO/PVA-CS should have potential application prospects in delaying melanosis and spoilage of refrigerated shrimp.

Valorization of Olive Pomace Using Ultrasound-Assisted Extraction for Application in Active Packaging Films.

Bioactive compounds that can be recovered by the solid wastes of the olive oil sector, such as polyphenols, are known for their significant antioxidant and antimicrobial activities with potential application in nutraceutical, cosmetic, and food industries. Given that industrial demands are growing, and the polyphenol market value is ever increasing, a systematic study on the recovery of natural antioxidant compounds from olive pomace using ultrasound-assisted extraction (UAE) was conducted. Single-factor parameters, i.e., the extraction solvent, time, and solid-to-liquid ratio, were investigated evaluating the total phenolic content (TPC) recovery and the antioxidant activity of the final extract. The acetone-water system (50% v/v, 20 min, 1:20 g mL-1) exhibited the highest total phenolic content recovery (168.8 ± 5.5 mg GAE per g of dry extract). The olive pomace extract (OPE) was further assessed for its antioxidant and antibacterial activities. In DPPH, ABTS, and CUPRAC, OPE exhibited an antioxidant capacity of 413.6 ± 1.9, 162.72 ± 3.36 and 384.9 ± 7.86 mg TE per g of dry extract, respectively. The antibacterial study showed that OPE attained a minimum inhibitory activity (MIC) of 2.5 mg mL-1 against E. coli and 10 mg mL-1 against B. subtilis. Hydroxytyrosol and tyrosol were identified as the major phenolic compounds of OPE. Furthermore, active chitosan-polyvinyl alcohol (CHT/PVA) films were prepared using different OPE loadings (0.01-0.1%, w/v). OPE-enriched films showed a dose-dependent antiradical scavenging activity reaching 85.7 ± 4.6% (ABTS) and inhibition growth up to 81% against B. subtilis compared to the control film. Increased UV light barrier ability was also observed for the films containing OPE. These results indicate that OPE is a valuable source of phenolic compounds with promising biological activities that can be exploited for developing multifunctional food packaging materials.

Silver nanoparticles stabilized by chitosan-polyvinyl alcohol polymers mediated by Pistacia extract for treatment of functional dyspepsia and gastric cancer

The impact of the nanoparticles on the dyspepsia mice gut microbiota is evaluated through the utilization of the 16S rRNA technique. Various methods were employed to characterize the NPs. In the textile, culinary, paper, leather, and printing sectors, synthetic dyes are frequently employed as coloring agents. Because these dye molecules are harmful to both the environment and living things, it is difficult to remove them sustainably. Here, we have produced nanoparticles embedded in chitosan-polyvinyl alcohol hydrogel (CS-PVA) by using bark's Pistacia under ultrasonic irradiation. The reduction of Ag + ions into Ag0 NPs was detected by a visual change in the colors. UV–Vis analysis indicated that the characteristic SPR band appeared near ∼440–450 nm. UV/Vis, EDX-elemental mapping, SEM, TEM, ICP-OES, and XRD analysis were applied to characterize the Ag NPs/CS-PVA nanocomposite. The recent study focused on the cellular and molecular aspects. The MTT assay was conducted for 48 h to evaluate the anti-human gastric cancer and cytotoxicity efficacies of the treated cells with nanocomposite. The assessment was performed on normal (HUVEC) and gastric cancer cells, namely MKN45 and NCI–N87. The IC50 values of nanocomposite against MKN45 and NCI–N87 were 180 and 151 μg/mL, respectively. The dose-dependent reduction in malignant gastric cell viability was observed in the nanocomposite presence. Furthermore, the nanocomposite induced cell apoptosis by 40–50%, leading to an increase in the expression of pro-apoptotic markers (Bax and cleaved caspase-8) and a decrease in the expression of the anti-apoptotic marker, Bcl-2. Furthermore, the nanocomposite showed inhibitory effects on colony formation. Our results indicate that the nanocomposite can increase p53 expression and decrease the expression of STAT3 in treated cells. This indicates that p53 and STAT3 play crucial roles in the biological effects induced by the extract in human gastric carcinoma cells. The data from the gut microbiome suggested that nanocomposites have the ability to control the rebalancing of homeostasis and microbiome composition by decreasing the levels of harmful bacteria, and at the same time, increasing the levels of beneficial bacteria. Following the introduction of nanocomposite, there was an observed rise in the levels of gastrointestinal hormones in the serum, including gastrin and motilin, while the levels of vasoactive intestinal peptide decreased. The application of nanocomposite led to an improvement in gastrointestinal movement, encompassing a rise in the rate of transit through the small intestine and the rate of gastric emptying. These findings offer that the Ag NPs/CS-PVA nanocomposite could be a promising anticancer treatment for functional dyspepsia and gastric cancer.

Multifunctional polymeric nanofibrous scaffolds enriched with azilsartan medoxomil for enhanced wound healing.

A prolonged and compromised wound healing process poses a significant clinical challenge, necessitating innovative solutions. This research investigates the potential application of nanotechnology-based formulations, specifically nanofiber (NF) scaffolds, in addressing this issue. The study focuses on the development and characterization of multifunctional nanofibrous scaffolds (AZL-CS/PVA-NF) composed of azilsartan medoxomil (AZL) enriched chitosan/polyvinyl alcohol (CS/PVA) through electrospinning. The scaffolds underwent comprehensive characterization both in vitro and in vivo. The mean diameter and tensile strength of AZL-CS/PVA-NF were determined to be 240.42 ± 3.55nm and 18.05 ± 1.18MPa, respectively. A notable drug release rate of 93.86 ± 2.04%, was observed from AZL-CS/PVA-NF over 48h at pH 7.4. Moreover, AZL-CS/PVA-NF exhibited potent antimicrobial efficacy for Staphylococcus aureus and Pseudomonas aeruginosa. The expression levels of Akt and CD31 were significantly elevated, while Stat3 showed a decrease, indicating a heightened tissue regeneration rate with AZL-CS/PVA-NF compared to other treatment groups. In vivo ELISA findings revealed reduced inflammatory markers (IL-6, IL-1β, TNF-α) within treated skin tissue, implying a beneficial effect on injury repair. The comprehensive findings of the present endeavour underscore the superior wound healing activity of the developed AZL-CS/PVA-NF scaffolds in a Wistar rat full-thickness excision wound model. This indicates their potential as novel carriers for drugs and dressings in the field of wound care.

Co electrospinning -poly (vinyl alcohol)-chitosan/gelatin-poly (ϵ-caprolacton) nanofibers for diabetic wound-healing application

With the increasing prevalence of diabetes, the healing of diabetic wounds has become a significant challenge for both healthcare professionals and patients. Recognizing the urgent need for effective solutions, it is crucial to develop suitable scaffolds specifically tailored for diabetic wound healing. In line with this objective, we have developed novel hybrid nanofibrous scaffolds by combining polyvinyl alcohol/chitosan (PVA/CS) and gelatin/poly(ε-caprolactone) (Gel/PCL) polymers through a double-nozzle electrospinning technique. In this study, we investigated the influence of the Gel/PCL blend ratio on the properties of the resulting nanofibers. Three different hybrid scaffold structures were examined: Gel/PCL (80:20)-PVA/CS (80:20), Gel/PCL (50:50)-PVA/CS (80:20), and Gel/PVA (20:80)-PVA/CS (80:20). Our findings demonstrate that the electrospun nanofibers of PVA/CS (80:20)-Gel/PCL (80:20) exhibited optimal mechanical performance, with a contact angle of approximately 54° and a diameter of 183 nm. Considering the crucial role of inhibiting bacterial adhesion in the success of implanted materials, we evaluated the cytocompatibility of the hybrid electrospun nanofibers using mouse fibroblast cells (L-929 cells). The in vitro cytotoxicity results obtained from L-929 fibroblast cell culture on the hybrid scaffolds revealed enhanced cell proliferation and appropriate cell morphology on the PVA/CS (80:20)-Gel/PCL (80:20) sample, indicating its capability to support tissue cell integration. Based on the information obtained from this study, the fabricated hybrid scaffold holds great promise for diabetic ulcer healing. Its optimal mechanical properties, suitable contact angle, and favorable cytocompatibility highlight its potential as a valuable tool in the field of diabetic wound healing. The development of such hybrid scaffolds represents a significant step forward in addressing the challenges associated with diabetic wound care.