Application Of Chitosan Research Articles

Synthesis and application of chitosan and orange peel biocomposites for cadmium (II) removal from water

Synthesis and application of chitosan and orange peel biocomposites for cadmium (II) removal from water

Effects of chitosan on plant growth under stress conditions: similarities with plant growth promoting bacteria

The agricultural use of synthetic pesticides, fertilizers, and growth regulators may represent a serious public health and environmental problem worldwide. All this has prompted the exploration of alternative chemical compounds, leading to exploring the potential of chitosan and PGPB in agricultural systems as a potential biotechnological solution to establish novel agricultural production practices that not only result in fewer adverse impacts on health and the environment but also improve the resilience and growth of the plants. In this work, an analysis of the impact of plant growth-promoting bacteria (PGPB) and chitosan on plant growth and protection has been conducted, emphasizing the crucial bioactivities of the resistance of the plants to both biotic and abiotic stressors. These include inducing phytohormone production, mobilization of insoluble soil nutrients, biological nitrogen fixation, ethylene level regulation, controlling soil phytopathogens, etc. Moreover, some relevant aspects of chitin and chitosan are discussed, including their chemical structures, sources, and how their physical properties are related to beneficial effects on agricultural applications and mechanisms of action. The effects of PGPB and chitosan on photosynthesis, germination, root development, and protection against plant diseases have been compared, emphasizing the intriguing similarities and synergistic effects observed in some of these aspects. Although currently there are limited studies focused on the combined application of PGPB and chitosan, it would be important to consider the similarities highlighted in this work, and those that may emerge in future studies or through well-designed investigations, because these could permit advancing towards a greater knowledge of these systems and to obtain better formulations by combining these bioproducts, especially for use in the new contexts of sustainable agriculture. Thus, it seems feasible to augur a promising near future for these combinations, considering the wide range of possibilities offered by chitinous biomaterials for the development of innovative formulations, as well as allowing different application methods. Likewise, the studies related to the PGPB effects on plant growth appear to be expanding due to ongoing research to test on plants the impacts of microorganisms derived from different environments, whether known or recently discovered, making it a very exciting field of research.

Effect of Application of Chitosan Soil Drenching on Growth and Vigour of Mango (Mangifera indica L.) Grafts Cv. Alphonso

An experiment on effect of application of chitosan on growth and vigour of mango grafts cv. Alphonso was conducted at Department of Fruit Science, College of Horticulture, Dapoli, Dr. Balasaheb Sawant Konkan Krishi Vidyapeeth, Dapoli during the year 2023-24. Seven treatments and 4 replications in Randomized Block Design viz., Tl Control – Soil + FYM (3:1), T2 (Chitosan 0.5 %), T3 (Chitosan 1.0 %), T4 (Chitosan 1.5 %), T5 (Chitosan 2.0 %), T6 (Chitosan 2.5 %), T7 (Chitosan 3.0 %) with the aim to investigate effect of chitosan drenching on growth, vigour and survival of mango grafts cv. Alphonso. The highest survival percentage (99.13 %), height of the grafts (38.10 cm), number of shoots per graft (2.06 nos.), number of leaves per graft (32.13 nos.) leaf area (694.31 cm 2) were recorded in treatment T5 i.e. Chitosan 2.0 %. The maximum stem girth (10.24 mm) found in treatment T7 i.e Chitosan 3.0 %.

Application of calcium hypochlorite and carboxymethyl chitosan as combined depressants for selective flotation separation of chalcopyrite from pyrite at low alkalinity

Flotation separation of copper-sulfur at low alkalinity has attracted soaring interest in the beneficiation of copper sulfide ore. In this work, application of calcium hypochlorite (Ca(ClO)2) and carboxymethyl chitosan (OCMC) as combined depressants for selective flotation separation of chalcopyrite from pyrite was investigated. A maximum recovery difference of 71.35 % between both minerals is observed under the recommended conditions ([Ca(ClO)2] = 60 mg/L, [OCMC] = 400 mg/L and 40 mg/L SBX at pH=8). Besides, the copper-sulfur flotation separation indexes were assessed by the artificial mixed-mineral tests. Results of contact angle measurement, zeta potential and adsorption amount analysis reveal that the combined depressants severely impede the collector adsorption onto pyrite surfaces, and has a light effect on the chalcopyrite. OCMC exhibits a stronger complexing ability on Ca2+ and Fe2+ ions than Cu2+ ions. XPS results confirm that the combined depressant interact with pyrite surfaces intensively, and prompt a deep conversion of S22- and Sn2-/S0 into S2- and SO42- species, as well as a deep transformation of Fe(II)-S into Fe(III)-O/OH on the pyrite surface. ToF-SIMS and thermodynamic calculation results afford the favorable evidence for the selective suppression of the pyrite with added the combined depressant. Thereby the selective oxidation and intense complexation on the pyrite stemming from the combined depressant synergy are responsible for the selective separation of chalcopyrite from pyrite.

Recent Advances in the Preparation, Antibacterial Mechanisms, and Applications of Chitosan

Chitosan, a cationic polysaccharide derived from the deacetylation of chitin, is widely distributed in nature. Its antibacterial activity, biocompatibility, biodegradability, and non-toxicity have given it extensive uses in medicine, food, and cosmetics. However, the significant impact of variations in the physicochemical properties of chitosan extracted from different sources on its application efficacy, as well as the considerable differences in its antimicrobial mechanisms under varying conditions, limit the full realization of its biological functions. Therefore, this paper provides a comprehensive review of the structural characteristics of chitosan, its preparation methods from different sources, its antimicrobial mechanisms, and the factors influencing its antimicrobial efficacy. Furthermore, we highlight the latest applications of chitosan and its derivatives across various fields. We found that the use of microbial extraction shows promise as a new method for producing high-quality chitosan. By analyzing the different physicochemical properties of chitosan from various sources and the application of chitosan-based materials (such as nanoparticles, films, sponges, and hydrogels) prepared using different methods in biomedicine, food, agriculture, and cosmetics, we expect these findings to provide theoretical support for the broader utilization of chitosan.

Effect of Foliar Application of Boron, Salicylic Acid, and Chitosan on Growth and Fruiting of “Festival” Strawberry

Effect of Foliar Application of Boron, Salicylic Acid, and Chitosan on Growth and Fruiting of “Festival” Strawberry

Exogenous Application of Chitosan Mitigates the Inhibitory Effects of Zinc on the Growth of Wheat Seedlings by Modulating Zn Transport and ROS Scavenging

Exogenous Application of Chitosan Mitigates the Inhibitory Effects of Zinc on the Growth of Wheat Seedlings by Modulating Zn Transport and ROS Scavenging

Biofunctional applications of Chitosan in Dentistry – An Overview

Chitosan due to its unique properties has attracted materials scientists globally to explore it for bio-dental applications. In dentistry, chitosan is also shown wide applications. The creation of effective biomaterials for the prevention and treatment of dental disorders is a challenge for researchers in the present scenario. The natural semi-synthetic polysaccharide based biomaterial Chitosan is obtained from the marine source chitin. Due to its peculiar characteristics, chitosan offers benefits in biomedicine and can be utilized in the development of capsules (micro and nanoparticles), powders, scaffolds, films, beads, hydrogels, and bandages. Chitosan offers its benefits as an anti-microbial agent, mucoadhesive, biomimetic mineralization Teeth hardening action due to its remineralizing property which leads to the search and focus of chitosan towards dental applications. Translation of research to clinical applications is better suited for chitosan in terms of its multifactorial activities. Therefore, this article provides an overview of chitosan, which mainly covers the basic information of chitosan, with a focus on different techniques of preparation of chitosan based formulations. It also explores the usage of chitosan in the treatment of various dental disorders.

Bio synthesis of chitosan from shrimp shell chitin using Streptomyces griseoincarnatus RB7AG:Characterization and application as coating material to enhance shelf life of tomatoes (var. Ruby pusa) in post-harvest storgae condition

In this investigation, chitosan was successfully obtained from shrimp shell chitin through microbial degradation by Streptomyces griseoincarnatus RB7AG. The resulting chitosan showcased remarkable characteristics, including high solubility, a high degree of deacetylation, a well-defined crystalline structure, and a rough surface with minimal pores. The application of chitosan as a coating material for tomatoes demonstrated significant preservation benefits compared to commercially available chitosan. The chitosan coating proved effective in minimizing weight loss, reducing the production of reactive oxygen species (ROS), and preserving essential compounds such as anthocyanin content and antioxidant enzymes in tomatoes. Firstly, the chitosan coating served as a physical barrier, preventing moisture loss and maintaining the tomatoes' structural integrity. Secondly, the antimicrobial properties of chitosan hindered the growth of spoilage-causing microorganisms, extending the shelf life of the tomatoes. Additionally, the chitosan coating exhibited antioxidant properties, scavenging ROS and preserving the natural antioxidants in tomatoes. Furthermore, the chitosan coating facilitated controlled gas exchange, allowing optimal levels of oxygen and carbon dioxide to maintain the freshness of the tomatoes without accelerating the ripening process. With the help of the above-mentioned mechanisms, the potential of the microbially synthesized chitosan to enhance the shelf life of the tomatoes can be explained which was found better than the commercially synthesized chitosan coating. This research underscores the potential of microbially synthesized chitosan as an effective coating material but also provides insights into the intricate mechanisms involved in preserving tomatoes. The findings pave the way for innovative applications of chitosan-based coatings in the food industry, ensuring prolonged freshness and nutritional quality of perishable fruits and vegetables.

Effects of Foliar Application of Chitosan on Some Vegetative Growth and Biochemical Parameters of Strawberry Under Salt Stress

Effects of Foliar Application of Chitosan on Some Vegetative Growth and Biochemical Parameters of Strawberry Under Salt Stress

In situ synthesis of nano-CeO2 and chitosan composite

Nanosized cerium oxide (CeO2) particles were prepared by co-precipitation method using chitosan as a template, cerium (III) nitrate and cerium (IV) sulfate as starting materials and aqueous ammonia solution as a precipitating agent. XRD data indicate that cerianite with face-centered cubic phase is formed in the reaction systems. The size of the coherent scattering regions is about 3 nm or less. FTIR spectroscopy data indicate the interaction of polymer molecules with the inorganic component. The shift of absorption bands related to N-H bonds for composites with Ce(III) and Ce(IV) compared to chitosan indicates the interaction of amino groups with CeO2 particles. The application of chitosan as a matrix for the synthesis of CeO2 nanoparticles showed that this approach is more economical and easier to produce nanomaterials for various applications.

Regulation of Physiological and Biochemical Mechanisms Related to Water Stress Tolerance in Barley and Improvement of Growth and Productivity Using Salicylic Acid and Chitosan

The present investigation aimed to assess the impacts of three Salicylic Acid (SA) concentrations (T2=100, T3=200, T4=300ppm), three Chitosan concentrations (T5=150, T6=225, T7=300ppm) and T8= Salicylic Acid (100 ppm) with Chitosan (150 ppm) mixture in comparison to control treatment (T1) on two barley cultivars Giza126 and Giza 134 under rainfed conditions. Some vegetative and yield traits were recorded, plant height, spike length, number of gains spike-1, number of spikes/m2, 1000 grain weight, biological and grain yield. A split plot design was performed with three replications. The field experiment was conducted in the northern west coast region of Egypt (Marsa Matruh government) under the rainfed condi­tions during 2019/2020 and 2020/2021 growing seasons. The results showed a direct relationship between increased foliar application and increased yield attributes. Results indicated that Giza 126 cultivar as affected by T4 showed the most desirable values for grains spikes-1 in first season, spikes/m2, biological yield and grain yield during the first and second seasons respectively. In addition, barley cultivar Giza 126 as affected by T3 showed the highest values for grains spikes-1 in second season. On the other hand, barley cultivar Giza 134 as affected by T4 showed the highest values for plant height, spike length and 1000-grain weight in first and second seasons respectively. From results, it can be concluded that the Salicylic Acid (SA) concentration 300 ppm is recommendable for improving the productivity of barley under rainfed conditions of Egypt. To study the potential role of SA and Chitosan on water stress tolerance mechanisms some biochemical and physiological parameters were recorded. Application of SA and Chitosan decreased significantly Reactive Oxygen Species (ROS) measuring by determined the concentrations of MDA and H2O2 especially SA with concentrations 300 ppm (T4). For osmolytes (proline, SSC and SPC), all treatments using SA and Chitosan induced significant increase in osmolytes content compared with control under water stress only in the two studied barley genotypes, except for treatment with Chitosan 225 and 300 ppm in Giza 126 for proline content. Similar results were recorded for antioxidant enzymes activity (CAT, POX and PPO) which showed up-regulation for all treatments compared with control under water stress for the two studied genotypes. On contrast, APX antioxidant enzyme recorded the highest activity in control treatment under water stress only. In general, for all studied treatments comparing with control, application of SA300 ppm and the mixture between SA100 and Chitosan150 ppm were the best treatment for induction of up and down regulation of biochemical and physiological component in the barley cells which is known as defense system against water stress damage.

Enhancing the effect of novel cd mobilization bacteria on phytoremediation and microecology of cadmium contaminated soil

The efficacy of phytoextraction for remediating heavy-metal contaminated soil depends on the bioavailability of the heavy metals and plant growth. In this study, we employed a synergistic system comprising water-soluble chitosan and the novel Cd mobilization bacteria, Serratia sp. K6 (hereafter K6), to enhance cadmium (Cd) extraction by Lolium perenne L. (ryegrass). The application of chitosan and K6 resulted in an increase in the biomass of ryegrass by 11.81% and Cd accumulation by 73.99% and effective-state Cd by 43.69% and pH decreased by 4.67%, compared to the control group. Microbiome and metabolomics analyses revealed significant alterations in the inter-root microbial ommunity, with rhizobacteria such as Sphingomonas, Nocardioides, and Bacillus likely contributing to enhanced plant growth and Cd accumulation in response to chitosan and K6 addition. Additionally, the contents of various organic acids, amino acids, lipids, and other metabolites exhibited significant changes under different additive treatments, suggesting that ryegrass can regulate its own metabolites to resist Cd stress. This study provides valuable insights into the effects of additives on phytoextraction efficiency and the soil bacterial community, offering a promising approach for phytoremediation of Cd-contaminated soils.

Protective effects of the exogenous application of salicylic acid and chitosan on chromium-induced photosynthetic capacity and osmotic adjustment in Aconitum napellus.

Chitosan (CTS) is recognized for enhancing a plant's resilience to various environmental stresses, such as salinity and drought. Moreover, salicylic acid (SA) is acknowledged as a growth regulator involved in addressing metal toxicity. However, the effectiveness of both compounds in mitigating Cr-induced stress has remained relatively unexplored, especially in the case of Aconitum napellus, a medicinally and floricultural important plant. Therefore, the primary objective of this study was to investigate the potential of CTS and SA in alleviating chromium (Cr)-induced stress in A. napellus. To address these research questions, we conducted a controlled experiment using potted plants to evaluate the individual and combined impacts of CTS and SA on plants exposed to Cr stress. Foliar application of CTS (0.4g/L) or SA (0.25 mmol/L) led to significant improvements in the growth, chlorophyll content, fluorescence, and photosynthetic traits of A. napellus plants under Cr stress. The most notable effects were observed with the combined application of CTS and SA, resulting in increases in various morphological parameters, such as shoot length (2.89% and 7.02%) and root length (27.75% and 3.36%) under the Cr 1 and Cr 2 treatments, respectively. Additionally, several physiological parameters, such as chlorophyll a (762.5% and 145.56%), chlorophyll b (762.5% and 145.56%), carotenoid (17.03% and 28.57%), and anthocyanin (112.01% and 47.96%) contents, were notably improved under the Cr 1 and Cr 2 treatments, respectively. Moreover, the combined treatment of CTS and SA improved the fluorescence parameters while decreasing the levels of enzymatic antioxidants such as catalase (27.59% and 43.79%, respectively). The application also notably increased osmoprotectant parameters, such as the total protein content (54.11% and 20.07%) and the total soluble sugar content (78.17% and 49.82%) in the leaves of A. napellus in the Cr 1 and 2 treatments, respectively. In summary, these results strongly suggest that the simultaneous use of exogenous CTS and SA is an effective strategy for alleviating the detrimental effects of Cr stress on A. napellus. This integrated approach opens promising avenues for further exploration and potential implementation within agricultural production systems.

Chitosan, a Natural Polymer, is an Excellent Sustained-Release Carrier for Amide Local Anesthetics.

Local anesthetics, particularly amide types, play a crucial role in perioperative anesthesia to alleviate pain and manage chronic, long-term pain, with their brief effect period remaining a universal challenge that needs resolution. There is a high anticipation for creating materials that maintain prolonged effectiveness of local anesthetics through a straightforward administration technique. Chitosan is the most typical natural amino polymer, which is highly reactive and easy to modify. It has been widely and deeply used in the field of medicine. At present, it is mainly used in tissue regeneration and repair, hemostasis and wound healing, antibacterial and anti-infection, disease diagnosis and treatment detection, and drug delivery. In the field of anesthesia, chitosan is regarded as a potential perfect carrier for the sustained release of amide local anesthetics. This document aims to analyze the current application of chitosan as a prolonged-release substance in amide-type local anesthetics, encapsulate the associated research advancements, and subsequently investigate the practicality and prospects of its medical uses.

Enhancement of the Production of Tropane Alkaloids in the Hyoscyamus Niger L. Callus Using Different Biotic Elicitors

This study looked at the amount of tropane alkaloids in both the leaves of the mother plant and the callus cultures of Hyoscyamus niger L. It also looked at how biotic elicitation affects the growth of callus cultures and increases the production of alkaloids. The investigation identified and quantified three primary tropane alkaloids (Hyoscyamine, Scopolamine, and Atropine) from both sources. Remarkably, the callus cultures exhibited obviously higher levels of alkaloids in comparison to the leaves of the mother plant, implying their potential as a valuable reservoir for alkaloid production. Concerning the effects of biotic elicitation, the study showed that the application of chitosan (CHT), yeast extract (YE), and fungal extract of Trichoderma asperellum yielded a substantial decrease in callus weight when contrasted with the control group. This decrease became more pronounced with escalating concentrations of the elicitors. In terms of alkaloid synthesis, a clear correlation between the concentration of bio stimulants and tropane alkaloid levels was established. Particularly, CHT elicitation displayed the most pronounced enhancement in levels of tropane alkaloids among the three elicitors. Notably, the highest CHT concentration of 40 mg/L yielded the most elevated levels of alkaloids, measuring at 25.3 µg/g for Hyoscyamine, 31.2 µg/g for Scopolamine, and 21.5 µg/g for Atropine. This represents approximate percentage increases in concentration of 208%, 183%, and 198%, respectively, when compared to the control treatment. Generally, these findings carry significant implications for advancing tropane alkaloid biosynthesis, with potential applications spanning the pharmaceutical and biotechnology sectors.

Synthesis of Sulfonated Chitosan as An Active Agent of Antibacterial Packaging for Fish Fillets

Modifying chitosan by increasing its hydrophilic properties through sulfonation reactions will increase its solubility in water and antibacterial activity and expand the application of chitosan. This study aims to determine the antibacterial activity of sulfonated chitosan film applied as fish fillet packaging using the total plate count method. Sulfonated chitosan in this study was successfully synthesized by reacting chitosan with 1,3-propane sultone. Sulfonated chitosan products were characterized using FTIR and UV-Vis spectrophotometers, while antibacterial activity was measured using the disc diffusion method. The optimum temperature for sulfonated chitosan synthesis was 60°C (SCS60). The resulting SCS 60 was a yellowish-white solid soluble in water with a yield of 61.46% and a degree of substitution of 33%. The diameters of the SCS 60 inhibition zone against E. coli and S. aureus isolates were 7 and 10 mm, respectively. SCS60-gelatin film is elastic (elongation 272%) and more hydrophobic with a contact angle of 90.12° compared to chitosan-gelatin film (62.8°). SCC60-gelatin film was able to suppress bacterial growth in fish fillets by up to 0.3 × 104 cfu/g compared to unpackaged fish (30 × 104 cfu/g). Sulfonated chitosan has the potential to be an antibacterial food packaging material.

RESPONSE OF THE ‘POLESIE’ RASPBERRY CULTIVAR TO FOLIAR APPLICATION OF CHITOSAN WITH DIFFERENT MOLECULAR WEIGHTS

This study explored the effects of chitosan, a biodegradable and non-toxic natural polymer derived from chitin, on the yield and quality of raspberries. Various molecular weights (3.3–950 kDa) were assessed to determine the impact on raspberry plants and fruit development. These applications were made during key growth phases – the start of the vegetation period, during flowering and at the fruit-bearing stage – using a foliar method to ensure full coverage of both leaves and fruit without runoff. The results indicated that chitosan application influenced various parameters of fruit quality, including firmness, colour and antioxidant levels. Notably, chitosan with a molecular weight of 21 and 50 kDa significantly enhanced fruit yield and size compared with the control. Conversely, chitosan with a higher molecular weight (500 and 950 kDa) did not improve yield and appeared to induce stress in plants, although they did contribute to increased fruit firmness and potentially extended the shelf life due to their film-forming capabilities. The findings suggest that while chitosan can improve the yield and quality of raspberries, the effectiveness is highly dependent on its molecular weight. These results support the potential of chitosan as an alternative to traditional chemical treatments, promising a reduction in chemical inputs while sustaining or enhancing agricultural productivity and fruit quality.

Isolation, Characterization, Purification and Analysis and Application of Chitosan extracted from Aspergillus flavus

Isolation, Characterization, Purification and Analysis and Application of Chitosan extracted from Aspergillus flavus

Chitosan-Peptide Composites for Tissue Engineering Applications: Advances in Treatment Strategies.

One of the most well-known instances of an interdisciplinary subject is tissue engineering, where experts from many backgrounds collaborate to address important health issues and improve people's quality of life. Many researchers are interested in using chitosan and its derivatives as an alternative to fabricating scaffold engineering and skin grafts in tissue because of its natural abundance, affordability, biodegradability, biocompatibility, and wound healing properties. Nanomaterials based on peptides can provide cells with the essential biological cues required to promote cellular adhesion and are easily fabricated. Due to such worthy properties of chitosan and peptide, they find their application in tissue engineering and regeneration processes. The implementation of hybrids of chitosan and peptide is increasing in the field of tissue engineering and scaffolding for improved cellular adherence and bioactivity. This review covers the individual applications of peptide and chitosan in tissue engineering and further discusses the role of their conjugates in the same. Here, the recent findings are also discussed, along with studies involving the use of these hybrids in tissue engineering applications.